Use language from BP as default for texts in activitys

Hello,
we are searching for a solution to use the language from a businesspartner as default language for texts in activitys.
at the moment the system will allways use the sign-on language from the user as default.
is there any possibility about the access sequences in the text procedures to control which language will be used as default in the activitys?
or any other ideas how we can manage this?
thanks a lot and
kind regards - Helmut

Hi Matthew
What I'm doing is: setting the RAW fine tuning camera default ( to my custom settings) , so all new files being imported into Aperture 3 will take my custom settings as they are imported into Aperture 3.
I did this will Aperture 2 without any trouble . now I have upgraded to Aperture 3 the RAW fine tuning camera default is Apples and I have to change it from Apples to my custom preset.
It shows I have changed the RAW camera default to my custom settings in the drop down list but when I import files - they take the Apple preset not my custom settings ? ?
Martin

Similar Messages

Can I use CSS, htmlTags and Alt tip for text with TLF?

I want to know if it applicaple to use CSS style sheet to format TLF Text?
is it Applicaple to use html tags instead of text with TLF?
is it applicaple to add alt (tooltip when I over some words) with TLF?

Thank you Robin for helpull answer, yes that what I meant by html, I will check the TextConverter Class.
I asked about CSS because my Manager want to control the Format of the text inside Flash using The CSS.
is there a way to format the TLF Markup, or what is the best suggestion instead of CSS?
I didn't try before to add any new capapilities to the architecture, if I want to start adding this what is the place to start from or any done example that demonstrate it.
I am using Flash CS4 not Flash Builder nor Flex.
thank you again for your helpful answer.

Setting defaults for text tool in CC Acrobat Pro

I am running the latest version of XI Acrobat Pro for Mac .
I can set defaults for everything except the text typing tool.
Can anyone help?
Thanks very much!

I am trying to select it, but the moment I let go of the left mouse button it disappears.

Using Crystal Reports as the default for opening .rpt files

Hi all,
I know this is a simple question with a simple answer, but I'm baffled, so here goes. I'm using Crystal Reports 2008 and I have the Crystal Report Viewer installed on my computer. I want to open .rpt files with Crystal Reports 2008 as the default application, not Crystal Report Viewer.
When I right-click the .rpt file I have three options, Crystal Report Viewer 2008, Microsoft Visual Studio Version Selector, and Choose Program. When I select Choose Program, then click the Browse button, Crystal Reports is not available as one of the programs to choose.
When I look at the programs available via the Control Panel, I see Crystal Reports 2008, but I'm not able to select it as the default for opening .rpt files. I'm assuming the program file is in my Program Files folder somewhere in the Business Objects folder, but I'm not sure which file I need to set Crystal as the default program. Can someone please point me in the right direction? Thanks in advance.

C:\Program Files\Business Objects\Crystal Reports 12
then crw32.exe

Using properties from a propery file (for i18n support) in a html:select

<Newbie alert!>
OK, I' d like to be able to put text strings used by my JSP/Struts pages in a properties file so that we can change them for different languages. So I have a file referenced in struts-config.xml as such:
<message-resources parameter="com.myproject.resources.ApplicationResources"/>
This works fine and I can use tags like: <bean:message key="prompt.decision"/> in my JSP files.
I would like to be able to use strings defined in the property file also for a dropdown list like such:
<html:select name="displayForm" property="scoreFinalDecision" >
<html:option value="Approved"><bean:message key="option.approved"/></html:option>
<html:option value="Denied"><bean:message key="option.denied"/></html:option>
etc etc
</html:select>
This works, but I would like the value (i.e. value="Approved") also to be picked up from the
property file, not hard-coded like above.
How can I do that? I know that I could pick up the values from a Collection using html:options,
but I don't understand how that would help me get the values from the property file?
</Newbie>
Many thanks,
Tattersail (who notices that his forum doesn't undertand international characters: ��)

Well you could use an <html:optionsCollection tag
Just fetch the content of your property file in your action and then populate a vector with labelvalubean object (comes with the struts package) org.apache.struts.util.LabelValueBean
labels = new Vector();
//loop here
LabelValueBean label = new LabelValueBean("value","label");
labels.add(label);
//end loop
yourForm.setYourOptionCollection(label);
The in your form you write something like
<html:select name="displayForm" property="scoreFinalDecision" >
<html:optionsCollection property="your property here" />
</html:select>
it will iterate through your vector and display the options

Not to copy Price from PR to PO for text based purchases

Hello Experts,
We have a scenario, in which the PO will be created using a load file (LSMW - BAPI) with reference to a Purchase Requisition. All are text based purchases and no material master exists. I want the price from the load file to be taken as priority but no the requisition price.
I tried even by switching off the 'adopt price' option in the Functional Authorization for buyers and assigned to my user. Still the price from PR is always taken as priority but not from the load file.
Request for inputs to control this please
Thank you in advance
Chiru

Hi Chiru,
You tell your abaper to write a logic to overwrite the adopted PR price with the price of the load file. This will fullfill your requirement.
Chris
Edited by: CHRIS MM on Dec 23, 2010 2:29 PM

Is there a default for text size

Text size varies between 12pt and about 8pt - there does not seem tro be any logic that determines which. Size can be adjusted using CTL/+/- but you don't want to do this on every other page.

Actually, text on the page is sized by the person who makes the page. generally, web designers do pick something between 8pt and 12pt, but they can pick really any size they want. If you want to change to the default size that the page was designed in, it's CTRL and 0 (Zero, not the letter 'o', this font is bad at sowing the difference).
CTRL+/- is something that browsers have added to help people read text if the size the designer picked is difficult for them to read.

Using content from Strings attributes in Prefix text

Hello all you EDD experts out there,
I did not find this specific info in the struct app dev guide, so I am hoping someone else has figured this out at some point in time. Maybe this is trivial to programmers, but I am not one of them and also I don't know what the prefix definition string will allow. So all help is greatly appreciated.
In my structured framemaker EDD, I am using attributes to collect usage info. It would be nice to be able to use the Strings type attribute for this, instead of collating all the usage info into one single String type. But I need to use the content in a prefix string.
Prefix: used in: \t<$attribute[validity]>
If the validity attribute is of the Strings type and I enter multiple string values, only the first one shows up. How can I make all strings show in the prefix ?
Thanks in advance for the golden tip :-)
Jang

Hello Russ and Van,
I was kind of worried that I was crossing the limits of what FM EDDs can do. It is not a big deal - I can use the one string to store all values, as I have been doing so far. It just looks a little ugly when the string gets longer and the substrings do not wrap nicely. Of course going fully XML and XSLT etc would be another option but that is overkill for this particular client and they won't pay for that. Making the output a little nicer to look at is not a high priority, as this particular output is only shown in a catalogue of repository items to be used internally by my cient, i.e. it will never show in publications for users.
Thanks for confirming my intuition that I should stop searching for the holy grail...
Jang

How to use Results from Another Query for SAP BW universes

Hi Everyone,
I have two SAP BI universes.In my First universe I have Sales Doc no (dimension) and Orderqty (Measure) and in my second universe I have Sales Doc no(Dimension) and BillQty (Measure).
Here in my first dataprovider I have 1200 rows of data and in second dataprovider I have 75,000 rows. The report should fetch only the BillQty details that matches to corresponding Sales doc no in first data provider.
I want to place all these fileds into a single report like as shown.
(Datarpovider1) (Datarpovider1) (Datarpovider2)
*Sales Doc No* Orderqty BillQty
Here I am able to generate single report using merge dimension but it is leading to performance issues. I want to restrict the values at query level by passing the First dataprovider Sales doc no to second Data provider Sales doc number using Results from Anothery Query feature so that It can fetch only the matching records.
I tried it but it was giving the follwing error:
A filter contains a wrong value. You cannot run this query. (Error: WIS 00007)
How Can I get rid of this error. Can we use Results from Anothery Query option for OLAP universe. Are there any limitation on it.
All this I am doing in Webi Rich Client.
Appreciate your help
Thanks &in Advance
Kiran Saka

Hi Kiran,
I think the filter has a wrong operand. For example, a filter with an empty constant, or a filter that deals with numeric values is defined with an alphanumeric value.Check out for this.
Regards,
Neeraj

Why can I no longer specify my preferred font for text which has a link attached to it?

I use TBird to send old school, professional looking business letters with logo image header and footers. Recently, I am unable to apply my preferred font to the website link part of my footer. This seems to have become an issue after one of the more recent upgrades of TBird. Its frustrating as I feel good graphic design requires uniformity in font style/type and size. This seems no longer possible. Now when I attach a hyperlink to my website address it changes my preferred font to something that looks like Arial and locks both font and size. It looks crappy.

''Kits47 [[#answer-701080|said]]''
<blockquote>
The only way I know its 12 pt. is that I copy into Word and check the font size there.
</blockquote>
Huge error number one, and probably cause of your problem in the first place.
<blockquote>
I would really like to see TBird use point size for fonts.
</blockquote>
Thunderbird uses HTML, HTML is expressed in pixels.
<blockquote>
In terms of not having Papyrus on you Linux box, I suppose that's you're choice.
</blockquote>
Licensing actually, not choice. The font is licensed and distributed by Microsoft. See http://www.microsoft.com/typography/fonts/font.aspx?FMID=1113 for a list of products your recipient can install to get the font.
<blockquote>
In my outgoing email subject line I always specify that my reply is best viewed in HTML, full screen.
</blockquote>
HTML is the default for almost all mail so that does appear to be overkill. Full screen. Personally I would be just as likely to not read mail that required full screen. Mail gets about half a screen here.
<blockquote>
Most systems will automatically substitute fonts for ones not on that system, at least in Apple and PC systems. </blockquote>
Papurus actually has a higher chance of being present on a Mac system than a windows one as Apple have distributed it with OSX since 2003.
<blockquote>
Anyway all of that is a little off topic. I wanted help with why TBird intermittently messes with font size and style when I cut and pasting email responses to people.
</blockquote>
As I said at the beginning. Do not use word. Word first converts to RTF then to HTML (All done internally) The resulting HTML is extremely complex and to put it bluntly pastes as a whole page from which Thunderbird must extract only the relevant parts. (inside the body tag) The end result is the program ends up confused about what goes where.
<blockquote>
And, if there is some reason why sometimes, again I stress sometimes, it will not let me use the font of my choice for text that has a hyperlink attached to it.
</blockquote>
If your pasting from Word the most obvious thing will be that the hyperlinked text will have it's own font tags another reason I suggest you use the program your in.
* If you want it on paper use a word processor. It is what they are designed for
* If you want it in email use the email program to actually write your mail.
* If you want to guarantee the look on delivery send PDF attachments.

Export quality grainy for TEXT / TITLE

Hello there,
Am kind of a newb, but am getting used to the basics and am happy with the video export quality. For some reason, the TITLE objects are coming out grainy, even when viewed at 100% size. I tried different output types, bitrates, changed fonts, font size, position, etc. Put black background behind, removed background, no matter what am still getting the fonts looking crappy once exported.
Some screenshots of what I see in the Premiere Pro output preview / workspace, and then a second shot showing the resulting output (same result in diff bitrates, just chose one as example)
In Pro:
http://fms.whoajack.com/textIssue01.png
Exported:
http://fms.whoajack.com/textIssue02.png
Any ideas?
Thanks for any suggestions,
Greg

DV is far from the best codec for text. But the real problem is that you're using FCP's built-in text generators. Instead, use the Boris Title 3D and Boris Title Crawl generators. They produce much cleaner vector-based text and have a ton of more options for creativity.
-DH

How to change the browser used for Google search from context menu of selected text?

How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser).

How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser).

I want my "From" address to default to a specific one. I have deleted the outgoing mail server for the one I don't want to use but it still comes up write

Since Comcast will no longer allow me to "send" from my AOL Address I need to change my "from:" address on every e-mail I send. I thought I could make my Comcast outgoing server the default one and that would take care of it - it didn't. Then I thought I could just delete my AOL outgoing server and Thunderbird would then have to use my Comast Outgoing Server - it doesn't. I can continue to try and remember to change the
FROM with the drop down list but it would sure be nice if I could save this aging brain of mine and make the software default for me.

Why not just add an AOL server to Tools/Account Settings/Outgoing Server (SMTP) and then have that server selected in Tools/Account Settings/<i>aolaccount</i> in the Outgoing Server (SMTP) dropdown in the right pane? Use these settings: smtp.aol.com on port 465, SSL/TLS security, Normal password authentication, User name = your screen name.

I bought some ringtones and alerts from itunes and it won't let me use them for text alerts or voicemail.

I bought some ringtones and alerts from itunes and it won't let me use them for text alerts or voicemail. Am I doing something wrong? Other ringtones I have downloaded work.

What does won't let you use them mean exactly?

Using Javascript to create concatenated string from checkbox fields to one text field

Hi. I have a PDF form that I am trying to have output to a spreadsheet that matches my database schema. Here is the dilemna:
* I have a set of checkboxes for available languages (LANGUAGE_ENGLISH, LANGUAGE_SPANISH, etc.) When they export to spreadsheet, the value is TRUE.
* I need to take values from checked boxes and create a single string in a text field called LANGUAGE_DISPLAY (so my UI will not need to do the concatenation). If LANGUAGE_ENGLISH is TRUE (checked), append "English, " to LANGUAGE_DISPLAY, else append "". Then, if LANGUAGE_SPANISH is TRUE (checked), append "Spanish, " to LANGUAGE_DISPLAY, else append "". And on and on
In the LANGUAGE_DISPLAY text field properties, I am inserting a Custom Calculation script to try to achieve this, but am not getting any results. I tried teh following even trying to pull the checkboxes default values and string them together:
box1 = this.getField("LANGUAGE_ENGLISH").value.toSrting();
box2 = this.getField("LANGUAGE_FARSI").value.toSrting();
box3 = this.getField("LANGUAGE_MANDARIN").value.toSrting();
event.value = box1 + ', ' + box2 + ', ' + box3;
I also played with this to get the desired strings output...but to no avail:
if ( LANGUAGE_ENGLISH.rawValue == true )
box1.rawValue = "English, ";
if ( LANGUAGE_FARSI.rawValue == true )
box1.rawValue = "Farsi, ";
if ( LANGUAGE_HEBREW.rawValue == true )
box1.rawValue = "Hebrew, ";
event.value = box1 + box2 + box3;
Then I tried to simplify to see one field output so used this script...still no results:
event.value = "";
var f = this.getField("LANGUAGE_ENGLISH");
if ( f.isBoxChecked() == true) {
event.value = "English";
Couple questions:
1) Am I on the right track with any of these scripts?
2) Is there something else I need to do to get the script to run before running the Create Spreadsheet with Data Files comman in Acrobat to get my csv file output? Maybe there needs to be some event to get the checkbox values read by that field in order to calculate/create the string.
Appreciate any help you can provide.

LiveCycle Designer has shipped with all Acrobat Professional versions since the "Professional" version was introduced with version 6.
You do not let us know want results you get in the field or the JavaScript console.
Using:
box1 = this.getField("LANGUAGE_ENGLISH").value.toString();
box2 = this.getField("LANGUAGE_FARSI").value.toString();
box3 = this.getField("LANGUAGE_MANDARIN").value.toString();
event.value = box1 + ', ' + box2 + ', ' + box3;
returns "Off, Off, Off", when no box is checked and returns "Yes" for the appropriate box being checked when the default value is used for the creation of the check box. So if one would make the 'Export Value' of the box from the default value of 'Yes" to the appropriate language, one would get a more desirable result. But for each unchecked box the value would appear as "Off". So one needs to change the 'Off' value to a null string. But one is still left with the separator when there is an unchecked option.
Using the following document level function:
// Concatenate 3 strings with separators where needed
function fillin(s1, s2, s3, sep) {
Purpose: concatenate up to 3 strings with an optional separator
inputs:
s1: required input string text or empty string
s2: required input string text or empty string
s3: required input string text or empty string
sep: optional separator sting
returns:
sResult concatenated string
// variable to determine how to concatenate the strings
var test = 0; // all strings null
var sResult; // re slut string to return
// force any number string to a character string for input variables
s1 = s1.toString();
s2 = s2.toString();
s3 = s3.toString();
if(sep.toString() == undefined) sep = ''; // if sep is undefined force to null
assign a binary value for each string present
so the computed value of the strings will indicate which strings are present
when converted to a binary value
if (s1 != "") test += 1; // string 1 present add binary value: 001
if (s2 != "") test += 2; // string 2 present add binary value: 010
if (s3 != "") test += 4; // string 3 present add binary value: 100
/* return appropriate string combination based on
calculated test value as a binary value
switch (test.toString(2)) {
case "0": // no non-empty strings passed - binary 0
sResult = "";
break;
case "1": // only string 1 present - binary 1
sResult = s1;
break;
case "10": // only string 2 present - binary 10
sResult = s2;
break;
case "11": // string 1 and 2 present - binary 10 + 1
sResult = s1 + sep + s2;
break;
case "100": // only string 3 present - binary 100
sResult = s3;
break;
case "101": // string 1 and 3 - binary 100 + 001
sResult = s1 + sep + s3;
break;
case "110": // string 2 and 3 - binary 100 + 010
sResult = s2 + sep + s3;
break;
case "111": // all 3 strings - binary 100 + 010 + 001
sResult = s1 + sep + s2 + sep + s3;
break;
default: // any missed combinations
sResult = "";
break;
return sResult;
And the following cleaned up custom calculation script:
box1 = this.getField("LANGUAGE_ENGLISH").value;
box2 = this.getField("LANGUAGE_FARSI").value;
box3 = this.getField("LANGUAGE_MANDARIN").value;
if (box1 == 'Off') box1 = '';
if (box2 == 'Off') box2 = '';
if (box3 == 'Off') box3 = '';
event.value = fillin(box1, box2, box3, ', ');
One will get the list of languages with the optional separator for 2 or more language selections.

Use language from BP as default for texts in activitys

Similar Messages

Maybe you are looking for