Use mac mini as a2dp receiver?
i have 10.5.7 installed, and have my mac mini hooked up in the living room to my stereo music system which includes some pretty kickass speakers. With the new iphone 3.0 software now supporting a2dp streaming, as well as having a macbook with some of my music, is it possible to setup a2dp streaming from iphone to mac mini so that my music plays through mac mini to my stereo system? i can see so many uses for them, guests with their iphones with music, plus my gf has her macbook with her own music, and i know i can do some form of library sharing, but it would be much much simpler for her to simply be able to connect via bluetooth and stream music over bluetooth rather than use her macbook while at the same time using kb and mouse fo mac mini to stream her music, too complicated for her to bother with it.
also no, i cant and do not want to buy an airport extreme, mainly because i alreayd hvae too many wires in the living room and am trying my best to cut down on them, secondly because i dont want to spend 150-200$ on it, and thirdly my mac mini connects with my stereo via a usb dac, and theres no input to be able to plug in a separate music bluetooth receiver.
this doesnt jsut have to apply to streaming from iphone or macbook, its a general leopard/software question on how to go about accomplishing somethin like this.
That is true, so you'd be limited to using a USB to Ethernet adapter and connecting as previously discussed or transferring your data via a Wireless network connection. Frankly both are not optimal. You'd be better off getting a decent USB 2.0 external hard drive. With an external you could also use time machine (or your preferred backup method) from the Mini to back it up as well.
Similar Messages
-
I have Mac Mini that I connect wirelessly. I want to share that internet on this mac mini with my receiver using wired internet. Is it possible? How?
Is it the same user/iTunes account or...?
Syncing to a new computer should give you the opportunity to replace the exisiting contents with the new. -
Bought Used Mac Mini...need help to change email for updates
Purchased an used Mac Mini and I want to change my defaults to my name and get rid of the sellers name, I also need help in changing the email default for getting my updates from Apple. That's the most important to me... I've got 5 updates waiting and the message I receive is to get my updates from the sellers email address. Thanks!!!
What OS is on your Mini? What year/model is the Mini? The seller should have reinstalled the OS that came with the Mini instead of just selling it to you as is.
Once you determine the OS, you can erase your Mini's Macintosh HD and reinstall the OS which will allow you to setup your own account during the Setup process. -
Used Mac Mini and reinstalling OS X
I bought a used Mac mini (late 2009) with mountain lion installed. The previous owner didn't do a factory reset, so I attempted to by using OS X Utilities and reformatting the hard drive. I then attempted to reinstall OS X, but since I'm not the original registered owner, I can't get past the login dialog during the license verification stage. What should I do at this point?
Any suggestions would be greatly appreciated. Thanks!The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like. -
No signal to VGA monitor using Mac mini display to VGA adaptor and first time boot Mac mini
Just unpacked Mac mini and powered up using Mac mini to VGA display adaptor and VGA monitor. There is no signal to the monitor ( power is on).
How to see the display?[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out. -
My Adobe Flash CS6 Color Picker has ODD colors. I'm using Mac Mini OSX 10.8.1. Is there a fix?
My Adobe Flash CS6 Color Picker has ODD colors. I'm using Mac Mini OSX 10.8.1. Is there a fix?
I click on the color picker and where I have seen the normal #0000ff blue color on my windows computer, this mac Mountain lion version shows a purple-ish color. Oddly, If I enter the hex # into the color picker, and use it as a fill, the correct color displays on the stage but when i use the eyedropper on that color, it shows it as the purple color again on the toolbar.
I've seen a similar thing like this happen when using adobe photoshop. However, the usual solution is to just make the managed color profile set to monitor RGB. The only downside with Flash is there is no preference to set that. The color palette in Adobe Photoshop displays as it should with the correct blue.
I should also note that I'm using a Samsung 941bw monitor with my mac mini which could also be part of the problem.
I figured i'd make this post anyway just in case it's the OS & Adobe Flash CS6 and not the monitor.
I've included a screenshot as well that shows that i've chosen the purple color and then made a rectangle shape on the stage and it comes out blue.
Thanks ahead for your response(s)
-LineSeems misleading that on the adobe site for Adobe Flash CS6 it says:
System requirements:
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems.** -
I want to install Snow Leopard Server on our MacPro(2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need topurchase another copy of Snow Leopard Server?
The OS disks that are shipped with a particular product
are set up so that tey will only install on that product.
It will install on any Mini of that exact vintage, but that
is all.
This is to prevent people from doing exactly what you
are trying to do. The license for OSX shipped with any
is only valid for that product. Also, Snow Leopard,
including Server, is only permitted to be run on one
computer at a time. Bottom line, unlike Lion, legally
you cannot install the same copy on multiple
computers unless some "family pack" or site license
is purchased.
Yes, you need to purchase another copy.
The copy of Snow Leopard license is here:
http://images.apple.com/legal/sla/docs/macosx_snowleopard.pdf -
hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions. -
Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.
As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
Thinking about using Mac Mini's as desktops for 20 employee business. Pro's Vs. Con's
Thinking about using Mac Mini's as desktops for 20 employee business. Pro's Vs. Con's
Your best bet would be to buy a single 2012 MacMini Server model that you can use to manage the balance of the other machines. Either that or upgrade one of the MM's to OS X Yosemite Server . You can find information about the Server edition at:
https://www.apple.com/osx/server/
However I would STRONGLY recommend visiting your local Apple Store and ask to speak to their business specialist, they are trained to manage customer needs such as yours.
The major advantage of using Macs over any PC is the stability of OS X itself and the overall quality of support that you will never get with HP. -
Mac Pro using Mac Mini as Print Server
Hi all,
Mac Pro is wired to my network, Mac Mini is Airport connected.
I'd like to use Mac Mini as a Print Server without keyboard and mouse. I've installed OSXvnc-server on Mac Mini and Chicken of the VNC (CVNC) Client on Mac Pro.
Mac Pro's keyboard is azerty as was Mac Mini, it's impossible to loggin with Chicken of the VNC, password is not accepted, I connect an azerty keyboard to Mac Mini and I can loggin.
Typing on Mac Pro in Mac Mini TextEdit through CVNC give weird keyboard layout, not only azerty qwerty different layout.
In between my two Mac Mini there wasn't any problem using CVNC and the same server but Azerty Qwerty layout.
Is there any other solution to use Mac Mini as a print server ? What about using Desktop remote connection ?
Thanks,
Peloche,
MacPro 2.66, 6GB, 1TB; Mini G4, 1.45, 1GB; iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.7)Ah… right! That explains it.
So what model printers are they?
Ned,
Printers are HP Color LaserJet 2550L, HP Photosmart 8250 and Epson EPL-5900L.
I've changed the VNC Client from "Chicken of the VNC" to "VNCThing".
Now I can log in from Mac Pro using its Azerty Keyboard as Qwerty Keyboard.
Once logged in I've set Mac Mini Keyboard to "Extended (or Expanded ?) American" keyboard within System Preferences, with this option Mac Mini see the Mac Pro Keyboard as an Azerty layout...
I've connected two printers through USB2 Hub connected to Mac Mini and the third one direct onto Mac Mini USB port.
Back to Mac Pro "System Preferences Fax & Printers", "+", immediatly the 3 printers have been proposed, I've selected them and tested all: it works perfectly.
Mac Mini is set to "restart after power cut" and is connected for power onto a remoted control power distribution sockets, that means Mac Mini is starting and stopped when printers are powered on and off.
The sole small issue is that I can't find how to display Mac Mini GUI on Mac Pro at a better resolution than 1024 x 768.
Thanks for your time,
Peloche,
MacPro 2.66, 6GB, 1TB; Mini G4, 1.45, 1GB; iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.7) -
bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???
You can bypass the password and wipe the drive and return to the original facory installation if the seller included the orginal install DVDs with the Mac mini. If not you will need a retail version of Mac OS X. To boot from the Install DVD restart the mini, immediately slip in the DVD and press and hold the C key.
-
Why my 2006 mac mini does not receive updates
Why my Apple 2006 mac mini does not receive updates
To see if you are ready for 10.5, read:
https://discussions.apple.com/docs/DOC-2275
To see if you are ready for 10.6, read:
https://discussions.apple.com/docs/DOC-2455
To see if you are ready for 10.7, read:
https://discussions.apple.com/docs/DOC-2465 -
USING MAC MINI, IPHOTO PICTURES TRANSFER TO EXTERNAL HD
im using mac mini, how to transfer iphoto pictures to external hard drive?
Close iPhoto.
Use finder to copy your iPhoto Library to your external drive.
Hold down the option key while you start up iPhoto.
IPhoto will ask you to select a photo library. Point it to your library on the external drive.
Once you verify everything is working properly you can delete the iPhoto library from you internal drive if desired. -
Recording Cable TV Shows using Mac Mini
Hi:
does anyone know how to record cable tv shows using Mac Mini?
please discuss the hardware and software issues.
Munirmunirul wrote:
Hi:
does anyone know how to record cable tv shows using Mac Mini?
please discuss the hardware and software issues.
Munir
There are several possible ways, some depend on the type of Cable TV system you have. First I am going to assume you are an American. While Cable TV is available in other countries, for example here in the UK, it ***** so bad in the UK that you are unlikely to be using it here.
Now, with American Cable the first possible method has already been mentioned by others which is to use an analogue connection from your cable box to an Elgato EyeTV 250 (possibly discontinued). This is an analogue tuner for a Mac and will let your Mac record the signal. There is also the more expensive EyeTV 250Plus which includes a chip to do the conversion to MPEG2 and take the load off your Mac. This method will work whether your Cable box is analogue or digital.
If your Cable box uses "Clear QAM" then you could get the HDHomeRun box from Elgato. This not only will provide a direct digital signal with no loss of quality, but will also provide two tuners, and can be shared across your home network. There is also the EyeTV 500 see http://www.elgato.com/index.php?file=products_eyetv500 but this also may have been discontinued.
Finally, if your Cable box has a FireWire connection (and by law they have to give you the option of this) then you can connect the box via FireWire to your Mac and run software on your Mac. Again this will be a direct digital capture with no loss of quality. See the following two pages for information on how to do this.
http://www.ammesset.com/irecord/
http://project-tigershark.com/people/rob/blog/2007/01/14/cable-tv-mac-firewire-h d-pvr/
Note: I am in the UK and have no direct experience of any of the above, and can only gnash my teeth in frustration at how spoilt for choice US TV/Mac users are compared to the pathetic massively DRMed situation here in the UK.
Maybe you are looking for
-
S540: Video card got warm, case bent
I was working on a WebGL application, then my laptop (I assume it's the video card) got pretty warm. Temperature monitor said it got about 75 degrees Celsius, which should be fine. NOT! My laptop bent... the right front corner (with the little ThinkP
-
Hi, I am working on SSRS 2008 R2. My Colleague gave me one RDL. I have added it to my SSRS project on BIDS & Tried to Open by double-click on that RDL. I got a popup error saying "Failed to open report 'reports_List.rdl'. clicked on Details button
-
Having trouble with a push to phone app?
If you have ever seen this error messages "The requested URL '/CGI/Execute' was not found on the RomPager server." you are not alone. I had this problem recently writing a python script to push a simple raw file to a phone and in my searching I have
-
Thanks, I havenot used Oracle before I know that you could debug JSP in Visual Age for Java, but where could we debug jsp code, thanks, null
-
After upgrading to IOS7 I can't hear my music in the "Music" app either through my head phones or through my phone - I can hear it in YouTube and iTalk or videos that I view online... Does anyone know why??? Thanks.