Use native ArchLinux within VirtualBox - X Server Problems

Hi everyone!
I followed the Wiki Entry here:
https://wiki.archlinux.org/index.php/Vi … ical_Drive
to use the natively installed Arch within a VirtualBox on Win 7.
So far, I can boot into Archlinux - but the XServer cannot start, because there are some Errors, that the XServer failed to load the NVIDIA Modules.
The Wiki entry also mentions this kind of Problem and suggests a solution to use a second xorg.conf for usage with the VirtualBox.
But right now I do not really have an idea how to load an individual xorg.conf?
And how this xorg.conf should look to use the VirtualBox graphics card?
ArchLinux is installed on a Notebook with a NVIDIA Quadro NVS 3100M and I'm using the proprietary NVIDIA drivers (if I boot natively in Arch, which works fine).
Also I would be grateful for any other solution, if someone has successfully started a natively installed Arch in VirtualBox and has the proprietary NVIDIA driver installed.
Thanks in advance!
Kind regards
PhiGamma

Hello everyone!
There was a NVIDIA specific xorg config file I forgot which was needed for brightness control. I renamed the file and then it was possible to start the X-Server within VirtualBox. But there seems to be a problem with the VirtualBox 3d support and the NVIDIA drivers (eventually due to libgl?). I switched to Nouveau then and everything works fine. I can use 3d support in both cases, VirtualBox and native (I unfortunately need the 3d support for Gnomeshell...).
But personally, I would prefer the NVIDIA Driver, because of the power control facilities which Nouveau lacks right now.
Does somebody know a way to use the NVIDIA Driver an has 3d support within VirtualBox?
Thanks in advance!
Kind regards!
Last edited by PhiGamma (2011-11-07 14:42:42)

Similar Messages

How to get data from Oracle using Native SQL in SAP.. Problem with date

Hi Masters.
I'm trying to get data from an Oracle DB. I was able to connect to Oracle using tcode DBCO. The connetion works fine
I wrote this code and it works fine without the statement of where date > '01-09-2010'
But i need that statement on the select. I read a lot about this issue, but no answer.
My code is (this code is in SAP ECC 6.0)
DATA: BEGIN OF datos OCCURS 0,
      id_numeric(10),
      component_name(40),
      comuna(10),
      record_id(10),
      status,
      sampled_date(10),
      END OF datos.
DATA: c TYPE cursor.
EXEC SQL.
connect to 'LIM' as 'MYDB'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'MYDB'
ENDEXEC.
EXEC SQL PERFORMING loop_output.
SELECT ID_NUMERIC, COMPONENT_NAME, COMUNA, RECORD_ID, STATUS, SAMPLED_DATE
into :datos from lims.SAMP_TEST_RESULT
where     date > '01-09-2010'
ENDEXEC.
EXEC SQL.
disconnect 'MYDB'
ENDEXEC.
How can i get the data from that date?? If i delete the where statemet, the program works well, it takes 30 mins and show all the data, I just need the data from that date.
Any help
Regards

Please refer the example in this link which deals with Oracle date format.
You can finnd a command DECODE which is used for date formats. If you have a look at whole theory then you will get an idea.
Link:[Bulk insert SQL command to transfer data from SAP to Oracle|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bulk-insert-sql-command-to-transfer-data-from-sap-to-oracle-cl_sql_connection-3780804]

How to fix "server problem" error message when trying to use PhoneGap build service.

I have a site that is now optimized for mobile devices and want to use the PhoneGap Build service in Dreamweaver CS6 to make a native app. Unfortunately, I keep getting the "We seem to be having server problems." error message when I try to create a new project. I did notice that the configuration file was created at the site root. I've seen a few other similar threads on this, but no solution. I've checked on any firewall issues (none) and know that the PhoneGap server is not down. The problem is on my end.
Thanks,
Loren

Not an answer to the server problem, but I have posted the PhoneGap Build process here: http://forums.adobe.com/message/4669054#4669054. It might help anyone still having problems.

[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)

Dear Experts,
i am getting the below error when i was giving * (Star) to view all the items in DB
[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)
As i was searching individually it is working fine
can any one help me how to find this..
Regards,
Meghanath.S

Dear Nithi Anandham,
i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
Regards,
Meghanath

Why to use SharePoint Server over SharePoint Foundation within Team Foundation Server?

What are the advantages to use SharePoint Server 2013 over SharePoint Foundation 2013 within Team Foundation Server? I can't find any features comparison: in other words, what features are I'll be missing in TFS without SharePoint.

Look this links
Compare SharePoint
Foundation 2013 vs. Server 2013
https://social.technet.microsoft.com/Forums/sharepoint/en-US/7539e14e-a2a4-4f79-b3d4-e41b7abfda66/sharepoint-server-vs-sharepoint-foundation?forum=sharepointgeneralprevious

HT201320 I am getting message smtp server problems when trying to set up email. I am using a tiscali email

I am using a tiscali email address. I can receive mails ok and even have all my folders on my iPad but cannot send any emails. I get smtp server problems. Any idea how to resolve?

Cannot send or received email
http://www.apple.com/support/ipad/mail/

Is it possible to use Apple Configurator to do a remote wipe of an iPad? Or must I use the profile manager tool within OS X Server?

Is it possible to use Apple Configurator to do a remote wipe of an iPad? Or must I use the profile manager tool within OS X Server?

no apple configurator connects via usb
you'll need a MDM solution such as OSX server profile manager for remote wipe
OTA pushing profies remote wipe etc
you could use icloud for remote wipe

Can I use PDK within Orion Application Server

I usually run applications within Orion Application Server but I`d like to use portlets developed with PDK.
Please submit responses to [email protected]
Thanks

hi,
PDKJava V2 is J2EE compatible and comes as an EAR file. You can deploy jpdk.ear , just the same way you deploy other J2EE applicatons.
--Sriram

OEL support within VirtualBox

Hi,
We were wondering, we have an x4170 server with Oracle Premier support. Oracle Enterprise Linux and Solaris are supported. We currently run Solaris as the host OS, and we're wondering if a guest Oracle Enterprise Linux OS would be supported while running within VirtualBox? Or put simply, does being a guest OS invalidate support for said OS, which is in this case OEL?
Cheers,
Tyler

Thanks again for the reply.
In all truth, aren't they the same? Just trademarks switched around, etc? If its not certified, though, then we are forced into it.
I was just following your blog post about OEL 5.3 with oracle database. I downloaded oracle database 11.2 onto OEL 5.3 on x4170, but when I brought up the installer, it was insanely slow. It took like 2 minutes to enter email address and password, and the next button disappeared and wouldn't reappear so I couldn't go any further (JRE related????). I then ran top, java was using 100 to 200% cpu, the graphics server was 70 to 90% cpu, etc. I was wondering if our problems would go away with another os that would allow us to update packages for free. But even on your blog, did you run up2date before installing oracle database?
Or perhaps its safe for us to upgrade to OEL 5.5? Redhat only certifies the x4170 server to OEL 5.3, though. I suppose I'll try OEL 5.5 tomorrow while we wait and see if we can't get a ULN csi (our local reps don't seem to have their act together due to the sun to oracle transition, we're part of a university as well so we may have a site license for it--fingers crossed).
Cheers,
Tyler
Edited by: tfunk on Aug 12, 2010 5:18 PM

Content Server problem after 5.0.2 upgrade

Hi,
We've just upgraded our staging environment from 5.0.1 to 5.0.2 and have lost all branding. The diagnostic script reports the following error:
==========
Community Branding Image Publishing Target : FAIL Settings
Community Branding Image Publish File Location: file://localhost/C:/ProgramFiles/plumtree/ptimages/imageserver/plumtree/portal/templates
Community Branding Image Publish Browser Location: http://<SERVERNAME>/imageserver/plumtree/portal/templates
Community Image FTP User Name:
Community Image FTP Password:
Possible Resolution
The file could not be found at the browser locationEnsure the community branding settings in content.properties are correct. The file location and browser location must be valid paths.
Error Details
Exception Message: Connect Failed. HTTP response code: 404
======================
I tried resolving both the file location and the http address from within the Content Server box and was able to without problem so I know it's not these it can't see.
I checked the pcs.log and the following error is reported:
======================
com.plumtree.openfoundation.io.XPFileNotFoundException: jscomponent file for jscontrols not found or failed to load.Exceptions encountered: - com.plumtree.openfoundation.io.XPFileNotFoundException: Failed to receive response from http://<PUBLICURL>/imageserver/plumtree/common/private/js/jscontrols/jscomponent.xmlin the alloted time (10000ms).======================
It appears that the Content Server is trying to access this xml file via the public url for the image server which, due to firewall configurations in this environment, it won't be able to do. I'd like to be able to change how it looks for this file to be http://<SERVERNAME>/imageserver rather than http://<PUBLICURL>/imageserver
Where is it getting this from for me to change it?
Thanks in advance for your advice, hope my problem description makes sense :-)
Anita

Hi Diane,
No, we haven't fully resolved this yet. In addition to the issue listed we've come across a number of others that look like problems from install. We've reached the point where it's looking more effective to try and uninstall Content Server and do a clean install from scratch rather than debug every little thing.
As part of the new install we're changing the architecture to create an internal ImageServer on the CS server and then use a scheduled task to push everything out to the external ImageServer on the portal box overnight. This should get around a number of the firewall and dns issues currently making communication between the two quite difficult.
We recently installed another 5.0.2 portal in a different environment and have had none of the same issues with it so we're a little perplexed. When we get this resolved I'll be happy to write a note about what it was. In the meantime if you get anywhere with yours please let us know.
cheers
Anita

An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. mail will not be sent.

Hii all,
I have a subscription which used to send report email daily 10 am morning
now today it does not sent an email the status i s showing above error message ..
why this occurs ?? at the time of subscription running time ??
i have checked there is not error of subscription it runs fine ..
only today errored ..
Kindly , help me
Dilip Patil..

Hi Dilip,
Based on the error message "An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database." it seems the issue is caused by the Report Server catalog databases are
corrupted.
To fix this issue, I suggest that you use the Reporting Services Configuration Manager to recreate the Report Server catalog databases. In addition, please make sure report server instance can connect to the report server database. For more details about Configure
a Report Server Database Connection (SSRS Configuration Manager), please see the following document:
http://msdn.microsoft.com/en-IN/library/ms159133.aspx
Besides, if the issue is caused by the connection to the SQL Server Reporting Services Report Server catalog database is timeout. Please refer to the following thread:
http://social.technet.microsoft.com/Forums/en-US/db4ca6c2-5445-4ff9-9f63-e20f3859cc70/error-throwing-microsoftreportingservicesdiagnosticsutilitiesreportserverstorageexception-an?forum=sqlreportingservices
If the problem is still existed, I would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to use Native XA in XE database?

Hi,
I am having problem in using XA datasource in XE. I understand if we are using XE database, jvm is not available. Thus, we have to use Native XA which requires using JDBC Thin Driver.
My JBoss hit below error during initialization.....
=====================================
2006-03-28 16:14:27,645 INFO [org.jboss.system.server.Server] JBoss (MX MicroKernel) [3.2.3 (build: CVSTag=JBoss_3_2_3 date=200311301445)] Started in 1m:18s:482ms
2006-03-28 16:16:05,887 WARN [org.jboss.tm.TransactionImpl] XAException: tx=TransactionImpl:XidImpl [FormatId=257, GlobalId=snz-dcs-001//51, BranchQual=] errorCode=XAER_RMERR
oracle.jdbc.xa.OracleXAException
     at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1157)
     at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:295)
     at org.jboss.resource.adapter.jdbc.xa.XAManagedConnection.start(XAManagedConnection.java:143)
     at org.jboss.tm.TransactionImpl.startResource(TransactionImpl.java:1148)
     at org.jboss.tm.TransactionImpl.enlistResource(TransactionImpl.java:636)
     at org.jboss.resource.connectionmanager.TxConnectionManager$TxConnectionEventListener.enlist(TxConnectionManager.java:455)
     at org.jboss.resource.connectionmanager.TxConnectionManager.managedConnectionReconnected(TxConnectionManager.java:343)
     at org.jboss.resource.connectionmanager.BaseConnectionManager2.allocateConnection(BaseConnectionManager2.java:483)
     at
Can anyone help to enlighten?
Or maybe provides me with basic configuration of using XA datasource in XE database so I can check whether my config is correct or not?
Any help will be appreciated!
Thanks before.
Joel

Hi,
Here's an update regarding my problem with XA transaction using XE.
I don't know exactly how, but it works now.
Here are the steps I did :
===================
1. I decided to try creating JAVA_XA package in XE database. I took the script
from oracle enterprise edition.
This package can't be compiled in XE Production version, but it can be compiled
in XE beta version.
2. After using compiling, the JBoss initialization was still failing.
3. Backup the database (with JAVA_XA) , and upgraded the beta-version to
Production version.
4. Restore the database (with JAVA_XA) into the Production version.
5. it works :))
Hopefully I can get some inputs/comments from the experts here in the forum.
Thanks for those who has responded to my previous posts.
Regards,
Yoel
Good job! A nice extra mile.

Insertion / Update of field of type "TIME" using Native SQL

Hi ABAP gurus,
We are trying to perform inserts and updates within an ORACLE table where a TIME field exists without suscess. We are trying to code it using Native SQL.
EXEC SQL.
INSERT INTO table (field1[name], field2[age], field3[birthday], field4[hour])
VALUES (:name, :age, TO_DATE(:date_birth), ¿:hour?)
ENDEXEC.
EXEC SQL.
UPDATE table SET field3[birthday] = TO_DATE(:date_birth), field4[hour] = ¿:hour?
WHERE field1[name] = :name AND field2[age] = :age
ENDEXEC.
Which is the right coding sentence in order to achieve our goal?
Many thanks in advance. Best regards,
Imanol

>
Imanol Beguiristain wrote:
> Hi all,
>
> I am sorry for being unclear.
>
> I do want to code both INSERT and UPDATE. That is clear.
>
> The problem we are having is that we don't know how to code (using Native SQL) such instructions using in the SQL sentence a field of TIME type.
>
> Any helps?
>
> Thanks in advance.
>
> Imanol
I've not heard of an Oracle TIME datatype; we used to use the timestamp which is stored as part of the date or we set up a separate column to hold the time defined as CHAR. Still, it is possible that they have created such a thing since I last did SQL. In which case, there would have to be a function like TO_DATE which you would use to convert your time to its time format.
If you mean TIMESTAMP you can use something like the following to do the data conversion.
TO_TIMESTAMP(LOCALTIMESTAMP, 'DD-MON-RR HH.MI.SSXFF')

Bridge CS4 Server problem- slide show not loading

Hi
I have created a slide show in CS4 and emdedded the index code in my gallery page, created in Dreamweaver CS4. I have used an iframe within a DIV tag.
Preview works fine in both Chrome and IE. However, once uploaded to Server, all that can be seen is a grey screen.
I have contacted the server Heart Internet to see if they can help but as yet no idea.
I was just wondering if anyone has come across this before and if so, is there a quick fix I can implement.
I am basic but ok with HTML, and can insert code, if given it, but no good at the problem solving side of code writing.
Any ideas would be really appreciated
Thanks

It sounds as if for some bizarre reason, the transition is causing the player buffer to empty out.
This happens on certain - usually older - players when sequential cells are set as non sequential in compiling.
(I had this one bite me - hard - recently, although from a different application).
Best way to check this is to go get a copy of the excellent PGCEdit (shareware) and load the compiled disc.
http://download.videohelp.com/r0lZ/pgcedit/index.html
Find the main timeline for the slideshow, and double click it. (see attached image)
The "chapters" will be listed, and we need to see these ticked as sequential playback, or seamless.
If there is no tick, add one between each track, save the disc & reburn with IMGBurn (freeware/Donationware)
http://www.imgburn.com/
For some reason, certain chipsets seem to create a gap when transitioning a chapter marker on a timeline with a single sequential audio stream when the chapter is incorrectly set to non seamless.
This may not be what is happening here, but I think it is worth a look.

*** [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of UNIQUE KEY constraint 'ClientPushMachine_G_AK'. Cannot insert duplicate key in object 'dbo.ClientPushMachine_G'. The duplicate key value is (16777412). : sp_CP_CheckNewAss

*** [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of UNIQUE KEY constraint 'ClientPushMachine_G_AK'. Cannot insert duplicate key in object 'dbo.ClientPushMachine_G'. The duplicate key value is (16777412). : sp_CP_CheckNewAssignedMachine
CCCRT::RunSQLStoredProc - Failed to execute SQL cmd exec [sp_CP_CheckNewAssignedMachine] N'xxx', 1
CCRQueueRequest::GetRequestFromQueue - Failed to execute SQL cmd sp_CP_CheckNewAssignedMachine
I get the above issue and the one below at a client site; the error started with the error below then changed to the one reported above and back to the one below. Everything is working as it should but the issues
started when one of the admins at the data-centre incorrectly applied a gpo which affected a number of service accounts (sccm inclusive) and they expired....hence reporting in sccm got broke as well as this error in the ccm.log file appeared.
Remote client install still works but I believe this error affects new client discovered by sccm, so in other words devices discovered by sccm do not get the client installed automatically....but if all access and permissions are in place...pushing out the
client to the new discovered system works, it just not done automatically, which kinda defeats one the reasons for using sccm.
I have searched the breadth of the tinternet and I can only find two technet reference to the same error - one says to edit the stored procedure on the sql server which I don't think should be done... Like Jason said and I concur....its bad joo joos.
The second suggestion, said you should select all the options in the Client Push Installation properties, I have tried this but hasn't solved the problem.
I am planning to upgrade the site to the R2 CU3 before the end of the year but I would like to resolve this error before the upgrade.
The site is currently sccm 2012 sp1
Any idea?> Resolution? sil vous plait!
Merci

Hi ,
Please back up the database of the SCCM site. Then run the following query against the Site DB and see how it goes.
DELETE FROM System_SMS_Resident_ARR
WHERE ItemKey IN (
SELECT ItemKey FROM vSystem_SMS_Resident_ARR
GROUP BY ItemKey
HAVING COUNT(ItemKey) > 1
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Use native ArchLinux within VirtualBox - X Server Problems

Similar Messages

Maybe you are looking for