Use MacMini remotely without a screen attached to it

Hi
I want use the Mac Mini with no Screen attached to it.
But then, the Apple Remote Desktop don't work correctly.
I can connect via vncviewer to the Mini but I can't do anything (I only see the desktop).
When a screen is physically attached, vnc works without any problems.
Any ideas? I read some posts, that the only thing is to use a dummy screen connector. But I can't believe that's the only solution?!

When a mini is booted without a display attached, it should still have a desktop at at least two different resolution choices of 800 x 600 and 1024 x768. Not sure why you aren't seeing that. I suggest you search this forum on the term "headless" and see if you find some information to help you.

Similar Messages

  • How can I use my remote, without using Media Sourc

    I have an audigy2ZS Platinum Pro, and I hate the mediasource remote plugin, I was much happier with my Remote Center, that was on my Audigy Platinum.. Is there anyway to get remote center on this model, or do I have to use media source?

    Intelliremote is a software program that replaces the cumbersome Creative Remotecenter software that is bundled with Soundblaster Li've!, Audigy, Audigy ZS and, X-Fi. Creative had an excellent idea bundling an infrared remote control with their product...it's just to bad the software "RemoteCenter" is a 2MB behemoth that doesn't even do what you want it to do!
    http://melloware.com/products/intelliremotev2/

  • Use GET PERNR without any screen default from Logical DB.

    Could anyone help me how to avoid using screen default from logical DB if using GET PERNR?

    Are u saying using this logic below  , im can avoid using GET PERNR?
    TABLES: RP50G,PERNR,PYORGSCREEN,PYTIMESCREEN.
    DATA: IN_RGDIR LIKE PC261 OCCURS 0 WITH HEADER LINE,
          WA_RT LIKE PC207 OCCURS 0 WITH HEADER LINE,
          SEQNR LIKE PC261-SEQNR,
          RESULT TYPE PAY99_RESULT.
    DATA: M_START LIKE SY-DATUM,
          M_END LIKE SY-DATUM.
    FORM GET_PAYROLL USING P_PERNR M_START M_END.
    *This FM help us to get the Sequence number used for the
    *employee on the payroll.
      CALL FUNCTION 'CU_READ_RGDIR'
           EXPORTING
                PERSNR          = P_PERNR
           TABLES
                IN_RGDIR        = IN_RGDIR
           EXCEPTIONS
                NO_RECORD_FOUND = 1
                OTHERS          = 2.
    *We read it using two dates, which corresponds to the month *we need
      READ TABLE IN_RGDIR WITH KEY FPBEG = M_START
                                   FPEND = M_END.
      SEQNR = IN_RGDIR-SEQNR.
    *This FM actually reads the payroll and get the information
    *we need.
      CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
           EXPORTING
                CLUSTERID                    = 'XX'
    *In CLUSTERID use the country of your choice
                EMPLOYEENUMBER               = P_PERNR
                SEQUENCENUMBER               = SEQNR
                READ_ONLY_INTERNATIONAL      = 'X'
           CHANGING
                PAYROLL_RESULT               = RESULT
           EXCEPTIONS
                ILLEGAL_ISOCODE_OR_CLUSTERID = 1
                ERROR_GENERATING_IMPORT      = 2
                IMPORT_MISMATCH_ERROR        = 3
                SUBPOOL_DIR_FULL             = 4
                NO_READ_AUTHORITY            = 5
                NO_RECORD_FOUND              = 6
                VERSIONS_DO_NOT_MATCH        = 7
                OTHERS                       = 8.
    *We just need to read the result table.
      LOOP AT RESULT-INTER-RT INTO WA_RT.
        CASE WA_RT-LGART.
          WHEN '9010'.
             MOVE WA_RT-BETRG TO T_ANYTABLE-SOMEPAY.
        ENDCASE.
      ENDLOOP.
    ENDFORM.

  • Can I use iTunes Match on an ATV without a TV attached?

    I've got an Apple TV2 that I use for music-only playback, attached to my hifi (using Toslink output, with nothing connected to the HDMI output). It works well with airplay and home sharing, but I'd like to use iTunes Match (airplay from an ios device seems susceptible to glitches, and the Mac with the iTunes library on it is normally suspended if I'm not working).
    However, I can't see a way to control playback from iTunes Match without a screen attached. The Apple Remote app lets me play music using home sharing, but you can't really access the menu portion without a tv attached to the ATV2 to see what's happening.

    Hi,
    i'm just following this thread and have the same problem as the first poster.
    I would love to go to my IPAD with ICloud match enabled and listen to music, but on a proper AV-Receiver system without having a cable attached to the IPAD  and WITHOUT turning the TV on and WITHOUT running my laptop all the time.
    If i understood this correctly, there are 2 options:
    1.) buy the Airport Express and connect it the to the AV-Receiver and use Airplay.
    2.) buy the new Apple TV 2 and enable/sync it with ITunes Match.
    As far as i understood the main difference is, that on option 1 with Airport Express, the music is still downloaded to my IPAD (16 GB) and then using Airplay to stream it via the Airport Express to my AV-receiver. .  So i have to cleanup space after listening to music, otherwise i might run out of space some day....
    Also there is another drawback of this method, the battery consumption, because the IPAD streams all the time while listening to music.
    Using Itunes Match on Apple TV 2 doesn't download the songs to the ATV 2 , but streams it, because it has no HD capacities..The IPAD is working as a Remote using the latest "Apple Remote App".
    This would not consume any battery on the IPAD, since the music process is running on the ATV 2.
    As far as i can see, it is possible with the latest firmware of ATV2 and latest IOS enabled.
    However, i din't manage to find a statement of how the remote App looks like. All the youtube videos i found show the IPAD/Iphone,/IPOD actually remote controlling the ATV2 software on the TV screen. 
    Open the Remote app on your device (in this case iPhone). Select the Apple TV you want to use iTunes Match with. You'll see a number of icons in the bottom of the screen. The music related ones (Playlists, Genres, Artists, Albums etc) show your iTunes Match library. If you start playing one of these, it will be streamed from iTunes to your Apple TV. No need for a computer with iTunes to be on.
    When i open the Remote App on my IPAD i only get a selection of "enable home sharing" or "add media library". I can't find the Apple TV icon or any icons in the bottom of the screen. Only these 2.
    I guess, this is just because i don't have an ATV 2 yet.
    Does the Remote App show a screen like my music library on my IPAD ? With all the nice album art etc. ?
    If not, i would rather go with option 1 with all the drawbacks of space, battery, etc...
    Please reply, if any of you has made any experience with it.
    Thanks for beeing patient, but i need to know which streaming device i should by.
    levian71

  • Lombard without a screen

    Does anyone know if a Lombard can be used without a screen attached, only with a seperate screen? When I get home, I think I will try to get my second Lombard running even though it has no screen. I am going to attach an external monitor.

    Got a HD caddy and a new set of screws from Powerbook Medic. Installed a 6Gb drive out of other Lombard. System boots easily with external monitor. (Command F1 to change screens) Odd thing.. System showed failed L2 before but now it shows good? Probably in the process of failing. Anyhow, the Lombard will work fine without a screen, but finding the right keystroke was simply luck. Now the decision is whether to get a MacBook or MacBook Pro. Probably get the Macbook since it is physically smaller. I am not going to be doing things that need the extra juice of the Pro.

  • How to use Apple TV with Logitech Harmony remote WITHOUT having to unpair?

    I have a Logitech Harmony 880 remote which I am trying to set up with my new Apple TV.
    Within the Logitech software I set up Apple TV as a MediaCenter PC device.
    I've followed these instructions already.
    http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/8480
    The Harmony remote works great with the Apple TV if I follow these instructions to unpair the remote EVERY time I want to use it. Once I turn the TV off or switch to another activity, it loses this setting and I have to unpair again when I go back to Apple TV.
    I would like to be able to use my Harmony Remote without having to unpair constantly.
    I have tried to pair the Apple TV with the Harmony remote. This only served to render my Apple Remote nonfunctional and I still have to unpair every time.
    I tried to use the Harmony remote's IR learning mode directly with my Apple Remote instead of using the settings from the database. I still have to unpair every time.
    I tried to go into the Apple TV > Settings > General > Remote and have Apple TV learn my remote's IR. There are instructions to hold down each button until a progress bar is full. The first button is the up arrow. The progress bar never activates when I push the up arrow on my Logitech Harmony remote although I know the Apple TV is somewhat recognizing the button press because I hear an auditory beep and see the led light on the front of the Apple TV flash when I push the button. None of the arrow buttons of the Harmony remote would activate the on screen progress bar although some buttons such as the Volume buttons would.
    At this point, I resigned myself to having to unpair every time I accessed my Apple TV so I thought I would get smart and program the unpair button to show up as one of the additional buttons on the lcd screen of the Harmony Remote when I start the Apple TV activity. I'm sure by now you can see where this is going. My attempts to outsmart my advanced technological devices failed dismally as it seems the unpair option of the Harmony remote will only function correctly if I first press the Devices button and then choose the Apple TV.
    I was wondering if anyone had gotten a Logitech Harmony remote to work successfully with the new Apple TV without having to use the unpair command every time and if so, what did you do to resolve this issue?

    I'm having the same issue except that I set up the Apple TV as a Media PC on my Harmony 770 and that gave me the unpair addition button that actually works. Per your idea, I've been using that to gain functionality of my Apple TV 3 from the Harmony remote.
    However that's just a workaround. I've gone a step further and learned the raw commands and it still won't work. This makes me think the issue is on the Apple TV refusing to recognize the remote unless you press "unpair" everytime.
    Is anyone else having this issue on the current Apple TV 3 firmware?

  • Can I remote control Apple TV without TV screen ever ?

    Hi,
    all answers I found weren't that clear.
    Can I configure & control the AppleTV remotely without using a screen ever ?
    Actually, I only want to use it as a mp3 player and I need to control it using:
    - mobile phones (iphone but android too)
    - OSX
    - windows (optional)
    Is it possible ?
    If the answer is yes: I'm about to buy it right now
    Thanks for your answer.
    Julien

    vazandrew wrote:
    Apple TV is a media streamer, meant to be connected to a TV. At the very least you will need a monitor to set up the device. If you are connected to speakers via optical you can then choose to stream Music while TV is off.
    If you are simply looking for a way to stream audio, and never intend to use video, then an airport express is a better option.
    Ok but I'd have to have a computer for streaming that.
    Too bad there is no solution like that with an hard drive for storing music content on it.

  • Will it feasable to use Module in this case :screen shot attached

    Hi ,
    We are developing a Application which provides several facilities like Forum , Remote User , --- etc screen shot attached for this reference .
    Please tell me will it feasable to develop each of this service as a Module ??
    Please tell me shall we go for seperate Modules or for Seperate Components , what will be feasable
    Please share your experience

    Anybody please tell me if its better to go using Modules Approach , in case if they were part of the Application itself .
    Thanks.

  • Mac mini unresponsive without screen attached.

    hi there,
    i am using the mac mini 2011 server headless without a screen.
    over time the system gets unresponsive and the finder doesnt let me open new windows.
    asap i attach a screen again its fine.
    system.log all filled up almost from all active apps:
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayDepth: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenDepth: error getting display depth (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetCurrentDisplayMode: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: Bad colorspace number 127
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayDepth: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenDepth: error getting display depth (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetCurrentDisplayMode: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: Bad colorspace number 127
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayDepth: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenDepth: error getting display depth (1001)
    Mar 16 10:46:20 nexfw002 Finder[223]: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x04241fd4
    Mar 16 10:46:20 nexfw002 Finder[223]: _NXGetScreenRect: error getting display bounds (1001)

    Good evening,
    I made some progress!
    First of all I found out that the screen on ARD seems not to be the "real" screen. What does this mean? It seems that the "true" resolution is somewhat higher than the resolution shown in ARD. I recognized this, when I changed the resolution via ARD to the max resolution possible (1280xsomething). Suddenly I could see some open finder-windows in the down-left part of the screen which I was able to move into the centre. However, I was not able to close them, because when I took the finger from the mouse, the window jumped again into the corner. It seemed to me that the mac still thought to have the High-Res Thunderbolt display connected.
    Ok, so far, so good. I set up a new admin user, logged-off from the current one (was not able to untick the box that the windows should re-appear next time, since this box was also in the left corner) and started the new one. Then back to the old one. And suddenly all the open windows reappeared in the right dimension of the ARD screen and I was able to shut them.
    Furthermore, since 24 hours no more errors in the log.
    Best regards,
    Jens

  • How do I get content from my iPad to show up on the tv screen using Apple TV without going thru iTunes?

    How can I get content from my iPad and my air book to show up on the tv screen using Apple TV, without going thru iTunes?

    You will need to use AirPlay to see that.
    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • HT1947 Does anyone else have my problem with atv3? Plays films in iTunes without any problems but on music every time I use the remote app on my iPhone 3GS it stops playing after around 5 tracks in. Anyone having this problem?

    Does anyone share my problem with atv3 I can play films through iTunes without any problems. When I start playing music using the remote app on my iPhone 3GS after around 5 tracks in it just stops playing and seems to lose my connection. Hoping this is human error on my part?

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • HT1595 Trying to connect my new apple tv to the wireless network. When I try to use the remote, the Apple TV doesn't respond (doesn't go to the next screen). Could this be caused by a weak wireless signal?

    Trying to connect my new Apple TV to the wireless network. When I try to use the remote the Apple Tv doesn't respond ( doesn't go to the next screen). Could this be caused by a weak wireless signal?

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • Grey out screen Fields after entering input using F4 help without an enter code

    Hi Experts,
    We have a requirement where we want the Input field on a dialog box screen to be greyed Out as soon as the user enters an
    input in the respective field using F4 help without processing an ok code in PAI .
    Hence we want to achieve a secured input feature that prevents user from altering the values coming from check table.
    Regards
    Kunal

    Hello Kunal,
    Try below code, it works for me.
    TABLES : MARA.
    DATA: BEGIN OF IT_MARA OCCURS 0,
    MATNR LIKE MARA-MATNR,
    END OF IT_MARA.
    DATA : IT_RETURN TYPE STANDARD TABLE OF DDSHRETVAL WITH HEADER LINE.
    PARAMETERS: p_matnr LIKE mara-matnr.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_matnr.
      SELECT MATNR FROM MARA UP TO 10 ROWS INTO TABLE IT_MARA.
      SORT IT_MARA BY MATNR.
      DELETE ADJACENT DUPLICATES FROM IT_MARA COMPARING MATNR.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          RETFIELD      = 'MATNR'
          DYNPPROG      = SY-REPID
          DYNPNR        = '1000'
          DYNPROFIELD    = 'P_MATNR'
          VALUE_ORG      = 'S'
        TABLES
          VALUE_TAB      = IT_MARA
          RETURN_TAB    = IT_RETURN
        EXCEPTIONS
          PARAMETER_ERROR = 1
          NO_VALUES_FOUND = 2
          OTHERS        = 3.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      LOOP AT SCREEN.
        IF SCREEN-NAME EQ 'P_MATNR'.
        SCREEN-INPUT = '0'.
        MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    Regards,
    Thanga

  • No audio when with second monitor attached and using Extend, Duplicate,​or Second Screen Only modes

    When I attached a second monitor via HDMI cable and try to use Duplicate, Extend, or Second Screen only display modes, I can get the video to display and run but I get no audio unless I set the notebook display settings to P/C Only mode.  I really want to use the second screen for PowerPoint/Presenter View and play a embedded video (along with the sound).  Even if I try to play a YouTube video I can only get audio when in P/C Screen Only mode.  Any assistance would be greatly appreciated.  Thank you.
    This question was solved.
    View Solution.

    Hi,
    Please disable HDMI sound to force audio back to the laptop or use different conection such as VGA or DVI. To diable HDMI sound, please right click speaker icon > playback devices > right click and disable HDMI sound.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hi there , i use microsoft remote desktop to connect to my work pc - on my 21.5 mac the remote screen is half the size of my screen and i cant get it to be full screen - is this possible or am i just stupid ? many thanks

    Hi there , i use microsoft remote desktop to connect to my work pc - on my 21.5 mac the remote screen is half the size of my screen and i cant get it to be full screen - is this possible or am i just stupid ? many thanks

    What setting have you chosen in the view menu? Fit to Screen or Window.
    And, in Preferences what have you set for Display?

Maybe you are looking for