Use KM and TRex with Webbdynpro ABAP

Hello gurus,
I need to use WebDynpro ABAP with KM and Trex. Anyone have a statement or case-study?
Thanks Regards

I tried it. It is technically possible but I'm not sure it is the best approach except that you run in Abap stack and you can use ALV...
So it possible to create a WDA that call portal web service. See that blog:
Getting started with the KM Web Service API
There is service for repository and for index management.
You can test this service with WS Navigator.
To use it in WDA, you have to:
- create an Abap proxy (generate classes to call method/web service);
- create a logical port (that generate a RFC destination -> depend on system and allow to select connection type. See SOAMANAGER transaction);
- integrate web service call in WDA -> right clic on component and choosse create service call.
Best regards.

Similar Messages

Why do we use inbound and outbound plugs in abap webdynpro?

hi all,
why do we use inbound and outbound plugs in abap webdynpro?
Thanks

Actually we have 2 types of plugs
1.View plugs
2.Window plugs/Interface Plugs
plugs are for navigating one view to the other and also you can pass the parameters along with the plugs.
Outbound plug is to navigate from one view to other view,also we can pass parameters along with the plug.
Inbound plug is like event handler/receiver of the outbound plug.
Using window plugs we can call other Web Dynpro applications.for more information check this link.
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/45/19bf8c16f25d7ae10000000a11466f/frameset.htm
Thanks
Suman

How do I use Qt and OpenGL with Visual Studio

Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
Embedded firmware design(C and Assembly).
The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
Thanks
Alexandros

Hi ClassicalGuitar,
The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Using ConnBean and CursorBean with a Data Source

Hi all,
I',m making a web app. using the Jdev (RUP4) with OA Extension. I looked in the help menu under "About Data-Access JavaBeans and Tags". Here I found the following example, but for some stange reason I cannot get the setProperty to work.
Example: Using ConnBean and CursorBean with a Data Source This following is a sample JSP page that uses ConnBean with a data source to open a connection, then uses CursorBean to execute a query.
<%@ page import="java.sql.*, oracle.jsp.dbutil.*" %>
<jsp:useBean id="cbean" class="oracle.jsp.dbutil.ConnBean" scope="session">
<jsp:setProperty name="cbean" property="dataSource"
value="<%=request.getParameter("datasource")%>"/>
</jsp:useBean>
<% try {
cbean.connect();
String sql="SELECT ename, sal FROM scott.emp ORDER BY ename";
CursorBean cb = cbean.getCursorBean (CursorBean.PREP_STMT, sql);
out.println(cb.getResultAsHTMLTable());
cb.close();
cbean.close();
} catch (SQLException e) {
out.println("<P>" + "There was an error doing the query:");
out.println("<PRE>" + e + "</PRE>\n<P>"); }
%>
Does anyone know how to set the "Property" to a datasource and make it work?
Best regards,
MHCI

There is no point-and-click (Import Data Source Metadata) way to use an LDAP server as a datasource. You have to use the Java Function provided on dev2dev. If you need help with it, please post here.
- Mike

Configure CRS2008 to using AD and Kerberos with Java application servers.

Hi All,
I have configure CRS2008 to using AD and Kerberos with Java application servers. Domain Controller is installed on W2K3 Server. In addition, CRS2008 is installed on another W2k3 Server.
I have create service account in domain controller: CMSACC
I have create two user account: CRuser1 and CRuser2
I have create domain group: CRSGroup
After I had run the setspn in domain controller,I got the message at below:
Registered ServicePrincipalNames for CN=CMSACC, OU=TEST, DC=BD, DC=com:
    BOBJCentralMS/BDMGTSRV.BD.com
CMC Setting:
AD Administration Name: BD\administrator
Default AD Domain: BD.com
Add AD Group(Domain\Group): secWinAD:CN=CRSGroup,OU=TEST,D=BD,DC=com
Service principal name:BOBJCentralMS/CMSACCatBD.com
I have create a WINNT folder in root directory.Moreover and save bcsLognin.conf and Krb5.ini at here.
bscLogin.conf:
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
krb5.ini:
[libdefaults]
default_realm = BD.com
dns_lookup_kdc = true
dns_lookup_realm = true
[realms]
forwardable = true
BD.com = {
default_domain = BD.com
kdc = BDMGTSRV.BD.com
I have tested the Kerberos,using kinit CMSACCatBD.com password, and got error message at below:
Exception: krb_error 41 Message stream modified (41) Message stream modified
KrbException: Message stream modified (41)
        at sun.security.krb5.KrbKdcRep.check(KrbKdcRep.java:53)
        at sun.security.krb5.KrbAsRep.<init>(KrbAsRep.java:96)
        at sun.security.krb5.KrbAsRep.getReply(KrbAsRep.java:486)
     at sun.security.krb5.KrbAsRep.getReply(KrbAsRep.java:444)
     at sun.security.krb5.internal.tools.Kinit.sendASRequest(Kinit.java:310)
     at sun.security.krb5.internal.tools.Kinit.<init>(Kinit.java:259)
     at sun.security.krb5.internal.tools.Kinit.main(Kinit.java:106)
My problem is failed to logon CMC and infoview and got error message at below:
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserNameatDNS_DomainName, and then try again.
Actually, I am sucessful to logon Business View manager with CRuser1. However, I fail to logon CMC and infoview and got the above error. Have you any suggestion to solve this problem?
Ken.

if you can logon with client tools then that should be an indication that the service account running the CMS IS working! Good news.
So the problem is likely with the java portion (krb5/bsclogin or java options)
If the files are in c:\winnt\ (if not copy them there) and perform c:\program files\business objects\javasdk\bin\kinit username
then enter and password/enter again
Probably get the same message. To note in your krb5.ini all domain info must be in CAPS (the .com appears to be in lower case)
kinit works with just the krb5.ini, java SDK and AD (removing BO config and the service account from the picture). Once that works if your java options are specified properly you should be able to login to CMC/infoview.
also 1 last point. Add udp_preference_limit = 1 to the krb5 lib defaults section
libdefaults
default_realm = BD.com
dns_lookup_kdc = true
dns_lookup_realm = true
udp_preference_limit = 1
Regards,
Tim

How to use audio and mic with multipoint server with out it crashing on you

how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
them to work at the same time and if posible can i use a non USB device

Look for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
Claude

How to use "start" and "duration" with HLS stream

Hi all,
is it possible to use "start" and "stop" with HLS stream like rtmp stream?
If yes, how?
thanks in advance.

Hi,
This is completely player side fucntionality you are asking for. However, I guess default player that comes on safari (iPad), quicktime has the player timeline with stop and start option. But if not, you can create your custom player using exposed api of AVPlayer. Check-out AVPlayer api's.
FMS, by nature of protocol will respect the request to get the data(in case of client-play-start) and will not automatically push the data to the client if not asked for by the client (as in case of client-play-stop).
Thanks

I use to use ichat and now with mountain lion i only have facetime. i try to keep in touch with my family thru the old ichat, will facetime work as easiely ? is it easy to connect with this app? thanks, gilbert

I use to use ichat and now with Mountain Lion I only have FaceTime, will this work as easy as ichat? I try to keep in touch with my son and his family, he has a Mac also. I have never tried to do a video chat with my new Mountain Lion. I have set-up FaceTime and thought I would throw the question out before we try and get together. Thanks, Gilbert

Ichat is now called Messages and is in your Applications folder.

Using iPhoto and editing with Photoshop Elements 4

Hello
I am new to Macs after many years using PC and I am struggling to set up my photo workflow. I shoot in RAW format and input into iPhoto from iPhoto I double click on the photo and which opens the RAW editor in Photoshop Elements. After making changes I open the file in Photoshop and then save as a TIFF.
My problem is I do not see the changed and saved file in iPhoto and if I double click on the photo again it opens back up in the RAW editor not as a TIFF.
Can any one point me in the right direction to solve this or is what I am trying to do not possible
Thanks
Grant

Grant
Welcome to the Apple Discussions.
What you're trying to do is not possible.
When you save as a TIFF you create a whole new file that needs to be imported into iPhoto anew. iPhoto will track an edit as long as you stay with the same file - so, edit your jpeg in PSE and use the 'Save' command and the change is reflected in iPhoto. However, you cannot Save RAW files, it's always a Save As... and so the resulting file has to be imported.
Regards
TD

How can I use undo and redo with run time menu?

Hi..I try to built my own menu for graphic programming. How can I use undo and redo in labview with run time menu?

filozof-
During runtime, by default, LabVIEW has undo/redo data changes under the edit menu. This will undo/redo changes made to controls during runtime. If you want a more extensive undo/redo (custom for your application), you are going to have to do quite a few things
1) Create a custom runtime menu (Edit>>RunTime Menu) and place your own undo/redo controls on it
2) Keep an action history in your program
3) Catch the Shortcut menu event for your custom undo/redo controls
4) Reverse the last action in your histroy when you catch the event
This method would allow you undo entire operations (like resize, move, or whatever kind of functionality you are building into your application) unstead of just undoing data changes.
Xaq

Using MySql and PHP with Dreamweaver on a Mac

Hello all,
As always if the answers to these questions are obscenely
obvious please humour me.
I use XHTML and CSS in my websites and realise that it is
time that I dabbled with SSI. So I've started using PHP.
However, I have been following the installation directions of
MySql and am running into problems. I am installing the relavent
software and am then unable to find it on my Mac, the startup files
are there but the actual MySql data appears to not be installed
despite my computer telling me it is...... I am using a G3 running
OSX 10.4 is this good enough? I noticed talk of needing a PowerPC
or Intel mac. Is this the case?
Also, would I need MySql installed on my actual computer if
the my servers have it already? And does Dreamweaver 8 have both of
these programs installed as standard?
If you could help out I would be very appreciative as I would
like to learn this stuff and I appear to be struggling at the
outset....
Cheers
M.A

M.A.Wilson wrote:
> However, I have been following the installation
directions of MySql and am
> running into problems. I am installing the relavent
software and am then unable
> to find it on my Mac, the startup files are there but
the actual MySql data
> appears to not be installed despite my computer telling
me it is...... I am
> using a G3 running OSX 10.4 is this good enough? I
noticed talk of needing a
> PowerPC or Intel mac. Is this the case?
MySQL is a relational database management system that
comprises a
database server and several utility programs. Although you
install it
like any other program on a Mac, the similarity stops there.
First, the point about PowerPC and Intel Macs is that there
are
different versions of the MySQL installer for each type of
processor.
I'm pretty sure that a G3 is OK, but you must choose the
PowerPC version
of MySQL, not the 64-bit or x86 (Intel Mac) version.
Once you have installed MySQL, you need to drag the
MySQL.PrefPane icon
from the disk image onto your System Preferences. This
installs a
Preference Pane that enables you to start and stop MySQL. The
Preference
Pane has an option to start up MySQL automatically, but in my
experience, it doesn't work on Tiger. You need to open the
Preference
Pane, and click Start MySQL Server each time you start your
computer.
The best way to work with MySQL is to use a graphical
interface, such as
phpMyAdmin. As Osgood has mentioned, I have written a book
about PHP and
Dreamweaver, which goes into all the necessary details. It's
also very
Mac-friendly with separate instructions where necessary for
PC and Mac.
More details here:
http://foundationphp.com/dreamweaver8/
David Powers
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "Foundation PHP 5 for Flash" (friends of ED)
http://foundationphp.com/

Installation sequence using PS7 and PS7 with SRA

Our implementation architecture has three network zones i.e., Internet zone, SSN and data zone. We have two solaris machines. Each machine has one global and three local zones. Every machine zone has a iDM product installation. We did installation in following sequence
1. DS on M1Z1
2. AM on M1Z2
3. IM on M1Z3
Everything works here as expected.
We have received PS7 and PS7 with SRA support bits from Sun.
Can you please let us know which bits to use to complete following installation
4. PS on M2Z1
5. SRAG on M2Z2
6. rewrite on M2Z3
Do you have any documentation on installation of SRAG and rewrite on different machine and these machines does not have portal server installation.

Portal server also requires DS and AM. So, I assume that you are going to point to the instances on M1 when you install portal.
You also will need to install DS on the SRA machine. This directory is only needed during installation. Once things are up and running, then you can disable it.
Start by installing Portal and make sure you install the SRA Core package. You must select this when you install portal the first time because the installer will not let you add it later. This is a known bug.
Then, install the SRA Gateway component following these directions:
http://docs.sun.com/app/docs/doc/819-3027/6n59bv1ne#hic
These instructions are not entirely correct. Specifically, install everything in "Configure Now" mode.
I don't know about installing Rewriter Proxy on a separate machine. I have not done this yet. Although it is a supported configuration.
HTH,
Jim

Runtime.exec() - using cp and files with spaces on unix

I'm using the Runtime.exec method to copy files in a unix environment. This works fine until there is a file where the name has spaces in it. I've read the article on the pitfalls of using runtime and how it breaks a string on white spaces and this is what is happening. I've also found another topic that was having the same problem, but they were using /usr/bin/dos2unix. I've tried putting quotes around the filename, but it still breaks on the first space. Any suggestions on how to get around this or another way of doing this would be greatly appreciated.
An example of the os command string is:
/usr/bin/cp /tmp/file with space.doc /docs
Thanks!

Hi!
Well I dont have any Sun machine right here to try this but in windows It works great.
Have you tried something like this ?
import java.io.*;
public class OSCopy {
    public static void main(String[] args) {
        try {
            String space = " ";
            String copycmd = "E:\\cp.cmd";
            String source = "E:\\File with space.txt";
            String destination = "E:\\tmp";
            String cmd = copycmd + space + "\"" + source + "\"" + space + destination;
            System.out.println("cmd: " + cmd);
            Runtime runtime = Runtime.getRuntime();
            Process copy = runtime.exec( cmd );
            BufferedReader reader = new BufferedReader( new InputStreamReader( copy.getInputStream()) );
            String line = null;
            while( (line = reader.readLine()) != null ) {
                System.out.println( line );
        catch (Exception e) {
            e.printStackTrace();
cp.cmd is a simple dos copy command
copy %1 %2
*/good luck!

Delay when using doubletap and hold with bootcamp 5

Hi,
I just bought a 15" MBPro and discoverd a delay when I use doubletap and hold to scroll or to mark text or drag. Is this a know problem of the bootcamp trackpad driver?
Hoping for answers
Bye
Michael

I have the same problem, except that I'm using the Apple Trackpad in Windows 8 in Boot Camp on a 2012 iMac, so my guess is that the driver is to blame.

HT4759 Can I use Itunes and ICloud with my Kindle Fire?

Does anyone know if I can use ICloud and Itunes on my Kindle Fire and if so, could you please tell me what to do.
Thank You!

No.

Use KM and TRex with Webbdynpro ABAP

Similar Messages

Maybe you are looking for