Use of backslash sign but not in fraction format

I have trouble formatting a cell so that a backslash sign does not read as a fraction. A cell formatted as "automatic" will return 88/97 when I type 88/97, but 1 9/88 if I type 97/88. I could not find the relevant instruction in the user guide.

parau wrote:
I have trouble formatting a cell so that a backslash sign does not read as a fraction. A cell formatted as "automatic" will return 88/97 when I type 88/97, but 1 9/88 if I type 97/88. I could not find the relevant instruction in the user guide.
Just a detail, the described character is not a backslash, *_it's a slash_*
Yvan KOENIG (VALLAURIS, France) dimanche 22 août 2010 20:48:13

Similar Messages

Adobe form-Able to post data using Adobe Reader 9 but not with Adobe Proff

Hello Guru's
I am facing one problem with adobe forms.
We have develoed a adobe form using adobe reader 9.
Now when user are posting the purchase requistion using the form,they are able to post the data using
Adobe Reader 9 but not with Adobe Reader professional.
Can anyone please advice me what can be the problem here.

Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers.

Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers. Is there an efficient way to this?
I'm thinking I can convert the files with Compressor and place them in a new folder with their original file names (not sure how to get compressor to do this yet) and then do a major "Reconnect Clip" afterwards.
Not sure if there's a more efficient way to get all the clips in the timeline to compressor. I want the full files, not a sequence export. I can go through one clip and a time and add the master file. I'd rather not.
The more automated processes the better.
Thank you. I'm currently working so I don't have the time to scour the forums. Help or links to help would be greatly appreciated.
B

yeah Media reconnect can be an issue.
Will Media Manager convert files? Another thing I was thinking was to Media Manage the sequence out, copying all the used files to a new folder, and then running that through compressor. But it still leads to a massive reconnect. Fine tuning all those edits would be less involved than re-editing the whole thing, I hope.

Adding an image when signing, but not in the signature field, in Reader

Hi,
I would like to know if it is possible to add an image to a pdf document when I sign the document in Reader.
I do not want to add the image in the signature field as a signature, but rather below the signature field. The image is 'n barcode providing me with more information on the signature.
I have looked at the Stamper example, but this functionality is not avialable in Reader.
Thank you,
Magda

If you insert after signing you will break the signature!! You need to do any such stamping BEFORE signing.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 26 Oct 2011 23:54:15 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Adding an image when signing, but not in the signature field, in Reader
Re: Adding an image when signing, but not in the signature field, in Reader
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3992619#3992619

HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
Russ

I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

GACU,
OK, now I think I understand your problem.
If it is your calendar that is being shared with other users who have been granted editing priviliges, you will not be able to exclude those events from printing.

Webservice Connection Error: Signed Content not in recognizable format

Dear SAP experts,
We're having a webservice connection error, when our trading partner is sending test messages to our server.
They are getting this specific error,
service: GIPPullAgent.Util:checkSignatureNoCache
Error: [ISS.0086.9062] Signed Content not in recognizable format
[ISS.0086.9062] Signed Content not in recognizable format
Have you encountered this specific error?
Kindly advise for any helpful tips.
Thanks!
Gerberto

Hi,
The issue was already resolved.
We generated the correct Signature value which is needed in the WSDL.
Thanks for your support!
Gerberto

REFInd stuck but works using UEFI Shell v1 (but not v2) [FIXED]

Hi,
First ArchLinux install and it gets problematic. I've followed the Beginner's guide and am now in the following situation.
rEFInd get stuck on:
rEFInd - Booting OS
Starting vmlinuz-arch.efi
Using load options 'root=/dev/sda5 ro rootfstype=ext4 add_efi_memmap initrd=\EFI\arch\initramfs-arch.img'
The \EFI\arch\refind_linux.conf contains the following line:
"Boot" "root=/dev/sda5 ro rootfstype=ext4 add_efi_memmap initrd=\EFI\arch\initramfs-arch.img"
Interestingly, when I start it from the UEFI shell (from the arch installation cd) it works with the v1 but not the v2 !?
What did I overlook?
edit: initrt was a typo… sorry.
Last edited by greut (2013-03-27 18:10:53)

greut wrote:
srs5694 wrote:Second, try simplifying your command line. The "rootfstype=ext4 add_efi_memmap" options are probably unnecessary, so removing them (at least for testing) is desirable.
Yep, I can boot using only:
vmlinuz-arch.efi root=/dev/sda5 ro initrd=\EFI\arch\initramfs-arch.img
But still, it works with the UEFI Shell v1 from the liveUSB but not using the shell v2 or via rEFInd directly.
Is there any particular reason you need those options? If not, just leave them out and call it fixed. If you care to do more investigation, though, I'd be interested in knowing which of those two options is causing problems -- or perhaps if only the combination of both of them is causing problems. If either alone works but not both, then I'm inclined to suspect there's a problem with the length of the options line, although that seems odd, since I'm pretty sure I've tested with long options lines in the past with no sign of trouble.
I also can't help but wonder if this might somehow be related to the problem being discussed in this thread, which also has a bug report here. That seems to be a problem with specific kernels, but it's conceivable that there's an interaction between kernels and some other unknown factor.
FWIW, I just did a quick scan of the most relevant section of the rEFInd code and I didn't spot anything suspicious about how it's handling those strings. In fact, it's using allocated memory rather than fixed character arrays, so a hard limit caused by a string of length x seems to be unlikely as a cause unless it were in the kernel's EFI stub loader -- and then you wouldn't see the difference based on the boot manager type (EFI shell v.1 vs. EFI shell v.2 vs. rEFInd).

I can no longer login to receive my webmail with a second email address; i have already cleared my "saved passwords" and cleared my history, and still i can only login using one email address but not my second one, which i previously was able to do

details are listed in the question; i login using one email address to this site but not my second, which i have always been able to do
The error message is:
Login failed because your username or password was entered incorrectly.
However, all my login information is correct.

try the hints found at
http://support.apple.com/kb/TS1417

Websites will convert to a PDF using Adobe Acrobat 9 but not Adobe Acrobat XI

Hello,
We have noticed that there are several websites that can be concerted into a PDF using Adoble Acrobat 9, but do not work with Adobe Acrobat XI. An example is the website http://amseventsubc.com/. This site converts with no problems using Adobe Acrobat 9, but will not work with Adobe Acrobat XI. When one tries to convert the website (by going Create > PDF from Web Page > Capture Multiple Levels > Get entire site > Create) it starts to work for about 10 minutes but then stops and crashes the program.
Does anyone have a suggestion for how to fix this problem?
Is there any reason why a website would work in an older version of Acrobat and not the most recent?
Thanks for your help!

Hi, we are actually not looking to have active links but rather to have the content from each link saved as part of the PDF (We are looking to convert the entire website's content to PDF). On Adobe X you can normally append any link so that its content will be converted and added to your PDF, however, this can't be done with XML links.

TS3276 Anyone experiencing problems sending mail using TalkTalk - can receive but not send - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

Anyone experiencing problems sending mail using Apple Mail viaTalkTalk - can receive but not send - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

jag157 wrote:
"I managed to solve the problem. Under smtp settings (mail preferences/accounts/edit smtp) I set the outgoing port to 25 (as recommended by Talktalk), no authentication (set to none) and unchecked SSL. I found that until I set the port to 25 and authentication to none I was unable to uncheck SSL. One I had done this I was able to send from my main email and other email adddresses set up under my account."
Superb advice R&W! My email sending block using TalkTalk started 2 months ago using Snow Leopard, continued when I upgraded to 10.8.2, and has been persistent on my wife's new iPad (IOS 6.1). Implementing your wise words has fixed all that, and now enables me to call her on FaceTime — previously only she could call me. Thank you so much; this will save hours of further fruitless searching and phoning.
Please remember that your email is now insecure, if you wish to have a secure connection SSL must be on and port 25 should be avoided.

Data plan used if MiFi connected but not actively being used?

If computer is on overnight but not in use, meaning MiFi connected, with that use up my data plan? Or does it use up with "active" use only? I'm sharing internet with other people so I'm not sure my data plan is being used on purpose or just getting eaten up while we are all asleep? I'm already maxed with 3 weeks to go!!!

As long as you have devices connected to the MiFi there is always a risk that those devices will consume data behind the scenes without your knowledge. This is how network connected devices work, they are constantly "in use" while connected. Computers, smart phones and any kind of internet connected devices are constantly backing up content, looking for updates and talking to other network devices. It has nothing to do with your active participation and all internet communication is held against you on your data plan.
The only way to completely stop data usage is to turn off your MiFi when it is not needed. This is a common safe practice that you should start using when on a metered data plan. MiFis are not intended to be left on 24x7 anyways, frequent reboots will help ensure the device stays in proper working order and increase the longevity of its life.
Verizon does provide everyone with a data log. The data log will provide you with time stamps and the amounts that are consumed at those times. It should be easy to see when your biggest spikes of consumption are. Isolate what devices are online during those times and what may have been going on and you can start to build a picture of where the problem lies.
To truly see the network traffic in terms of specific applications, web services or devices you need to find and install network monitors. Network monitors come in a variety of applications so you need to find and build a monitoring system that fits your environment. Considering you have other people connected to your MiFi it would not be uncommon for each of you to install a separate monitor specific to those machines.
Let me know if you have any other questions.

Using iWeb ftp trouble but not with Fetch

I have a site I created with iWeb and I cannot get it to publish to the ftp server (3essentials). I currently publish the site to a local folder, then upload the site folder using fetch. I would like to do it all through iWeb. But I keep getting an error? Any ideas on why it work for fetch and not iWeb?
thanks for any ideas.

Thanks for the tip. I tried it, and I had more success but not complete ...it now goes along farther without quitting,but says my password is incorrect. Which doesn't make sense because it is the same password that works for Fetch.
any ideas?
thanks,

Can login to OS 10.4.9 server using 10.4 client, but not with 10.3.9 client

When I try to login to OS 10.4.9 server using 10.4 client, all is fine, but not with 10.3.9 client -- what's up?
It seems that when I set the group preferences (what kind of dock the users in our elementary school see, etc.), it doesn't affect 10.4 clients, but when trying to log onto the server using a 10.3.9 client, it just runs and runs, never logging on. Have to eventually restart the client computer. If I take a user out of a group with preferences set, it's fine. So, help! Most of my computers in my lab are 10.3.9. All are bound.
Thanks,
Joan

Hi Devils_Coup,
first of all: WELCOME TO THE DISCUSSIONS!
It is strongly recommended to use OS 9.1 or higher. However, you do not have to buy it, just download and apply the free updates here: Mac OS 9: Available Updates.
Also make sure your firmware is up-to-date: Firmware Upgrades.
In MacOS X remember: Repair permissions before and after an update!
If this answered your question please consider granting some stars: Why reward points?

I want to send messages using my iPad Air but not as iMessages

I Don't want to use iMessages but do want to be able to send messages (they can stay green) because I sometimes want to do the message but not to another apple user. I am unable to send any messages using the text bubble icon, or receive them to look back at them, except on my phone. Do I need to sync those somehow or changes settings. I have disabled "iMessage" in my settings! I could do this for a while but have had several changes since then trying to get my iPad to be what I need it for.

To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Use of backslash sign but not in fraction format

Similar Messages

Maybe you are looking for