Use MacBook Pro as master and iMac as slave?

I have a mid-2007 iMac and a late 2013 MacBook Pro. I want to use the MacBook Pro as the storage unit and the iMac as the operating unit since the larger screen is easier on the eyes. How can easily connect them to transfer files back and forth easily?

So hard wiring the two machines is not a viable solution? The MBP can't be used as an external hard drive?
I've had problems saving files to the right machine so I email them to both. That's even a slower option.

Similar Messages

Using MacBook Pro as display and keyboard

Morning.
I have an Mac mini Server 2,53 10.6.4 without display and without keyboard. How can I use my MacBook Pro as display and keyboard to configure the server?

If you are setting up a server you can use Server Admin tools to set up a new server remotely. You would need to install the Server Admin tools on your MacBook Pro and then do the remote install procedure.
You need to collect the serial number and the Mac Address of the Mac Mini Server to enter in as the information in the Remote Install during the installation process you will be prompted to chose Remote Management and SSH for options that way you will be able to connect to the Server Remotely at anytime when configuring or afterwards.

Using Macbook Pro Retina with 2011 iMac

About to purchase a new Macbook Pro Retina and hope to use my existing 2011 iMac as an external display which I believe is possible with this model. If it is, which cable will I need? Thunderbolt?
Thanks

Here is the Target Display Mode information:
http://support.apple.com/kb/ht3924
http://support.apple.com/kb/PH14264
Note that a Thunderbolt port will act as a minidisplay port when required.
Ciao.

Using Macbook Pro as display and keyboard for a PC

I have a macbook pro, but I want to build a high end gaming pc eventually, but not only would i have to build the CPU, but I would also have to acquire a monitor and keyboard and all that jazz. It really cranks up a hefty price tag.
Then the thought occurred to me, that I already have a monitor and keyboard on my macbook. Wouldn't it be great if I could use my macbook in those capacities for the PC, basically reversing the flow of information from the miniDV port and the USB ports.
I highly doubt it's possible but I thought I would put the idea out there and maybe something would come of it in the future.

If you are setting up a server you can use Server Admin tools to set up a new server remotely. You would need to install the Server Admin tools on your MacBook Pro and then do the remote install procedure.
You need to collect the serial number and the Mac Address of the Mac Mini Server to enter in as the information in the Remote Install during the installation process you will be prompted to chose Remote Management and SSH for options that way you will be able to connect to the Server Remotely at anytime when configuring or afterwards.

I just bought a used macbook pro 15 unibody, and would love to know how to change it's name from "previous owner's macbook pro" to "my macbook pro". Any help would be greatly appreciated.

I need to know how to change the macbooks name to reflect new ownership. Thanks.

jeremyfromcanton wrote:
It did not come with the original discs, and I bought it for the fact that it came with certain programs already on it. I do have the snow leopard os disc I bought to update my older macbook, but don't want to lose those programs which I bought it for.
Then you need to obtain them from the seller. It is illegal (according to Apple) to sell Macs without the system discs that came with it.
You can get replacement System Discs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those -
http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
Mac OS X 10.6 Help: If you forget your administrator password

IPhoto cannot export video after installing Yosemite, HELP. It happens to my 2 MacBook Pros, 2 Airs and iMac.

iPhoto cannot export video after installing Yosemite.

You have a problem and yo need to solve it
If you want help you need to do more than state an abstract problem - we need details - what can't it? what makes you thing it can't? what errors occur? what are the symptoms?
Your post is like "my car won't start" - with no details it could be anything from having lost the key to gas - you have to provie details
LN

I have a used macbook pro and i cant update the apps bought on the first owners account and i need to update the apps

hi i hav a used macbook pro running mverics and i cant update the apps that were purchased by the preveous owner on a different itunes acount and i need to update the apps thanks

It appears as if the OS currently on that machine was not the original OS? If so, you are running into this problem because the seller did not do what he was supposed to do - he was supposed to erase the hard drive and reinstall the original OS. And, if he got either the OS or any apps at the app store, they are not transferable as they are tied to his Apple ID forever. That is why you will have to pay for them using your own Apple ID. And, if he obtained the current OS at the app store, you may also run into another problem: you may not be able to reinstall the OS if needed as that is tied to the original Apple ID as well.

Macbook Pro Color Profile and Calibration for Photo processing.

Hello Friends,
May be it has already discussed in many forums but somehow I got confused about different solutions of the questions and due to this asking once again here.
I am using Macbook pro of 2012 and there exist many color profiles in the Display settings.
I am a photographer who uses Photoshop for the editing as well as Canon Software.
To get the most accurate Monitor Calibration Should I use default "color LCD" profile ?
I am not using any External Calibration tool. I have manually calibrate the screen but somehow I am not 100% confident on that.
In that case should I go for default "color LCD" for my photo processing. I found some light yellow cast/warm color on that profile but I am not sure..
Any help/suggestion will be much appreciated.
I am using:- MacBook Pro + OS X Mountain Lion 10.8.5
Warm Regards,
Ari...

Which model MacBook Pro? [EDIT] my bad, didn't see it in your original post
You mentioned that there is no error message when you try to change the profile; something is probably being reported to console though. Open Console.app (in /Applications/Utilities/) and see if anything is reported to it while you're experiencing these problems. If so, please post it here and I'll take a look at it.
Are you using the default profile that came with the machine or did you create your own by using the Calibration Assistant?
You might try opening Color Sync Utility (in /Applications/Utilities/) and verify or repair (if necessary) your color profiles.
Hope this helps....
Dual 2.7GHz PowerPC G5 w/ 2.5 GB RAM; 17" MacBook Pro w/ 2 GB RAM - Mac OS X (10.4.6)

How Can i connect using Thunderbolt a Macbook Pro with the New iMac

I bought the new Macbook Pro with Thunderbolt and instead of buying a new external monitor, i am thinking that the new iMac with Thunderbolt is a great idea.
Is there a cable to connect the Macbook Pro and use as iMac as external monitor, using Thunderbolt.
thanks

I understood your question perfectly and the answer is absolutely yes. When you change the iMac into target display mode you underlying operating system continues to run all existing applications. For example in my case if I finished editing some video and am about to enter a lengthy render process or something which may draw lots of resources like hand real, I set it to start on the iMac and then switch it to target display mode to use it as a monitor with my MacBook air in the meantime.
Only one small caveat in your case though. Since the target display mode is a feature of OSX (eg the OS interprets the special key stroke and changes the iMac into target display mode) you should make sure Lion server supports the target display mode feature. I don't see a reason why it wouldn't but that's the only thing currently crossing my mind. Keep in mind the compatibilities between ports as noted in my blog. If any of your machines have mini display port and you intend to connect the new iMac in target display mode you will run into issues. In that special scenario, I recommend buying a refurb iMac from 2010 which urtilize the displayport allowing you to use it as a display for all your macs -- those with thunderbolt as well as those with displayport. If you have thunderbolts then definitely go with the thunderbolt iMac.

HT1420 I have 5 computers already authorized with my Apple ID. How can I add one more. My home has 1 IMAC, 2 Macbook Pros, 1 Ipad and 2 Iphones. Why are you now limiting me to five computers on my Apple ID when I am clearly an Apple product supporter.

I have six products in my home. I can only authorize five using my Apple ID. All my products are Apple - 1 IMAC, 2 MacBook Pros, 2 Iphones and 1 IPAD. This doesn't seem right - We are so Mac'd out in our home and yet we are now being limited to the number of products we can have using the same Apple ID. Any advice as to how to find a workable soliution to this?
Thanks

Authorise Only Applies to Computers... Not Devices...
You state you have 1 IMAC, 2 MacBook Pros, ... this = 3 Computers... you can Authorise up to 5 computers.
See Here for full details...
About authorization and deauthorization
For Devices...
See Here...
iTunes Store: Associating a device or computer to your Apple ID

HT5287 DVD and CD sharing will not let you play or share DVD movies and audio CD's. Does any one know of a way to get music from a CD on a MacBook Pro wirelessly to an iMac?

DVD and CD sharing will not let you play or share DVD movies and audio CD's. Does any one know of a way to get music from a CD on a MacBook Pro wirelessly to an iMac?

I cannot find the eMac install disk, and I haven't been able to get it to start up from my 10.3 CDRm (holding down option or c), though I read something somewhere about these not being able to start up from system folders earlier than those they shipped with. I've dealt with this sort of thing several times before, and it always seemed to work to simply use target disk mode.
It definitely won't start up fromt the 10.5 DVD-R, and I'm pretty sure I tried putting the MBP into TM to use its optical drive as well, but it didn't work. But it's worth trying again, and I appreciate your input greatly.

Using time machine backup from my Macbook pro to my new IMAC 27

Hi just tried to do a system restore of my time machine back up from my macbook pro to my new Imac 27, and the imac won't boot. Can I use a time machine back up to restore all of my data to my new Imac 27? Any help would be great thanks.
Antonio Medina

It sounds like you've overwritten the new computer's installation of OS X with one that is an earlier and incompatible version. You need to erase the new computer's hard drive then reinstall OS X using the original installation discs that came with the new computer. After you complete the installation you will have the opportunity to use Migration Assistant to migrate your Home folder, third-party applications and support files, and network preferences from an external drive, another connected computer, or an attached Time Machine backup drive.
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID, then click on the OK button. Click on the Partition button and wait until the process has completed.
4. After the above process has completed quit DU and return to the installer. Complete your OS X installation.
5. When the installation is completed the computer will restart into the Setup Assistant. When you arrive at the point of setting up an initial admin account DO NOT use the same user (short) name that you have been using on your old system. Choose a temporary name to use such as Test or Temp, for example. At the end of the setup you will have an opportunity to migrate data from your TM backup. You can then migrate the Home folder, applications, network preferences, etc. Just do not do a full system restore, again.
6. When the migration has completed open Accounts preferences. Click on the lock and authenticate. Click on the Account Options button (bottom of the sidebar with account listing.) Change the Automatic Login preferences to use your migrated account. Click on the OK button and restart the computer.
7. Your computer should restart into your old Home folder with all your data. Open Accounts preferences, click on the lock icon and authenticate, select the temporary account you created then click on the Delete [-] button to remove it. Select the last option (immediate removal) and click on the OK button.

I transferred about 400 gigs of data from my MacBook Pro to my new iMac using Migration Assistant, but it doesn't show on Finder. How can I locate my data?

I transferred about 400 gigs of data from my MacBook Pro to my new iMac using Migration Assistant, but can't find any of my data on Finder. I'm thinking that the data got transferred but not cataloged. Finder shows about 400 gigs of my hard drive being used, but the files it shows don't come anywhere close to 400 gigs. How can I find out what is really on the hard drive and how can I access my MacBook files I transferred?

I suggest that you start over, boot into Internet recovery mode, launch Disk Utility, erase and reformat the HD with one partition and GUID option, quit Disk Utility, restore the OS, and on first boot, use the Setup Assistant to migrate from the MacBook, following the steps in Pondini's Setup New Mac guide. If that doesn't solve your problem, contact Apple's Support. If they recommend the same steps, I'd opt to return the machine and get another (you can do that the first 14 days you own it, no questions asked).
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

I have a macbook pro early 2011, and I can't use AirPlay like it says I can. I do not have the "show mirror displays" or whatever. What the heck

I have a macbook pro early 2011, and I can't use AirPlay like it says I can. I do not have the "show mirror displays" or whatever. What the heck

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
iTunes- Troubleshooting AirPlay and AirPlay Mirroring
iTunes- Using AirPlay
Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Other solutions are the Air Parrot, StreamToMe, and AirServer.

How do I use my serial number to find information about my MacBook Pro's Processor and RAM?

So I want to find information about my MacBook Pro's processor and RAM using the serial number because the MacBook no longer works. I remember being able to find this information on the apple website before, maybe by using the coverage checker. Did they take this information out of the coverage checker? Is it no longer possible for a costumer to obtain this information?

Append the last three characters of it to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
This won't reveal how much RAM it currently has installed.
(117541)

Use MacBook Pro as master and iMac as slave?

Similar Messages

Maybe you are looking for