Use material determination to substitute more than one material

Dear,
I want to use material determination to swap for a list of material based on some rules. Is it possible? I understand standard SAP only allows you to swap for only one materail based on ATP check. Please help.
Points will be rewarded.
Thanks

Dylan,
mat determination uses condition techniques so you will need to create (done in IMG):
1. create field catalog (if needed)
2. create condition table
3. create access sequence
4. assign condition tables to access sequence
5. create condition types
6. assign access sequence to conditon types
7. create determination procedure and assign to condition type
8. assign determination procedure document type
9. create condition record ( VB11) -you'll be able to enter all the material u want to swap here
hope this helps
reward if helpful
Wu

Similar Messages

  • Can we use same program ID for more than one RFC scenarios

    Hi experts,
                I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
    data: iquote type standard table of ZIQMD initial size 0,
          IPRODUCT type standard table of ZPMS initial size 0,
          wa_quote type ZIQMD,
          wa_PRODUCT type ZPMS.
    CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
      TABLES
        I_QUOTE       = iquote          .
    CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
    'ID4'
      TABLES
        I_QUOTE       = iquote          .
      COMMIT WORK.
    CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
      TABLES
        IPRODUCT       = IPRODUCT          .
    CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
    'ID4'
      TABLES
        IPRODUCT       = IPRODUCT          .
        COMMIT WORK.
    when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER'  , but iam not getting data  for 'Z_CBT_RFC_PRODUCTMASTER'  interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
                  Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
    Thanks in advance.
    Thanks & Regards,
    Poorna.

    Just tried this and I can confirm that my earlier understanding was correct!
    One of my colleagues confused me out and the conclusion is,
    1. You need a separate TCP IP Connection for every interface with a Unique program ID.
    Regards
    Bhavesh

  • How can I use my iPod nano on more than one computer?

    How can I use my iPod nano on more than one computer?

    Hi, China6450.
    Thank you for visiting Apple Support Communities.
    I would recommend setting up Manually manage music.  This will only allow music to be synced from the computer to the iPod nano.  Here are some helpful articles that will walk you through the process. 
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/HT1535
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/HT1202
    Cheers,
    Jason H. 

  • Can i use my icloud account on more than one iphone.  I would like to find my iphone or wipe all of my iphones from one account

    I want to be able to use find my iphone or wipe all of my iphones from one account.

    Yes- See  Using Apple  ID  on  more than one device
    (870)

  • Using a ommand to generate more than one row of data in utl file

    Hi Guys
    This might be a pretty long one. But I require help with regards to using outer and inner loops within my code.
    Here is the task:
    Each account involved with the DCA Allocation has an entry in the DCAACCOUNTALLOCATION table to track its progress. The STATUS value of the entry shows the position of the account in the DCA Allocation process.
    The status entry being tested is 3.
    Below is the code:
    create or replace
    PROCEDURE DCA_BMW_OUT
    IS
    -- Declare all variables as reference
    v_out_file UTL_FILE.FILE_TYPE;
    v_row_Count NUMBER;
    r_bmw NUMBER;
    v_out_directory all_directories.directory_path%type;
    v_out_filehandle UTL_FILE.FILE_TYPE := NULL;
    v_out_buffer varchar2 (32767);
    v_records NUMBER;
    body_output varchar2(32759 BYTE);
    dictionary_guarantorsexist varchar2 (1 Char);
    -- Text required within this part of the procedure
    v_body varchar2(32767 BYTE);
    v_header VARCHAR2(32759 BYTE);
    BEGIN
    FOR r_bmw IN
    ( SELECT *
    FROM dcaadditionaldata
    WHERE directory_name IS NOT NULL
    ) LOOP
    BEGIN
    -- Output file to be added into the directory specified
    v_out_file := utl_file.fopen (r_bmw.directory_name, 'DCAExport_1_' || TRIM(TO_CHAR(SYSDATE,'DDMMYYYY_HH24MISS')) || '.txt', 'W');
    -- The Header data which will be outputted to the file
    v_header := 'KennzeichenBrgschaftsforderungGesamtforderung|Währung|Übergabedatum|DifferenzierungAnwalts-oderInkassofall|MainMarktpartnernummer|
    MainAnrede|MainTitel|MainName|MainVorname|MainStraße|MainHausnummer|MainPLZ|MainOrt|MainLand|MainGeburtsdatum|MainTelefonnr.Schuldner|G1Marktpartnernummer
    G1Anrede      G1Titel      G1Name      G1Vorname      G1Straße      G1Hausnummer      G1PLZ      G1Ort      G1Land      G1Geburtsdatum      G1Telefonnr.Schuldner      G2Marktpartnernummer      G2Anrede      G2Titel
    G2Name|G2Vorname|G2Straße|G2Hausnummer|G2PLZ|G2Ort|G2Land|G2Geburtsdatum|G2Telefonnr.Schuldner|G3Marktpartnernummer|G3Anrede|G3Titel|G3Name|G3Vorname|
    G3Straße|G3Hausnummer|G3PLZ|G3Ort|G3Land|G3Geburtsdatum|G3Telefonnr.Schuldner|G4Marktpartnernummer|G4Anrede|G4Titel|G4Name|G4Vorname|G4Straße|G4Hausnummer|
    G4PLZ|G4Ort|G4Land|G4Geburtsdatum|G4Telefonnr Schuldner|G5Marktpartnernummer|G5Anrede|G5Titel|G5Name|G5Vorname|G5Straße|G5Hausnummer|G5PLZ|G5Ort|G5Land|
    G5Geburtsdatum|G5Telefonnr.Schuldner|Kundennr.|Bestandsnr.|Finanzierungsnr.|KennzeichenFinanzierung/Leasing|Kennzeichenprivat/gewerblich|
    reguläresVertragsende|Laufzeit|Vertragsdatum|Vertragsstatus|Ratenbetrag|Filiale/Gebiet|Finanzierungstyp|BankverbindungKonto|BankverbindungBLZ|
    RSVKennzeichen|Kündigungsdatum|Modell|Fahrgestellnummer|KFZKennzeichen|KFZZulassungsdatum|CoD1Marktpartnernummer|CoD1Anrede|CoD1Titel|CoD1Name|
    CoD1Vorname|CoD1Straße|CoD1Hausnummer|CoD1PLZ|CoD1Ort|CoD1Land|CoD1Geburtsdatum|CoD1Telefonnr.Schuldner|CoD2Marktpartnernummer|CoD2Anrede|CoD2Titel|
    CoD2Name|CoD2Vorname|CoD2Straße|CoD2Hausnummer|CoD2PLZ|CoD2Ort|CoD2Land|CoD2Geburtsdatum|CoD2Telefonnr.Schuldner|CoD3Marktpartnernummer|CoD3Anrede|
    CoD3Titel|CoD3Name|CoD3Vorname|CoD3Straße|CoD3Hausnummer|CoD3PLZ|CoD3Ort|CoD3Land|CoD3Geburtsdatum|CoD3Telefonnr.Schuldner|CoD4Marktpartnernummer|
    CoD4Anrede|CoD4Titel|CoD4Name|CoD4Vorname|CoD4Straße|CoD4Hausnummer|CoD4PLZ|CoD4Ort|CoD4Land|CoD4Geburtsdatum|CoD4Telefonnr.Schuldner|
    CoD5Marktpartnernummer|CoD5Anrede|CoD5Titel|CoD5Name|CoD5Vorname|CoD5Straße|CoD5Hausnummer|CoD5PLZ|CoD5Ort|CoD5Land|CoD5Geburtsdatum|
    CoD5Telefonnr.Schuldner Y|Y|5830,99|EUR|20/08/2009|DCA|4|123456|Herr||Mueller|Rainer|Messigasse|33|84432|Filz|Deutschland|01/07/1957|08912345|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345|||||||||||||||||||||||||||||||||||||||||||||||||76543|5000234567||Lease|Privat|12/12/2013|60|12/12/2008||250,50|US|Rate|1234567890|32343450|N||BMW 320 i|W34567890PA34567|M-H-3456|09/12/2008||||||||||||||||||||||||
    N|450,80|EUR|20/08/2009|DCA|4|987654|Frau||Meier|Heide|Beinstr.|44|86353|Laus|Deutschland|03/06/1949|08987654|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||87654||8765675585|Loan|Gewerblich|14/03/2012|72|14/03/2006||500,01|DF|Select|976579657|32343450|N||BMW 500 sl|W94567890PA34568|M-H-3457|10/03/2006|34343434|Herr|Dipl|Meier|Rudolf|Heislestr.|69|85433|Maus|Deutschland|28/05/1945|08934567|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345
    Y|33970,50|EUR|20/08/2009|Lawyer|4|64646464|Frau||Schmidt|Susanne|Hueftgasse|55|89363|Maus|Deutschland|23/08/1933|08934567|34343434|Herr|Dipl|Meier|Rudolf|Heislestr.|69|85433|Maus|Deutschland|28/05/1945|08934567|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345|||||||||||||||||||||||||||||||||||||98757|5000785675||Lease|Privat|11/11/2009|48|11/11/2005||380,70|GH|Zielrate|234567899|32343450|Y||BMW 380 s|W54567890PA34569|M-H-3458|07/11/2005||||||||||||||||||||||||
    N|10040,20|EUR|20/08/2009|Lawyer|4|4865465|Herr||Schulz|Karl|Nasenweg|77|83354|Schuh|Deutschland|18/01/1965|08972545|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||46789|50004765787||Lease|Privat|16/09/2012|60|16/09/2007||1234,56|OS|ZUS|98765432|32343450|Y||BMW 280 i|W74567890PA34570|M-H-3459|12/09/2007||||||||||||||||||||||||';
    utl_file.PUT_LINE(v_out_file,v_header,TRUE);
    -- Below will output a row of data which satisfy the requirements.
    FOR body_output IN
    ( SELECT
    AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
    AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
    AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
    FROM AccountDetails
    JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
    WHERE EXISTS
    ( SELECT *
    FROM Dcaaccountallocation
    JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
    WHERE Dcaaccountallocation.dcaid = 41
    AND Dcaaccountallocation.status = 3
    AND DebtEpisodes.DCASentDate IS NULL
    AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
    AND DebtEpisodes.DCAORLAWYER = 'DCA'
    LOOP
    UTL_FILE.PUT_LINE (v_out_file,
    body_output.CUSTOMERNUMBER|| '|' || body_output.ACCOUNTNUMBER|| '|' ||body_output.CDTITLE|| '||' ||body_output.CDFIRSTNAME || '|||||' ||
    body_output.CDLASTNAME|| '||||' || body_output.ACCOUNTTYPE|| '|' ||body_output.ORIGINALCONTRACTENDDATE|| '||||' ||body_output.CONTRACTTERM || '|||||' ||
    body_output.CONTRACTENDDATE|| '|' || body_output.BRANCHAREA|| '||' ||body_output.PRODUCTTYPE|| '||' ||
    body_output.HOUSEBANKACCOUNT|| '|||' || body_output.CARMODEL|| '||||' ||body_output.CARLICENCE|| '|' ||
    body_output.ARREARSBALANCE|| '||||' || body_output.CODEBTOR|| '|' ||body_output.GUARANTORnumber);
    END LOOP;
    UTL_FILE.fclose (v_out_file);
    EXCEPTION
    WHEN OTHERS THEN
    UTL_FILE.put_line (v_out_file, 'failed');
    -- If any errors occur when closing the file, then we close the opened file.
    IF utl_file.is_open(v_out_file) THEN
    UTL_FILE.fclose (v_out_file);
    END IF;
    END;
    UPDATE DebtEpisodes
    SET handoverdate = null
    WHERE DCAORLAWYER = 'DCA'
    AND accountid IN
    ( SELECT accountid
    FROM Dcaaccountallocation
    WHERE Dcaaccountallocation.status = 3
    AND Dcaaccountallocation.dcaid = 41
    END LOOP;
    END DCA_BMW_OUT;
    Currently, the above codes issue is that although many rows of data have been inputted in all the tables, with regards to the select criteria above (in italics), it only produces one row of data when i expect more than one to appear.
    If the query only outputs one row but you're expecting it to produce more than one row, then you need to dissect the statement to find out where the output is being unduly restricted
    I was told maybe an outerloop or an inner loop would do the trick, but really stuck on how and where to put it.
    Hope this makes sense guys and I would really appreciate your time.
    Thanks

    if i run this particular code
    ( SELECT
    AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
    AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
    AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
    FROM AccountDetails
    JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
    WHERE EXISTS
    ( SELECT *
    FROM Dcaaccountallocation
    JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
    WHERE Dcaaccountallocation.dcaid = 41
    AND Dcaaccountallocation.status = 2
    AND DebtEpisodes.DCASentDate IS NULL
    AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
    AND DebtEpisodes.DCAORLAWYER = 'DCA'
    This returns 1 row of data
    However if i run a small part of the above code...
    SELECT *
    FROM Dcaaccountallocation
    JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
    WHERE Dcaaccountallocation.dcaid = 41
    AND Dcaaccountallocation.status = 2
    It returns a lot of rows with a status of 2
    Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
    :(

  • Can I use the redemption code for more than one machine for Photoshop Elements?

    I want to use the Photoshop Elements that I bought on more than one machine. Is that
    possible using the Redemption Code? It says it was used with another Adobe ID.
    Thanks

    Hi Stover,
    Typically you use the redemption code to retrieve your serial number for Elements products. The licensing for Elements allows the owner to install on two of their computers.
    See these for reference:
    Redemption Code Help
    How many computers can I install Photoshop Elements on?
    Hope that helps,
    - Dave

  • Use of same iTune for more than one iPod

    I need to find out whether I can use the same itune in one computer for more than one iPod nano and one iPod video?

    I looked at the article, but it doesn't help me know how once I have downloaded onto a nano, for example, the itunes knows that the next thing I connect is something different. My son hooked up his 20GB ipod last night after updating his sister's nano and now the itunes thinks his ipod is a nano. How do I get the itunes to recognize his ipod as the 20GB it is?

  • Using creative cloud programs in more than one computer

    Can we install all the programs in more than one computer with creative cloud with the same monthly cost?

    Yes, you can use Creative Cloud desktop applications on two computers at once, regardless of operating system, for the individual associated with the Creative Cloud membership. See the product license agreements page for more information

  • Can I use a magic trackpad with more than one Mac at a time?

    I am attempting to pair a MTP with a second MacBook Pro.  So far I can't get system preferences to find the MTP.
    I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
    The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac.  To do this, you first remove the existing pairing and then pair the trackpad again'.
    Can anyone advise, please?
    If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
    Thanks

    Yes, your keyboard, mouse or trackpad can be paired with multiple Macs.  You can even have multiple keyboards, mice or trackpads paired with one Mac.  The caveat is that the device can only be connected to one Mac at a time.  The device can't be paired or connected with a Mac while it's currently connected to another.
    Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other.  The device will connect with the first available paired Mac and then unavailable to the second.   If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on.   I do this with a keyboard from my iMac to a Mac Mini in another room.
    Captfred

  • How to use left outer join on more than one table (source)

    Hi all,
    In our project we are converting the Unix shell & SQL scripts into OWB mappings. We are facing problem converting left outer join in OWB. here is one of the example. i have just pasted the FROM and where condition.
    FROM ym_scr t1, branch_finmonth t3
    LEFT OUTER JOIN item_image t2
    ON (t1.branch_no = t2.branch_no
    AND t1.item_no = t2.item_no
    AND t3.to_date between t2.tran_dt and t2.to_dt
    AND t2.to_dt >= '$start_images' ) <<<========= '$start_images' THIS COMES FROM THE UNIX VARAIBLE ,
    We converts the same when we are putting it in OWB join Operator
    INGRP1.branch_no = INGRP2.branch_no(+)
    AND INGRP1.item_no = INGRP2.item_no(+)
    AND INGRP3.to_date between t2.tran_dt and t2.to_dt
    AND INGRP2.to_dt >= INGRP2.start_images
    But as you see in the OWB opreator we can put left join with INGRP1 with INGRP2.
    We can not make same join with INGRP3 & INGRP4 , becoz it failed saying "you cannot left outer join on more than one table/source".
    so overall this OWB code makes incomplete left outer join as per the above ANSI SQL join in Oracle.
    Bcoz of the problem we are getting less number of rows...........
    SO please please help me on this
    Regards
    Ashok

    Hi.
    I know this topic is here for a while now, but I had the same problem today, searched for help and didn´t find anything.
    Later I figured out how to do this.
    You just have to put the (+) one time, and the OWB converts in an LEFT OUTER JOIN statement.
    For this case, all you have to do is:
    ( INGRP1.branch_no = INGRP2.branch_no(+) AND INGRP1.item_no = INGRP2.item_no AND INGRP2.to_dt >= INGRP2.start_images )
    Regards,
    Godoy

  • There is a way to use the button enhance for more than one photo at a time?

    I have more than a thousand photos to edit,  this can help a lot.

    This might help:
    http://www.feroxsoft.com/ibe/index.php.en
    Regards
    TD

  • How to use "URLConnection" in sessions with more than one screen??

    Hi,
    Requests can be sent to http servers using "URLConnection" objects. The responses can be parsed via their InputStream; so far so good...
    Question is:
    What can I do when I want to send a request to a server where there is first a log-in screen and only then there is the desired screen where the real request should be sent?
    Since the REAL request cannot be directly sent without the authentication check first, I need some kind of "context" or session in which I may make some consequent actions... Sending an independent request using a diferent URLConnection just won't do since I'm unauthorized via the second connection!!
    Generally, I need a way to send consequent requests where the second request may be sent only if the first request authenticated me...
    How can I do that? (Hope my question is clear...)
    --Amir.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Well, you will have to deal with the cookies or however the server knows you are authenticated. Personally I prefer to use something like Apache HttpClient rather than dealing with icky details like that on my own.

  • How can I use the RMS.vi over more than one period?

    Hi everyone,
    I am using the Cycle average and RMS.VI to get the RMS value of a alternative voltage (2kHz). To acquire this signal I am using a differentiel AI of a 6225 card (at 250kS/s) and the RMS value is correct, it works fine. However from what I have understood, this VI calculates the RMS value according to only one period no matter how many samples I have acquired (2000 samples in the VI I have attached). Is this correct? If so, is ithere a way to use it over all of the 2000 samples to get a more averaged value? Or does another VI exist?
    I could repeat several time an acquisition of a short number of samples (a period) and make an average but it would take some time and I have to do this with 39 other Inputs on the same card one after the other...
    Thank you for your help,
    User
    Attachments:
    Forum.vi ‏76 KB

    User_1979 wrote:
    ....could you tell me if this VI sends a rms value of X compleat periods (even if I have send X periods and a half for example)?
    It gives the RMS value of only the newest set of data.
    The RMS and RMS Pt. By Pt. work for me, but it depends on how you break out that Dynamic Data from the Express VI, which was why I suggested you didn't use it - mainly because you can't tell what happens to that data when you wire it to a function and it coerces. Actually, I should say, I can't tell what happens to it. You may know, but I don't.  
    In the attached screenshot, I have "made" a 2k sine wave with an amplitude of 5. The indicators show RMS value.
    Richard
    Attachments:
    rms.gif ‏14 KB

  • Using Portable Home Directories with more than one client

    Hi, I've got a general question about Portable Home Directories (PHD) that I'm hoping someone with more experience can help me with. I've only ever tied used PHDs to tie a Network Home to a single laptop in the past. But now I'd like to sync the home directories of a user that uses both an iMac (in the office) and a MacBook Air (on the road).
    Any caveats to watch out for if we do this?
    What if the user is logged into both machines at the same time?
    What if the home directory on the iMac is larger than the entire SSD on the MacBook?
    Appreciate any advice before heading down this path…

    well... my english is not so good but i will try to explain it to you...
    iTunes have a funcion that put the music in the iPod automaticaly and it will put the music of THAT computer in your iPod.
    so when you conect your iPod go to options and select put the music manually or something like that (i have it in spanish XD)
    or go to the "help" in iTunes > "help iTunes" then... charge iPod > charge iPod manually
    this is dificult to explain in english im from argentina XD i hope you understand me XD

  • HT204053 how do i use an apple id on more than one device

    i recently purchased the ipad mini. i also own the iphone 5.  when i signed in with an apple id i used the one i use for my iphone and when i am downloading things to my ipad they are automatically going on the phone how can i stop that?

    On the iPhone go to Settings > iTunes and App Stores and set the options under Automatic Downloads to OFF.

Maybe you are looking for