Use NetWeaver internal ITS as ITS for another 6.20 based system

Hi,
Our R/3 systems are 4.7 with 6.20 WAS. So to use a the webgui I need to have an ITS (for which I dont have a server available).
We have a Netweaver 2004s based Solution Manger though with an integrated ITS. Do you know if it is at all possible to use the integrated ITS of the Netweaver system as an ITS for the 6.20 based system?
If yes, how do I set it up?

Hello Adriaan,
Sorry, that is not possible. The Integrated ITS must reside on the system that you wish to have ITS access from. Please see note 709038 for further information. Thanks.
Edgar

Similar Messages

My canadian iphone 4S screen looks yellow and its looked to rogers, will apple singapore can replace my iphone 4S screen for free coz its under warranty for another 6 months

my canadian iphone 4S screen looks yellow and its looked to rogers, will apple singapore can replace my iphone 4S screen for free coz its under warranty for another 6 months... i'm in singapore at the morment so what is the best thing i should do ?? will they send my iphone to canada for the repair or do i have to wait till i fly back ???

No.
You would have to send your iphone to someone you know in Canada, then that person would have to get the iphone to Apple.
Apple will not accept a shipment from outside the country.

Can I use my jetpack as a modem for another company?

I have internet through another company. Can I use the Jetpack as a modem for the other company? I don't want to have to buy any other equipment!!

No, it is a Verizon-only device. And, most likely, the other company wouldn't allow it as it would be incompatible with their services.

Using a recorded meeting as content for another meeting - how?

I'm trying to set up a webinar where we play a recorded meeting. We don't want people to access the meeting whenever they want, we want everyone to view it at the same time. The manual/help documents say:
"Also, a recorded meeting can be used as content for another meeting."
But I can't any information on how to DO this.
Can anyone help?
Dayna

That is truly a poorly placed sentance with no explanation. To achieve this, you will need to make an offline version of the recording, so you have an FLV version that can be played in the meeting room. Here are the steps: http://help.adobe.com/en_US/connect/8.0/using/WS20F14479-39A1-42e2-AF0A-F8C2F1AA9BE4.html
If you want people who do not have access to an Adobe Connect server to view a meeting recording, create an offline version. The offline recording is saved as an FLV file, which can be viewed in an FLV player, and distributed via e-mail, CD, or a server.
Note: Creating an offline recording takes approximately the same amount of time as the duration of the original meeting recording.
You can minimize the offline recording window or view other windows on top of it without interfering with the contents of your recording.
From the Adobe Connect Central home page, click Meetings or Training, and then click the meeting or classroom that includes the recording.
Click Recordings.
Next to the specific recording you want to use, click Make Offline.
If Help text appears, click Proceed with Offline Recording. Then specify a location for the finished FLV file. The meeting begins playing, creating the offline file.
As needed, click the Pause/Resume, Stop And Save, and Start New controls:
The Pause/Resume button temporarily stops creation of the offline recording. This can be useful if you must download a large file and do not want to strain system resources. When you click Resume, the recording continues from where it was paused. The finished recording is one continuous file regardless of how many times you paused and resumed recording.
The Stop and Save button ends the creation of a recording, which is useful if you want to record portions of a meeting as separate files. Click Start New to resume recording where you left off.
When the recording process finishes, close the offline recorder window. (If the window is minimized, it closes automatically.)
Have the recording open on a moinitor with high resolution and full screen (before minimizing to the sytem tray), so as to get the best quality recording.

Using my software to convert videos for another user - how do I sync it ?

I have been using a software to convert dvd for ITouch with great effect. now I want do do same for a friend - but am worried that when I syn i will loose all that's currently on her iTouch. How can I do this?

Before someone points out that we cannot discuss of even act like converting a DVD is possible because it is allegedly illegal, you are not asking that. You, by magic we assume, can do this. You are asking whether you will lose what is on her iPod.
I am not sure you can sync her iPod from your system but if you did you'd want to set it to only sync what you checked and then only check that one movie.
I wonder... is there a reason yo cannot just move the converted file from your computer to hers and let her import it?
-fred

Building package using makepkg does not resolve dependency for another

I am trying to install yaourt from the AUR. Yaourt required that package-query be installed, and this package further required another, etc.
In short, package-query required yajl, which I downloaded from the AUR. This package does not actually have a PKGBUILD, but rather un-tars into a file that you need to merge with /usr. After doing so I tried to make the package-query package but was still met with a dependency discrepancy. Luckily, yajl was available in the official repositories (same version). After using pacman to install it everything went fine and package-query built and installed fine.
When I went to build yaourt, using makepkg, it failed and informed that I was missing a dependency, package-query.
So, in short, is there a registry or something that keeps track of these installed packages? I imagine that when running makepkg there is a query against installed packages to see if you meet the dependency requirements. What can I do to build yaourt in this situation?
Last edited by sherrellbc (2014-06-08 18:37:19)

cower doesn't have any dependencies that are not in the official repositories. It doesn't build packages automatically, but it will download the source tarballs and unpack them for you. It can also handle dependencies with the official repos and the AUR.
So for example, if you were to do cower -dd yaourt it would tell you that gettext, diffutils, and pacman are in the official repos. Then it would download the source tarball for package-query and resolve all of its dependencies. And it would download the yauort source tarball and unpack that for you. So it gives you an idea of what depends on what and in which order you should build and install.
But you really just shouldn't use yaourt. Many of the upgrade issues that arise on these forums stem from people using yaourt (particularly those who blindly run yaourt -Syua). The pacaur I mentioned above is a bash script that wraps cower. So it too should be able to be built and installed without having to resolve other AUR dependencies.
Edit:
But none of this is really answering the question though. When I make a package from the AUR, the dependency requirement when trying to install another package is never met. That is, if package A requires B and I then installed B (from the AUR), when I try to make A again it still informs me that B was never installed.
If this is the case, then you really don't know how to properly use the AUR, and thus should be reading up on that rather than trying to work around it with an AUR helper.
Last edited by WonderWoofy (2014-06-08 19:18:47)

Using both internal and external drives for iTunes

Hi
I know this is a basic question . I did a few searches and my head started spinning .
I've been using an external drive for my music but it only has 3GB left .
My internal drive has 12GB so I would like to start to use it for storage of music along with the external . (I'll be getting a new mac soon)
In Importing I have >Create file names with track number
Advanced>Keep iTunes Music folder organized
This is on my Panther eMac with iTunes 4.7.1
thanks in advance for any help
----------bob
Powerbook Mac OS X (10.4.6) Panther eMac

The only thing you have to do is to click the 'Reset' button in Preferences>Advanced>General.
Your 'iTunes Music folder location' will be reset to the default location on the internal disk.
All new imported music will be stored there.
New added music will be stored there if you have the checked 'copy files to iTunes Music folder location when adding to library' in Preferences>Advanced>General.
When your new Mac arrives and you want to transfer the library, first copy the entire 'iTunes' folder (in ./Users/YourUsername/Music) from your eMac to the exact same location on the new Mac.
To transfer the iTunes folder, you can burn it on CD or DVD, but a lot easier is to put the eMac in Firewire target mode.
This article tells you how to do that:
How to use FireWire target disk mode
After the transfer of the iTunes folder is completed, connect your external drive and run iTunes.
The new Mac will have a newer iTunes version and it will take some time to convert the old library format to the new format.
Once all works OK and If you want all your music on your new Mac, use the 'Consolidate Library...' command from the Advanced menu in the menubar.
All music from the external disk will be copied to the internal disk.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.6) Several ext. HD (backup and data)

Using Azure internal load balancer (ILB) for Sql Reporting Services

I am attempting to implement a scale-out SSRS deployment using the Azure ILB feature. I have created 2 Sql Reporting servers using the azure images and have created a ILB endpoint on both servers. I am then attempting to access the servers via the
ILB from my .Net web application. I can access the report server from my browser and am prompted for credentials using forms authentication. there is no issue accessing the reports from a browser however my web application cannot access the reports
and returns a 500 error. I have a hunch this is due to an authentication issue due to invalid kerberos proxy authentication.
Does anyone have any information regarding the possible authentication mechanisms that are supported using Azure ILB?

Thanks for the response Swallow0417, but as I stated I already had configured this to work in a browser. I should have mentioned that I already had set the machine key and altered the rsreportserver.config file as mentioned in
https://msdn.microsoft.com/en-us/library/cc281307.aspx.
It turns out this was due to the extended data validation that was introduced in SQL 2014.
This page led me to alter rsreportserver.config so that:
<RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
<RSWindowsExtendedProtectionScenario>Any</RSWindowsExtendedProtectionScenario>
After restarting the report server service my application now can make the requests for the reports successfully. I'll provide the other steps I took to hopefully help someone else in the future:
1. Create 2 or more SQL servers in an Azure availability group on the same service in a Reports server scale out deployment. The SSRS Service account must be a domain account or it will not work
2. Create an Azure ILB using powershell and add the endpoints on your http(s) ports on the server in step 1. I also set the endpoint IdleTimeoutInMinutes to 30 on both endpoints as it seemed like there was some possible timeout issues. the endpoint MUST
also have DirectServerReturn Set to $true
3. disable the loopbackcheck see method 2 here
http://support.microsoft.com/kb/896861
create a DWORD registry key value 1,
DisableLoopbackCheck,
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
4. Configure View state validation by setting an identical machine key on all servers behind the azure ILB
5. Create a Host record in your AD DNS for the Azure ILB IP Address.
6. configure hostname
and URLRoot in rsreportserver.config - see
https://msdn.microsoft.com/en-us/library/cc281307.aspx
Setting the hostname tag breaks the report manager url. It is only
required to set the URLRoot tag. I do not think it is required in this configurtaion only for Windows
NLB
6. Configure the authentication method in rsreportserver.conig
<RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
<RSWindowsExtendedProtectionScenario>Any</RSWindowsExtendedProtectionScenario>

Using the Template of one site for another site.

Hi,
I have created and published Site A using a template (DW CS4). I now wish to create Site B and use the same template from the Site A.
The only thing which will change is the banner which I create in Photoshop for each site.
I also wish to use the navigation buttons which were part of Site A's template. Can this be done?
One note: all the files from Site A have been copied into Site B.
Any help is greatly appreciated.
Frank

One note: all the files from Site A have been copied into Site B.
Including the template? If so, then blast ahead. Things should work fine.

Using one thinkpad as a screen for another

Hello fellow thinkpadders,
I have an X1 Carbon and an X230, and I'm wondering if I can connect them in such a way that I can use one as the keyboard and the other as the screen. In other words, I'd like to have one at desk level and the other raised up about a foot and a half -- so that I can sit straight at a desk and not have to bend my neck forward (looking down) at the one I'm typing on.
Usually, I work with the X1C using a large screen at my desk and this isn't an issue. I also have the Lenovo ThinkVision LT 1421 14" portable screen (which is awesome) -- but it's only 200 nits, and on some occasions, working at my local library (where the light is quite bright), I've wondered whether I can simply bring along both computers, and prop one up (at a higher level) to use as a portable screen.
I know this sounds a bit crazy, but I'm quite tall, and the neck paid I feel using these things at a normal desk level renders them unusuable without an external screen.
Thanks!
Solved!
Go to Solution.

Hello,
Perhaps a program like Input Director, Mouse without Borders, Multiplicity, ShareMouse or Synergy will do what you are looking for?
Failing that, you could always connect a Lenovo ThinkPad USB Keyboard with TrackPoint to the system for use as an input device.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Using iWeb to create a site for another .Mac family pack user

I started a new site in iWeb for our son today, but I can't see how to upload it so it resides in his part of the family account we have on .mac.
Is this possible?
If not, if I publish his pages how does it interact with our main family site that is currently uploaded.

But with two sites in iWeb now, what will end up on my son's part of the site when I hit publish? Should I try to keep changes to just one site or the other and do the user ID switch, or will it try to post all the pages to each account?

Is 180w PS enough for a Cel. p4 based system?

I am building a system MSI MS-6526-GL-L, Celeron 1.7GHz 478-pin, 256ddr, Maxtor 81GB UDMA133 7200rpm, DVD. I need a small case, the MB is a MicroATX and all the MicroATX cases I see are 180w. Is this enough power for the system I'm building?
This is for buisness programs only, no games. I usually build XP systems and run 350w minimum power supply but I need compact system.

should be i see no reason why not, especially since you aren't using a GeForce 4 which are power hungry, it should work fine

New Draft-N Card for Legacy PowerBook (PPC based)

Any words yet or recommendation on a wireless card for legacy PowerBook (PPC-based) systems? I know the newer systems have the updated AirPort Extreme (using the Draft-N enabler), but what about others who have older PowerBooks with a user-installable card. Will Apple be creating a new wireless card for use in these systems? Or is there a 3rd Party compliant card to use in the PC Slot of the PB G4 that is Draft-N and works with the new AirPort Extreme base station N?

I doubt it.
When Airport was upgraded the last time (from 802.11b to 802.11g), the older hardware was stuck with integrated cards that could not be upgraded.
Is this Apple being mean? Not really.
The new n hardware needs two or three antennas to work. Older laptops with 802.11g have only one antenna built into the case - so you can't simply upgrade the card.
The only way to upgrade is if a third-party manufacturer produces a mac-compatible version. Which could happen. But it would be the sort of card that sticks out of the PC-Card slot.
It's not ideal, but remember that laptops get upgraded all the time, and you can't upgrade the processor or the screen either.
Glyn

Re:update windows 7 Service Pack 1 for x64 based system (KB976932)

Hi, I tried to updte automatically and mannually : windows 7 Service Pack 1 (KB976932) for windows 7 x64 based system. However error 404, happened, no solution suggested I can find online. Could someone can help me?

Hi,
From your error message, error 404 generally means whenever someone asks for a page that’s simply not
available on your site. The reason for this is that there may be a link on your site that was wrong or the page
might have been recently removed from the site. As there is no web page to display, the web server sends a
page that simply says "404 Page not found".
Did you get this error when you download or install process?
Please disable your firewall and antivirus temporarily and then download the package from the following address:
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
http://www.microsoft.com/en-us/download/details.aspx?id=5842
Note: make sure choose the proper version (x64) for your system.
After that, run this "Fix it" tool below and install the update again:
Fix the problem with Microsoft Windows Update that is not working
http://support.microsoft.com/mats/windows_update/en-us?entrypoint=lightbox
Karen Hu
TechNet Community Support

I am trying to change or add the email address which is attached to my itunes account. I keep getting a notice saying email address is already verified for another Apple ID. Im sure its one of my devices. How can I get my current email address added?

My itunes account is attached to an email account that I no longer have and cannot retrieve. I have been having trouble with purchases made to my itunes account and want to view my purchases. The support center said that they would email me the purchase history. However, I don't have that email address. When I go to change my email address to my current one, I get a message in red saying that "the email address is already verified for another Apple I.D." I'm sure it is one of my devices as we have 4 ipods and 2 iphones. How can I get my account to use my current email address? If one of my devices was registered using my current email address as it apparently was, do I need to figure out which device that is and remove the email address from that account? I'm so confused. I just want ALL my devices to use my current email address. I need to replace the old email address with my current one. How do I do that?
thanks for any assistance.

Your best bet would be to try resetting the password to the account that you would like to use via iForgot
Once you log in to that account change the email address to anything, it can even be fake its just a placeholder
After you do that you will be free to change your old email address on your appleID to the new one that is now free to be used as it is no longer attached to the other account.

Use NetWeaver internal ITS as ITS for another 6.20 based system

Similar Messages

Maybe you are looking for