Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

Similar Messages

I purchased iPad 4th wifi cellular from USA. Now I am using my iPad in Saudi Arabia and 4g signal does not work. Just 3G. Can you help me

Hello
I purchased iPad 4th wifi cellular from USA. Now I am using my iPad in Saudi Arabia and 4g signal does not work. Just 3G. Can you help me?
IS there any tool to fix

The iPad you purchased is designed to support the 4G network in the U.S. There is no tool to fix it. In order to get the 4G signal working in Saudi Arabia, you need to purchase an iPad there.

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

Can you make captions for a slideshow?

can you make captions for a slideshow? otherwise how can i rename the photo so that i can select view titles in the slideshow and use it as a caption?

Jim lo:
Welcome to the Apple Discussions. You can't make captions with iPhoto. You can edit the title of a photo by selecting it and then going to the Info window at the bottom of the Source pane, the "i" button, clicking on the title field and enter what text you'd like.
If you plan on using the slideshow in iDVD then those titles will not show as they will be lost in the "overscan" area that is common to all movies played on TV. You can create the slideshow in iMovie and have lots of control over titles and subtitles and greater control of the audio track, cut, fade in/out, etc.
Do you Twango?

I play Zuma Blitz on FB; Ever since I upgraded to Firefox 4 I can't play the game the darn frog pauses before shooting and it's a mess; you know it's what I enjoy doing and it needs to be fixed can you help me with this??? Thanks

Question
I play Zuma Blitz on FB; Ever since I upgraded to Firefox 4 I can't play the game the darn frog pauses before shooting and it's a mess; you know it's what I enjoy doing and it needs to be fixed can you help me with this??? I am super frustrated ith the situationThanks

Upgrading to firefox 5 and updating my plug-ins helped a bit. Frog is less 'sticky' now, but it's not solved the problem. Java needs to be up to speed or the frog goes into stasis....

My Mac operating system is OSX 10.4.11 and I "replaced" my older version of Firefox with a newer one that does not open with my system. Can you send me an older version of Firefox? Thanks!

My Mac operating system is OSX 10.4.11 and I "replaced" my older version of Firefox with a newer one that does not open with my system. Can you send me an older version of Firefox? Thanks!

You can get Firefox 3.6.20 from here. 
http://www.mozilla.com/en-US/firefox/all-older.html

Windows tells me "an unknown program wants to change this computer; windows does not allow firefox updates to complete.

What can i do about this problem? I click "more details" and find out that the 'unknown program' is firefox. I click to install; but windows does not allow the updates to complete. I let the update window run for over an hour one day... it still did not complete.

Check that you do not run Firefox as Administrator. 
Right-click the Firefox desktop shortcut and choose "Properties". 
Make sure that all items are deselected in the "Compatibility" tab of the Properties window. 
* Privilege Level: "Run this program as Administrator" should not be selected 
* "Run this program in compatibility mode for:" should not be selected 
Also check the Properties of the firefox.exe program in the Firefox program directory.

Can i download previous versions of firefox? the new version does not allow me to use my VPN so i have had to uninstall firefox and use internet explorer instead (ugh!)

after i downloaded firefox 4.o.1 i have no longer been able to use my VPN which i need frequently for work. it worked fine with the previous version of firefox.

Can you describe in a little more detail which part isn't working? For example, is the VPN not starting up when you start Firefox, or is Firefox not able to use the VPN tunnel?
If we can't solve it, here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
You could install Firefox 3.6 over Firefox 4 (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. InnerException: Requested registry access is not allowed.

I have read some of the other posts for people that got this error, but none seem to apply to me.
My program has been working for weeks. I made some minor changes, and started getting the error (full details below).
I did a TFS "undo pending changes" and still getting the same error, even after logging off. The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
I'm an Admin own my own box (running WIn XP SP3). I even tried "Run as Admin" on Visual Studio.
I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
We have two other developers, one has the same problem, one does not. In theory, we have all done "get latest" and are running the same code.
The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
When I do "Start Run" in Visual Studio, I get this error:
{"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
and it has InnerException: {"Requested registry access is not allowed. "}
Outmost StackTrace:
 at System.Data.SqlClient.SqlConnection..ctor()
 at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
 at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
 at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
 at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
 at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
 at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
 at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
 at System.Diagnostics.TraceSource.TraceInformation(String message)
 at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
 at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
 at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
 at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
Second Inner StackTrace:
 at System.Data.SqlClient.SqlConnection..cctor()
Third Inner StackTrace:
 at System.Data.SqlClient.SqlConnectionFactory..cctor()
When I do "Run as Admin", I get this error:
{"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
Server stack trace:
 at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
 at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
 at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
 at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
 at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
 at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
 at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
 at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
 at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
 at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
 at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
 at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
 at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
 at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
 at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
 at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
 at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
 at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
 at System.Threading.ThreadHelper.ThreadStart()
I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing.
Client app.config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<connectionStrings>
</connectionStrings>
<system.serviceModel>
 <behaviors>
 <serviceBehaviors>
 <behavior name="ServiceBehavior">
 <serviceMetadata httpGetEnabled="true"/>
 <serviceDebug includeExceptionDetailInFaults="false"/>
 <serviceAuthorization impersonateCallerForAllOperations="true"/>
 </behavior>
 </serviceBehaviors>
 <endpointBehaviors>
 <behavior name="FRB.AllowImpersonate">
 <clientCredentials>
 <windows allowedImpersonationLevel="Impersonation"/>
 </clientCredentials>
 </behavior>
 </endpointBehaviors>
 </behaviors>
 <bindings>
 <wsHttpBinding>
 <binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
 openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
 bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
 maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
 messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
 allowCookies="false">
 <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
 maxBytesPerRead="4096" maxNameTableCharCount="16384" />
 <reliableSession ordered="true" inactivityTimeout="00:10:00"
 enabled="false" />
 <security mode="Message">
 <transport clientCredentialType="Windows" proxyCredentialType="None"
 realm="" />
 <message clientCredentialType="Windows" negotiateServiceCredential="true"
 algorithmSuite="Default" />
 </security>
 </binding>
 </wsHttpBinding>
 </bindings>
 <client>
 <endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
 bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
 name="WSHttpBinding_IAdminService">
 <identity>
 <dns value="localhost" />
 </identity>
 </endpoint>
 </client>
 </system.serviceModel>
</configuration>
web.config of WCF service:
<?xml version="1.0"?>
<configuration>
 <configSections>
 <section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
</configSections>
 <appSettings>
 
 </appSettings>
 
<connectionStrings>
 <add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
 <add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
 <add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string="Data Source=myserver;Initial
Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient"/>
</connectionStrings>
 
 <FRB.Diagnostics>
 <sqlTraceListeners>
 <sqlTraceListener name="sqlTraceListenerSettings"
 connectionStringName="log"
 commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
 commandType="Text">
 <parameters>
 <parameter name="@Source" propertyToken="{Source}"/>
 <parameter name="@ActivityId" propertyToken="{ActivityId}"/>
 <parameter name="@ProcessId" propertyToken="{ProcessId}"/>
 <parameter name="@ThreadId" propertyToken="{ThreadId}"/>
 <parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
 <parameter name="@Message" propertyToken="{Message}"/>
 <parameter name="@Timestamp" propertyToken="{DateTime}"/>
 
 </parameters>
 </sqlTraceListener>
 </sqlTraceListeners>
 <smtpTraceListeners>
 <smtpTraceListener name="smtpTraceListenerSettings"
 host="vssmtp"
 port="25"
 from="[email protected]"
 to="[email protected]"
 subject="AdminService Logging Event: {EventType}, {MachineName}"
 body="{Message}
=======
Process={ProcessId},
Thread={ThreadId},
ActivityId={ActivityId}"/>
 </smtpTraceListeners>
 </FRB.Diagnostics>
 
 <system.diagnostics>
 <sources>
 <source name="FRB.EC.AdminService" switchValue="All">
 <listeners>
 <clear/>
 <add name="ods"/>
 <add name="smtp"/>
 <add name="sql"/>
 </listeners>
 </source>
 <source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
 <listeners>
 <add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
 </listeners>
 </source>
 </sources>
 <sharedListeners>
 
 <add name="ods"
 type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
 initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
 
 <add name="sql"
 type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
 initializeData="sqlTraceListenerSettings"
 traceOutputOptions="Timestamp"/>
 
 <add name="smtp"
 type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
 initializeData="smtpTraceListenerSettings">
 <filter type="System.Diagnostics.EventTypeFilter"
 initializeData="Error"/>
 </add>
 </sharedListeners>
 <trace autoflush="true"/>
 </system.diagnostics>
 <system.web>
 <compilation debug="true" targetFramework="4.0">
 </compilation>
 <roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
 </system.web>
 <system.serviceModel>
 <services>
 <service name="FRB.EC.AdminService.AdminService"
 behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
 
 <endpoint address="" binding="wsHttpBinding"
 bindingConfiguration="wsHttpEndpointBinding"
 contract="FRB.EC.AdminService.IAdminService">
 
 <identity>
 <dns value="localhost"/>
 </identity>
 </endpoint>
 <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
 </service>
 </services>
 <bindings>
 <wsHttpBinding>
 <binding name="wsHttpEndpointBinding"
 maxBufferPoolSize="2147483647"
 maxReceivedMessageSize="500000000">
 <readerQuotas maxDepth="2147483647"
 maxStringContentLength="2147483647"
 maxArrayLength="2147483647"
 maxBytesPerRead="2147483647"
 maxNameTableCharCount="2147483647"/>
 <security>
 <message clientCredentialType="Windows"/>
 </security>
 </binding>
 </wsHttpBinding>
 </bindings>
 <behaviors>
 <serviceBehaviors>
 <behavior name="FRB.EC.AdminService.AdminServiceBehavior">
 
 <serviceMetadata httpGetEnabled="true"/>
 
 <serviceDebug includeExceptionDetailInFaults="true"/>
 <serviceCredentials>
 </serviceCredentials>
 
 <serviceAuthorization principalPermissionMode="UseWindowsGroups"
 impersonateCallerForAllOperations="true"/>
 </behavior>
 <behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
 
 <serviceMetadata httpGetEnabled="true"/>
 
 <serviceDebug includeExceptionDetailInFaults="false"/>
 <serviceCredentials>
 <clientCertificate>
 <authentication certificateValidationMode="PeerTrust"/>
 
 </clientCertificate>
 <serviceCertificate findValue="WCfServer"
 storeLocation="LocalMachine"
 storeName="My" x509FindType="FindBySubjectName"/>
 </serviceCredentials>
 </behavior>
 </serviceBehaviors>
 </behaviors>
 <serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
 </system.serviceModel>
 <system.webServer>
 <modules runAllManagedModulesForAllRequests="true"/>
 </system.webServer>
</configuration>
Thanks for any help.
Neal

I think I found it... this is sure a strange error for what is really happening.
Apparently it had happened to me before, and fortuantely, I actually added the following comment:
 // Above is related to the WCFLOG SQL Diagnostics Trace
 // If you get error here an inner exception "requested registry access is not allowed"
 // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
 // then make sure you have impersonation enabled in your client.
 // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
Now I think I will do a try catch and spit out the same text.
Still testing to assure that this really was the issue.
 <endpointBehaviors>
 <behavior name="FRB.AllowImpersonate ">
 <clientCredentials>
 <windows allowedImpersonationLevel="Impersonation"/>
 </clientCredentials>
 </behavior>
 </endpointBehaviors>
The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
 <client>
 <endpoint address="http://localhost:4998/AdminService.svc"
 behaviorConfiguration="FRB.AllowImpersonate"
 binding="wsHttpBinding"
 bindingConfiguration="WSHttpBinding_IAdminService"
 contract="svcRef.IAdminService"
 name="WSHttpBinding_IAdminService">
 <identity>
 <dns value="localhost" />
 </identity>
 </endpoint>
 </client>
Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
 public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
 try
 _connection = new SqlConnection(connectionString);
 // Above is related to the WCFLOG SQL Diagnostics Trace
 // If you get error here an inner exception "requested registry access is not allowed"
 // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
 // then make sure you have impersonation enabled in your client.
 // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
 catch (Exception ex)
 if (ex.ToString().Contains("The type initializer for"))
 throw new System.ApplicationException(@"
 Your client app <endpoint> must be cofigured have a
 'behaviorConfiguration' attribute like this:
 behaviorConfiguration='FRB.AllowImpersonate'
 that points back to a behavior that has this syntax:
 <behavior name='FRB.AllowImpersonate'>
 <clientCredentials>
 <windows allowedImpersonationLevel='Impersonation'/>
 </clientCredentials>
 </behavior>
 ", ex);
 else
 throw ex;
 _command = _connection.CreateCommand();
 _command.CommandText = commandText;
 _command.CommandType = commandType;
 // TODO _command.CommandTimeout = ;
Neal

When I updated the software on my ipod 4 touch, many podcasts were erased. When I synced the ipod, they were erased from the ipod also. The current itunes does not allow me to go back to these dates (a few months) and re-download? Can I? and prevent this?

When I upgraded the software on my ipod touch4, many podcasts were deleted from itunes. Of course, when I synced the ipod, they were deleted from the ipod as well. Apparently the current version of itunes will not let me go back to these earlier episodes (just a few months), in a podcast that I have been subscribed to, and re-download them. Is there a way to do that? and, how can I prevent this from happening again?

Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!

When i try to open firefox i get a message that says Windows has encountered a problem and will notify when there is a solution. Then you can click on the explanation and it says DEP will not allow it to open. Can you tell me how to fix this?

I was able to install and have an icon on my desktop. When i click on it it automatically pops a box up that says: Firefox has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Then it highlights an icon at the bottom to show what the problem is and it is DEP (data execution prevention. I tried a few suggestions there but it didn't work. So it said to see if there is a download version compatable with DEP

See:
* https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it

I use firefox 8 (no update wanted ) and recently my session restore quit functioning properly- it does not restore, and i get " url not valid - session not rest

ored" - but it seems to do ok if i use file/exit......help, please !

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT201359 Hi,am trying to open an Apple ID ,but am finding it difficult as it's my first time using an Apple iPad as it says I should verify but if I do it does not work ,so please if u can help me out please .... Thank you.

Hi am trying to open an Apple ID but it ask me to verify which is not working for me as am new to apple product please so if you can help me out please

Apple ID security issues -
Call Apple Care for your country and ask for the Account Security Team. They can assist you with your issue.
http://support.apple.com/kb/HT5699

ITunes does not allow me to download at Store "You do not have authority to write in iTunes Media files. Adapt your authorisation in explorer and check for available downloads in Store

As administrator of my pc icannot download musc/video from Store: the message (translated from Dutch) "You do not have authority to write in iTunes Media files. Adjust your authorisation in explorer and check for available downloads in Store

Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!

After installing Firefox 6, when I click on an e-mail (thunderbird) link, Firefox stays on the backround and does not open in front. How can I make firefox come to the front automatically when a link is clicked?

If I receive an e-mail on thurnderbird with a link to a URL, if I click it firefox will open in the background, but it won't automatically com to the front, but will stay in the back. I have to click on the thurnderbird icon to make the firefox screen come up.

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

Similar Messages

Maybe you are looking for