Use macbook pro as external firewire cd drive to reformat iBookG4 with boot disk?

My cd drive has failed on my iBook. Can I use firewire to connect my iBook to my macbook pro and use the macbooks cd drive as an external bootable drive?
Thanks!

That's a good idea. You may be able to do that. Plug your iBook into your MacBook Pro using your firewire cable, start your MacBook Pro up (with the disk inside of the MacBook Pro's optical drive) while holding down the "T" key on your MacBook Pro's keyboard (make sure you get a large firewire icon on the MacBook Pro's display), start up your iBook while holding down the "Option" key until you get a screen displaying available boot drives. If all goes well, you should see your iBook's internal hard drive, your MacBook Pro's hard drive, and hopefully the disk in the MacBook Pro's optical drive. Use the arrow keys or trackpad on your iBook to select the drive you wish to boot from and if all works properly, your iBook should boot.

Similar Messages

How to wipe Macbook pro HD for selling (late 2012) (did not come with instal Disk)

I own a late 2012 macbook pro and looking to sell it
It is a 750 GB HD i7 8 GB ram 13.3 inch. 10.9.1 Maverick OSX
When i started it up (Don't know what version at the time) it was already preinstalled and didn't have a Software disc. So i'm searching through old post and they all say i must have a disc to reinstall the software disc (I never had one) after Wiping the HD.
Question is... Can i just wipe the HD and throw it in the box along with everything else it came with and put it on ebay? I don't care for saving files as there is barely anything on it.
Do i have to worry about logging out of google, aol, icloud, youtube etc?

Brayden-aka-bman wrote:
Do i have to worry about logging out of google, aol, icloud, youtube etc?
Apple What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US

How do I completely clear my macbook pro to sell it if it didn't come with any disks and will that erase microsoft office?

I would like to sell my macbook and I was wondering how to clear it as if it were new without erasing microsoft office and allowing the new owner to set it up without needing to be in an apple store.

Welcome to the Apple Support Communities
When you erase the disk, Office will be deleted.
1. Press Command, Option and R keys while your computer is starting.
2. Open Disk Utility, select Macintosh HD and erase the drive.
3. Install OS X

How do I start up an iMac G4 on an external Firewire hard drive using Tige?

How do I start up using Tiger from an external Firewire hard drive? I have a 1 GHz iMac G4 with 768 MB RAM. The hard drive failed last week. I don't want to buy and install a new hard drive for the iMac G4. I have access to an Intel based iBook and a brand new copy of OS X 10.5 (Tiger) which I can use to install the copy of Tiger on an external Firewire hard drive that I have that's not being used. What are the steps for installing Tiger on the external Firewire hard drive and then using that external drive as the startup disk for the iMac G4?

Hi
Attach the external firewire drive to the iBook, launch Disk Utility and erase the drive use Mac OS Extended as the format type. Insert the Installer Disk, restart the iBook and hold down the 'C' key. Progress through the usual setup assistant prompts until you get to the point where you select the destination disk. You should see the external firewire disk. Select this and carry on with the installation. When the install is done, restart the iBook and verify you can boot from the drive. You can proceed with the Setup Assistant and create the default User Admin account if you want, or you can quit, shut down the iBook and disconnect the drive.
Next attach the drive to your iMac, switch on your iMac. The mac should find for itself the first bootable system it 'senses'. It should boot thereafter. You could forego this and simply attach the drive, boot the iMac and hold down the alt key. This should bring up startup disk manager which should show any or all valid bootable systems. Select the one you want and click the right hand arrow.
Tony

Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

Firewire 800 is the fastest and most reliable. Also it's bootable if you hold the option key down on a wired or built in keyboard. Not bootable via Airport obviously or if Filevault is used.
It's only your first clone that's usually takes the longest, it's shorter when it updates as you only do the changes which you can control to keep a pure clone if you wish.
Most commonly used backup methods

I tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just del

i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high). please help!!
MacBook Pro, OS X Mountain Lion (10.8.2), iphoto '11, version 9.4.2

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.

How can i copy files from one external hard disk to another using macbook pro with retina display

How can i copy files from one external hard drive to another using macbook pro with retina display?

That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
Clinton

Emptying trash isn't freeing up any space on MacBook Pro or external drive. Time Machine is OFF.

Yesterday, while using Final Cut Pro X, I noticed the program/my computer was starting to run slow--and then I was totally caught off guard by a warning that my startup disk was full. I checked Storage and Finder and both my MacBook Pro and external drive had less than 1gb of space each! I usually use Secure Empty Trash and have no problems...but for my drives to be full, it clearly hasn't been working for a few days, possibly weeks.
I'm using a MacBook Pro (early 2011) and a LaCie Thunderbolt external drive. I'm running Mavericks (10.9.2)
I am not using Time Machine. When I look at Storage under About This Mac, my Backups on my MBP and LaCie drive are both at zero KB.
I read through the forums and tried going into Terminal and entering sudo rm -rf ~/.Trash ...but all that did was free up about 10gb on my external drive (I'd emptied upwards of 90gb from my trash).
Right now I'm basically stuck with a slow laptop and very little storage space, which has slowed my work to a halt. Does anyone know how to fix this?

Some space suggestions.
Disk Space - Free Up
Disk Space – Free Up (2)
Disk Space Filling Up – OmniDiskSweeper
Disk Space Filling Up - WhatSize

My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you

My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?

Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
Quit and you should be able to install OS X now with your Apple ID and password.
see
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

Can the apple external disc drive that I just got for my air also work with my late 2007 macbook pro? The internal disc drive broke after apple care expired, natch.

Can the apple external disc drive that I just got for my air also work with my late 2007 macbook pro? The internal disc drive broke after apple care expired, natch.

No, sorry. it won't work with the 2007 MBP. You can replace the optical drive yourself - just go shopping at OWC.
Good luck,
Clinton

Computer crash with iTunes - Using external firewire 800 drive

I am using an external firewire 800 drive (2TB Lacie) to store all my music for iTunes... At random times this crashes the computer, the music "skips" and the computer has a grey notice telling me to shutdown immediately. I am not sure why this is happening, but think this must be some sort of conflict issue... but no clue how to resolve... Any advice would be great!! Thanks!

Oh no, sounds like kernel panics. Time to head directly to The X Lab to read the FAQs and get started with maintenance and troubleshooting. Unfortunately, this problem goes way beyond iTunes, so for additional support, you should post in the appropriate OS X forum.

Can I use MacBook pro A1211 with external monitor, screen has died but

CCan I use MacBook pro A1211 with external monitor, screen has died but computer seems fine

Hmm seems like this model has DVI out. You could just plug a standard DVI monitor into that. Or use the DVI connector (VGA supported with included adapter; S-video and composite video supported with optional adapters) adapter that came w/ your machine.

EMac and FCE using an external firewire hard drive as a Scratch Disk

I am about to purchase a new hard drive for use with FCE as a scratch disc.
I am looking for people who are "actually" using an external firewire hard drive as a scratch disc with FCE on an eMac.
I am interested in the following info.
1. What Make, Model, size HD are you using?
2. What rpm speed and cache size?
3. Any problems? Crashed HD's? Working good?
4. Do you have any other firewire devices plugged into your eMac?
I blew up 3 eMacs last year. Apple could not figure it out or anyone else.
I was using a Lacie P3 250/8mb firewire drive as a scratch disc.
Thanks in advance.
eMac 1.25ghz/1gb RAM/160gb HD/Superdrive Mac OS X (10.3.9)

1. What Make, Model, size HD are you using?
I have two LaCie Porsche drives, one 160 GB and another 250 GB (more like 159 GB and 233 GB in actuality).
2. What rpm speed and cache size?
They're both 5400 RPM if memory serves me. The 160 drive has 2 MB cache and the 250 has 8 MB cache.
3. Any problems? Crashed HD's? Working good?
The 160 GB drive caused me some problems, but I'm chalking most of that up to a bad FireWire cable. LaCie replaced the cable for free, and I haven't had any significant problems.
4. Do you have any other firewire devices plugged into your eMac?
Since I've got a 15" PowerBook, I'm limited to 1 Firewire bus, so the two drives, a LaCie DVD burner, and my Sony Handicam are all daisy-chained together. Having the Handicam on the bus tends to slow things down, but I can certainly capture to the drives with no problems. If I'm doing a lot of editing, though, I'll unplug the camera to speed up the bus.
I use the 160 GB drive primarily for backup, storing finished projects, and storing stock footage. The 250 GB drive is used solely for video capture and render.
The only thing I might caution you with is that the LaCie Porsche drives are rather picky about how they get turned on and plugged into the FireWire bus. You need to plug the power in, turn them on, and THEN plug in FireWire -- it won't work if you have FireWire plugged in when you turn them on. It's not a big issue, as long as you're aware of it. (It could be that my PowerBook is a little wonky, too.)

Using an external firewire hard drive + interface at the same time?

Hi Guys,
It seems that the issues I am having with BFD2 not streaming properly might be to do with the slow USB transfer rate. (Thanks to everyone who has helped with this issue!)
So... I am thinking of getting an external firewire hard drive for my iMac.
Thing is, my audio interface also uses firewire (Mackie Onyx 1220)... can they share using a hub? Will one slow the other down? What if I also run another hard drive on firewire for my audio, will two FW drives and the audio interface all be able to share the one firewire port using a hub?
At the moment, all my drives have their own direct USB port, is going to shared firewire a step forward or a step backwards?
Cheers and thanks,
Mike

Gorwel Owen1 wrote:
On my G4 (roughly 30 % the power of your MBP)
Is this with an external drive and interface?
No Interface (yes, I use built in audio), but that shouldn't make a difference in CPU use.
I have four Internal drives. But that shouldn't make a difference either
That is very dependent on what you put on these tracks
I was thinking mainly about recording i.e. 8 simultaneous tracks whilst playing back up to about 16. I generally avoid plug-ins until mixing anyway. Sounds like I should be OK.
Absolutely.
but when logic overloads (when the CPU can't process audio in realtime anymore) Logic simply stops playback.
When I tried using a drive and interface on the same bus a few years ago I experienced minor glitching rather than stopping. Perhaps Logic has been improved in this respect.
P.S. How do you 'quote'in the forum?
Just above the field where you type replies in, there are 5 symbols - they are buttons.
The first three work on selected text (making it Bold, Italic and Underlined). The abc-tick is spell-checking and the " sign means Quote. When you click it, the message you reply to is inserted wherever your cursor is.
The preview tab lets you see how the message will look, giving an opportunity to edit. You cannot edit in preview mode though, just look. Only in Compose can you edit.

Use macbook pro as external firewire cd drive to reformat iBookG4 with boot disk?

Similar Messages

Maybe you are looking for