Use MF60 for split the components needs in a horizon of several days

Hi to all,
I'm working in my Industry to migrate the SAP system from a Repetitive mode to a Discrete one, and trying to launch the use of KanBan and MF60 usage, I'm not doing fine.
I want to launch MF60 usage, through the bases of using it to distribute the need of components reserve in a Process Order (or several) in a daily frequency.
I know it is possible to use the pull-list to propose only the replenishment quantity to be used in a time horizon given, for all Process Orders that uses "these" components.
I ask for guidelines, as I don't know if I need to start building Kan Ban signals through PK transactions, or if I need to reconfigure some Material Master Views, as for the moment I'm not able to split the need as it is only proposing me the overall need of the order, even though I have already upload Resources, Master Recipes and Schedules to obtain a distribution in the Process Order lifetime.
From what I know, the desire view to work on is the MF60 "Staging type: WM release order parts".
I'll appreciate any information, or documentation you can share
Regards,
David P

Hi Almeida and thanks for the response.
I'll try to explain myself in a practical way.
Now that it has being upload the Master Data in terms of resources and master recipes to work on a SAP Discrete mode, then I am working on the replenishment of components of the BOM's that are "signed" at the Process Order creation.
My current situation in an example will be: If I create a Process Order for a 7-day duration, it makes the components reserves for the total, nevertheless I want to configure "somewhere"-"somehow" in SAP to be able to use the MF60 transaction to distribute the needs in a given horizon.
With the scenario I have now, if I run the MF60 transaction for "that" order, no matter the horizon, it propose me the replenishment of the total need of the components minus the product already consumed. And even more, I only can run the MF60 with the "SLoc Level" view, and I have notice the distribution I need should be viewed under the "WM RelOrd. Parts" which is giving me a blank data result.
What will be my desire usage of the MF60, is to use it to propose me the needed components inside the given horizon, so if I give a 1-day horizon, and expect to get the components quantity for that day.
I hope, my issue is more clear now
Thanks
David P

Similar Messages

I used to be able to email photos from my Lightroom software quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoi

I used to be able to email photos from my Lightroom software 5.7 for MAC quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
I have been trying to get help from Adobe for 3 days. I have sent a message through "Get Support", 2 days ago, but no one has contacted me. I have tried by phone, but no one will help me. When I purchased Lightroom in May, 2014, I was able to receive phone help. I am now told that I don't qualify because I am not a Creative Cloud customer. I have been assigned a case number 186291729.
PLEASE HELP ME FIX THIS PROBLEM

I, too, have this problem. I see no one is responding with a solution? Hello? Can someone please advise?
Oh, and, yes, I have manually verified repeatedly that the information I gave to Lightroom is correct, and I still get the same error message when I try to validate.

When iam using jdownloader for dowload, the firefox did not work at any page, as like there in no internet conexion?

When iam using jdownloader for dowload, the firefox did not work at any page, as like`` there in no internet conexion?``

you need to check whether '''jdownloader''' is compatible with the Firefox version you are using.
-> Tap ALT key or press F10 to show the Menu Bar
-> go to Tools Menu -> Add-ons -> Extension section -> check the Status of '''jdownloader''' extension -> if '''an update''' is available for this add-on then install the update -> Restart Firefox and check again check the compatibility -> if it is '''GREYED with Exclamation mark''' then it is incompatible with Firefox
Try using this extension to force compatibility.
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Check and tell if its working.

Show Error string for all the components in a form at a time

How do I show all the error strings for all the components in the form when the submit button is clicked?

This code answers your question:
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.events.ValidationResultEvent;
      import mx.validators.ZipCodeValidator;
      import flash.events.MouseEvent;
      public var v:ZipCodeValidator = new ZipCodeValidator();
      public var vResult:ValidationResultEvent;
      public function performValidation():void {
        v.domain = "US or Canada";
        v.listener=myZip;
        vResult = v.validate(myZip.text);
        if (vResult.type==ValidationResultEvent.INVALID) {
          myZip.dispatchEvent(new MouseEvent(MouseEvent.MOUSE_OUT));
          myZip.dispatchEvent(new MouseEvent(MouseEvent.MOUSE_OVER));
    ]]>
</mx:Script>
<mx:TextInput id="myZip"/>
<mx:Button label="Submit" click="performValidation();"/>
</mx:Application>
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
http://www.stardustsystems.com/blog
Adobe Flex Development and Support Services

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem?

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]

How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover

How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover.Please help I just deleted all doubles did allmy artwork Etc..

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

Print Booklet won't let me because of multiple page sizes, even if I am using A4 for all the pages

Booklet won't let me because of multiple page sizes, even if I am using A4 for all the pages, this is the error message:
"The active document uses multiple page sizes Print Booklet works only with documents that use a consistent page size."
I am using Indesign CS6 (patches are up to date)
thank you
Cecilia

Do you already see this when starting the Print Booklet dialog or later when finally putting out? If you can see the dialog windows, will the preview show all pages in same size?

How to use parallel sequence for split the operation qty. urgent or other o

PP guru
My scenario is as follows.
I ve one material supposexyz.
For that material I' ve created bom, routing.
In routing I' ve mention only one operation. 0010.
Now I' ve the production order of 1000 kg.
I want to use two work centers to run this production order. ( e.g.work center a and b)
In routing I used work center a.
In short I want split that operation.
So what I ve to do or use parallel sequence and how???
or else is there any other option to split the order to two or more machines/work center?
Pls explain me in brief.
Regards,
Ram

Hi,
If you want to carry the production with two different work centers , first you need to split the operation qty.
For this in the order type dependent parameters OPL8
in the controlling tab page enable the indicator Cost collector
and set the default rule as PP2.
Create a Product cost collector with KKF6N.
   Now in the production order , select the operation and choose functions--->>> split.
   Now enter the operation split quantity and execute.
   Now in MD04 you can see two production order.
   In the second production order change the work center in the operation overview as desired and save.
Regards,
nandha

Do we have any third party FLEX component libraries to support accessibility feature for all the components(like: ViewStack, ToggleButtonBar, charts and etc..) ?

I am working on FLEX 4.6 SDK it provides 35 components with built in accessibility support. My Application contains some components which have no built in accessibility support but I need to provide accessibility support for those components too. I have gone through the Flex docs to customize the non accessible components to support accessibility feature, But the docs where not clear. To customize a single component I have to overwrite lot of code in SDK level.
and it takes lot of effort.
So, I would like to use FLEX component libraries which provides accessibility support for all the component.
Could you please guide me how can I provide accessibility support for other components with out putting more effort on it.
Thanks in advance...

There is already such thing in myfaces called "security context" [1]. You could find build of sandbox.jar [2]
[1] http://myfaces.apache.org/sandbox/securityContext.html
[2] http://people.apache.org/builds/myfaces/nightly/

Using JCom for getting the user name

I am using jcom610-win.exe and weblogic610sp2_win.exe .I need to use the Jcom for getting the user name of the NT Iser Logged in.I have got the process for this on the page at http://e-docs.bea.com/wls/docs61/jcomreference/Security.html .But this page uses a method isCallerAuthenticated() from a class file called jcom .I looked into the whole bea directory but there was no class like in the server dir.Can you tell where to get this class from.And if this has not been provided into the jar files that come along with the installable then why is it mentioned in the page @ http://e-docs.bea.com/wls/docs61/jcomreference/Security.html

Hi.
You might have better luck posting this in teh jcom newsgroup.
Regards,
Michael
Manoj Gupta wrote:
I am using jcom610-win.exe and weblogic610sp2_win.exe .I need to use the Jcom for getting the user name of the NT Iser Logged in.I have got the process for this on the page at http://e-docs.bea.com/wls/docs61/jcomreference/Security.html .But this page uses a method isCallerAuthenticated() from a class file called jcom .I looked into the whole bea directory but there was no class like in the server dir.Can you tell where to get this class from.And if this has not been provided into the jar files that come along with the installable then why is it mentioned in the page @ http://e-docs.bea.com/wls/docs61/jcomreference/Security.html
Michael Young
Developer Relations Engineer
BEA Support

Function Module /BAPI for changing the components in Production order

Hi,
We are in ECC5.0. We have requirement wherein we want to change /delete the existing component of the production order and add new component through RFC call from an external system. We tried to use CO_XT_COMPONENT_ADD FM for adding new components and when we tested this FM in SM37 with data there were no error messages . When we checked the Production order ,no changes were made to the production order component. Tried to use Commit statement and there is no change in the system behavior.Can some one help me to understand the system behavior . If possible kindly suggest me some alternate FM/BAPI .
With regards,
Joseph Anand B

Dear,
Please check this link,
ADD COMPONENTS TO PRODUCTION ORDER
Regards,
R.Brahmankar

Facetime able to use personal hotspot as the wifi needed?

I have a Verizon iPhone 4. Although the personal hotspot works for providing wifi to my nearby iPad or a friends iPhone nearby, it does not appear that my phone, which generates wifi with it's hotspot recognizes it's own wifi and so is unable to use facetime. Facetime works fine using another wifi connection (home or hotel). Is my conclusion accurate? Is the self wifi generated by the personal hotspot not accesable by the phone generating it to enable facetime?

The problem is, for the 5 devices connected to the "personal hotspot" their internet connection is via wifi, so they meet the requirements for facetime. On your iPhone, the one creating the hotspot, our internet connection is via cellular data, which doesn't meet the requirements for facetime. Now, if you get your buddy to create a hotspot using his iPhone, you could use his connection and use face time as well.
Keep in mind that the reason for the wifi requirement is due to the volume of traffic that facetime transmits. You will be hard pressed to have enough bandwidth over a personal hotspot connection from an iPhone to sustain the traffic needed for facetime. I would expect that the carriers might soon press Apple to change the connection check to impose a certain bandwidth minimum before facetime can be used to prevent people from trying what you are describing, then having nothing but problems due to the limited connectivity speeds. Trying to "game the system" and having problems will cause plenty of people to complain when it doesn't work they way they want it to.

How to use iMessage for all the iOS devices registered on one apple ID

I have 5 iOS device for my family on my appleID. But I want have different ID to use iMessage for all devices. Is it possible? How?

Sign in with whatever Apple ID desired on the device in iMessage setup.
This has no affect on the Apple ID used for store purchases or iCloud.

FM for splitting the date

Hi Everyone,
I need an FM to split the Date into days , month and year...
can anyone help me out.
Points will be rewarded.
Regards,
Syed

Hi Syed,
When we can do something with the code you can write the code. Since the sy-datum is anyhow stored in YYYYMMDD format you can split it by writing a small piece of code like this :
data :
w_day type i,
w_month type i,
w_year type i.
w_day = sy-datum+6(2).
w_month = sy-datum+4(2).
w_year = sy-datum(4).
write :/ 'Day    : ', w_day,
       / 'Month : ', w_month,
       / 'Year    : ', w_year.
Regards,
Swapna.
Edited by: NagaSwapna Thota on Jul 8, 2008 11:07 AM

When I use airplay for watch the movie in TV trough apple TV I want to see the movie only in TV not in my macbook, What should I do ?

Hi ,
Please help me what shoid I do watch the movie only in TV (not both of them macbook and TV) when I use airplay ?

Do not use Mirroring, simply AirPlay the content to the ATV.

Use MF60 for split the components needs in a horizon of several days

Similar Messages

Maybe you are looking for