Use of bookmarks of resources which are located behind a S-to-S VPN
Hi there,
I was wondering if i can create (a) bookmark(s) of resources which are located behind a particular Site-to-Site VPN?
We are using a Cisco ASA 5510 (9.0.2) with SSL VPN configured. The tunnel is up but when i try the bookmark, i get the error "server unavailable".
Can someone put my in the right direction? I'm rather new at this stuff...
Thank you.
Hi Kimberly,
My apologies for my late response.
I'm using a clientless SSL VPN connection. I'm not using any DNS servers, just IP addresses for now to get this up and running.
I'm not quite sure what you mean by tunneling everything in this context.
Regards,
Jeroen
Edit: When i try to ping the destination from the Cisco ASA, the traffic is routed to internet. The subnet 192.168.177.0/24 belongs to the remote site.
Below the routing table:
Gateway of last resort is to network 0.0.0.0
C x.x.x.x 255.255.255.248 is directly connected, outside
C 10.17.10.0 255.255.255.0 is directly connected, bdi
S 10.100.132.0 255.255.255.0 [1/0] via 10.100.130.254, inside
C 10.100.130.0 255.255.255.0 is directly connected, inside
S 10.100.131.0 255.255.255.0 [1/0] via 10.100.130.254, inside
S* 0.0.0.0 0.0.0.0 [1/0] via , outside
And the result when i trace the destination:
ciscoasa# trace 192.168.177.29
Type escape sequence to abort.
Tracing the route to 192.168.177.29
1 0 msec 0 msec 10 msec
2 10.98.135.182 0 msec 0 msec 0 msec
3 62.140.145.58 0 msec 0 msec 0 msec
4 * * *
Traffic generated from a host within the local subnet (10.100.130.0/24) has no problem reaching the remote site.
As a result of this some of my bookmarks won't work either.
Similar Messages
-
Can bookmarks be protable for multiple computers? Is it an option to log on and use my bookmarks with multiple computers and locations? Thanks
Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
You can use this button to go to the current Firefox profile folder:
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
here explain how to backup profile
* https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
Here explain how to restore it
*https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile -
List Views displaying error - when using Lookup column for filtering ( which are indexed )
I'm trying to filter a large list that has more items than the list view threshold. The list has a lookup column that is indexed. If I try to filter by other columns, the view works fine as long as it returns fewer than 5,000 items. However, if
I try to filter by the lookup column, I get the error about not being able to display the items because the list is too large.
The views are returning items which are less than threshold value , but still I am seeing the same issue.I Created some pages and added this filtered views to the pages it is showing below error
This view cannot be displayed because it exceeds the list view threshold ....
IF I navigate the view in the list it's returning zero records with out any error page . But no records.
Is there a known issue with filtering large lists by lookup column? Any other troubleshooting suggestions? Everything I'm doing here is through the web interface.Thank you for your reply. Yeah it’s default limit. But when I created view based on some filter condition on lookup column it’s not working.
For example:
Created a View based on Lookup column DEPT using filter condition Dept = HR , returned 1400 items
Created another View based on Lookup column DEPT using filter condition Dept=Admin , returned 3600 items
Adding this list view webparts to the page also working fine , displaying the results .
After adding one item to this list , both the views are not displaying any results. Now the count is 5001.(it exceeded the list view threshold)
The page where the list view web parts are added throwing the below error.
This view cannot be displayed because it exceeds the list view threshold (5000 items) enforced by the administrator.
To view items, try selecting another view or creating a new view. If you do not have sufficient permissions to create views for this list, ask your administrator to modify
the view so that it conforms to the list view threshold.
Learn about
creating views for large lists.
I am experiencing this problem only with lookup columns, Choice and site columns are working fine in this same situation .
Thanks, -
How to watch movies which are located on a WD My Cloud on an Apple TV
Hi,
I have a MacBook Air, a WD My Cloud and an Apple TV.
All of my music is on my MacBook Air (just like my iTunes library), and there is not enough space to store my movies on my computer so I bought a WD My Cloud to put my movies in it.
How can I add into my iTunes library movies from WD My Cloud, so I can watch them with my Apple TV ?
Do I have to create a new iTunes library on the WD My Cloud ? Can I do it with only on library ?
ThanksSo what's the status now? Are these movies on the WD and have they been added to your library or do you just have a folder with movies on the WD?
You can add items stored on a different drive to iTunes and not have the files relocated by holding down the option key while dragging the items from the drive to iTunes. While this works it can have disadvantages, particularly when it comes to moving your files to another drive at some stage. If your external drive is not connected and you want to use iTunes to only play music you will still see a bunch of broken link symbols ! until you restart iTunes with the drive connected.
An alternative is to create a library just for movies. While some don't like this I know I only watch a particular movie only once every 5 years or so. I don't need to have it in front of me in my library all the time where it takes up a small but definite amount of resources to manage as part of my general music library. If I did feel in a movie mood I could restart iTunes with the movie library and browse that. The external drive only has to be attached when I want to use that library (I actually have 4 libraries on my computer for different purposes since some of them I don't need to see the content unless my mother in law wipes her mp3 player accidentally ).
To create a new library start iTunes while holding down the option key and tell it to create the new library on the external drive. Add media to it by dragging media to the 'automatically Add To iTunes" folder you will find in the new iTunes folder on the external drive.
All the above said, I have memory of some people complaining about certain external drive models and AppleTV. I don't have an Apple TV so I didn't bother reading or remembering them but you might want to do a web search and see if there are any issues with a WD MyCloud. -
so the movie opens and I will see movie + sound for several minutes, however then the image goes blur. School alraedy checked they do not have this problem. So probably it is a problem located on my macbookpro.
Could someone please help me.
Already installed latest version of adobe flash player and controlled my security settings of safari.
How can I check that the movie seruly opens in adobe and for instance not in JW player?so the movie opens and I will see movie + sound for several minutes, however then the image goes blur. School alraedy checked they do not have this problem. So probably it is a problem located on my macbookpro.
Could someone please help me.
Already installed latest version of adobe flash player and controlled my security settings of safari.
How can I check that the movie seruly opens in adobe and for instance not in JW player? -
How can i use cmr between two EJB which are belong to different database?
Perhaps, on the EJB's Entity tabs, in the Deployment settings dialog, you could make sure each bean references a different DB (Change the JNDI name, under Database settings).
However, I don't know this for sure - you may have to use bean-managed persistence. -
Dear experts,
I had activated the functionality of Store Business document and successfully stored documents in external server.
My client have a custom function module which is used to send emails.In that FM they used SO_DOCUMENT_READ_API1, SO_DOCUMENT_SEND_API1 function modules.They passed Instance Ident(SRGBTBREL->INSTID_B)(eg: FOL33000000000004EXT39000000000026) as export parameter to the FM 'SO_DOCUMENT_READ_API1' and get the attachment details and content.
Here my problem is I do not have entries in the table SRGBTBREL for the documents which are stored using the Store Business Document functionality and without INSTID_B I am unable to use the FM 'SO_DOCUMENT_READ_API1' to get the document details and content. Please help me to find INSTID_B for documents which are stored using Store Business Document functionality or please let me know if there is any other way to use FM 'SO_DOCUMENT_READ_API1' for documents which are stored using Store Business Document.
Thanks in advance.
Regards,
KiranHi Kiran,
You can use the following method to get the information. For example if you want to get BO documents for a customer
CALL METHOD cl_binary_relation=>read_links
EXPORTING
is_object = ls_lpor
it_relation_options = lt_relat
IMPORTING
et_links = lt_links.
then fill ls_por-instid with a customer number (KUNNR), ls_por-typeid = 'KNA1' and ls_por-catid = 'BO'.
Table lt_relat should contain a line option for each document type (for example 'I' 'EQ' 'NOTE', 'I' EQ 'ATTA', 'I' EQ 'URL', ...
In table lt_links you will get your information.
Maybe some other methods of class CL_BINARY_RELATION may also solve your issue.
Regards,
Klaus -
How to Get Resource value which are referred in code behind file using IResourceProvider
Hi Everyone,
Currently I'm working on moving the Resource file from "App_GlobalResources" to Database by using IResourceProvider. I created a CustomResourceProvider project using ResourceProviderFactory and able to get the resource values from DB which
are used in aspx page.
But i'm not able to get the values which are referring from code behind file.
Ex: Label1.Text = Resources.Common.Car; // This is still coming from resx file.
Can any one please let me know how to get the value from DB instead of resx file which are referred in cs file.
Appreciate your help.
The below code uses the ResourceProviderFactory which calls this method and gets it from DB. Please let me know if you need any more info.
public class DBResourceProviderFactory : ResourceProviderFactory
public override IResourceProvider CreateGlobalResourceProvider(string classKey)
return new DBResourceProvider(classKey);
public override IResourceProvider CreateLocalResourceProvider(string virtualPath)
// we should always get a path from the runtime
string classKey = virtualPath;
if (!string.IsNullOrEmpty(virtualPath))
virtualPath = virtualPath.Remove(0, 1);
classKey = virtualPath.Remove(0, virtualPath.IndexOf('/') + 1);
return new DBResourceProvider(classKey);
Regards, Ravi Neelam.Hi Ravi Neelam.
>>Currently I'm working on moving the Resource file from "App_GlobalResources" to Database by using IResourceProvider.
Based on this message, your issue related to web application, questions related to Asp.Net should be posted in
Asp.Net forum.
Please reopen a new thread in that forum. You will get more efficient response.
Regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have Outlook 2013 downloaded from my Office 365 account and am getting the error "The resource you are trying to use is located on an unsupported version of Microsoft Exchange". I have added all the steps I have followed so far below.
We changed over to the Office 365 hosted Exchange from 2003 Small Business Server yesterday. I have backed up my Outlook 2010 then uninstalled all Office applications and rebooted. Then downloaded the Office 2013 suite from my account
and installed it. Ran the desktop setup to "Set up your desktop applications to work with Office 365." Went to the control panel and launched the mail tool, made the
profile and named it Outlook and it auto filled with the correct info. Clicked Next and it all checked as good, but when I launch Outlook I get the error "The resource you are trying to use is located on an unsupported version of Microsoft
Exchange". I have rebooted the laptop and recreated the account three times with the same results.
Any suggestions?OK. So we solved the problem. At least in my case.
We deleted the profile again then jumped on a neighbors wifi and then ran the desktop setup from Office 365 again. Then we launched the mail setup tool, created a new profile and entered the information for the account. After this took we launched
Outlook and everything is working fine.
One thing to point out is that prior to the time that it worked, when I would create the profile and open it to set it up, it would auto fill the two available fields Name and Email Address. On the last run it didn't auto fill and I had four fields
to fill out. Name, Email Address and Password (x2).
Hope this helps someone. -
Australian. How do locate apps which are suitable for Australian use,
How do I locate applications which are relevant for Australian use, for example a shopping application; a travel application;
Do I have to do a search in itunes for the category I want, and then go and read about that application (if a website is offered).
Are the only forums for specific applications, attached to each individual application? That is, there is no one forum which deals with queries/features of applications in itunes?Apps aren't an iTunes issue, per se, since iTunes only downloads and transfers them. Try:
Installing and using iPhone applications
Installing and Using iPod touch Applications -
I'm having problems with the bookmarks, which are very unstable and almost impossible to use.
When I try to use my bookmarks and run the cursor to try to get to a folder, such as Travel, many times it just opens the one above instead. Also, when I can finally get this to open, it's very difficult to get to take the cursor across and reach the bookmark I need. It has gotten so bad that I spend a lot of wasted time.
yep... my iphone 4 also having problem like astoker.. u see on dock pin using torch light.. i found 2 pin touch each other.. i solve my problem ready.. thanks wjosten.
-
I just noticed that I can no longer select photos out of my finder that are located in my Aperture/Iphoto Library. I used to be able to attach photos to my gmail out of the aperture library in the finder and for some reason, no longer can.
I can't access these images except to go into the applications.
Also, I'd like to import my iphoto library into aperture, and move aperture library to an external drive. I tried the import first, but there wasn't enough space. Then I tried copying over the aperture library onto the external drive but it failed bc it said file was in use.
As it is, I only have 50gb left on my imac, and the aperture library is 150gb. Also, I have over 10k images in both libraries combined and there are tons of duplicates that need to be sorted, and hopefully not messed up because I've organized most of them.
So in short, I need to know how to do the following:
-select photos in finder in aperture/iphoto libraries
-move aperture library to live on external drive
-import iphoto library into aperture library
-eliminate dups but maintain organization
-moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
-live happily ever after
Thanks in advance for any support you can offer!!If you're using apps like iPhoto or Aperture then they replace the Finder for managing your photos. The point is that you use the (many) options available via these apps for the things you want and need to do with the Photos.
So, simply, you don't select the photos in the Finder. I'll append the supported ways to do this - which are faster and will yield the current version of your Photos - to the end of this post.
-move aperture library to live on external drive
Managed or Referenced Library? Managed -
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit Aperture
2. Copy the Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching Aperture. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Referenced - relocate your Masters first.
These issues are covered in the Manual and on this forum hundreds of times.
-import iphoto library into aperture library
FIle -> Import -> iPhoto Library? Have you done this already? If so are you trying to move the Masters to Aperture from an iPhoto Library? Or Consolidate them?
-moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
You can't. Every photo is in a Project. They’re the basic building blocks of the Library.
You might want to spend a little time with the manual or the video tutorials. I'm not sure you've grasped the app you've purchased.
The following is written for iPhoto, but about 97% works for Aperture too.
There are many, many ways to access your files in iPhoto/ APerture: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics. This is what you use to attach your shot to your GMail
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto/ Aperture.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto/ Aperture not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
or use this free utility Karelia iMedia Browser -
the feature you are trying to use on a network resource that is unavailable. i cannot find Quick Time.msi file anywhere. so i cannot uninstall or re install quick time
any suggestions please??????Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
How to get the Objects which are used in the webi Report.
Hi Expert,
I am trying to get the list of WebI reports and Objects which are present in the report at BO 4.0.
I can able to get details for only the list of reports and universes.
Could any one help me to get those details.
Regards,
Murali SWith 4.0, there is no longer a way to do this using just the .NET SDK because the ReportEngine SDK no longer exists for .NET. Instead, you'll have to look at using the RESTful Web Services SDK for Webi which runs in the Web Application Container Server on your report server (NOT on the web server!)
RESTful web services are platform-independent and don't require the installation of any SDK files. Everything is done through standard HTTP Get, Put, and Post commands and the results are returned in either XML or JSON format. You don't mention which service pack of 4.0 you're on, but the RESTful web services have evolved over the course of the 4.0 service packs, so more recent is definitely better.
You can find the documentation for this in the "Development Information" section at help.sap.com/bobip40. There is also a "space" on SCN for this at http://scn.sap.com/community/restful-sdk and there are some links on this page for various resources and sample code.
-Dell -
Which are function modules used to convert into XML format in SAP 4.6c Ver
which are function modules used to convert into XML format in SAP 4.6c Ver
Hi,
check this program , I think this will help you
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
data : itab like catsdb occurs 100 with header line.
data : file_location type STRING.
data : file_name like sy-datum.
data : file_create type STRING.
file_name = sy-datum .
file_location = 'C:\xml\'.
concatenate file_location file_name into file_create.
concatenate file_create '.XML' into file_create.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i.
select * from catsdb into table itab.
append itab .
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
I_XML_DOC_NAME =
IMPORTING
PE_BIN_FILESIZE = l_xml_size
TABLES
i_tab_sap_data = itab
CHANGING
I_TAB_CONVERTED_DATA = l_xml_table
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 24
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = file_create
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
write : 'INTERNAL TABLE DATA IS SUCCESSFULLY DOWNLOADED TO LOCATION', file_create .
Thanks.
Maybe you are looking for
-
Windows HP laptop won't boot Windows - possible hard disk failure!
Hi there! A month ago my HP Pavilion dv6-6b57sa completely froze mid-use, and was unable to move the mouse or get any sort of response. Naturally I held the power button to hard shutdown and restarted. Ever since then I have been unable to boot Windo
-
what's wrong with the itunes store UAE? i couldnt buy my favorite songs and movies because there's no "music" and "movies" category. please do something... thanks!
-
Please help with submitting a pdf form
I've spend the last few days (literally) searching and searching - in this forum and across the web - for a SIMPLE solution to this problem and found nothing. Actually, I have found a few posts apparently trying to do the same thing I am, but with ne
-
Can i access phone menu without a sim card in, can i access phone menu without a sim card in
hi i want to access my iphone 4 but have not yet got a working sim in it, is this possible ?
-
Problem with update of firmware for 5300
Hi, I have following problem while trying to update my firmware from version 5.51 to 7.00 on my 5300: I am connecting the phone through usb cable to PC-suite 7.0.9.2 and the update starts normally. Works fine till it reaches exactly 15%. There it shu