Use log-name and not real name

Make it so users can use the username insted of there real name

Updated: 2015-07-20Hello!
Your idea has been submitted a while ago but unfortunately hasn't gathered enough kudos (25 per year). In order to keep an overview of the active ideas in this forum, we will close this idea for now. However this does not mean that your idea has been declined by Spotify.
If you still feel strongly about your request, we encourage you to post your idea in a little different form again! Maybe now is the right time to receive the support of our community for your suggestion! ;)
Do you have any further questions on how the idea exchange is managed? Just click here!

Similar Messages

Could I use two regular computer to achieve realtime communication using the Ethercat and Labview Real Time Module?

Could I use two regular computers (one acts master , another one acts as slave using the Ethercat Internet Card) to achieve realtime communication using the Ethercat and Labview Real Time Module? if it could, what hardware should I purchase from the NI ?
Thank you!

Hi Xiaolin,
NI doesn't offer Windows based Ethercat master or slave software. Only LabVIEW RT can run the Ethercat driver.
However, you could use a LabVIEW RT target as an Ethercat master and use the Ethercat Internet Card with a slave PC (note: I think this will work from the Beckhoff description of the card you are describing. The card should integrate like any other non-NI slave. However I haven't tested the setup and don't advise saying it will work until you have tried).
You can use any NI RT target with two ethernet ports as the Ethercat master. This could be a cRIO, PXI or RT Desktop.
Jesse Dennis
Design Engineer
Erdos Miller

Ow can I use my time capsule as a time machine backup without using it wirelessly and not as a wireless router?

How can I use my time capsule as a time machine backup without using it wirelessly and not as a wireless router?

bzb888 wrote:
I have a wireless transmitter already, would like to use the capsule just as a back up drive, I tried hooking up from the ethernet port on the imac to the one of the ports on the capsule but then my Wifi would not work. do I hook the cable to the port with the circle or the arrows?
It is better to have the TC as part of the main network in bridge. You do not need to run wireless.
If you want to use the TC plugged in by ethernet and still use wireless for internet, that is possible but the setup is rather more complicated.. the computer must not get confused about which device to use as a gateway or dns server.
See info in this thread on setting this up.
https://discussions.apple.com/thread/4817218?tstart=30
I need to add.. a USB drive would be cheaper, faster and more reliable. It is really poor use of a TC.

HT204406 I am using iTunes Match and want to "uncheck" songs so that I can use my shuffle and not hear every song in my itunes.

Can I "uncheck" songs in my iTunes while using iTunes Match? I want to use my shuffle and not hear every song in my itunes. I use a MacBook Pro, iphone 4S and an ipad.

I know of no way to do this.
Itunes ringtones are for iphones.

For the Attribute Movement type(BWA) we use Value " 201" and not "101" why?

Hello Experts,
We are in SRM 7.0 classic scenario,
For the Attribute Movement type(BWA) we use Value " 201" and not "101" and provide the Source syst(backend R/3)
Can you all plz help me understand what is the difference if use value "101" for the Attribute Movement type(BWA)
Also,can you all plz help me understand if we shd use value "101" or "201" for the Attribute Movement type(BWA) and under what scenario.
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

Hi,
Movment type " 201 maintained for the Classic scenario only.
It is necessary to maintain the attribute if the default material group for a given user (or) sit is set to a backend logical system. The EBP system knows that if the user is set for backend procurement ,that there might be a possibility for a reservation to be generated therefore it checks to see that a value for this attribute is maintained. The BWA value should be defined for the as 201 preceeded by the logical system and a backslash.
101 should not be used. This isfor the Good receipt.
In the extended classic scenario when you do the confirmations in SRM the movement type 101 will be created in the
backend system (R/3 or ECC6.0)
Regards
Ganesh Kumar .G

Re: Photosmart 5514; must you use setup cartridges and not standard 564 cartridges during setup?

Re: Photosmart 5514; must you use setup cartridges and not standard 564 cartridges during setup?

Yes.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT4759 My "notes" made on phone disappear on charging phone using apple computer and not found on iCloud either...what setting do I need to adjust?

My "notes" made on phone disappear on charging phone using apple computer and not found on iCloud either...what setting do I need to adjust?

You got it.
Notes - if notes are created in icloud notes (you may have multiple notes accounts) - icloud notes and only icloud are synced over all your devices and icloud server, so if you want to see those on the server you can go and manage (edit) on www.icloud.com.
Since notes synchronize by using same IMAP email server - turning them "ON" will prompt you to create mail address.
To add to that you do not have 10.8 that has it's own notes app, so your notes go to Notes folder in your icloud/me/mac mail and synched by your mail server.

Open new window using java code and not in script

i need some method like sendredirect or forward . where i can make some codes so as to open a new window.
actually i am calling a jsp from one jsp file where a lot of dynamic parameters are sent. and in the second jsp i call a servlet which works to download a file to the client side. i want the file should open in new window not in the browser from where it is initiated.
else can any one say the mime type where i can open file(a xls file) in xls window and not in browser which is not needed as user needs to press the back button(present in browser)

Hi,
in your code
the following code, which is used to set the file name that is to be downloded
response.setHeader("Content-Disposition", "*inline*; filename=somename.xls" );
to be replaced by
response.setHeader("Content-Disposition", "*attachment*; filename=somename.xls" );
it will work fine try it.
Edited by: Bhaskar.krishna on Jan 17, 2008 12:56 AM

Using the text and not the value of a filed

Hi there,
I'm programming a pdf form using life cycle, I'm using the following script in a "SEND TO" button in order to email an XML file with the data extracted from the form:
var emailAddress = F.P1.Line.rawValue;
var veicle = F.P1.Vehicle.rawValue;
var shipper = F.P1.Shipper.rawValue;
var date = F.P1.Date.rawValue;
event.target.submitForm({cURL:"mailto:"+emailAddress+"?subject=Booking request from "+shipper+" date:"+date+" &body=Dear Sirs,Please find attached the completed PDF booking form for the following "+veicle+".",cSubmitAs:"XML",cCharset:"utf-8"});
The problem is that I would like to use in a variable the text and not the value of the F.P1.Line.raw field.
Thanks in advance

Hi,
This is not the appropriate forum to post this type of question. Please post all designer related queries in LiveCYcle Designer Forum to receive better response.
From you query I understand you have a dropdown box with name as "Line". And you want to the "text" part of the selected item and not the "value" part. If it is so then do the following -
1. Write the below code in onCHange event of your dropdown box.
var ddValue = this.boundItem(xfa.event.newText);
var nodeList = this.resolveNode("#items").nodes;
var ddText = null;
for (var i = 0; i < nodeList.length; i++)
if (this.boundItem(nodeList.item(i).value) == ddValue)
ddText = nodeList.item(i).value;
break;
global.selectedtxt = ddText;
In the above code I am basically getting the "text" part of the item selected and then I am storing it in a global variable.
2.
Write the below code on click event of your button -
var emailAddress = global.selectedtxt;
Hope this helps.
Thanks,
Shivajiv.

Getting Segment in the Asset Master ( Using SEGMENT Badi and not Prt Ctrs)

Hi,
We need the field Segment to be populated in the Asset Master to get the correct P&L Statements ( The depreciation run, retirements etc to post to the Segments) . We are using the segment Badi: FAGL_DERIVE_SEGMENT to derive Segments and NOT the Profit Centers
However, the field Segment missing in Asset Master (Class). The field segment is missing the Time Dependent view while creating the Asset Master Data. This is so because in the Configuration of Asset Accounting --> Integration with GL --> Additional Account
Assignment Objects is not showing the Segment field.
According to SAP help, I CAN DO THIS as mentioned
http://help.sap.com/erp2005_ehp_05/helpdata/en/94/f13167dbae436a85a4a1d3ad75f274/frameset.htm
But, as mentioned in the SAP help link above, I am not able to find " Activate segment reporting in
Customizing for Asset Accounting under Integration with General
Ledger --> Accounting Segment Reporting --> Activate Segment Reporting"
Also, from another SAP Help link
http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/fb/84a48d665e4fa9a2dc7b60adeb7c7d/frameset.htm
I found that activation of Business Function FIN_GL_REORG_1
or FIN_REP_SIMPL_3 could also get us the Segment Field in the Asset
Master Data's Time Dependent Field
However, when I goto Transaction SFW5 - Change Business Function Statuswe are not able to find these Business Functions (FIN_GL_REORG_1
or FIN_REP_SIMPL_3 )
Regards
KS

Hi, Activate segment reporting is available only in EHP5.
If you'renot using EHP5, then you can't to update segment as well as profit center in asset master data.
The only way is to put co objects in asset master data, and derive PC,segment based on this co objects

Help needed please.. how do I remove my credit card from itunes? just discovered over $450 of charges when I looked at my email... Kids had no clue they were using our money and not their gift cards

Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Accepted forms of payment > http://support.apple.com/kb/HT5552
Changing Account Information > http://support.apple.com/kb/HT1918

In order to use a US government web software, I need to use version 2, and not a current version. Is there anyway I can download an older version?

The US Food and Drug Administration uses an authoring browser-based system for creating SPL files called XForms. According to the FDA, the only version of Firefox which is compatible is version 2.0.0.13. The current version of Firefox 3 does not work with the plugin (Mozilla XForms 0.8.5 Add-on).

No need to use the unsupported and insecure Firefox 2, you can use XForms version 0.8.7 with Firefox 3.6, available from https://addons.mozilla.org/firefox/addon/mozilla-xforms/

Why is Merge into single pdf using InDesign CS3 and not CS4 ?

I'm new to this so the question may be trivial, but it beats me:
I've created some InDesign files in CS4 and want to combine them into one PDF. So I opened Acrobat 9 Pro and
navigated to "Merge files into single pdf". I chose the CS4 InDesign files to Add and clicked the Combine Files button.
BUT, this starts up InDesign CS3 and not InDesign CS4 and returns a pop-up saying "unidentified error".
Why is starting CS3 InDesign and not CS4, and what is the "unidentified" error ! ?
As background I intially installed CS3 and then updated to CS4, leaving the CS3 applications intact. When I initially
bought CS3, just before CS4 was released I may have created pdfs from InDesign as an experiment, but it is possible I have not done this
since upgrading to CS4.
Thanks for any help

Thanks Michael, I was not aware of quality issues. Actually this is not really significant for my usage this time. What I'm doing is just using ID to capture notes/images/links etc in several free format ID documents. I then planned to merge them quickly into one pdf using Acrobat. I can easily shuffle the file order around to create a handy portable pdf reference document with the Merge feature.
Doing something similar from ID seemed to me to require me to create pdfs for each ID doc and them to merge them in Acrobat. I did start to write a simple script to do this in ID, but I then realised that I wanted the ordering to vary and the ID files would likely to change. Then I found the merge and bingo, that solved it..... Well it solved it on another CS4 installation that had never seen CS3, but not on my machine which had been upgraded from CS3.
I tried looking in the registry for obvious entries that might point Acrobat to use ID CS3 rather than CS4, but couldn't spot anything. I wonder if there is something buried in there ?
Thanks again for helping
Regards.

HOW TO display a simple line of text if the user isn't logged in and not display it if they are?!?!?

there must be a way to display a simple line of text (or a link) if the user isn't logged in (as wholesale customer), and not display it if they are?!?!?
it's a basic kind of <php echo> var type of function.... there must be an equivalent in this BC system..... anyone?!?!? PLEASE!
thank you
Chris.

ok, after chattting with LIVE SUPPORT i've discovered {module_isloggedin}
now i just need to integrate it into my Online Store modules!

Where is CS5 preference to use new window and not tabs?

Hi,
I prefer a new window rather than lose screen space to tabs.
Is there a preference somewhere to open new document in new window and not as a tab?
Thanks,
Garrett

You can use the "Float in window" command (available in Window | Arrange menu) - but this will work once you have created a new doc.

Imessage using apple id and not phone number

When using imessage it is being sent from my apple id and not from my phone number, when I go in to the message settings my phone number is greyed out. Then I went into the called id and my phone number is the one listed as the caller ID yet evertying is still being sent through my apple ID

check in settings > messages > send & recieve and look for start new conversation from and you should be able to change it from there
dante

Use log-name and not real name

Similar Messages

Maybe you are looking for