Use formscentral basic service for 2 months
I know FormsCentral is being shutdown. However, I have a form that I would like to have the Basic Service enabled on for the next 2 months. How can I enable the billing on my account to activate this service for a very short term form? I have looked several places, but cannot find the "UPGRADE" area anywhere.
I was a paid user in the past. the form is for a scholarship application
for the local Rotary club. They used the service at this time last year
and would like to use it again while they can plan an alternative for
next year. The application period ends April 6, 2015 so it is slightly
over 2 months, but well within the expiration time frame.
Tami Burke
Honey House Web Designs, LLC
803-221-1760
HoneyHouseDesigns.com <http://HoneyHouseDesigns.com>
Similar Messages
-
I have an ipad2 with 3G Verizon for use in India can I get Vodafone service for a month
I have I pad 2 with WIFI and 3G Verizon . For use in India can I get Vodafone service for a month.
The Verizon iPads are CDMA based, they don't use micro-sim cards unlike the AT&T models - they are different 3G technologies. I don't know whether there are any CDMA-based carriers in India, if not then you could try getting a mifi device and use a sim card in that to give you internet access on the iPad
-
Re: How to keep phone number on prepaid plan if you drop service for 1-2 months and then resume?
Thanks for the replies !
I pasted in the link to the discussion I started earlier. Dont see a way to respond to replies. If there is a way to do this, would love to know pls!
I may want to drop the monthly service for 2 months or more. So the offer to reserve a number for $100 is actually more appealing than paying 49 monthly for more than 2 months. I just cant find a way to pay it that doesnt get lost in monthly payments
I have tried the cust service number for pre paid. It's menu driven, no option at all to speak with anyone, and no option that matches my question. It's nothing more than a set of text that is accessed by the telephone. One way communication, no chance to get any help :-( Disappointing. And Chat is still busy :-(
Thanks for reading and any tips!If you don't get the option to reply then refresh and log back in, your login most likely timed out.
As for calling in I just called
Phone Number
888-294-6830
I waited 2 mins 36 seconds with no menus and got a human. -
Can we use same Business Service for Sender and Receiver
Can we use same Business Service for Sender and Receiver
Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore -
Been using g iPhone 6 for few months, just backed up my iPhone 5, restored my pics etc onto 6 but all original photos have been deleted, Is there a way I can get them back?
If you are backing up to your computer, check in iTunes/Edit/Preferences/Devices, if there is more than your recent iPhone 6 backup listed. If yes, transfer the photos from your phone to the computer first, then restore from the backup. After that, transfer the recovered photos again to your computer and sync all of the transferred pictures to your phone, using iTunes and the settings in the photo pane.
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
I didn't used my iPad 2 for many months. Last week when I tried to use it, it wasn't charged. Then I put it on charging and again didn't used it for a week. Yesterday, When I tried to use it again it's saying that it is disabled for 22 million mins. I treid to restore it by connecting to iTunes but it's not restoring. Kindly Help.
Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks -
my daughter has not used her ipod touch for 16 months and has forgotten her passcode. restore factory settings keeps failing due to a software update failure!
how can i get this ipod reset. She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my accountThat has nothing to do with an update server. Do the following:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes -
Using Lightroom publish service for either Flickr or SmugMug. I have many images with a keyword Maddy. This frequently doesn't show up in SmugMug or Flickr. All my other keywords seem to work fine. Anybody experience anything like this?
You only get one opportunity to set up the hard drive under publish and the folder cannot be changed unless you get a plug-in to provide a work around.
However you could just create a generic publish folder - something like Photo Lab, or Print Job.
But you could then right click on your publish folder and select “make target collection” - you will see the plus sign added.
Simply highlight the photos you want to print and press B (the same as adding to a quick collection) and your Publish Services folder on your hard drive will be populated with the exports.
The real problem is that you would need to edit the publish settings every time you required different dimensions etc (not sure possible). I use a similar system, which works well and I like how I can see what has already been published and what is still to be published but my prints are always the same size and resolution.
-
I bought my iphone from Egypt and i want to use it in germany for 5 months
Dear Mr. or Mrs.,
Now I have bought my iPhone4 from Egypt and it is locked for Vodafone Egypt , but I am travelling to Germany and I will be staying there for 5 months as I am doing my Bsc. at Aalen uni. , so how can i solve that problem as i want to use my iPhone in Germany for that five months using a SIM card from a German Company like vodafone Germany. Pleas help me as it is very nessecary for me to take my iPhone with me. and thank you very muchYou have only a single option - ask Vodofone to unlock it. If they won't or simply don't do that under any circumstances, then there is nothing to be done about it. You can still use it in Germany, but you'll pay roaming fees. Unless, of course, Vodofone offers some kind of package or deal for long term travelers - worth asking them about it.
An alternative would be to see if you could rent/lease a phone for the 5 months in Germany. I've never done it, but there are companies that rent phones for such periods for travelers.
Message was edited by: Michael Black -
Regarding the use of different services for different parts in the same display layout
hi,
i am trying to design an application using flex at the frontend and in the gui what i have designed i have the upper portion consisting of four panels
displaying the critical events at real time whereas in the lower half of the gui design i have designed something that based on the user provided input the
the information should be displayed in the lower half of the gui design layout.i just wanted to know whether it is possible to use two services like request response http based service for the lower half and real time data pushing using either amf or amfx or http with polling in the upper half.but i want them to be displayed on the same gui.
thanksHi,
Please refer the below link:-
http://www.sap-img.com/sap-sd/sap-sd-cin-configuration.htm
Thanks & Regards,
Rahul Verulkar -
After not using my iPad 3G for a month, I tried to charge it with no success
After not using my iPad 3G for over a month, I turned it on and saw that the battery icon showed a red band and that it needed to be recharged. I plugged in the 10w charger and the battery icon has not shown any progress after 3 hours on the charger. Is it my battery or do I need to be more patient?
The battery symbol will change when it is connected properly. It will not show the percentage, but a sideways lightening bolt indicating charging.
I tried to charge my new iPad using my PC, because this worked OK for my iPhone, but I now realize PCs do not have adequate wattage to charge the iPad.
Are you certain this is the original charger?
Many wall chargers do not have the wattage intended for the iPad, only for the iPhone. -
Using common shared services for Planning & HFM
Hi All,
I've already installed Planning and shared services in one server. Now i would like to install HFM on other server, but would like to use the shared services on the first server. In this case, during the installation on the second server, do i need to uncheck the Foundation services ? What other products that i've to uncheck. How about Reporting & Analysis Framework ? Pls. advice
Thanks,
PVRYou will need to only carry out the following step in regards to foundation on the HFM server
"When you configure in a distributed environment, you must configure the Shared Services database on every machine. On the first machine, you are setting up the Shared Services Registry. For configurations on subsequent machines, choose “Connect to a previously configured Shared Services database.” In this case, you are letting the machine know the location of the Shared Services Registry."
Then configure the HFM components.
Cheers
John
http://john-goodwin.blogspot.com/ -
Using a Publish Service for print service prep
I'm just starting to work out a new way to prepare images for sending to a (consumer grade!) print service using a Publish service, and realized I should harness the power of this corner of the Lightroom community to see if my ideas are sound. Feel free to add comments or suggestions.
Here's what I'm doing:
- For each size and processing option (e.g., 5x7, Matte) create a hard drive Publish Service.
Set options appropriately, such as:
- Filename for clarity. I use custom name + orig file number. (There appears to be a small display bug, in that the example displayed will show the " dng.jpg")
- Given what I've learned about Lr and JPEG compression, I reduce the quality to 80% or so for a nice quality/size balance. I don't want to have to muck with this too much.
- My service does not have an ICC profile for me to use, but assure me that AdobeRGB is accepted by their equipment. So that's what I'll use. (One day I'll try out a pro service that understands that a simple thing like an ICC profile makes us feel warm and fuzzy.)
- Resizing to fit. I set to never enlarge (though it should never happen that I have to enlarge) and set the dimensions to whatever I need for this service: 5x7, 4x6 &etc. Hints on optimal dimensions for getting nice borderless prints of a certain size accepted! I know that not all dimensions are created equal.
- I'll assume that the default resolution is fine, but I ought to do my research for when to modify this when I get into 8x10 or larger formats.
- Sharpening for print and paper type for this publish service.
- My service has no reasonable file size limitations, so I just let the exported files get created at any size.
- I minimize keywords. Makes much smaller files because who needs keywords in prints? I have Metadata Wrangler, so I might insert that and have it leave in the minimal set of MD, like ICC profile and copyright info.
So, given this, I can process my images as usual, make a number of crops (just to be a perfectionist) and then drag them to appropriate service where they end up in a hierarchy of folders ready for uploading.
What am I missing?
BTW, I'm not using the Print module because it was too tweaky trying to get it to make JPEGs that would print borderless. Feel free to set me straight on that if you like.You only get one opportunity to set up the hard drive under publish and the folder cannot be changed unless you get a plug-in to provide a work around.
However you could just create a generic publish folder - something like Photo Lab, or Print Job.
But you could then right click on your publish folder and select “make target collection” - you will see the plus sign added.
Simply highlight the photos you want to print and press B (the same as adding to a quick collection) and your Publish Services folder on your hard drive will be populated with the exports.
The real problem is that you would need to edit the publish settings every time you required different dimensions etc (not sure possible). I use a similar system, which works well and I like how I can see what has already been published and what is still to be published but my prints are always the same size and resolution.
-
I have just helped set up an iPad for my elderly cousin who is in her mid 80s. She cannot cope with multipile log in and passwords, so to help her out in case she loses her information, I have given my e-mail address for use as 'rescue' in case her information goes astray. I have just had an e-mail in from you a couple of days ago asking me to verify if I had set up the 'rescue' services for myself etc. The answer is no, but I would like to be able to use my address for my cousin's information - how can I make this work please?
For info we are fellow users here on theseforums, you're not talking to iTunes Support nor Apple.
The email should have a 'verify now' link in it e.g.
If you click on that 'verify' link you should be taken to a browser and be prompted to sign into your cousin's account, abd doing that will verify the address as the rescue email address on your cousin's account. As it's only a rescue email address you don't have to use the verify link and verify it, it should still work as a rescue email address on her account (though you should probably verify it). -
I am unable to set up my iCloud on my Mac mini although i have been
paying iyoug for service for the last six months."Iyogi" is a scam. What happens when you try to set up iCloud?
Maybe you are looking for
-
ORA-01460 error only in production enviorment in ADF 11g application
Hi , We are using ADF 11g rel 1 11.1.1.4.0 And database is Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production PL/SQL Release 11.2.0.1.0 - Production "CORE 11.2.0.1.0 Production" TNS for Linux: Version 11.2.0.1.0 - Production
-
Hei. I have an iPad 1. Two days ago i bought a movie via iTunes. Have done this before and everything has gone well. This time it starts download ,it hets aproxx half of the download. And then it drops and starts over. Reach to the same point,and st
-
Reg Dr and cr entery..
Hi Friends, i want to know the concept of debit entry and credit entry in outgoing payment. ex: in outgoing payment the customer get the remaining amt from the vendor, here 2 options r there 1 is credit and another one is debit.please expl
-
How to remove a dialogue with the placement of the signature in Acrobat XI
Hello I have a problem. After upgrading to Acrobat Standard XI during the signing dialog still shows: "To start the certification process, select the Create a new rectangle for signature and then drag to select the area where you want the certifying
-
How to use solaris font in the java
Hi all! I need to use the installed solaris fonts in a swing application. Do you know how to make the installed solaris fonts available in the java runtime environment? I have Solaris 8. Thanks eha