Use of Bluetooth printer for Pages?

Is there any way at all that you can print with Pages from your iPad to a Bluetooth printer?

The bluetooth profiles on the iPad do not allow direct printing. See:
http://support.apple.com/kb/HT3647
By looking at this it looks like it may be possible for someone to write an app and use the PAN profile. However, I know of no such app.

Similar Messages

How to use a bluetooth cellphone for audio input and output

Hello, I was wondering how to set-up my Mac Book so that I can use my bluetooth cellphone for audio in and audio out. Ideally, I would like to use my handset for talking on iChat and Skype. Has anyone had any luck doing this? When I bond my cellphone these optiosn do not appear. I know that this is easy to do on a Windows machine but I am not sure about how to do it on my Mac Book.
Thanks!

Yes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

Can I use Deskjet k109a printer for photo printing?

Can I use Deskjet k109a printer for photo printing?

Hi,
Yes, your printer can print photos as mentioned in the following link:
http://www8.hp.com/in/en/products/printers/product-detail.html?oid=3811379
Actually any printer can be used for photo printing, the results may not be the same.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Since updating to the new version the work web page that i use will only print 2 pages even if there are more. I can not get it to print all the pages in the document.

for instance....I have a documents that has 6 pages, I can scroll down and see all the pages but when i hit the print button it will only print 2 pages. I tried to change it in the setting part but there is no feature that allows you to change it.

For many years, Firefox has problems printing when some style rules are used. However, I am not aware of any changes for the worse in Fx4 (at least, until now I wasn't aware of any).
A couple of thoughts:
(1) Is it possible you were using an add-on in Fx3.6 that fixed this problem, but the add-on was disabled during the upgrade because it wasn't compatible? (Sometimes that can be fixed with a little hack.)
(2) Are there any obvious settings differences that could be affecting printing, such as fonts, margins, or shrink-to-fit/percentage?
(3) Does the workaround of selecting the entire page (Ctrl+a) and then choosing Selection under Print range in the Print dialog work? Unfortunately, this can slice through lines and images, but it often works around problems with style rules.
In the interest of saving paper, it often is useful to experiment with a PDF printer driver. If you don't have pdfFactory, you can install a trial version for testing: it lets you view the results without first having to save the file. (If you save with the trial version, there is a footer to that effect.)
(4) Is it an HTML5 problem? You can toggle the HTML5 parser off, but this is a global setting, not site-specific. If you are familiar with about:config, filter on html5 and double click '''html5.parser.enable''' to toggle its value from true to false. This helps for some sites, but has no effect on others.

I Am Begging for URGENT ASSISTANCE Using Create Booklet Service for Pages

I work for a Church; I prepare numerous bulletins weekly and while I am tickled to learn of Create Booklet Service, I need to know why in the "tutorial" of Create Booklet Service it says that when I am in the PRINT menu, and click on PDF at the bottom, I will have the option to click on "create booklet" ??? NOT ON MY SCREEN? I also have a problem with how tiny the print turns out when I was experimenting with this program, no matter how I changed the font size, OR INCREASED the size (on the navigation on the right of the screen) It still prints very tiny which will not work for many of our "mature members" HELP on this please!
May I please impose on 2 other small questions that are driving me nuts (I am converting from a lifelong PC user to Mac--which I adore) HOW DO I BACK UP to the last "motion or keystroke I made?" on the PC up on the top left is a circle with an arrow which will take me back "one task, if you will" I cannot figure out how to do this on the mac
ALSO
when I am working in Pages and I am adjusting text that I am typing ; on the PC, if I want to "bring a sentence that is divided between to lines" up together to join them; I could simply hit DELETE and the spaces would continue deleting until my broken sentence was joined onto one line? This does not happen on the MAC the DELETE Key simply deletes back.
ONE MORE QUESTION:
Why when I am copying and pasting a document from the PC to the MAC (trying to convert all my weekly projects from the PC to the MAC) the clip art, photos etc do not copy with the text? Very frustrating in the conversion process.
THANK YOU THANK YOU THANK YOU to anyone and everyone that can or chooses to assist me. I have spent countless hours and weeks just to finally discover Create Booklet Service TODAY!
Blessings
Patti

HarleyGirl328 wrote:
I thank you for your time and information; NO! I did not know that Create Booklet produces the booklet 1/2 the size of my pages document; so that was very helpful information. I have tried probably 2 dozen times to print this pages doc into a booklet for our Church bulletin and NOTHING works! I am so beside myself because time is minimal here; so many disruptions from phones ringing to people coming in. I stayed late many nights and come in early and I still cannot figure this out; I am not a computer genius but I am not stupid either! When I have my document prepared in Pages, do I then go to Page Set UP? or straight to Print?
I want to print a 2 sided document that has 12 pages (3 --2 sided legal sheets of paper in readable format) do I choose: legal small? legal ? A4? do I manipulate the % it shows that will print?
do I change the icon that reads portrait, to landscape?
I wish someone could tell me step by step what to do in print set up and print to have this print out so its equal to a 11pt font in Georgia font and the headings I use are bold and 12 pt. (or at least that is how I have been doing it in the PC for several years) I thank you for the reference on the book; time is just not on my side right now to find the book, and read it. It might sound like the lazy way? That is not my intention; I just need efficiency LOL! IF someone could only sit here with me and show me exactly how to set this up to print a legal size (8..5 x 14") 2 sided bulletin that I then fold and put into a cover...I would be thrilled beyond words! Peace my friend from Sweden! Many hugs
Patti
You can if you have installed the Create Booklet Service in a service folder you can either first Export the Pages document to PDF or you print to PDF directly and choose Create Booklet.
When you create the document have have already chosen which paper size to use. I use A4 but my guess is that you are american and uses legal. i don't think you should manipulate the %.
You don't have to bother your brain with landscape or portrait format. That will the application do.
If you find that the text is too small for your readers create a document with lets say font in 14 or 16 points.

Advice For Someone Using A Professional Printer For The First Time

Hello everyone
1. I'm doing some posters and flyers for my club using Pages. We've got them looking how we want on my home inkjet printer but now we need someone to print out large quantities. I've never used a professional print service before. There are simply loads of posts on this topic but I wonder if there is anyone out there that does this a lot and can tell me how they do it. I was hoping to initiate the definitive Professional Printing FAQ thread.
2. Reading the numerous posts, there are lots of terms that I don't understand like 'bleeds' and 'pantone'. Understandably, print is a whole new world of technical terms. Can anyone recommend a good introduction to all this on the web?
Thanks

I don't know of a good basic FAQ for printing, but I can try to address some of your issues.
What is a "large quantity", IanB? Tens, hundreds, thousands? In my experience this is probably the most critical issue, since it pretty much determines the printing method used (and thus the cost). Anything under about a thousand copies will these days likely be printed "digitally", which essentially means run off on a colour laser printer. In my experience, as long as you are not fanatical about colour accuracy, this method is very forgiving of the way the source file is set up, and most houses will take standard PDFs. It is much more expensive on a per-unit basis than offset printing, but there is also little/no "set up" cost, which means that for short runs it is often far more affordable in terms of total cost.
Once you get to big runs, where you need offset printing (presses that use metal plates for different colour inks), things change a fair bit, as you have to deal with colour separations and possibly spot (Pantone) colours as well. The setup costs for this kind of printing can be very substantial (making metal plates is expensive), but once set up, the cost per unit is far less than digital printing. If this is your first time out, I'd suggest either avoiding going this route, or finding a very understanding print shop that is willing to hold your hand through the production process.
As for bleeds, that refers to when objects on your document go all the way to the edge of a page. The problem with using bleeds is that they require the printer to print the page on a larger physical piece of paper, with the bleeding objects slightly over the desired edge, and then trim that paper down to size, cut so that the bleeding section is cut through (to avoid a white unprinted edge). But because the cutting is not always absolutely accurate, you need to leave space between the edge of the page and any material that absolutely has to be on it (e.g., text), so that the trimming will only cut away some of the bleed, but not the critical material.
Bleeds make setting up (and printing) your document much more complicated, and you will be much better off if you can avoid bleeds for your first experience doing professional printing. If not, I'd again suggest that you shop around for a print house that says they'll be willing to walk you through the process of how to format your document to do this.
I'm sure others here that are more experienced in the printing process can point you to more comprehensive resources, or give you more detailed advice.

I have ipad2. i want to use apple bluetooth keyboard for writing.but autocorrection doesn't work! can i solve this with settings?

i have ipad2 i want to use apple bluetooth keyboard on writing but auto correction doesn't work! how can i solve this? thank you

Have a read here How to set up your Apple Wireless Keyboard
Stefan

Is it possible to turn an hp 6500 all in 1 printer into a bluetooth printer for toshiba thrive?

Hi, i have 2 wireless hp 6500 all in 1 printers (1 upstairs and 1 downstairs). 2 of my relatives each have a toshiba thrive and they want to print to the downstairs printer. i haven't had a good day to play around with everything but neither of them can print. 1 of them doesn't have a computer as hers died. i am working on my old one to give to her till she can afford a new one and she doesn't use the tablet because she cant print from it. i did try for a bit and i tried google cloud print, hp's apps and no success.
where i work, their was a printer that had a usb-like device into it and another one like it to a computer and the printer could print wirelessly via bluetooth. the printer was a dell red product that is no longer sold. i was wondering if i cant print from the tablet via traditional means, can i ( if the printer doesn't already have the capability), use a similar device and print via bluetooth from the thrive to the hp.

No, you cannot scan over the network, unless the printer has network capability.. in which case the printer must connect via ethernet or wireless not USB.
All USB printers are designed as local printers not network.

Using film contact prints for image catalog, & making frame choices

In addition to importing new digital images and scanned film images to LR, I've started scanning contact sheets to create a key-worded catalog of earlier work for myself and others to easily use. This has been working very well for finding images, but I would like to be able to somehow mark several frames per sheet. Using cropped Virtual Copies is slow and akward. I think others might use LR for like purposes, as well. Is some sort of virtual "white pencil" marker possibe, perhaps in colors?

It might also be useful to integrate with Photoshop's automated Crop and Straighten Photos command. I've tried using that with contact sheets, but the text printed in between photos makes isolation of images very difficult. But some level of automation would be very helpful. Perhaps a four-point system where you click on the four corners of a photo for each frame you want to strip into its own file (or virtual copy).

Using 'Fb like' buttons for page content

I want to add a 'Fb like' button to individual photos in my site. I have a like button that links to my Fb page and 'likes' that, but what I would really like is for photos to appear in their activity instead of just the page address.
I tried adding an anchor and entering the page address with the anchor, but the button won't generate. Any ideas?

Hi,
Yes Weblogic controls the users/groups, but it can delegate this to, for example, an LDAP, active directory etc.
Take a loot at JHeadStart if you want to store user / group access in the database.
Depending on how much you can to restrict with security, you can make fields read only or not rendered at all based on the user roles.
When using JHeadStart it provides a map with user roles to access in EL.
If you write the code yourself, which is rather trivial, you can use:
acesContext.getCurrentInstance().getExternalContext().isUserInRole("role name");And just expose this as a bean on the session.
Or just create a map implementation which does the same, but thats a bit more code.
-Anton

HT5622 Can I use my finger print for my apple ID?

Is there a way to assign my apple ID to my finger print used on my phone when making purchases from the Apple Store or ITunes

Read this:
http://support.apple.com/kb/HT5883

Printing A3 page format using ABAP List from SAP is a problem...

Hi Experts,
I am trying to print a standard output (ABAP List) A3 page size from SAP.
I used SWIN, SAPWIN, I9HP4 device types, but none of them worked.
I created page format type ZYEVMIYE 290MM 420MM and the page format L120, W200. In order to make it usable with page size is A3. Unfortunately this did not work either.
The behaviour of the problem is when I tried to print with the device types that mentioned above then printer indicator comes to an error. And nothing comes out from the printer.
Just to be on the safe side I made a test from windows self test, it resulted success with A3 page size format. So from this point of the view I got a thought that somehow SAP (selected device types) is not able to send correct signal to Printer for page size A3, because on the printer information screen displays load Tray2 for A4 this is showing that SAP sends Printer a signal for page format A4.
I need help on how to make SAP (selected device type) send a correct signal to Printer in order to printout A3 page size format.
Quick reply will much be appreciated.

Hi,
At last i got a Solution to my Question.
The Problem is that in my SAP-Code they have been translated the PDF into 255 string.But i am retreiving using 132 string.So, i resolved in this way.
<b>For Each dr As DataRow In ds.Tables(0).Rows
Dim dataline As String = dr(0)
If dataline.Length < 255 Then
dataline = dataline.PadRight(255, " ")
End If
sb.Append(dataline)
Next.</b>
May be this Thread is useful to Others.
Regards,
Rajender.

How to use Satellite M500-ST5401 for mobil calls using Bluetooth

Team,
I would like to know more details about bluetooth connectivity of a laptop to the bluetooth compatible mobile phones.My Model is Toshiba Satellite M500-ST5401.
What i like to get to know is,I am having a mobile phone Sony Ericsson and it has bluetooth with A2DP feature.
Normally if we have a bluetooth stereo headset
mobile can be paired and listen to the music using the bluetooth headset for the music which is playing on the mobile phone.
Likewise what i feel whenever i receive the call on my phone ,i would like to transfer the call to my laptop where i would like to use laptop speaker to listen to the incoming voice and the laptop Mic to respond the call in laptop and then it will be taken care by mobile phones.
Please let me know if this is possible,i just want to keep the phone away from my hand and wanted to manage incoming and outgoing calls just sitting infront of the computer using Inbuilt bluetooth technology available in both laptop and mobile devices.
Please recommend me what are all the software and hardware driver to be installed for achieving this.
Your reply is very much appreciated thanks in advance.

You have already started an thread about this theme:
http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=181953
Dont create different threads about one theme to avoid misunderstanding!

Can I use c7280 printer for my I pod or I phone ?

Can I use my C7280 printer for my I Phone or I Pod ?

Hi,
You may print through the network from any iOS device by using the HP ePrint mobile app.
You may follow the 3rd section below to get any information about the app installation and usage:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02796271&tmp_task=useCategory&cc=uk&dlc=en&lang...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can we override the Desktop LAF for Pages using backing Files ?

Hi
I have the following Look And Feel related requirement.
We have an global application level Skin which was applied at the desktop level using the .laf file.
But some of the pages require a totally different Look and Feel apart from the one defined at the desktop level.
To put the question in the other way,
Can we override the skin & skeleton defined at the Desktop level using the backing file (for page or portlet) ?
The following is the code snippet, which i used in the backing file to achive the above.
LookAndFeel lookAndFeel = LookAndFeel.getLookAndFeel(request);
lookAndFeel.setSkin(y_skin);
lookAndFeel.setSkeleton(y_skeleton);
lookAndFeel.reinit();
Here the y_skin & y_skeleton are the new set of skin & skeletion which i have created for the page.
when i ran the above snippet in the portal framework, i found the desktop level skin is getting applied
to the pages insted of the y_skin & y_skeleton.
Any help or directions .... for dynamically changing the skin & skeletion for pages will be appreciated.
Thanks & Regards
- Sachi

What you are doing looks valid.
this is the code that i have
public void init(HttpServletRequest request, HttpServletResponse response)
// Get the session from the request
HttpSession session = request.getSession();
// Get the LookAndFeel object from the PrimaryTheme in the request
LookAndFeel lookAndFeel = LookAndFeel.getLookAndFeel(request);
if (request.getParameter("defaultButton") != null)
//System.out.println("default skin selected");
session.setAttribute("skin", "default");
if (request.getParameter("textButton") != null)
//System.out.println("text skin selected");
session.setAttribute("skin", "text");
if (request.getParameter("classicButton") != null)
//System.out.println("classic skin selected");
session.setAttribute("skin", "classic");
String selectedSkin = (String) session.getAttribute("skin");
if (selectedSkin != null)
//System.out.println("setting skin and skeleton to: '" + selectedSkin + "'");
lookAndFeel.setSkin(selectedSkin);
lookAndFeel.setSkeleton(selectedSkin);
lookAndFeel.reinit();
}

Use of Bluetooth printer for Pages?

Similar Messages

Maybe you are looking for