Use LINE OUT or use USB for LINE OUT?

Using my MacBook to run iTunes at my wedding in a few weeks.
Should I just stick with the in built LINE OUT?
Or would using a USB device to give me a LINE OUT be better?
Does anyone know the specs on the line out in terms of "v"
Just worried about using another device could introduce more thing to be set as I will not be running the MacBook someone else will be so maybe I should keep it simple.
I just need to to be working without any problems for 5-6 hours without anyone touching it.
Only thing I have noticed is the output on the line out is a little on the low side, I need to crank the amp a little more than I do with other sources like a dedicated CD player.
I do have access to a Griffen iMic (model 1) but do I need it?
R

Thank you for the input.
But phase cancellation is not only occur from having 4 speakers facing each other, a certain degree or audio source placement might trigger that or un-wise effect applied that instead create "echo" or delay fx it create phase cancellation if played with the original audio source. And phase cancellation will not only result of cutting it, it also might resulted of boosting it if it was the same frequency waveform.
But it is indeed could happen so I hope the dj for his wedding ceremony wise enough with the eq and efx. And beside the audio for wedding ceremony is not as crucial as piano resital so if a bit of phase cancellation occur might not noticeable.
But thanks again for the input.
Peace out.

Similar Messages

Force audio out laptop's USB for outboard DAC?

I have an HP laptop running the Realtek HD audio driver 6.0.1.5869. I use this laptop as a frontend to a home entertainment system that includes a high-end audio/video receiver (featuring Burr-Brown DACs). When streaming audio, I would like to force the audio output from the laptop through its USB port and on to an open set of Yamaha. I intend to do this by way of a male USB to male RCA cable (commonly available).
How can I achieve this using the Realtek software user-interface? If I click the [Digital Output] tab and select [Set Default Device], will this suffice?

I am by no means an expert with your audio equipment.
The USB ports themselves, by default, are not recognized as audio outputs.
If the external audio device you are connecting with a USB-RCA cable is not recognized as a n audio device (it more than likely will not be), then it more than likely will not. Of course, I do not have access to this exact setup to test and confirm.
To see what sound devices are available as an output, you can go to the Start menu, search for Sound, and open this result in the control panel category.
Once that opens, the available output devices will be listed. You may need to right-click in the Sound window to get the option to view disabled or disconnected devices. Just make sure to do this with the USB/RCA cable connected to your desired output device.
In a quick search for DAC, I did find this. It looks like this DAC works by using a USB-A to USB-B cable to connect the device to a PC and then has RCA out jacks to connect to an audio system. This seems more of the optimal configuration to accomplish this task.
Review this document document to get an idea of what the Sound panel should look like in Windows with the DAC properly detected and available as an output. I know this is not your equipment, but Windows Sound panel should work in the same way for all sound equipment that it is compatible with.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

USB for Audio Out

I am looking at buying a Bose Companion speaker system. The Bose Companion Series 5 plays music through a USB connection. If I connect the speakers via USB on the Airport Express will it output audio through this connection via iTunes?
Thanks,
Mike

Thank you for the extremely fast and quick response...
Mike

Define Additional Fields for Line Item Display

Dear gurus,
I'd like to ask for your help again, please. I've just added the field BKPF-USNAM to the list of fields of FBL1N using IMG:" Financial Accounting-> Accounts Receivable and Accounts Payable->Vendor Accounts->Line Items-> Display Line Items->Define Additional Fields for Line Item Display". When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
Is there another transaction that I must set new columns to FBL1N.
Thank you very much.
Paresh Jivani
Edited by: Jivani Paresh on Jul 31, 2009 9:16 AM

Hii,
When you will execute FBL1N, it will come up in standard format. if you want to see any specific fields,then you have to go to Change Layout button and choose from available fields as per your requirement and then execute.
For future reference, you can save this layout as a Variant and then you can directly execute that report using that variant.
Dhara D.

Additional fields for line item display for Vendor Accounts

Hi,
The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
Could you help me to know how the same will be displayed in ECC 6.0 system.
Thanks

In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
Thanks

Distortion workaround: can chip swap using line out jack for rear out ja

I am using a SB Audigy EAX. My headphones sound like a blown speaker mostly out of left ear. I tryed everything including reinstalling xp on my dell and nothing worked [yes I tried other headphones to no avail]. Finally I played around with the balance and realised that the left and right channels were leaking together slightly so I think there is a physical problem on the card. As a temp solution I have set my card to use four speakers and plugged my headphones into the rear out which is a different jack on the card. It sounds fine from the rear out jack but I wish there was a way to have the card use the rear out jack for line out output. In other words is there a program or driver that can tell the chip to swap line out jack for rear out jack? My card is no longer under warranty and I only ever use heaphones. The problem with my temp solution is that some winamp plugins and games don't function properly.

smokie wrote:
On my sound blaster ex, when connecting through the analogue 6 channel output, Line Out 3 is a 4 pole mini jack. My sound system is only 5. and doesn't need the centre rear speaker. Does any one know if in this case I can just use a standard 3 pole stereo jack for subwoofer and front center?
For analog 5. it should work. See the user's guide.
jutapa

I need to cancel a line that is no longer used but I'm told that, since I transferred an upgrade from the unused line, the contract on the unused line was extended by two years. If I need to cancel both to get out of this, so be it but I'd rather not and

I'm paying for 2 smartphone lines when only one is in use. It's a waste of money that I can no longer afford. I would like for someone to present me with options or I will have to seek an alternate service provider.

Ok so now there are presumptions of both my ignorance and my dishonesty. This has become the most surreal conversation I've had in some time. I've been a VZW customer for over 10 years and no, this is not something I've ever done before. In the past, if I wanted a new phone before my 2-year deal was up, I paid full price for the phone and kept living. That's how the system works, right? In this instance, I had two lines on my account, each with different contract end dates. The secondary account was 6 months out-of-contract and unused but, for personal reasons, I kept the line in force. The person who used the account setup another account with VZW with another phone. But I kept the line active, just in case.
In the meantime, when reviewing my account online, I noticed an option on the secondary account of "Transfer upgrade". Given my understanding of the definition of the word "transfer" as well as my previous dealings with VZW phone upgrades, it seemed logical that, since both phones were under the same master account, the upgrade with its requisite contract extension would apply to the line that actually used the upgrade eligibility. It was therefore, my expectation that the primary line would either have two years tacked on to its current end date or, at the very least the contract end date for the primary line would be 2 years out from the date the upgrade was exercised. Both options were acceptable to me since, at that point, I was not considering the termination of my relationship with VZW. I knew I needed a phone with more battery life than the one I had and carrying one of those battery charge packs around wouldn't work for me. So, I clicked the transfer upgrade button on the secondary account. I then saw the primary account show as eligible for an upgrade. At that point, I upgraded the phone on the primary account. There was no point where I was notified of a 2 year extension on the secondary account and, once I clicked the "Transfer upgrade" link, there was no mention of or reference to the secondary account.
I'm not sure of who I'm replying to or where they are from so I cannot speak to the people they encounter on a day to day basis. I have not stated nor do I have any desire to get away with a free early upgrade. It should be noted that we are discussing a discounted upgrade, not a free phone. I still paid $150 for the phone and was happy to do it. However, this idea that I'm trying to circumvent the system is offensive. I'm not trying to get away with anything. As I've said in previous posts, I expected to burn discounted upgrade eligibility on the primary line for a minimum of 2 years. I actually expected the new contract end date to be 3 years away, which would have been more than fair for all concerned. Fairness, it seems, is running in short supply.
If all you have to say is that I'm stupid, ignorant, or dishonest, please don't bother to reply. If you can in some way help to bring this to a satisfactory resolution, I'm all ears. Can you hear me now? Good.

I was wondering, would be able to use my eligible upgrade on 1 phone line to buy a phone for another line?

Hey, I was wondering if I would be able to use my eligible upgrade on one phone line to buy a phone for another line?.
Also, I saw a commercial on TV about getting a plan with 10 gb of data for like 130 a month, that does include the cost of both phones instead of 130 + 40 + 40 for each smartphone on the line?...

SumWiiTodd wrote:
Also, I saw a commercial on TV about getting a plan with 10 gb of data for like 130 a month, that does include the cost of both phones instead of 130 + 40 + 40 for each smartphone on the line?...
The $130 price is actually $110 and is for 2 situations, none of which involve subsidized contract upgrade.
1) Edge payment plan. Cost of service is $110, but then the monthly phone payment added to that, usually around $25/phone
2) phones out of contract, then it is $110 with no extra charges.
The the costs break down is $80 for data, and $15/line

Busy out phone when non CAD line in use

Hi,
Is there a way to busy out a phone when a second line is in use which isnt the UCCX line ?

I am not sure of your setup, but we have transitioned our ACD Lines to be the 1st extension on the phone, so that when an agent picks up to make an outbound call they make themselves "Not Ready". This eliminated a number of issues for us. If they receive a call on their "non-ACD" line they still have to make themselves Not Ready, but if they fail to do so they can either iDivert to reject immediately, or wait for the RNA to pull the call back into the queue. One note on putting the ACD line on top is that it will impact Call Forward All, but they can still change this on the ccmuser page. Also, I make the ACD line an "alternate" extension in Unity (but I don't put Call Forward to Voicemail in CUCM on the ACD extension), so that their light, and voicemail buttons will work. The changes above have all but eliminated all of my headaches regarding the Ready/Not Ready issue. I started with just a few users, and now all of them have it setup that way.

TS1587 Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick, my imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols, need h

Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????

It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

How to set line style to be underline for links using PDLinkAnnotSetBorder

Hello,
I want to set link line style to be underline. am not finding any difference for solid and underline except cosname of S (BS) is U or S
Please anyone tells me how to change the link line style to be underline.
Thanks,
Sow

Thanks for reply.
I am using code as show below to change line style to solid and dashed.
PDLinkAnnotBorder pdLinkBorder;
PDLinkAnnotGetBorder( rpdAnnot, &pdLinkBorder);
//For solid
pdLinkBorder.dashArrayLen = 0;
PDLinkAnnotSetBorder( rpdAnnot, &pdLinkBorder);
//For dashed
pdLinkBorder.dashArrayLen = 1;
for( int iIndex = 0; iIndex < PDAnnotMaxDashes; iIndex++)
{ ASInt32 iThickness = 3;
pdLinkBorder.dashArray[iIndex] = Int32ToFixed( iThickness );
PDLinkAnnotSetBorder( rpdAnnot, &pdLinkBorder);
how should I do for underline. If am using cosobject how to change line style to underline using cosobject
Please let me know.
Thanks,
Sow

How to create a muli line text area using JavaFx

Hi all,
Since the preview SDK does not contain TextArea any more, I am wondering how to create a muli line text area using JavaFX. The behaviour of this text area/field should be somehow similar to JTextArea in Swing or StyledTextWidget in SWT.
Does JavaFX have any support for this? What would be a sensible approach to create such a widget?
Thanks for your suggestions,
br michael

This is a pretty old thread (I know I came across this while searching for something similar recently), but I figured I'd throw this out there in case other people might find this useful. As I write this, JavaFX's latest version is 1.3... which may have added the needed functionality since the last post.
You can now create a multi-line text area using a TextBox and by specifying the nubmer of lines and setting the "multiline" value to true. It may not offer all of the same functionality as JTextArea, but it did the job for what I needed... newlines by pressing enter, scrollbar if text surpasses height, etc.
Here's a simple example:
Group {
   content: [
      TextBox {
         text: "This is a multi-line textbox"
         lines: 10 // <-- this may/may not be necessary depending on your situation. Default is 5.
         multiline: true
}Edited by: loeschg on Jul 29, 2010 2:59 PM

How to trace the message in which line of program used?

Dear fellows,
       Many times when we run a t-code (especially standard t-code), it will return many message log. but when we debug the t-code to trace the error message, it is difficult to find why raise this error message. Even we can not find in which line of program. We can not use the where-to-used list in SE91 to trace, because it is not written like this:       message 033(FD) TYPE E.
       For example in validation(GGB0) we use some message, but when this message come out, we didn't know this message in which program raise. And it also can not be traced using message at in debug mode.
       In many case, the way of using message is not easy to be trace , but if we can find which line of program to raise this message, would help a lot for finding the cause problem.
       Is there any tool for us to trace message ?
       Thanks for your sincerely answer!

Hello All,
If the message log is filled like this
L_S_MSG-MSGTY     = 'E'.
L_S_MSG-MSGID     = 'BL'.
L_S_MSG-MSGNO     = '303'.
L_S_MSG-MSGV1     = '007'.
Can you trace this message by putting a watch-point/break point? I guess no! If some has YES as answer, please feel free to correct me.
That is why whenever filling a message log/return table it is important that we ensure that the message can be traced back using "where-used". Hence the usage of MESSAGE...INTO (or the pre-historic, IF 1 = 2 ... MESSAGE ... ENDIF) construct.
BR,
Suhas

Newby question. Trying to fill a section but using fill and/or stroke only changes line colour

Hi,
Been trying to work this out for hours now so if anyone can help I will be forever thankful!
Basically, I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the colour of the line.
I'm not sure if that makes sense or if anyone can help based on that but I can post pictures or something if that would help?
I also understand that the magic want thing might be where I've went wrong at the very start maybe?
Thanks for any help at all!

I don't know if that helps you understand at all?
For example I want to fill the inside of the square but when I'm hitting the fill and stroke buttons they're just changing the colour of the line.
I think I might just start from scratch again! Don't know where I've went wrong.

Is there any way to find out what a specific line of data usage was for?

There is a line on my bill for 97 MB of usage while I was bowling? I was not using my phone. How can I find out what it was doing for that specific charge?

Just like you said earlier
3. Re: Is there any way to find out what brush is applied to a path?
imagecollection Apr 7, 2015 6:01 PM (in response to Silly-V)
The skill of scripting in Illustrator is to (due to necessity) find the most difficult way to achieve the simplest of tasks...
so to retort I say this;
“I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail.”
― Abraham Maslow, Toward a Psychology of Being

Use LINE OUT or use USB for LINE OUT?

Similar Messages

Maybe you are looking for