Use of BDT to extend BP

I'm using BDT to extend BP to have a table control that is mapped to a Z-table. Couple of problems that I'm facing are:
1. In the function module for the DSAVC event, I'm calling the function 'CHANGEDOCUMENT_PREPARE_TABLES'. Is there any other setting required to display changes to values in the new table?
2. I need to hide the new table control based on partner role. I tried transaction BUCG to set diaplay properties of the table but results are inconsistent. Example, I need the table to display only for Contact persons. After making the BUCG change, when I pull up BP for a sold-to, the table is hidden. But when I switch to a contact person using the relationships button, the table does not become visible. If I start BP with a contact person, then the table is visible.
Any assistance will be appreciated.

Hi,
we have the same problem. We are using SRM and ROS in one client. If we transfer the preselected supplier from ROS to SRM using OPI we get an error message. The message is processed, if we try to save/create the new supplier as business partner in SRM. If we clear the BP number which comes from ROS everything works fine. But this cannot be the correct solution.
Any ideas?
Regards,
Sven

Similar Messages

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
Thanks!

It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

Can I use airport express to extend my network AND stream iTunes???

I have an airport extreme connected to the cable modem and sending a signal out to my home network. I also have a powerbook and an airport express connected to the home stereo.
My question is, can i use the express to extend my extreme signal (to reach the back yard) and stream music from itunes at the same time? The set up utility seems to suggest that you do one or the other.
Thanks!

Are you sure you configured the Express to extend the Extreme's network? If you use the standard setup, the two base stations will be indistinguishable, i.e. you'll only see one entry for the wireless network.
If you were connected to the Extreme when you configured the Express, try turning off Airport in the Airport menu and then turning it back on. The computer should pick up the stronger signal at that point.

I just set up an Optus Cisco DPQ3925 wireless router to access higher speed internet I signed up for. I have a 4th gen airport extreme I want to put in another room and use as a wifi extender the wifi but I get an error message each time I try. Help?

Hello all.
I have just set up a new cisco DPQ3925 wireless router that Optus sent me to be able to access the higher speed internet I have signed up for.
I have a 4th gen apple extreme that I want to use to extend the wifi but when I try to update the settings via the airport utility I get a message that says it cannot do so, and to check it is in range and the wifi is set up correctly. I'm not experienced with these things but I can't think what I have done wrong.
Is anybody able to help me please.

You cannot use the AE to extend wireless from a non apple router such as your cisco modem router.. they are not compatible..
You need to tie to the two devices together either with ethernet or something like EOP adapters.. They are about $120 and you can price match in officeworks.

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go.

I was using time capsule to extend a network. now i want it to be the primary base station. how do i convert this?

i was using time capsule to extend a network. now i want it to be the primary base station. how do i convert this?

Thanks for the info. Since this is a cable modem, you will need to fully reset it so that it will associate correctly with the Time Capsule when it is reconnected.
I don't have the manual for your Ubee model handy, but most modems will reset if you power them down completely. That means pulling the power cord from the back of the device or unplugging from the wall. Leave the modem powered off at least 30 minutes...longer will not hurt a bit.
Next, perform a Factory Default Reset on the Time Capsule per this document:
Resetting an AirPort Base Station or Time Capsule FAQ
After the modem has been powered down and Time Capsule has been reset, connect an Ethernet cable from the modem to the WAN port (circle icon) on the Time Capsule.
Power up the modem and let it run for 2-3 minutes by itself
Then power up the Time Capsule and let it run a minute or two
Next, open AirPort Utility and configure the Time Capsule to "Create a wireless network". Let us know what operating system you are using on your Mac or PC if you have additional questions or need more details on this.

Using Time Capsule to extend a wireless network

I have an office in the top of my house (2nd floor roof conversion) and as a result the wireless signal from the ground floor is very weak. i would like to boost the signal using my Time Capsule, placing it on the 1st floor, shortening the distance the signal has to travel.
Is this possible? In the AirPort settings I can seen an option to 'extend a wireless network using an ethernet cable' but if that is the only option I may as well just move my wireless home hub to the 1st floor.
Can the network be extended wirelessly?
many thanks!

Thanks for the clarification.
Unfortunately, the "extend a wireless network" feature of the AirPort Express is only compatible with an Apple base station.
Therefore, you will not be able to use the TC to extend the wireless network that has been created by the BT Home Hub. You might check to see if BT offers an "extension device" or "remote" that would allow you to expand your wireless signal.
The TC will need to be configured to "Join" the wireless network that you have there.

The numbering format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended

The numbering in (Contents) format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended.

The issue is that I have made up a contract in Word.
The second page has a list of all contents of the contract.
gghhjhhbhbhhbhbjbhj....1
bv v vghvjvjnnnnnnnnn....2
When we convert to PDF some of the numbers change. Example 20 becomes 201.
Your help is appreciated.
Cheers Ocean designs.

Wat is the use of sid in extended star schema rather than linking masterdat

hi bw gurus,
wat is the use of sid in extended star schema rather than linking masterdata with dimention tables?
thanx in advace,
i will assign points,
srinivas

hi,
the sid are used instead of the data in order to avoid the redunduncy of data.
and reduce the datastorage size.
the data will be present in the sid table and the data is linked used the corerponding sid in the dimension.
regards

Friend suggested I use Airport Express to extend my network to fix dead spots, should I just plan on replacing existing Netgear and buy two AXn's?

I have a few dead spots around the house and I am seeking a good solution without pulling ethernet cable. Reading this community it would seem best if going with Airport Express solution to replace my Netgear and pick up a couple of AXn's. Or perhaps Airport Extreme for base at cable model and AXn for extension?
I had assumed I could just configure one AXn and put it in the dead zone, but reading configuring roaming network indicates you need two. I was planning on adding Apple TV in extended zone does this change anything?

There are a number of possibilities of using multiple AirPorts to extend the wireless range of your network without using wires. Please check out this Apple Support article for more details.
Since your goal is to use wireless connections between routers, you will need two or more AirPort to accomplish this. Unfortunately, extending the Netgear by wireless will not work due to WDS compatibility issues between router manufacturers.

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Can AirPort Extreme be used as a signal extender?

Can AirPort Extreme be used as a wireless extender, wi fi booster?

If you are planning to "extend" wirelessly......the AirPort Extreme will "extend" the wireless signal from another Apple wireless router....but....it will not "extend" the wireless signal from a 3rd party router.

I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

A universal may work but reliability tends to be poor..
You are much better using another airport .. extreme or express.. even a second hand older one.
Or do not use wireless bridge or repeater.. simply run ethernet or use EOP adapters to a second WAP run independently of the main router.. it is far more reliable and far faster solution .. wireless bridge/repeater will halve your wireless speed.

Using Airport Express to Extend a wired network using Belkin N Router

I have an ethernet/wired network in my home office and am using the Belkin N Router which is connected to the upstairs by ethernet also. I have a wireless network that the Belkin router uses to let me connect to the internet wirelessly if needed and I use it for my MacBook Pro inside the house but can't outside [the Belkin is connected to cablemodem].
I am trying to use my Airport Express to 'extend' the network from my home office out to my back deck by having it wirelessly be available [it is connected to main router/cable by ethernet/wired]. I have 5 bars on the Belkin Router wireless signal but very low unreliable bars from the Airport - either because it is not relaying the wirelss network of the Belkin router or it's not able to send its wifi signal from its ehternet/wired connection to the main router/cable modem, not sure which --
Short of pulling an ethernet wire outside to the back deck or getting an antenna to hang on my MacBookPro to better receive the home office wireless signal, is there a way to set up the AX soit can become an internet transmitter wirelessly of the wired network it is hooked to???
I read http://docs.info.apple.com/article.html?artnum=108040
but that didn't seem to help == and it appears the AX won't extend a non Apple wireless signal and I don't have one [tried the Extreme but it didn't work = the Belkin has been perfect = I can wirelessly connect in the room above the home office but would love to be able to use the AX to extend its power or at least use the wired linkage to then extend the power wirelessly....

Hey
in the following thread one of those top users posted a list of wireless routers AEXP is able to extend wireless network with via WDS
http://discussions.apple.com/thread.jspa?threadID=1492474&tstart=195
maybe that belkin is your modell?
and here:
http://ryanschwartz.net/2004/08/05/airtunes-airport-express-and-the-wrt54g
also here:
http://www.beatnikpad.com/archives/2004/10/19/airportexpresswds
are descriptions of how to connect to 3rd party routers (not belkin but the way to connect of both is quite similar so it might possiby help you too.
Not using wep, wpa/ wpa2 during installation and connecting the AEXP to Mac or Lan Port of your router should help.

Using airport express to extend network of 2tb time capsule.

Is it possible to use my old airport express using 802.11g to extend the network of my 2tb time capsule using 802.11ac protocol? If so, how?

You will need to use one of the 802.11n versions of the AirPort Express....either the model A1264 or A1392....if you want to wirelessly extend the signal from the Time Capsule.
The older 802.11b/g Express does not have the capability to do what you want.

Use of BDT to extend BP

Similar Messages

Maybe you are looking for