Use messaging multiplexor to redirect to non-sun imap/pop3 servers?

Can the Messaging Multiplexor be used to redirect an IMAP/POP user to a non-Sun messaging server? For example, could we use the multiplexor to establish a single server name for IMAP/POP3 clients, but have the multiplexor redirect specific users to an MS Exchange back-end over IMAP/POP3? We will have identical usernames and passwords on the Sun Directory Server and in Active Directory.
Thanks much!
Craig

It can be done. You will need to "provision" all your users in LDAP, just as you would for Messaging Server. Put the Exchange box in as "mailhost".
Then, you will need to have MMP know what commands Exchange offers, so you can restrict MMP to showing just that subset of the protocol. Check the MMP doc for how to do that.

Similar Messages

Sun One Instant Messaging Multiplexor

I have instaled the Sun One Instant Messaging in a Windows 2000 server with service pack 4, few days passed when sudenly the service start to fail because of the multiplexor service unexpectedly terminiation. The event log shows this information:
date: date
time: time
Type: Error
User: N/A
Computer: Server
Source: Service Control Manager
Category: None
Event ID: 7031
Description: The Sun ONE Instant Messaging Multiplexor service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
I hope someone could help me and tell why is this happening,

Do you hgave a multiplexor log file (mux.log)? What happens if you start the multiplexor by hand? Here is how:
stop the multiplexor, start the server, then from the promt:
cd <installdir>
cd bin
multiplexor -c <installdir>/config/iim.conf

How can I use Messages app on non-Verizon phone?

Hi. I have two phones: A VZW personal phone and a T-Mobile phone from my employer. I wish to carry only one device when I'm at work (my T-Mobile work phone) but I wish to be able to get texts from my personal VZW number on that phone. I know I can't forward texts, so I installed the Verizon Messages Android app on my work phone, but I can't set it up with my VZW number (I figured it should work because I was able set it up on my tablet at home and it works fine there).
After I install the app on the non-Verizon phone, I open it and I get a screen asking me if I want to use the app for my default messaging app. If I click no, the app closes without giving me a chance to set it up with my personal account like it did when I installed it on my tablet.
I also noticed after I installed it, it's called Messages+ instead of Messages. Are they the same thing?

Hi, has this been resolved? I am in a very similar situation and need the app to work on my new Sprint LG G3 exactly the way it operated on my Sprint iPhone 5S. Here is how it worked on my Sprint iPhone: downloaded the VZ Messages app, followed the prompts to tie it into my work Verizon Galaxy S5 number, and started to receive texts sent to my S5 on my iPhone but in the separate VZ Messages app and not in the native iPhone messages app.
But when I install the VZ Messages app on my Sprint LG G3, it only asks if I want to "Change default message app? Use Message+ instead of Messaging as your default message application?" That is not what I want so I tap "Cancel" and the app closes. I am not prompted with the opportunity to tie it to my Verizon S5 number like I was on the iPhone. The ability to have the VZ Messages app on my Sprint LG G3 along side the native G3 messaging app, the exact same way it worked on my Sprint iPhone, is very important and the whole reason I switched from AT&T to Verizon for my work phone.

Invoice Posting using INVOIC02 Idoc for PO and Non-Po based invoices

Hi All,
We have a problem regarding posting Invoices using Idocs.
We have po and non-po invoices coming frm thirdparty in the form of idoc files.
We need a clarification whether Invoic02 idoc can handle both Po and Non Po Based invoices or threre are seperate idoc types or message types for Po and Non Po Invoices.
Could any one give some inputs on Partner Profiles also for this senario.
Please kindly reply as early as possible.
Regards
Anil Kumar K

Hi
I Got your name from this site.I would be very thankful if you can help me here.I am designing a EDI based invoice LIV.Is it possible to post some charges which are without PO reference but are coming in Vendor Invoices.Is it possible to post these kind of charges with EDI message INOIC01 or we have to post through FI posting.If possible through EDI in which segment of IDOC we will enter these charges with amt.Also is it possible to post credit memo also with EDI
Thanks
Sanjeev

I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps

How can I use MESSAGE function in forms 6i

Hello
I have an err_msg table that store collections of application message on utf8 database in one language not in english
I have selected data from the err_msg table and put on variable .I want to display the message on the variable using MESSAGE function(MESSAGE(variable)).Unfortunately what i have seen on message dialog box is replaced characters like rectangles .
What should I do please?

Hi,
We have the same problem in our project . In this case we are upgrading from an older version of forms (3.0) to 6i. The UE worked fine in the older version, but now we get a NON ORACLE ERROR. Our DLL is written in MS-VC++ project.
We'd like to know whether , besides the common version and platform, you have also written the DLL using MS-VC++ ; otherwise please tell us .
Regards,

How to use messages to android phones

how to use messages to other android phones

To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Using "messaging.system.queueParallelism.maxReceivers"

Hi Experts,
Happy New Year 2012!!!
I am working in a landscape where there are integrations between 'CRM to MDM' and 'MDM to Non SAP Systems' using PI. There is a lot of data which flows through these interfaces and some times the PI MDM adapter clogs up and it stops both inbound and outbound data flow.
To address this issue we have been suggested to use "messaging.system.queueParallelism.maxReceivers" : Note - 1136790.
I was trying to collect some information on this but could only see scenarios using JDBC receivers. Hence i have a few questions to ask:
1.) Is this note only applicable to JDBC receiver scenarios? If yes, then can you please give a back ground as to why?
2.) If No, then how should i configure this in my PI system?
3.) How can i tag a particular scenario to this property? This is mentioned as a 2nd point in the note solution section but the steps are not given.
Thanks in advance,
Anshul

Dear Supriya,
Thanks for your inputs. I have a few more questions to ask to further drill down this configuration:
2.) If No, then how should i configure this in my PI system?
--> You can configure this parameter in NWA for messaging system property.
Anshul -> Since i do not have access to NWA, can you please give the hierarchy path in NWA to reach messaging system property. Here do i have an option to mention 1 or 2 particular scenario where i want to restrict the number of parallel worker threads being used on the inbound adapter. This question is basically to understand how this configuration works. This restricts the number of parallel worker threads, so how it will work if i dont tag it to a scenario. What if i have 3 CRM to MDM scenarios with equal amount of loads happening at a single instance.
Does this configuration implies to one single instance of an adapter or it affects all the instances.
Is there a way i can test, how affectively this configuration is working to improve my PI system performance?
Warm Regards,
Anshul

When I use messaging there are only two users who automatically go green (MMS?), and are undeliverable. I can't seem to change this. What am I doing wrong?

When I use messaging there are only two users who automatically go green (MMS?), and are undeliverable. I can't seem to change this. What am I doing wrong?

I use message and all other messages are non-sms. When I try to message these two accounts, they automatically use sms, everything I do is the same. The non-sms messages go through just fine (including pictures). The sms messages (no pictures) are always rejected; they have never gone through. They have never been able to send messages to me either (although they can send to others). I have a Verizon cellular data plan.

PI 7.11: Cannot connect to server using message server:...

Hello Guys,
we make the Application Management for a Customer PI System.
Scenario:
- the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
- WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
Problem:
Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
"Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
In the Details from the Error Message:
"<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
Sorry for my bad English
Best Regards,
Markus

Hi Markus,
did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented. There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
(This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
Solution: Establish a connection without any proxy in between.
E.g.: a terminal server in the same network
It would be helpful to find more people with the same problem to force a fix from SAP for that.
If anyone else is having problems with this, please add a comment to this thread.
Best regards
Christian

Using Messages with Multiple Users and Multiple Computers

I have two users who share two different computers, switching between them during the day.
I'd like to use messages on them for us to send text messages in the office, however, it asks them on logging in (most, but not everytime) to re-enter their apple id password. It seems that using icloud for messages among multiple computers like this isn't good. its like it wants each computers to be linked with a particular user, and doesn't like it that the users are moving around from computer to computer
Options to avoid this nuisance?
1. Would bonjour messaging work, and then just remove the icloud account from messages?
2. How about setting up the message server on my ML Server, would that avoid this problem?

I'd say probably make sure that in the advanced tab under edit>preferences you should make sure they both point to the same file.
My turn now, how to i post a thread, there's no button.

I am trying to pair my cell phone and tablet using Messages App, but only MMS messages will come through on my tablet. I've tried pairing and unpaired, reinstalling app on my tablet, and can't figure it out. Any idea how to fix this?

I am trying to pair my cell phone and tablet using Messages App, but only MMS messages will come through on my tablet. I've tried pairing and unpaired, reinstalling app on my tablet, and can't figure it out. Any idea how to fix this?
Thanks

I Shared my most ridiculous situation but didn t log under your problem.
sorry, I gave you your answer under sunshine99 or Dianna. I want out and you want in.
if you not find just email me at [removed]
thanks
Personal information removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

How can i use messages on windows

im trying to use my imessage on my laptop is there like a software that doesnt require jailbreak to send messages on the laptop?

ryan10132 wrote:
how can I use messages on windows
You can't.

Use messaging multiplexor to redirect to non-sun imap/pop3 servers?

Similar Messages

Maybe you are looking for