Use Exchange 2010 OWA Login Page with Exchange 2013

We are planning on upgrading our exchange server from 2010 to 2013. We want to keep 2010 OWA login page with this upgrade. Partly due to educating users to new OWA interface and no plan to upgrade to office 2013 anytime soon.
Questions:
1. Do you or do you not recommend?
2. Is it possible?
3. How to keep 2010 OWA login page during and after migration to 2013 (instructions)?
Thank you!

Hi, EthenLEC
I agree with Andy David.
For additional information, we can change OWA 2013 back to OWA 2010 interface to use light version by the following steps.
Log in to OWA 2013.
Once logged in, click on the settings gear in the upper right corner, choose
Display Settings.
From the Display settings menu, choose Outlook Web App version, then check the box to use the light version.
Sign out of OWA and sign back in. Now it has the OWA 2013 light version.
Best Regards.

Similar Messages

Exchange 2010 OWA login page customization does not work

Where can I post a question regarding Exchange 2010 OWA login page customization? The customization worked before running updates, now all users navigating to the OWA page see the default configuration.

Hello,
You should ask in the
Exchange Previous Versions - Administration, Monitoring, and Performance forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Securing publishing exchange 2010 OWA and ActiveSync with WAP 2012

Hello,
my client have the following environment:
Exchange 2010 sp3
AD 2003
we want to secure activesync and owa by using reverse proxy. TMG/UAG life ends 2015, then we study WAP 2012 and ADFS 3.0. the difficulties is there is not enough experience feedback, specially for this environnement.
Is there any incompatibility ?
do you know good articles and blogs which address this issue ?
Thanks in advance

Are any other options available since posting in June 2014? Specifically for securing ActiveSync connections from smartphones on the Internet. We are running Exchange 2010 in AD 2008
TMG has already transitioned from mainstream to extended support. Not only is there less support now, to my understanding there is still a licensing cost for this product. Paying for a product at EOL seems inadvisable.
Web Access Protocol (WAP) looked like the right choice, but to secure communications from domain users on unknown devices over the Internet requires Exchange 2013 which is "claims aware". Exchange 2010 is not and what we are left with is
configuring WAP in pass-thru mode, allowing unauthenticated Internet traffic into our internal network where the Exchange CAS server is.
Is there any Microsoft solution to authenticate the user before allowing the user's device to connect to our CAS server on our internal network.

Exchange 2010 OWA [Change Number of items to display per page]

Hi Sir,
I have some problem and question ?
I has migrate from exchange 2007 to exchange 2010.
Exchange 2010 OWA cannot Change Number of items to display per page
Exchange 2007 can change number of items to display per page
Exchange 2010 OWA cannot Change Number of items to display per page
You can help me to solved problem and customization?
Thank you.
Boongerd

Hi,
This feature has been moved in Exchange 2010 OWA. However this feature is available in OWA light version. Here are steps to change the settings in OWA light version.
Log in to OWA, click the Use the light version of Outlook Web App
check box on the login page.
Select Options in the upper right hand corner of the screen.
Select Messaging from the left navigation panel.
In the section for "Message Options", change the "Number of items to display per page", select the desired number of messages.
Exchange 2010: OWA versus OWA light.
http://blogs.technet.com/b/ilvancri/archive/2010/04/07/exchange-2010-owa-versus-owa-light.aspx
New Features in Exchange 2010 OWA.
http://technet.microsoft.com/en-us/library/aa998629(v=exchg.141).aspx
Best Regards.

TMG 2010 publishing Exchange 2010 OWA cannot change password if user must change password at first logon is set

Hi,
I have an odd issue whereby if I set "user must change password" on an AD account, the end user cannot logon, they're simply taken back to the OWA login page as if their password is incorrect.
My setup is as follows:
outer TMG -- uses a listener for email.contoso.com and is configured for no authentication.This uses a publishing rule to publish the inner TMG server. This server is not a domain member.
inner TMG - uses a listener for email.contoso.com and is configured for NLTM\kerberos negotiation with forms authentication (Windows Active Directory). This server is a domain member and use a publishing rule to publish the internal CAS. Allow users to change
password is selected in the publishing rules.
Exchange 2010 SP1 - uses integrated windows and basic authentication. Has the appropriate registry key configured to allow users to change their AD password on first logon.
I've registered an snp for "http/email.contoso.com mailserver-dc1", all SSL certificates being used are valid and my configuration used to allow users to login and change their password with "user must change password on first login"
set in AD.
If I launch a web browser on an internal server and point it to email.contoso.com I'm immediately presented with a generic Windows authentication request (similar to what's seen in ADFS) rather than the standard OWA page. No matter what I do, I cannot login
and change my password using the correct URL. However if I point my browser at
http://192.168.4.10/owa I'm prompted to login and I can change my password using the sam credentials.
The only recent changes made are:
- Disabling SSL 3.0 and enabling TLS (http://www.isaserver.org/articles-tutorials/configuration-security/improving-ssl-security-forefront-threat-management-gateway-tmg-2010-published-web-sites.html)
- Replacing the TMG listener certificates so that they now use SHA2 rather than SHA2 (certificates are trusted on each TMG server)
Looking on the outer TMG and the DC logs I can see schannel errors which I believe are related to the problem. TMG monitoring also shows "Failed connection attempt: 1907 The user'spassword must be changed before logging on for the first time"
I've checked that my inner TMG and DC are using the same certificate for server authentication and gone through this guide:
http://blogs.technet.com/b/keithab/archive/2012/02/29/setting-up-and-troubleshooting-ldaps-authentication-in-forefront-tmg-2010.aspx
If I try to use ldp.exe on the inner TMG, I get the error in the pic below
Thanks
IT Support/Everything

Hi,
You could try to analyze the TMG tracing and try the troubleshoot steps in the blog below.
TMG 2010 – FBA, troubleshooting the change password feature
http://blogs.technet.com/b/isablog/archive/2012/05/07/tmg-2010-fba-troubleshooting-the-change-password-feature.aspx
Best Regards,
Joyce

Exchange 2010 OWA usage in Exchange 2013

Hi,
I have Exchange 2010 with Sp3 Currently running in environment, Now we have plan to Migrate it to Exchange 2013.... Total number of mailbox is around 26000.
Before Migration we want below things to keep in mind...
1. We want to Use existing exchange 2010 OWA url ( mail.abc.com ), How to accompolish this as it will take couple of months to migrate all mailbox ?
2. Can i use my Existing Exchange certificate to get the above goal done ?
3. What will be the steps and pre-requsite to achieve the Goal ?
An Early reply would be appreciated !!
Amit

Hi Amit
First Change SCP of Exchange 2010 CAS VIP to Exchange 2013 CAS VIP.
Configure external DNS records accordingly.DNS entries should be pointed to Exchange 2013 CAS from Exchange 2010 CAS.
Ensure that you are having a seperate name for CAS array from external ews url
Outlook Anywhere should be enabled and Url should be external URL which points to Exchange 2013.
Authentication for OUtlook Anywhere should be - NTLM
for OWA exchange 2010 - FBA and windows
Point your new CAS server to the firewall or TMG . Now from exchange 2013 all request will be proxied to 2010 users
You cannot use the same certificate . YOu need to add seperate entries as the host name for new servers will vary
Apply a new certificate with all the required site names included in Exchange 2013 CAS.
Whats more you can refer my blog as well
http://exchangequery.com/2014/05/02/things-to-consider-before-configuring-autodiscover-in-exchange-20102013-coexistence-scenarios/
Cheers :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Exchange 2010 OWA : TMG Error 12302 The server denied the specified Uniform Resource Locator (URL).

Hello All,
We are using TMG2010 (SP2, rollup4) for publishing Exchange 2010 OWA sites. The issue is that after every 10-24 hrs , the TMG server stops logging in OWA sites and start giving below error. Then we have to restart the server one two times or the problem
solves by itself.
I have also install a new server and it is also giving same behavior. On TMG server the exchange edge server and Forefront Protection for exchange is also installed.
Please help to solve this issue.
Denied Connection
-TMG05 5/21/2014 11:44:39 PM
Log type:
Web Proxy (Reverse)
Status: 12302 The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
Rule:
PRC-OWA
Source:
119.157.175.238:56971
Destination:
111.68.105.121:443
Request:
GET http://mail.parc.gov.pk/owa
Filter information:
Req ID: 0e947d98; Compression: client=Yes, server=No, compress rate=0% decompress rate=0% ; FBA cookie: exists=yes, valid=yes, updated=no, logged off=no, client type=public, user activity=yes
Protocol:
https
User:
anonymous
Additional information
Client agent: Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.2; WOW64; Trident/6.0)
Object source: (No source information is available.)
Cache info: 0x0
Processing time: 125 MIME type:

Hi,
A similar thread:
http://social.technet.microsoft.com/Forums/forefront/en-US/e8fdc1bd-f023-4804-ad02-67899d8c7347/the-server-denied-the-specified-uniform-resource-locator-errors12302-ashttp-error-code-of-500?forum=Forefrontedgegeneral
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM

Hello Experts,
We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
We have one dial plan and its SIP URI and Secured.
Looking for high level steps to plan coexistence and upgrade of Unified Messaging from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
Thanks in advance for help.
-DK

Hello Hinte,
Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
1) Install new CAS+MBX Server
2) Move system mailbox as per MS documentation to Exchange 2013 MBX
3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers.
5) Run Exchucutil.ps1
in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
Will this be enough or Do I need to create New Auto attendant or
Haunt Group etc?
Thanks for all the help!

Can Exchange 2007 to be integrated with SharePoint 2013

Can Exchange 2007 to be integrated with SharePoint 2013?

In the sense of using Incoming and Outgoing email, absolutely. But not for other things, like Site Mailboxes, which require Exchange 2013.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G.

Create a login page with NI Security Programmatic Login.vi

Hi everyone,
I'm trying to create a login page that inputs username and password of users, then authorize user information with the Domain Account Manager to recognize user identification.
I google and see the NI Security Programmatic Login.vi can allow me to create a login page and it works. However, I got a problem is to redirect to other pages after authorizing.
NI Security Programmatic Login.vi only outputs some string to show the status of the authentication, it doesnt output boolean like true or fall.
Does anyone has a solution to help me?
Thank you.
This is my screen shot:

Thank you for suggesting me. I've done the checking task but I don't know how to call a subVi.
As you can see in the images I post below, I have a login page with its diagram, and the main page that I want to show after logging in conrrectly.
So should the main page is the subVi or the login page? And can you tell me how to show the main page after logging correctly?
I also don't know how to refresh the page if logging information is incorrect. Do you have any solution?
Thank you so much.

Can i use a 2010 24 led screen with one of the new 2012 macs with thunderbolt technology?

can i use a 2010 24 led screen with one of the new 2012 macs with thunderbolt technology?

Yes. Any standalone display which can be connected to a Mini DisplayPort, with or without an adapter, can be plugged into a Thunderbolt port without any additional adapters.
(65766)

Can I use Bluetooth to pair my iPad with a 2013 Chevrolet Equinox

Can I use Bluetooth to pair my iPad with a 2013 Chevrolet Equinox?

Yes if your Equinox head unit supports the Bluetooth A2DP (Stereo Bluetooth) protocol.

Exchange 2010 all mail clients with internal cached and internal non-cached mode users having connection status issues, login prompt -- external is fine either way

Hello,
I'm seeing an issue that started this past Monday with no recent change to our environment.
External Outlook Anywhere users and Mobile users, OWA users are unaffected.
Internal Users are affected when using Outlook of any version, 2010 or 2013.
-Internal Users normally log into their workstation with their ad credentials, domain joined machines. Outlook opens without credentials prompting ideally.
1 . Using Cached Mode:
a. Login Prompts, slowness - Since Monday, users are getting prompted to login. The prompt goes away after logging in at startup. It is also causing high CPU
on the workstations.
b. Free/Busy, Out of Office doesn't work. I can, however complete auto-setup for a new user, so autodiscover is not completely down for internal users.
c. Checking Connection Status shows connecting status on highlighted entry below without ever establishing connection (just goes away).
The outlook icon in the system tray says "Outlook is requesting data from the server":
2. Using Non-cached mode
a. No Login Prompt at startup, business as usual
b. Free/Busy, Out of Office works fine. Autodiscover is fine.
c. Checking Connection Status shows normal except, it has "casarray URL, then status is referral" it seams to flicker this constantly then go away intermittently.
d. Main issue in non-cached mode is, sometimes a user will log into windows, open outlook and it will not open and says "server is unavailable. Retry, work offline, or cancel" I can try re-opening, same message.
Only after logging out of windows, logging back in, I can get back into outlook. This is not every time, or consistent with specific users, but random.
3. Lync Pop up for credentials often, though entering the password.
URLs are correct. Autodiscover, EWS, etc.
Already tried bypassing our loadmaster load balancer with host files on clients. same issue regardless of casarray node.
Not sure what is going on.
Josh

You have a hybrid configuration with Office 365, right? You didn't provide this valuable piece of information.
In Exchange Online PowerShell run this command:
Get-OrganizationConfig | FL PublicFoldersEnabled
If the value is "Remote" then users with Exchange Online mailboxes are looking to on-premises public folders. Be sure that you have legacy pubic folder interoperability properly configured.
http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Exchange 2010 OWA access on internal LAN login form not working as expected

hi
We have exchange 2010 sp3 installed and working. we have two sites
Site a
1 x CAS
2 X MBX
Site b
1 x cas
2x mbx
site A is the primary site we currently publish owa our through our TMG server located in the DMZ this is working as expected and carries out the forms authentication. our internal domain is company.local but our external domain is company.com
we have created split DNS so that we could use a wildcard cert and to deal with CA new rules. All URL's in Exchange are configured to use the external reference of company.com/
on the IIS server we have a redirection on the root of the site to redirect the requests through to OWA folder and we have basic Authentication enabled. on the OWA folder we have basic and windows authentication.
The problem we have is that when users try to access OWA internally we get username and password box appears once you login with this it then takes you through to the the normal login screen and you have tyo login again I'm thinking that this is the windows
authentication that is causing this but not sure?
also would be good to get an understanding as to what the Authentication, SSL and redirection setting should be set to on your CAS servers as looking at the ECP and autodiscover folder within IIS this currently has a redirect set to go to OWA surely that
cannot be right,
thanks
J

Hi
you are correct, the immediate concern is the double login to owa i do however want to also know what the settings/configuration for Authentication redirection and SSL should be set to on all virtual directories.
we do not have any additional OWA virtual directories just the default
These are the current live servers
Identity                      : ACAS01\owa (Default Web Site)
Url                           : {}
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   : https://email.Company.com.com/owa
ExternalUrl                   : https://email.Company.com/owa
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
ExternalAuthenticationMethods : {Fba}
Identity                      : BCAS01\owa (Default Web Site)
Url                           : {}
Exchange2003Url               : https://www.Companyt.co.uk/
FailbackUrl                   :
InternalUrl                   : https://webmail.Company.com/owa
ExternalUrl                   : https://webmail.Company.com/owa
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
ExternalAuthenticationMethods : {Fba}
These are the new servers which i have just installed
Identity                     : CAS05\owa (Default Web Site)
Url                           : {}
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   : https://webmail.Company.com/owa
ExternalUrl                   : https://webmail.Company.com/owa
InternalAuthenticationMethods : {Basic, Fba, Ntlm, WindowsIntegrated}
ExternalAuthenticationMethods : {Fba}
Identity                      : CAS06\owa (Default Web Site)
Url                           : {}
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   : https://webmail.Company.com/owa
ExternalUrl                   : https://webmail.Company.com/owa
InternalAuthenticationMethods : {Basic, Fba, Ntlm, WindowsIntegrated}
ExternalAuthenticationMethods : {Fba}
Identity                      : CAS04\owa (Default Web Site)
Url                           : {}
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   : https://webmail.Company.com/owa
ExternalUrl                   : https://webmail.Company.com/owa
InternalAuthenticationMethods : {Basic, Fba, Ntlm, WindowsIntegrated}
ExternalAuthenticationMethods : {Fba}
I have noticed that FBA is set on the new servers does this need turning off and if so is this on IIS or in Exchange?
the link that you have provided talks about creating new Vdir for TMG we are looking at removing TMG and replacing it with KEMP load balancers would we still need to have two Vdir to make FBA work internally and externally
to make a new vdir do you need a new IP address? and what are the steps required in Exchange and IIS to get this working.
thanks
Jason

Use Exchange 2010 OWA Login Page with Exchange 2013

Similar Messages

Maybe you are looking for