Use of CAC enabled sites (Smart Card Reader)

Would anyone happen to know if the PlayBook would support the use of the BlackBerry Smart Card Reader 2?
I would love to be able to access my DoD sites that require my CAC login using the BlackBerry Sled and my PlayBook. Thank you for any assistance in this matter.
BB-Soldier

Ditto!!!
I have a SCR331 and I am not able to get 10.5 to recognize my CAC card.
I do believe Leopard is recognizing and using the SCR331 but the problem
lies in the CAC Card Driver. Here are the details :
Hardware : SCR331 USB with firmware 5.22
CAC Card : Oberthur ID One v5.2
System log when CAC card is inserted into 10.5:
Nov 9 06:16:09 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (793): Protocol type of card (T=1) not supported by this driver for this type of reader (TPDU)
Nov 9 06:16:09 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (795): An APDU-level reader should be used
Nov 9 06:16:09 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (793): Protocol type of card (T=1) not supported by this driver for this type of reader (TPDU)
Nov 9 06:16:09 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (795): An APDU-level reader should be used
Nov 9 06:16:10 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (793): Protocol type of card (T=1) not supported by this driver for this type of reader (TPDU)
Nov 9 06:16:10 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (795): An APDU-level reader should be used
Nov 9 06:16:10 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (793): Protocol type of card (T=1) not supported by this driver for this type of reader (TPDU)
Nov 9 06:16:10 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (795): An APDU-level reader should be used
Nov 9 06:21:26 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/ifdhandler.c (554): GCCmdCardStatus failed
Nov 9 06:21:26 angel com.apple.SecurityServer[20]: src/CCIDDriver/USB/MacOSX/usbserial_mosx.c (974): ERR: Couldn't close device (e00002c0)
I hope Apple developers manage to fix this in put it in 10.5.1.
Thanks,
Mike Bender
Orlando, FL

Similar Messages

ACR122U smart card reader not recognized after reboot...

I am new to POS Windows and have been working with wondows for ever. I was using ACR 122u contactless usb smart card reader with windows XP and communicating with it using java with no problems. Then our I changed the OS to windows Pos ready 2009 and we found out that USB card reader has to be unplugged and plugged back in after rebooting the computer. other than the OS everything else is identicle (driver, reader, java program, ect..). Can any one tell me what could cause this problem and what I can do to solve this.
I have cheked the device manager and under USB controllers it says that it is unrecognized deivice..I tried changing the reader, changing the port and(actually the reader is pluged in to a linksys external usb hub, but changing this to a internal port did not make any difference) tried chagning some settings in control panel.
1. I checked the power option of the root usb hub.
2. Changed the driver.cab to a normal driver.cab obtained from the normal xp version. Uninstall the driver and reinstall it.
So far this hasnt been working.
I hope someone could help me with this.
~Tharanga

After extensive tests with Win 7 Embedded and ACR122U, I can confirm the same problem. It seems that reader firmware hangs and the only way to recover is to unplug and plug again the reader. We shall repeat the tests with readers from other manufacturers.
For the tests, we use a Win7 Embedded Standard PC with an ACR122U connected. We installed and configured the ACS Monitor program to start automatically with windows. We made a small utility to restart the PC every minute and we placed it on the Startup directory.
Within the first 5-10 reboots, the reader fails and the ACS monitor program shows " No reader connected" and no reaction from the reader. If we shall unplug and plug the reader again to the USB port everything works fine again.
Kostas P.

What kind of driver do I need to use for HP Elitebook 8440p RICOH Smart Card Reader?

I'm using Arch linux x86_64 and need to install Smart Card Reader, but I can't find any drivers for it.
Best regards,
Taavi

What operating system is it? Are you sure you put the card in the correct way? [not trying to be mean here]

How to configure Firefox to use cert from smart card reader on Sun Ray 3 Plus

I have a Sun Ray 3 Plus configured so the user needs a smart card to login (CAC card) and bring up a Java Desktop on the Sun Ray Server (Solaris 10 SPARC).
Now I am trying to get Firefox to read the certificate from the smart card reader but not sure how to go about doing that.
From searching online, it seems like I have to load a module in Firefox:
Edit -> Preferences -> Certificates -> Security Devices
But what file do I load? I'm assuming it is a file that's part of the SUNWut package?

I try to test bumblebee with:
optirun glxgears
but I get this error:
Xlib: extension "GLX" missing on display ":8".
Error: couldn't get an RGB, Double-buffered visual

Smart Card Reader not showing correct certificates?

Running 10.5.6 with an SCR331, G4 desktop. I have been using entourage, smart card reader, and CAC successfully for quite some time.
My CAC was recently updated with new certificates. When I insert my card reader with CAC into my machine, the keychain (and Entourage) show the old certificates which aren't even on my CAC anymore. Obviously I can't get Entourage (or other websites) to work without being able to access the new certs.
I verified the CAC & reader were good by looking at it using a windows XP machine. The three new certificates were there.
I also used another Mac (lap top) to verify the certs. I inserted my reader into the lap top, and the keychain on that machine displayed the correct certificates.
I have tried several methods of rebuilding/replacing my keychain without success. Is there another token that needs to be cleared? Any help in letting access the new certificates would be very much appreciated.
Thanks,
Bob

If you did what a lot of people did you put your certs locally and you do not need to do this. Delete them from your keychain and just in cert your CAC. Then create a "IDPref" for the DoD site you are trying to access and you should be good to go. If you need help, I have written a good "How-to" on my webblog. Just do a search for "safari and CAC".
Jonathan
<Edited by Host>

Smart Card Reader on Leopard

Has anyone tried to use a Smart Card reader and CAC with Leopard? It worked flawlessly with Tiger, but Leopard doesn't even recognize the reader is attached. I can run Parallels with XP and it immediately recognizes it works with all sites, so I know the reader is good and the USB bus is ok.
Any help is greatly appreciated.

Ditto!!!
I have a SCR331 and I am not able to get 10.5 to recognize my CAC card.
I do believe Leopard is recognizing and using the SCR331 but the problem
lies in the CAC Card Driver. Here are the details :
Hardware : SCR331 USB with firmware 5.22
CAC Card : Oberthur ID One v5.2
System log when CAC card is inserted into 10.5:
Nov 9 06:16:09 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (793): Protocol type of card (T=1) not supported by this driver for this type of reader (TPDU)
Nov 9 06:16:09 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (795): An APDU-level reader should be used
Nov 9 06:16:09 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (793): Protocol type of card (T=1) not supported by this driver for this type of reader (TPDU)
Nov 9 06:16:09 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (795): An APDU-level reader should be used
Nov 9 06:16:10 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (793): Protocol type of card (T=1) not supported by this driver for this type of reader (TPDU)
Nov 9 06:16:10 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (795): An APDU-level reader should be used
Nov 9 06:16:10 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (793): Protocol type of card (T=1) not supported by this driver for this type of reader (TPDU)
Nov 9 06:16:10 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/CCID.c (795): An APDU-level reader should be used
Nov 9 06:21:26 angel com.apple.SecurityServer[20]: src/CCIDDriver/common/ifdhandler.c (554): GCCmdCardStatus failed
Nov 9 06:21:26 angel com.apple.SecurityServer[20]: src/CCIDDriver/USB/MacOSX/usbserial_mosx.c (974): ERR: Couldn't close device (e00002c0)
I hope Apple developers manage to fix this in put it in 10.5.1.
Thanks,
Mike Bender
Orlando, FL

Blackberry Smart Card Reader Problem

I am trying to setup a Blackberry Smart Card Reader for two factor authentication. Right now I am trying to set it up with a 8300, once I get that working I will set it up with a 9000 as well.
I have succesfully paired the Smart Card Reader with the 8300.
I have a smart card from 360 Web Secure, that is supposed to be a ISO 7816 PC/SC T=0. It has been setup with 360 Web Secure software for windows logon.
When I try and turn on two-factor authentication on the blackberry (User Authenticator - Enabled), I get the error:
Unable to initialize the user authenticator, no supported user authenticator is present.
I'm guessing that my 360 Web Secure card is not actually compatible, as the Registered Card Drivers listed in the smart card settings on the blackberry are: SafeNet 330, PIV, and GSA CAC. Since I can't find any material as to wether the 360 card is compatible with these formats, it probably isn't.
I've spent hours searching the net for a card that would work and I have no idea. There are many place selling all kinds of cards, but they are all blank cards and seem to need a large enterprise software package to be able to program/manage them....
So, as an individual, where do i get a card that I can use for two-factor authentication with the blackberry smart card reader?

This smart card is not supported by the BlackBerry. You would have to write drivers for it yourself.
The only smart cards which are supported right now are the SafeNet 330, the DoD CAC and the PIV for US federal governments. The later two are actually special versions of the SafeNet 330 with some specific extensions.
If you want to use smart cards on the BlackBerry you'll therefore need to purchase a SafeNet 330 card along with all the software and hardware to initialize the card on a PC and create/import the certificate.
Hope that helps.
Chris

MS Remote Desktop and smart card reader

I have installed MS Remote Desktop Conn. on my iMac and connected a smart card reader via the USB. Although my reader energizes when the computer is on, the computer doesn't seem to recognize the reader. When I insert a CAC card into the reader and try to log in remotely, I continue to get a "username/password" box instead of the CAC PIN number. Do I need to install some kind of smart card driver or does Apple already have it? I'm at a loss as to how to fix this.

I was able to get rdesktop 1.6.0 to install on my Mac and I was able to get CAC log-in to work.
However, the installation is a little tricky. I downloaded rdesktop 1.6.0 from this link:
<<http://www.rdesktop.org>>
My instructions for installation:
1. Make sure Xcode Tools is installed on your computer. It should be on your OS X install disk.
2. Find out where your X11 libraries are located:
-From the Finder menu, selct "Go" >> "Go to Folder..."
-Type (without the quotes) "/usr/X11", and click "Go"
You should see a bunch of folders. Make sure the "include" and "lib" folders are there. Otherwise you need to find out where the X11 "include" and "lib" folders are located on your computer.
3. Download rdesktop and place the (unarchived) rdesktop-1.6.0 folder on your Desktop
4. Open the X11 application (should be in your Utilities folder)
5. In the X11 window type the following (without the quotes):
"cd Desktop/rdesktop-1.6.0 && ./configure --enable-smartcard -x-includes=/usr/X11/include -x-libraries=/usr/X11/lib && make && sudo make install"
4. Hit enter. When prompted, enter your administrator password and hit enter.
rdesktop should now be installed in the following folder:
/usr/local/bin
So, to launch rdesktop with smartcard log in enabled, open the X11 application (or Terminal application) and type the following (without the quotes, and replace your.server.address with the server address):
"cd /usr/local/bin && ./rdesktop -r scard your.server.address"
Hit enter and it should launch a new X11 window that will try to access the remote server where you should be prompted for your PIN.
To explore more options with rdesktop, open X11 and type the following (without quotes):
"cd /usr/local/bin && ./rdesktop"
Hit enter and you should get a list of options available to rdesktop.

T61/X61 integrated smart card reader

Hi,
Does anyone know if the optional smart card reader on the T61/X61 laptops are based on PCMCIA or Expresscard standards, what is the exact make and model, and if they are CCID compliant?
Thanks.

http://shop.lenovo.com/SEUILibrary/controller/e/na/LenovoPortal/en_US/catalog.workflow:item.detail?GroupID=38&Code=41N3043
Add Smart Card security technology to ThinkPad notebook computers equipped with a 54-mm ExpressCard slot. The Gemplus ExpressCard Smart Card Reader from Lenovo offers an ideal interface between a portable computer and a smart card, to control access to databases or corporate computer networks. A smart card is a plastic card that contains personalized information. It's function can range from simple data storage to more advanced memory and processing capabilities. The Gemplus ExpressCard Smart Card Reader from Lenovo is reader hardware only and does not include blank smart cards or smart card management software.
Features and Benefits:
Reads and writes(1) to all ISO-7816 compatible smart cards.
Reader hardware connects to any ThinkPad equipped with a 54-mm ExpressCard slot.
Includes drivers for Microsoft Windows 2000 and Windows XP to help get you up and running quickly.
And it's backed by Lenovo's limited warranty with renowned Service and Support available from IBM.
(1) Although this reader can be used to access any ISO 7816-compliant Smart Card, Lenovo's primary intent is to enable ThinkPad customers to integrate a security authentication application of their choosing.
have a look it is an express card version built by Gemplus, not sure about the rest.
Message Edited by wjli2 on 06-25-2008 12:42 PM

Access to smart card reader on Win 8.1 RDP Host

Hi,
I have a customer that has a couple of Windows 8.1 Pro computers, that has a smart card reader in the local keyboard.
Until a few months ago, they could RDP to the desktop computer from a RDP client such as another Windows PC, a Mac or a mobile device.
The problem is now that when accessing the desktop computer (with the smart card reader keyboard) from a RDP client, the smart card reader is not available in the RDP session anymore. This prevents them from logging on to an application in the network that
requires their smart card.
Can someone perhaps point me in a direction where this can be solved, either with the MS RDP host or with some 3rd party RDP host applications?
(Teamviewer or similar remote support applications works, but that is not what the customer want...)
Since it worked like a charm up until 2-3 months ago, there must have been some update to Win 8.1 that prevents this by default?
Thanks in advance,
/Mikael Forslund

Hi Mikael Forslund,
I am supposing you attempted to use smart card reader connected directly to Remote Desktop terminal. Basically your RDP session should redirected smart card reader to the client side and will not see readers connected to the host side
because enable Safety equipment such like smart card reader will cause highly insecure and that is not by design.
We suggest using smart card reader on local RDP client for your issue.
“The reverse is also true; if you RDP into a session from the start you will never see any local smartcard readers as Winscard will detect it’s running in an RDP session and no calls to Winscard will ever reach the local PC/SC layer –
everything will be redirected to the connecting client.”
Quote from this TechNet article
http://blogs.technet.com/b/instan/archive/2011/03/27/why-can-t-i-see-my-local-smartcard-readers-when-i-connect-via-rdp.aspx
Similar case has been posted and for your reference
https://social.technet.microsoft.com/Forums/windowsserver/en-US/47972083-b9bd-49fd-8708-b296af81bda3/usb-smart-card-reader-and-smart-card-connected-directly-to-remote-desktop-server?forum=winserverTS
Regards
D. Wu

Dc7800 "smart card reader not present" during POST

Hi,
I've got a dc7800 Small Form Factor system. It was working fine but after a reboot it won't start up normally anymore. The black POST screen appears, RAM testing starts to count up and then I see and error about "system options not set". After less than a second, a blue window in the middle of the screen displays the message "smart card authentication" and below that, "smart card reader not present".
From a bit of reading it seems like a BIOS problem but I can't figure out how to really reset the CMOS and get things working again. I've tried removing the CMOS jumper and booting the system, removing the power cord and CMOS battery for 10 minutes, and have tried putting a BIOS .bin file on a FAT32 USB key in an attempt to use the BIOS recovery option, none of which has worked.
Is there a way to do one of the following:
- force the CMOS defaults to reset and remove the configuration that requires the smart card authentication?
- force a BIOS recovery, with a key combination or by using a different jumper or jumpers on the motherboard?
I see various other jumpers and pads on the motherboard like "ROM RCVRY" and the E15 Boot Block Recovery Header but scant information about how these might be used to solve the problem.
It seems to me that the hardware is fine as it powers up and displays the POST screen. It's like a BIOS setting has been reset to require a smart card, even though there isn't one, nor even a smart card reader, in the system.
Any advice would be greatly appreciated.
TIA,
JS

Hi:
After doing some research on the message, I came across this post.
I guess your PC has a smart card optional system.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/DC7800-smart-card-athentication/m-p/10691...
Now, if you can get into the BIOS menus, if you look at the top of page 8, you will see what you need to do in order to enable/disable the smart card reader message.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01162201/c01162201.pdf
Whatever the problem is, it is a security setting issue, and clearing the CMOS or updating the BIOS will not have any effect on that setting.
Unfortunately, I have no experience with the security settings or protect tools software on HP business PC's.
I have a dc7800 (and only use HP business desktops and notebooks), so I am very familiar with all the other aspects of the PC but that one.
You may want to post your issue on the HP business support forum, business PC section. Hopefully someone there has experience with turning this feature on or off.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.Uk2rcJAo69I
You may also want to log in and reply to that post, but don't get your hopes up that it will be answered.
RichS hasn't replied to a post in 3 years. Although someone else may.
Good luck, and please post back if you find the solution to the problem.

Pkcs#11 and smart card reader

Hi everybody,
In my applet code
i'm trying to implement "attached signature" reading keystore from a smartcard.
I'm using SunPKCS11 provider and infocamere smart card, so i load SunPKCS11.dll for PKCS#11 standard.
my code is:
String pkcs11ConfigFile = "c:\\smartcards\\config\\SI_PKCS11.cfg";
Provider pkcs11Provider = new sun.security.pkcs11.SunPKCS11(pkcs11ConfigFile);
Security.addProvider(pkcs11Provider);
where SI_PKCS11.cfg file contains 2 lines like follow:
name = test
library = C:\WINNT\system32\SI_PKCS11.dll
when I try to sign without smart card in the device reader i catch "PKCS#11 not found" exception, while when I try with smart card inside the device the applet stop on loading the provider and it doesn't continue without any errors in java console. Can anyone help me?
thanks a lot for every answer
best reagards

I should add that I am using Windows 7 and my CSS version is 8.3, I can also verify my smart card works for other applications, only thinkvantage CSS 8.3 does not work.

T450s -- Display, NGFF SSD, Smart Card Reader, and m.2 SSD slots

I'm looking to order a T450s and have a few questions about options when configuring the order:
1080 Display -- Does anyone know if the 1080 display (non-touch) is made by LG or AUO or someone else? There was extensive discussion about the T440s, and people got different brands and the AUO was the preferred brand.
16GB m.2 NGFF SSD -- If I remove this option, and want to add a 3rd party compatible NGFF SSD later, can I do this?
3rd m.2 SSD Slot -- The options are None, 3rd m.2 SSD slot, or Smart Card Reader. If I select the Smart Card Reader option, can I later remove the Smart Card Reader and use it as a 3rd m.2 SSD slot? Or, if I select 3rd m.2 SSD slot and later want to use it for a Smart Card Reader, can I buy a Smart Card Reader and plug it into the slot?

Lenovo uses different FHD diplays for the T450s: one by AU Optronics and the other by LG Display.
However, the T450s uses a different LG display than the T440s. The LG screen of the T450s ("
LP140WF3-SPD1") seems to be much better than the LG screen of the T440s.
If you remove the 16GB M.2 SSD option, you can add a M.2 SSD later.
If you have a device with two M.2 slots, you can't use a M.2 SSD and WWAN at the same time.
If you have a device with three M.2 slots, you can only use single-sided M.2 SSDs in the third M.2 slot.
Both the SmartCard reader and the third M.2 slot are attached to the mainboard via a flexible flat cable.
If you choose the SmartCard reader, the warranty might be lost if you want to use the third M.2 slot, because you have to replace some parts that aren't so-called CRUs (consumer replaceable units).

Compaq 6910p Smart card reader and a sim care

I have a compaq 6910p laptop, what is a Smart card reader and the sim card use for

Hey marionholt,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
I worked on behalf of HP

Blackberry Z10 and Smart Card Reader Battery Life

We have several users with new Z10s using Smart Card Reader 2. After activation with BAS10, users state the Smart Card Sled battery life has dramatically decreased from the old setup with 9930s on BAS5. One user states he can have it fully charged at work and it will be dead by the time he gets home.
I searched around a bit, and haven't found anyone else reporting this issue. Any ideas what might be causing this?

Hi my two Z10 don't have this issue, what OS version are you running? The newer version should have fixed the battery issue.

Use of CAC enabled sites (Smart Card Reader)

Similar Messages

Maybe you are looking for