Use my two internet connections at the same time

I have two internet connections via AirPort, and one another via Ethernet.
Can I assign which applications use the connection using AirPort and other
Ethernet connection?

Probably the EASIST way is to buy a router that does this for you. There are several on the market that can 'gang' two connections, then allow clients to use both together.
No doubt there would be a way to do internally, but to be honest, I'd have no idea where to even tell you to start, but I bet it involves the Terminal.

Similar Messages

  • Using two internet connections at the same time

    Is there a way to setup my Mac to see both a wireless and a wired internet connection, so I can combine the speed of the the connections? If not within the computer, is there a way to do it some other way?

    Hi
    You can have two connections on your machine one wireless one ethernet but you cannot combine the two for a greater connection , you need to use one or the other you cannot use both at the same time as one connection

  • Phone call and internet connection at the same time?

    Is the iPhone 3G supposed to be able to connect through 3G or Edge at the same time a voice phone call is on?
    I can do that with Windows Mobile phones, using my SIM card. But I seem not to be able to do it with my iPhone.
    Is this a limitation of the iPhone 3G?
    Would that be enabled with a future firmware?
    Thanks for a pointer.
    Dan

    If you are in a 3G area, you can use data at the same time as a call. If you are in an Edge area, you can do one or the other. The SIM card has nothing to do with how this works.

  • Using two network connections at the same time?

    Dears,
    I have two available Internet connections:
    1- a DSL connection which I'm connected with AirPort to,
    2- and a 3G USB modem connection (Huawei E156G if you need to know) which I setup through Network Preferences.
    Can I specify anywhere which connection an application should use at a given time, or all the time?
    For instance,
    a- Safari and Mail should use exclusively (or at first try) the AirPort connection,
    b- and iGetter (for faster downloads) should use the 3G connection
    Let me point out that I setup the 3G modem in Network Preferences (and that's the way I connect to it).
    By the way, if someone has trouble (which I had) setting up the Huwaei E156G on Snow Leopard, I can help.
    Thanks in advance for any help.
    Abdelaziz

    By default, the top-most service in the Network preferences gets the internet connection. All internet related traffic is sent on that interface.
    As far as using both for internet at same time, I'm not sure how to do that. You might search for setting up routes. Routes in the network tell it to send certain things to a certain interface, but I don't know how to differentiate a download from web surfing, etc.
    You might also want to try posting that question on the [Unix|http://discussions.apple.com/forum.jspa?forumID=735] forum.
    Message was edited by: Barney-15E

  • Connect two internet lines on the same cisco router 3945 series

    i have two internet lines from the same provider and i have one router i want to connect the two lines in the same router
    any ideas !!!!!!!!!!!!!

    Hi,
    No problem, similar treatment. Follow 
    1. Create IP SLA/Track for both internet link
    2. Break your LAN subnet into 2 smaller subnet
    3. Create route map, Match with 1 subnet & route the traffic towards 1st internet link
    route-map General_Internet_Traffic permit 10
    match ip address 115
    set ip next-hop verify-availability 10.1.1.1 track 1
    set ip next-hop verify-availability 11.1.1.1 track 2
    4. Create route map, Match with 2 subnet & route the traffic towards 2nd internet link
    5. Configure NATing/PATing over the interface, selecting by route-map 
    ip nat inside source route-map General_Internet_Traffic interface FastEthernet0/0 overload
    - Ashok

  • Can I use both Wifi and a Lan connection at the same time?

    With me back in the dorms I have been limited to a slower connection than what I would like. Now we are able to use both Wifi and a Lan line so I was wondering to somewhat "double" my speed if there was any way to use both connections at the same time.
    Now I know that you can have both plugged in at the same time, I guess what I'm asking is, is there a way that I could set programs to use one or the other? Or some kind of virtual desktop that is set to use the other connection or anything that would allow both be used at the same time.
    Or am I just wishing for something that doesn't have any possible way to work?
    -nathan
    MacBook pro 2.16 C2D 2gb ram   Mac OS X (10.4.8)  

    You can use both at the same time, but not gor Internet access if that's what you're asking.
    Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
    Sorry.

  • Currently I have two iPads connected to the same Apple ID and one connected to Game Center. I want to connect the second iPad to Game Center so that I do not lose my progress on apps like Clash of Clans.

    Currently I have two iPads connected to the same apple iPad. One is connected to game center(iPad air) one the other(iPad 2) is not connected to Game Center. How can I connect the iPad 2 Clash of Clan progress to game center when I already have another clash from iPad air connected?

    You cannot transfer content between two accounts. The sooner you make the conversion, the better. Just pick the new one and start using it(buying music etc).
    *A lot of people open new accounts when their email changes or they have a new email. You can just access your apple id account and change the primary email that you use to log in along with other details.

  • Can't i use xml schema and oledb data connection at the same time?

    Hello to all and thanks in advance.I use xml schema and oledb data connection at the same time and the problem is that when I try to export the xml, the outcome is not what i expect.Without the oledb connection everything is ok (just the schema) and the xml complies with the schema.
    Can't i have both schema and oledb and the exported xml be as i want it?

    You can use both at the same time, but not gor Internet access if that's what you're asking.
    Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
    Sorry.

  • Use more than one transition in the same time between two video clips?

    Dear Premiere Pro programmers,
    Could you please create a way to use more than one transition in the same time between two video clips without exporting to media, or creating new sequence, or using another layer (adjustment or transparent)?
    Message was edited by: Kevin Monahan
    Reason: Next time, create a more descriptive title.

    Hi Aqsa Nori,
    I'm not sure what you are imagining, but it might be possible to achieve by key framing effects. Can you tell us what you want to do? Also, please feel free to file a feature request: http://adobe.ly/feature_request
    Thanks,
    Kevin

  • Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

    Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

    The iPad has a micro-SIM card slot - nothing special or unique about it.
    The iPad is not sold as carrier locked.

  • Can I turn off the wireless and use the wired connections at the same time?

    Can I turn off the wireless and use the wired connections at the same time?
    This is to avoid transmission when I work without the need for wireless

    Yes, you can. Just open the web interface of the router. On your browser type the IP address of your router, usually http://192.168.1.1 go to wireless tab and disable it.

  • 2 network connections at the same time

    I have 2 network connections at the same time. One for network shares and one for internet. How can I decide which connection should be used for which service?

    David684,
    Thanks for posting all of this.  I have a similar network question with a very similar setup that I am using with two interfaces. However, I am much less comfortable with the command line than you appear to be (although comfortable enough to crib little tweaks from the web and run them).
    The real difference is the resources I'm after and it seems like more of a problem. In my case, I'm running my home wireless network and can connect at decent speeds, but I happen to live right across from campus where I am attending grad school and I'm picking up the school wifi network. Having direct access to this network, among other things, allows me to access library research journals and databases from home without constantly needing to authenticate. But it isn't nearly enough to accomodate all of my network needs. The key difference, then, is the fact that these come in the form of websites. But I want to access only library stuff over that we-fi connection and do everything else from the LAN.  I use an app called papers for research, which has a built in web browser to allow me to pull up articles and then save them. Would that help me by allowing me to have just that program use wi-fi? I am not sure if the app is using an embedded safari session or it's own home-rolled browser, or how to check in the first place (OR if that makes a difference as far as being able to route the app's traffic to that interface). Also, with all of that said, how could I find out the subnets over which to route this if what I'm going after is a far less tangible resource than an SMB share? I am guessing I need a different method or that none exist?
    Thanks

  • How to sync with two computers not at the same time, I'm registerd with one computer

    How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
    Where do I find my Sync Key ? so I can install manually if it works ?

    Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
    https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

  • Control two different parameters at the same time

    Two motors were connected each other rigidly. One motor controlled torque and the other motor controlled speed. I generated some torque and speed data which represented one cycle of motion from a motor simulation. I like to send these two different data sets (torque and speed) to two different motors at the same time. Torque data sends to one motor and speed data sends to the other motor to see the response of the load profile. In order to do this, I thought about using multithread, but I am not sure it will work for this application. Usually multithreading delay the CPU time so the overall control process might be delayed, right? If you have better idea, please let me know.

    If you are using one motion controller to control both motors, you will probably run into problems if you try to use multithreading on the PC. However, you can execute up to 10 programs (threads) at a time, in addition to host communication, using on-board programming. For more information on on-board programming please refer to the following tutorial: Developer Zone Tutorial: On-board Programming in FlexMotion
    Best wishes!
    Dawna P.
    Applications Engineer
    National Instruments

  • Wired and Wifi has to be connected at the same time to not be disconnected!

    I work as a tester for WoW and for the past few months, I’ve had connection issues. I’ve had Comcast come out a few times and they are so eager to leave they look up the speed and say, “Oh you are good on speed” well I’m not. Every few mins I’m disconnected from the server. It’s not my computer and I’ve done every thing WoW suggested. The ONLY way I’m able to stay online for an hour is I have to have the wired and WiFi connected at the same time on my desktop. If you have any suggestions let me know.

    I have posted this many, many times here. See if this helps you understand how this process works with regard to system sounds and screen rotation lock.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

Maybe you are looking for