Use of Allocation planning in campain

Hi experts can any one brief me the importance of Allocation planning in campaign.

Hello,
I would really appreciate if you can send me any documentation about Allocacion Planning in Campaigns.
Best regards,
Mariana
[email protected]

Similar Messages

Dispatch Capacity using Product Allocations

Looking for a bit of guidance on an issue. Have a scenario where we get heavy demand on dispatching requirements. Strangely enough, SAP doesn't have any capacity planning around Logisitcs Execution from what I have seen - it assumes unconstrained capacity to dispatch stock. So I am looking to use Product Allocation based on a total volume (key figure) per site (Characteristic) basis.
My issue is around the Planning Period indicator. I want to use the Allocation model on a daily basis - i.e. fill up the Dispatch 'bucket' daily and once filled, it will look to the next available planning period. I need to do this daily - not weekly or monthly. Period indicator 'T' (Daily) is available but the planning parameter doesn't seem to like this.
Anyone manage to get this working on a daily basis? Other than that I may have to go down the custom path, which will be sub-optimal, as the standard functionality works sensationally at a weekly or monthly basis.
Cheers,
Paul...

As per usual, I solve the issue just after I log a question in the forum!
It appears that within MC7F, that the Planning Period indicator is also controlled via table T445A, which is maintainable. I updated the table, checked the planning parameters associated with my Info Structure, which showed up as 'T', then assigned the entry to my transport. I recreated my Plan via MC93 (after deleting the old one), and the daily planning buckets have come through.

WANTED: Function Module (Product Allocation Planning Hierarchy Upload Tool)

Hi,
I would like to seek assistance in utilizing the <b>right function module</b> in uploading Product Allocation Planning Hierarchy to MC62.
I've tried direct table update and BDC but to no avial.
Points will be rewarded.
Thanks in advance

Hi,
I'm having trouble using the FM 'MCP_GET_HIERARCHY'.
CALL FUNCTION 'MCP_GET_HIERARCHY'
    EXPORTING
      i_gstru             =
IMPORTING
RETURN              =
    TABLES
      t_filter            =
      t_char_values       = .
What do I put in i_gstru, t_filter, and t_char_values?
I'm very new with this.
Thanks in advance for the help.

How to use Same Inspection plan for Multiple Plants?

Hello,
When I create a Process Order for material (M1), release and save it for a Plant A then I get the Inspection lot automatically.
Now I have another Plant B that we have created. We would like to use the same Inspection plan that has been created for Plant A and M1
So in the changed mode(QP02) of the Inspection plan for Plant A in the material assignment tab I added the Material M1 and the Plant B. I am assuming this means when I create the Process order for M1 in Plant B then it should use the same Inspection plan.
But when I create the Process Order for M1 for Plant B, release and save it then it does not created the Inspection lot automatically(though I can create Inspection lot manually)
Can you tell me if there is setting that will allow me to create the Inspection lot automatically on saving the Process order which should use the Inspection plan that I just assigned.
And also let me know if there is a better way to handle same Inspection Plan for same material but multiple Plants.
Thanks
SAP Fans...

Dear,
For your message my understanding is that you are not getting Inspection lot created in Plant"B". Inspection lot for a material would get created based on the Inspection Setup for the material master "QM View", so compare the QM for the material in both plants and correct it for Plant "B".
Probably I feel Inspection Setup is not complete for the material in Plant "B" - Generally when extending material by copying referance, in the QM view you need to click the Inspection Setup Button, for the data to be copied...otherwise it does not copy the Inspection setup from the referance plant.
Regards,
Prasobh

Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad? I would love to use my new ipad away from home but not sure how to use it?

Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad? I would love to use my new ipad away from home but not sure how to use it? I am on Telus mobility with my iphone 4s.

See the answer on the same question you asked a few minutes ago.

Installing components using auto-generated plans from Jython CLI

Hi All,
for specific reasons, we want to install a set of components with fixed signatures from Jython CLI, but without appropriate plans. In fact, we want to simulate the behavior that we know from Plugin UI, i.e. linking directly to an installer of a component.
We figured the following steps are necessary within CLI code:
1) For the targeted component generate an appropriate install plan using 'pdb.p.genplan' command. This unfortunately does not create the plan within the system, but rather has to be redirected to a file.
2) Import the previously generated plan using 'pdb.p.ci' command from this file.
3) run the plan using fixed signature to install component
4) eventually remove the plan.
Now, the problem is, that step 1) generates a plan targeted for the folder '/system/autogen', but step 2) fails on importing the plan there, because the folder is owned by the system plugin. So we would end up parsing the XML file, replacing path and so on .... We definately don't want to reinvent the wheel, here.
Any help appreciated!!!
Regards,
Frank

First of all, thanks for the super-fast reply.
We got around with parsing using the xml.dom.minidom package in Python. Three more lines and poorer performance, but nothing you can measure against the CLI performance itself ;-)
I like the idea of using a template plan, as you suggested, because the generated ones bear another problem: We have to pipe in the plan parameters, which we don't know for sure, except for one, that is the 'markOnly' flag. So this might get us around piping in stupid dummy params.
How exactly do you wait for the plan completion? We use 'pe.p.lo', but don't know how to figure out, if it was successful or not, at all. No return code this time, and stdout isn't filled in markOnly=true mode.
Regards,
Frank

Down Payment processing for Sales orders using Milestone Billing Plan

Hi,
The business scenario is as follows.
The delivery for the sales orders are to be created only after the pre payment( a percentage of the total sales order value) is made by the customer.
Hence the sales orders while creation are blocked for delivery creation using credit block by means of a userexit.
The credit manager checks the blocked sales orders using VKM1 transaction and verify if there are any payments made by the customer to cover this pre payment to be made.
If it is enough to cover then he releases the sales order manually for delivery creation.This is a complex process since there are too many sales orders and the payments made by the customer may not match the amount to be paid(it can be greater or lesser).The customer just pays a huge amount which is to be distributed among the sales orders for pre payments.
Later, when the invoice is created, the customer account is cleared manually using F-32 transaction for the oldest open invoices.
Here again there is a huge manual effort involved since he need to distribute the amount against the invoices using oldest open item principle.
As a solution we are planning to implement "Down Payment processing for Sales orders using Milestone Billing Plan".
Is this the right solution?
Can you please give the steps in detail to implement this functionality for above scenario?
We are using SAP 4.7 version without Project Systems.
Thanks in advance.
Regards,
Ragesh

Hi Ragesh
Check the links where you will get the entire down-payment configuration
[https://forums.sdn.sap.com/post!replydownpayments ]
Regards
Srinath

How to use ODI and Planning Adapter.

How to load the dimensions in planning using ODI and Planning Adapter. I am just looking for a functionality that we used to have with HAL and Planning.

Hi,
Have a read of my blog it should give you all the information you need.
Cheers
John
http://john-goodwin.blogspot.com/

How to identify Which function modules are used in the planning area?

Hi all,
there are couple of function module derviation is used to derive the calendar year, month, fiscal period etc.
But how to identify which function module is used in which planning area?
I cant find out from the where used list from function modules?
Thanks
pooja

Hi Pooja,
Go to characteristic relationship tab,click on detail icon on extreme left of the derivation,there you will get the name and the details of function module used for derivation.
Regards,
Indu

How to use Hierarchy for Planning?

Hi everybody,
I have created a query, which is input ready.
This query uses a hierarchy which contains different positions being used for cashflow-planning.
My Problem is that cashflow not only consists of positions that have to be added, but also positions, which have to be subtracted/discounted.
I don't know whether it is possible to put my hierarchy into a structure and work with functions (because the function is not able to select child-nodes dynamically, I guess).
That's the reason for me asking:
Can I just instruct my hierarchy not to add eyery node, but also subtract them?
I will be very thankful for every hint being given.
Regards,
Martin
(p.s.: I'm sorry for my bad english. I'm out of practise.

Hi Martin,
welcome to sdn.
follow this link regarding your query...
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/05d13fa69a4921e10000000a1550b0/frameset.htm
assign points if it helps.

Create a print button in webtemplate used for integrated planning - BI 7.0

Heelo Guys,
Can you please let me know how to add a print button in the web template which has a input query and which is used for integrated planning. The user want to print the report.I haven't worked in web template and thought of asking you if there is any button or standard sap functionality I can use for printing the report . Thanks in advance for your help. We are in BI 7.0.
Thanks
Senthil

Hello
What you are experiencing is not clear for me, but in general you have to install the BI ABAP + BI java to have planning modeler working. Ensure that BI Diagnostics (note 937697) and also ensure that you have setup your system according notes
919850 and 947376.
I hope this helps.
BR
Lucimar
Edited by: Lucimar Moresco on Oct 14, 2010 3:58 PM

IMessage using my data plan

I received a text message from AT&T this morning saying that I had used 65% of my data plan already (it is the second week of February). I don't use the internet or internet using apps very often, so I was very confused when this happened. I called apple and they proceeded to tell me that when I'm not in a wifi area, my iMessage will use my data plan. If this application comes with the iphone 4s , then why isn't there a way to disable it when on the 3g network only? I want to be able to use the iMessage application, but cannot afford the unlimited data plan in order to do so. This is ridiculous, so if anyone else is having this problem, please write back. Also, if anyone has figured out how to disable iMessage just in 3g areas (for the 4s), please let me know.

Either don't use iMessage while on 3G or turn 3G off ENTIRELY under Settings > General > Network > Cellular Data OFF.

Which data sources I need to use for Actual&Plan comparision of GL Account?

Could you please let me know which datasources I need to use for Actual & Plan comparision of GL Account data?
Current SAP BI version is BI 7.0.
As per my knowledge, I am thinking of using the datasources 0CO_OM_CCA_1 for Plan data & 0FI_GL_10 for Actuals.
Is this right?
I have one more question here:
While extracting the data from ds 0CO_OM_CCA_1, I am getting only the Profit & Loss Account data where as the Balance Sheet Account data is not coming.
And also there is some confusion in VTYPE because the standard ds 0CO_OM_CCA_1 is giving the data with Value type 10 is & Version 000.
As we all know the VTYPE '10' stands for Actuals then how can we say that this ds 0CO_OM_CCA_1 gives Plan data?
Please clarify.

Hi,
Basically 0CO_OM_CCA_1 data source is used to extract actual, plan, and commitments.
This data is differentiated with value type, you can see sap note 523742 for more details on value type.
For balance sheet accounting data check the below link,
[http://help.sap.com/saphelp_nw04s/helpdata/en/5d/ac7d8082a27b438b026495593821b1/content.htm]
Regards,
Durgesh.

3rd party process using product allocation for ATP-check

Hi all,
is there anybody out there who can share experience in setting up the 3rd party process using product allocation on APO for ATP-check? As the documentation is not that impressive any help is higly appreceated.
Thanks
Michael

This will not be correct forum to reply to your query.
Still, try following Hyperlink for some understanding,
[Third-Party Order Processing by Product Allocation|http://help.sap.com/saphelp_scm70/helpdata/EN/7c/2b7941601b030de10000000a1550b0/frameset.htm]
Thanks & Regards
JP

Essbase Variable with more than a value for use after in Planning forms.

I want to now if it would be possible to create a variable with more than a value for use after in Planning forms.
The variable that I want to use is created in Essbase.
Example:
&Years = FY08,FY09,FY10

Hi.
The only workaround I know for the problem is to create parent in the dimension.
In your case, create member “planyears”.
Then you define children that are shard (this are the multiple member for the variables FY08, FY09 etc..)
Create Essbase sub variable that will have 1 member value “planyears”
When you use the Sub Variable in form select function “Children” and in that case it will use the member FY08,FY09 etc on the form.
Limitation: I’m working on version 9.2.0.3 so you can’t create hierarchy in the year dimension, but you can use it in other dimension.
AE

Use of Allocation planning in campain

Similar Messages

Maybe you are looking for