Use NI LabView and LabView RT with third party PXI chassis

I want to use NI LabView and LabView RT, some PXI chassis of N.I and
some PXI chassis of Third Party( not N.I ) for diversity, How I will Install
Pharlap ETS ( LabView RT ) on those third party PXI's.
More simply
Third party PXI chassis and controllers support LabView RT or not?
Note: Mark Andre Hary [email protected] of Sensing Systems LLC answer to this question as:
"You can't.  I think NI bought Pharlap, and they do not offer board support packages (BSPs) for non-NI PXI controllers.  There is no way to get LabVIEW-RT running on a controller not purchased from NI.  You will have to use a standard RTOS like Linux,VxWorks, or QNX.
Regards

As described in the web links below, the only way to run LabVIEW Real-Time for ETS on a third-party system would be to follow the procedure for desktop PC computers. You may find that your third party PXI controller may meet the requirements listed in the below link and you will be able to run Real-Time on the controller. If you decide to do this, you will need to purchase the LabVIEW Real-Time Desktop Deployment license (also linked below). After purchasing the deployment license, you will be sent boot disks that will install the real-time OS onto your system. There is no need to purchase Pharlap ETS from Ardence directly.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/cb3434da94466dd286256e9e006bb775?OpenDocument
http://sine.ni.com/nips/cds/view/p/lang/en/nid/13751
Instead of using LabVIEW Real-Time for ETS, you could use LabVIEW Real-Time for RTX instead. This system allows you to run Windows and the Ardence Real-Time eXtensions (RTX) real-time kernel concurrently on one machine. Currently device support for LabVIEW RT for RTX systems is limited to RIO devices. This is all described in the below link.
http://zone.ni.com/devzone/conceptd.nsf/webmain/9cc60298315a687e86256e78007b3a96
I hope this answers your question.
Regards,
Kristi H - National Instruments

Similar Messages

  • Time Capsule and time machine with third party router

    Hi,
    This is the first time I use this site.
    I have over three years old Mackbook.
    APP has expired.
    Now I want to know how to set up time capsule in a new environment.
    I moved from Australian and Singapore.
    I was using Time Capsule and Airport Extreme in Australia.
    I have moved to Singapore.
    I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
    Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
    What I did so far is;
    Connected the time capsule to the power point.
    Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
    Apple Utility does not recognise Time Capsule.
    I prefer to use it wirelessly.
    There are only two USB cable ports installed.
    One is used to synchronize iPhone.
    Other is used for a printer.
    but if it is not possible, wired would be OK.
    MacBook 13 inch 2.0 GH Late 2006
    I hope that someone able to give me an answer for this.
    Cheers,
    morepubholidays

    In this case the apple support people reveal a truly poor understanding.
    You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
    IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
    If you already tried this and it didn't work.. try again.. it is the correct approach.
    You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
    So here is how to get the utility into your computer.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0
    Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
    Select this and update..
    Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
    Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

  • Compatability of LabView RT with Third Party( NOT N.I ) PXI chassis

    I want to use NI LabView and LabView RT, some PXI chassis of N.I and
    some PXI chassis of Third Party( not N.I ) for diversity, How I will Install
    Pharlap ETS ( LabView RT ) on those third party PXI's.
    More simply
    Third party PXI chassis and controllers support LabView RT or not?
    Note: Mark Andre Hary [email protected] of Sensing Systems LLC answer to this question as:
    "You can't.  I think NI bought Pharlap, and they do not offer board support packages (BSPs) for non-NI PXI controllers.  There is no way to get LabVIEW-RT running on a controller not purchased from NI.  You will have to use a standard RTOS like Linux,VxWorks, or QNX.
    Regards

    Hello,
    You can install LabVIEW RT ETS on a third party PXI controller just as if it were a PC.  Check the requirements that a PC needs to have in order to run LabVIEW RT ETS.
    Check the following link:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/cb3434da94466dd286256e9e006bb775?O...
    Ricardo S.
    National Instruments

  • How to implement a dual booting PXI system using windows 7 and labview RT

    Good Day
    My name is Mariano Ocana from the University of Manitoba, and I want to implement a dual system using windows 7 and labview RT in a PXIe-1082 chassis with a PXIe-8102 embedded controlled (the chassis came with windows 7 installed). What are the steps to use both systems (windows and RT)  in the same chassis?, in the NI help comes an example implementing a dual system using windows xp and RT, it is the same procedure?.
    Thank you in advance for all your help.
    Regards
    M. Ocana

    Greetings, Mariano.
    The real issue you have to contend with is whether or not you have a LabVIEW RT license.  If the 8102 controller was purchased Windows-Only, you likely do not have a license to run LabVIEW RT on the controller - you can purchase one, I think it's about $500, and at that point you can request a LabVIEW RT Configuration CD (that's not what it's called, but the sales guy will know what I'm talking about).  The Config CD is a CD that will partition your controller correctly with both FAT32 and NTFS filesystems (in the appropriate way) to allow you to run Windows 7 and LabVIEW Real-Time on the controller correctly.  Once done, you can then switch within the BIOS between LabVIEW Real-Time and Windows in order to dual-boot.  
    Either way, you likely need to contact NI sales to either purchase an RT license (if one was not received at the time of purchase) or to request a Configuration CD (it might also be called a dual-boot install CD or similar).
    -Danny

  • Could I use two regular computer to achieve realtime communicat​ion using the Ethercat and Labview Real Time Module?

    Could I use two regular computers (one acts master , another one acts as slave using the Ethercat Internet Card) to achieve realtime communication using the Ethercat and Labview Real Time Module? if it could, what hardware should I purchase from the NI ?
    Thank you!

    Hi Xiaolin,
    NI doesn't offer Windows based Ethercat master or slave software. Only LabVIEW RT can run the Ethercat driver. 
    However, you could use a LabVIEW RT target as an Ethercat master and use the Ethercat Internet Card with a slave PC (note: I think this will work from the Beckhoff description of the card you are describing. The card should integrate like any other non-NI slave. However I haven't tested the setup and don't advise saying it will work until you have tried). 
    You can use any NI RT target with two ethernet ports as the Ethercat master. This could be a cRIO, PXI or RT Desktop. 
    Jesse Dennis
    Design Engineer
    Erdos Miller

  • Hide Label step icon using Testand API and LabVIEW

    Hi,
    can anyone tell me how it is possible to hide the icon of a label step using Testand API and LabVIEW?
    In the Teststand Sequence Editor, on the Label Edit Tab there is a Checkbox called "Hide Icon". Is there something similar in the API?
    Thanks
    Solved!
    Go to Solution.

    Yes you can, you will have to set the IconName property of the step to "ni_blank.ico"

  • Motion control: PXI 7350 controller and UMI 7774 to interface with third-party driver UDK5114NW2

    Dear community,
    This is about Motion control in Labview: I try to control a step motor by using a PXI 7350 controller and UMI 7774 to interface with  third-party driver UDK5114NW2. The problem is 5 Disable LEDS on UMI 7774 board always lit even when I check "enable" on "Motion I/O setting" in configuration of PXI 7350 motion controller. Furthermore, when I start to control step motor, it is not working and I found disable LED on UMI board still lit. I don't know how to solve this problem. Can someone help me to figure out? Thank you in advance!
    Hau Nguyen.

    Dear Community,
    I said wrong, 4 disable LEDS on UMI 7774 Board instead of 5 as my previous post. Why nobody help me to solve this problem. I can not turn off disable LEDs on UMI 7774 Board so I can not start the strp motor. Please help me!
    Hau Nguyen. 

  • Really Apple? OSX 10.8.5 disables built-in camera functionality with third party apps such as Skype and Gmail video chat. I do not have time machine on my 2013 MB Air. How can I get back to 10.8.4?

    Really Apple?
    With the release OSX 10.8.5 Apple has once again showed its true colors, and continued its efforts to create a closed Apple system, which eliminates third party vendors, unless, one can only assume... they pay.
    Included in this OSX update is the disabling of the built-in camera to work with third party applications such as Skype and Gmail video chat. No surprise the camera works just fine with Apple apps such as Facetime and Photobooth.
    The answer I got on my call to AppleCare to ask for assistance in reinstalling 10.8.4, so that I may Skype again, was we can not do that. You can not go back unless you have a time machine bkup.
    Can anyone help me get back to to 10.8.4 on my 2013 MB Air?
    I do not have a time machine bkup as this computer is not used to store important documents.
    Thank you.

    Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
    Another: isight not recognized in Skype after 10.8.5 upgrade
    Don't panic. Skype simply needs to update its app.

  • Problems with third party package and file access

    I am using a third party package that allows me to decode
    multipart forms that I use to upload files to our server.
    I have been able to write my own code (JSP) that both reads and
    writes to our filesystem. However, when I try to upload a file
    using the third party package the method I am using fails with
    the following IO exception: The error message is "access is
    denied." But the files get written and are usable (even binary
    files). I have checked the directories and all the dirs I am
    writing to have read, write and execute permission.
    I have access to the code so when I duplicate the actual
    methods used for writing (FileOutputStream.write(foo)) in my
    JSP, it writes fine without exceptions. In fact, I use
    FileOutputStream.write() in other code and it works fine. My
    question is: why would FileOutputStream work in packages we have
    developed and not in a third-party package. I have added the
    codebase and filePermissions to <weblogic_home>\weblogic.policy
    without any changes.
    I am running WLS 5.1 and NT 4.0 with SP5.
    Does this problem sound familiar to anyone?
    thanks for any and all help,
    saulj

    HI Mike,
    If you have third party Document Management System, then you can post two different message, i.e. service order in transaction details of the third party tool with link to document which would be posted to third party Document management server.
    If you don't have third party document management system and what to use sap infrastructure, then you don't need to maintain attachment, maintain the link between the third party tool and SAP document repository, with some login utilities.
    Best Regards,
    Pratik Patel.
    Reward with points if it is of any help to you!

  • EDI Integration using PI with third party connectors

    Hi Experts ,
    I would like to know the extra cost factors associated if going for EDI integration with PI with third party connectors like seeburger .
    1. We have NW 2004s ECC installed . Do we need to purchase PI separately? If yes how much will it cost ?
    2. How licensing will happen in case of PI ?
    3. How much Seeburger will cost ? Is there any sort of AMC associated with seeburger
    4. Do we install Seeburger and PI on the same box ?
    5. How will be the landscape with Seeburger Instance ?
    6. How we will be able to move Seeburger Objects across the landscape ? DEV->QA->PRD
    Regards ,

    Santosh Rawat wrote:>
    > Hi Experts ,
    >
    > I would like to know the extra cost factors associated if going for EDI integration with PI with third party connectors like seeburger .
    >
    > 1. We have NW 2004s ECC installed . Do we need to purchase PI separately? If yes how much will it cost ?
    Yes your need to but PI separately,its independed product,its not come with ECC.
    > 2. How licensing will happen in case of PI ?
    Better to talk with SAP Sales team,they will help you with genuine answers.
    > 3. How much Seeburger will cost ? Is there any sort of AMC associated with seeburger
    Its depends on which See Burger Adapter You are going to use,.
    > 4. Do we install Seeburger and PI on the same box ?
    Yes ,we need to deploy the seeburger drivers on PI Server.
    > 5. How will be the landscape with Seeburger Instance ?
    google it,you wil find the answer i am not sure
    > 6. How we will be able to move Seeburger Objects across the landscape ? DEV->QA->PRD
    As per my knowledge when you develop any interface using seer burger adapter or predefined mappings,its same procedure to transport also.
    Regards,
    Raj

  • Iam using iphone 4s and Iphone 5s with same apple ID but my network is different and whenever Iam getting call in i5s and in my both handset same calls are coming. Please provide me solutions

    Iam using iphone 4s and Iphone 5s with same apple ID but my network is different and whenever Iam getting call in i5s and in my both handset same calls are coming. Please provide me solutions

    On both devices, go to Settings>Facetime and turn off cellular calls.
    ~Lyssa

  • Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both

    Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both. Want to give one to wife.do I need to open a new iTunes account for her?

    bashepard wrote:
    Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both.
    Yes, No problem at all.
    Want to give one to wife.do I need to open a new iTunes account for her?
    No - you can share the same iTunes account (my wife and I share the same account). But when you sync the iPads, just remember to select the correct content for her iPad and the correct content for your iPad.

  • Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.

  • My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ?

    My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me.

    shahzadfromlahore wrote:
    Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me
    Who set up the phone? Who's Apple ID was used to activate it?

  • My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

    My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.  
    Can not load the Organizer from the icon at the bottom of  Editor screen, from the icon on the MacBook Air dock (OS 10.10.2),  nor from the file in applications located with Finder.
    I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences.  I have searched on line for other options but not  found any. 
    Can you help me?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

Maybe you are looking for