Use of CCP on a terminal server

I would like to use Cisco Configuration Professional CCP on Windows Terminal Server, which is accessed via RDP. This server is shared by several network administrators and is used to administer our network devices.
How do I configure CCP, so that
a) more than one user can start it at the same time
b) username and password in a community are not the same for every user (you don't want a colleague of yours to make use of this software using your account)

Ah,
Most excellent, I will have ZFS in July when I upgrade my ZFD to full
Zenworks suite.
Thanks!!!
Merrell
"Marcus Breiden" <[email protected]> wrote in message
news:[email protected]..
> On Wed, 04 May 2005 04:49:20 GMT, Matt Merrell wrote:
>
>> I have a Windows 2003 server, and I am probably correct in assuming that
>> you
>> can't use Zenworks to remote control it? It seems the bulk of the
>> ZfdAgent.msi install options are not available when installing it on a
>> Win2k3 box.
>
> yes.. you need ZSM for that...
> --
>
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Similar Messages

Using 2 application on 1 terminal server

Hi ,
I have 2 application running on my terminal server . and in terminal server you can only run 1 application on login , how to setup the terminal sever to boot 2 application and the user choose with one he want to use .
is it the best way to create a group policy and stop everything and on the desktop and just keep the 2 icons .
if there is any solution please let me know
Joseph Dargham

Hi,
I think a remote application being published is the best way to tackle this. That way you can publish the application to a web page, or to the users start menu, and they can select it, it will then launch only that application. The user can run multiple
applications simultaneously this way too.
Are you using 2012? If so check out this resource
http://ryanmangansitblog.wordpress.com/2013/03/16/rds-2012-publishing-a-remoteapp/
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Using Cisco Router as terminal server

Dear Experts,
I would like to use Cisco 2800 Router as terminal server. I use 2T-WIC (Serial) in asynchronous mode, while the remote computer connects to router's port by dial up, using PPP protocol get IP address and access the network. What configuration should be set in router in order to implemented such service. Should any authentication be implemented and if so, what is the right setup?

Hi
From your explaination, I assume that you want the router to be a dial-in access server for your HARDDISK client (not diskless).
username cisco password cisco
int e0
ip add
interface Serial 0
physical-layer async
ip unnumbered Ethernet 0
async mode dedicated
dialer rotary-group 1
interface Dialer 1
ip unnumbered Ethernet 0
encapsulation ppp
dialer in-band
dialer-group 1
ppp authentication chap
peer default ip address pool test
ip local pool test
line 1
exec
autoselect ppp
autoselect during-login
login local
modem InOut
transport input all
stopbits 1
speed 38400
flowcontrol hardware
Hope that will help.
Pls rate helpful posts.
Regards
JD

Running Forms on oracle Application 10g(9.0.4) on terminal Server

oracle application Server Installation guide for windows states that
Oracle Application Server is not supported on Windows operating systems that
include Terminal Services (for example, Windows NT Terminal Server Edition and
Windows 2000 with Terminal Services are not supported).
My Remarks : It means Oracle Application server cannot be installed on the Windows server on which Windows Terminal Services are on.
Please consider the following deployment scenario
Server 1
OS : Windows 2000
Software Installed : Oracle Database 10g
Server 2
OS : Windows 2000
Software Installed : Oracle Application Server 10g(9.0.4) on which Forms and Reports are deployed
Server 3
OS : Windows 2000 as Terminal Server
Software Installed : IE 6.0 , that will act as Client Machine.
I have following Queries
1. Oracle does not allow OAS installed on Terminal Server, will it allow Terminal Server( Server 3) to act as Client and to run web base forms and reports on it.
2.
In case It allow to run forms and reports on Terminal Server ( Server 3) does it means thin client machines connected to Terminal Sever can access Forms and Reports.
Thanks and Regards,
Ankur Diwan

The bottom line is that we don't certify running Forms using the features of a terminal server to serve up any part of those Forms. That doesn't mean it does not work, but its not certified or supported.
Regards
Grant Ronald
Oracle Product Management

Outlook 2010 Pro Plus not showing Retention/Archive Policies only on Terminal Server

I have Office 2010 Pro Plus (Terminal Server License) installed on Remote Desktop Services 2008 R2 and running Outlook 2010 against Exchange 2010 SP1 with Enterprise CALS for all users. If I run Outlook locally on a PC (not TS Client)
I have apply folder retention policies and archival policies no problem but if I open Outlook on Terminal Server I cannot. Everything is greyed out. This is the exact same version of Outlook, just different keys but I can't apply any policies for
the Terminal Server users.
So, to clarify, on a regular PC, I can click an Outlook folder, click on the "Policies" button on the ribbon and have retention policies as well as Online Archive settings as I should but when I use the same version on Terminal Server
the Policies button is greyed out completely and cannot set. I am NOT using auto-archive settings and not using PST files, only Online Archive.
Thank you

I think you are in the wrong forum - OCI questions (as opposed to OCI) should go here:
Oracle Call Interface (OCI)
Best of luck

Outlook integration on terminal server

Hi Experts,
I am facing Outlook Integration problems with one of our clients who uses outlook integration on their terminal server for about 10 users. They were on SAP 2007A SP00 PL47 and using outlook integration on terminal server for about 10 users without any problems.
I recently upgraded them to SAP 2007A SP01 PL7 and after that there are add-on initialization errors on the terminal server with outlook integration and payment add-on. The add-ons are installed and working OK on application server and other client machines.
On the terminal server;
1. Initialization of add-ons failed giving "Initialization Failed" error. I tried to reinstall add-on on Terminal server but same result.
2. When trying to logon to SAP within Outlook; system gives ""XYZ" is not a valid company name" error and login fails.
Any help on this will be highly appreciated.
Thanks in advance
Regards
Dave
Edited by: Devinder Sareen on Feb 23, 2010 6:34 AM

Can anyone on the forum shed any light on this subject please?

Running LabVIEW applications on Windows Terminal Server

I have built a client application in LabVIEW that one of our users want to run on a Windows 2000 Terminal Server...the question is; how does Windows Terminal Server handle the different sessions; does is launch multiple copies of the application and if so how about support files? In my case the client application has a configuration and a temp file in it's directory...if multiple users use the application on the terminal server; does it or can it be set up to make one copy of the app directory for each session? If not - is there a way / what is the best way to get separate configurations and temp files for each session?
MTO

You have a better chance to get a helpful reply if you ask in the Acrobat forum, or even at http://forums.adobe.com/community/licensing

Hydra (Windows Terminal Server) and Forte

Is anyone aware of any attempts at using Forte with the windows
terminal server software. I am interested in the possibility of using
the terminal server concept for applications which are more of the
"heads down data entry" type. The cost of a typical PC client (even a
"thin" one) is not easily cost justified in these cases.
It seems to me that using the terminal server concept would
potentially be a lower cost approach to providing a Forte client in
this type of application.
If anyone has any thoughts or experience on this I'd appreciate
hearing about it.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Frank,
I dont know much about citrix and SBO (just see a presentation at the techsummit), but I will start here , and then go on here .
In the Citrix forums are some issues related to yours:
http://support.citrix.com/isearch.jspa?searchQuery=sapbusinessone&searchForums=true
Hope helps,
Ibai Peñ

This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on a terminal server

Hi All,
I have Citrix VDI (Virtual Desktop Infrastructure) Implemented
in my company and installed few Applications on App Server lets say.... MS Office 2013, filzialla, putty, etc...
I assigned these apps to the users through CITRIX STUDIO, when I try to use these apps. on VDI everything is working fine only when i tried to open Word, Excel or Powerpoing, outlook it throws error as
""This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on
a terminal server"" and apps gets closed.
Please help me on this ASAP.
Thanks & Regards,
Sachin Shinde

Hi,
As mentioned in ths article below, run for Office 365 products on to a Remote Desktop Session Host server is not supported. You can install Office products for Office 365 to a virtual desktop, but the virtual desktop must be assigned to a single user.
http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx
Regards,
Melon Chen
TechNet Community Support

Windows 7 Pro 64-bit to be used as a terminal server

Hello,
I'm looking at using a Windows 7 Pro 64-bit PC as a Terminal Server using an application such, as ThinStuff XP/VS (www.thinstuff.com), to manage the RDP connections. Based on everything I've read, it looks like there's no Terminal Server CALs available
for purchase through MicroSoft, so is there a need to worry about licensing? Each PC that connects will have it's own Windows 7 Pro valid license and, of course, the PC to be used is also valid. Are there any licensing concerns I should have?
Thank you for your help!

Hi,
To set up a terminal server, I suggest to set up a windows server system, Since Windows 7 is a client operating system and I do not suggest to use a third part software to modify its roles, especially the role or function related to the license. As for your
license concern, you can refer to the license agreement below Select your product name, version and language:
http://www.microsoft.com/en-us/legal/intellectualproperty/UseTerms/default.aspx
Regards
Wade Liu
TechNet Community Support

Installing terminal server role on windows server 2012 to use for Windows server 2008 R2 machines.

Dear
Our current setup is as follows :-
Active Driectory is in Windows Server 2003.
Citrix Xenapp version 5.6 with all Xenapp servers in Windows Server 2003
Now we are upgrading our Citrix farm to 6.5 and all Xen app servers into Windows Server 2008R2.
We did the configuration and testing; everything works fine except the terminal server is not configured which gives the pop always for the expiry date.
We do have license for 2012 terminal server which is not possible to downgrade for some reason and managent need to install new Windows Server 2012 for terminal server and activte the licenses.
My question is :-
1 Whether Windows Server 2008 R2 will get RDS cal license from Windows Server 2012 terminal server (RDS CAL license is of windows server 2012).
2. What is the role and features I need to activate in Server 2012 in order to use for Citrix 6.5 (only applicable fetaure for getting the RDS cal license.)
3. Whether I can add this 2012 server into domain. Is it possible to add 2012 server into Windows Server 2003 AD.
Your early reply is highly appreciated.

Thanks Jeremy..
I got exactly the right answers I am lookoing for ..
I successfully activated the terminal service on the newly created Windows 2012 Server and installed the retail license pack we had of 50+50+25 keys . It later shows the 125 keys successfully applied.
when I tried to link the Xenapp (Windows Server2008R2) to the license server, it first gives me error that session host service role is not installed on the ternial server. So I installed that role also in the terminal server.
But now its anothee error as below.
RDS Cals are not available for this Remote Desktop Session host server, and licensing Diagnostic has identified licensing problems for the RD session host server.
1. Is it wrong I did by installing session host server role into the terminal server (but really it gave me error like 'session host server role is not running on the license server' when I tried to link the license server).
2. Is it the problem that Windows Server 2008 R2 will not get license from 2012 RDS CAL license.
3. whether Clearing house will take time to update the license.
Your reply is highly appreciated. I need to know whether any other way I can link the Windows Server 2008 R2 Servers (Xenapp) to the license server.

Use batch file to determine if computer is a terminal server

Hello experts,
I am trying to create a batch file that I can use to install MS Office 2013 and another software on Windows Server 2003 R2,
Windows Server 2008 R2, and Windows Server 2012 terminal servers (Remote Desktop Services) via GPO. The installation files are NOT
"msi" files. Can you please tell me how I can use command line in a batch or script file to determine if a machine is a terminal server or not? I tried the Change user /query command on a Windows Server 2008 R2
terminal server and a Windows 7 machine and both machines returned the following status
Application EXECUTE mode is enabled.
which will be a problem because the installation batch file would treat the Windows 7 machines as a terminal server when it's not really a terminal server.
Basically, I want the batch file to check to determine if the machine is a terminal server. If it is a terminal server, then it would run change user /install, install the software, reboot server, then run change user
/ execute. Your help will be greatly appreciated.

Hi,
For Office 2013 there should not be any concerns since it is windows installer based and things will be handled automatically. For the other software you could simply put the session in install mode in every case. For the servers/workstations
where install mode doesn't apply the change user /install and change user /execute will simply fail without any harmful effects.
You may check whether or not the machine is a terminal server using WMI, for example:
wmic /namespace:\\root\CIMV2\TerminalServices PATH Win32_TerminalServiceSetting Get TerminalServerMode
0 = Remote Administration mode (not a RDSH/TS)
1 = Application Server mode (aka RDSH/Terminal server)
-TP
When I run the command from the command line, it works, but when I try it in a "IF" statement, nothing happens. I am I doing something wrong using the wmic code in the IF statement?

2611xm Terminal Server + ACS + duplicate login when using menu options

Hi,
I'm trying to set up ACS on my 2611xm router, so far I have been able to do this, however when you login,
I have a autocommand setup to run a menu. My problem is when you select the option on the menu it
reauthenicated against the router again before connecting to the line, can any one tell me how to stop this from happening.
Thanks for your time and effort in advance, I have enclosed a config below.
DDRAS01#sh running-config
Building configuration...
Current configuration : 6854 bytes
! Last configuration change at 10:28:49 AEST Sun Feb 21 2010 by <removed>
! NVRAM config last updated at 19:25:53 AEST Sat Feb 20 2010 by <removed>
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service linenumber
service sequence-numbers
hostname DDRAS01
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200 informational
logging rate-limit all 10000
logging console critical
enable password 7 <removed>
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication login if_needed local
aaa authentication enable default enable
aaa authentication ppp default local
aaa authorization exec default group tacacs+ local if-authenticated
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa session-id common
clock timezone AEST 10
clock summer-time AEST recurring last Sun Oct 2:00 last Sun Mar 3:00
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
ip domain list <removed>
ip domain list <removed>
ip domain name <removed>
ip host dd-cr-01e 2033 172.16.1.1
ip host ddsws01 2034 172.16.1.1
ip host ddsws04 2035 172.16.1.1
ip host ddce565 2040 172.16.1.1
ip name-server <removed>
ip name-server <removed>
username netops privilege 15 password 7 <removed>
ip ssh source-interface FastEthernet0/0
ip ssh logging events
ip ssh version 2
interface Loopback0
ip address 172.16.1.1 255.255.255.255
interface FastEthernet0/0
ip address <removed> 255.255.255.0
speed 100
full-duplex
interface Serial0/0
no ip address
shutdown
interface BRI0/0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 <removed>
ip http server
no ip http secure-server
ip tacacs source-interface FastEthernet0/0
ip radius source-interface FastEthernet0/0
logging facility local6
logging <removed>
snmp-server community <removed> RO
snmp-server community <removed> RW
snmp-server location <removed>
snmp-server contact NetOps
menu ddras01 title ^C
Cisco Terminal Server
Select the number from the list below
Use 'ctrl+shift+6' then 'x' to switch back to the menu
^C
menu ddras01 text 1 Connect to DD-CR-01
menu ddras01 command 1 resume dd-cr-01 /connect telnet dd-cr-01 2033
menu ddras01 text 2 Connect to DDSWS01
menu ddras01 command 2 resume ddsws01 /connect telnet ddsws01 2034
menu ddras01 text 3 Connect to DDSWS04
menu ddras01 command 3 resume ddsws04 /connect telnet ddsws04 2035
menu ddras01 text 8 Connect to DDCE565
menu ddras01 command 8 resume ddce565 /connect telnet ddce565 2040
menu ddras01 text 9 Exit
menu ddras01 command 9 menu-exit
menu ddras01 clear-screen
menu ddras01 status-line
menu ddras01 line-mode
tacacs-server host 10.2.0.50
tacacs-server directed-request
tacacs-server key 7 <removed>
control-plane
privilege exec level 15 write terminal
privilege exec level 15 write
privilege exec level 1 ping
privilege exec level 10 undebug ip icmp
privilege exec level 10 undebug ip
privilege exec level 10 undebug all
privilege exec level 10 undebug
privilege exec level 10 terminal monitor
privilege exec level 10 terminal
privilege exec level 15 show running-config
privilege exec level 5 show configuration
privilege exec level 5 show
privilege exec level 10 debug ip icmp
privilege exec level 10 debug ip
privilege exec level 10 debug all
privilege exec level 10 debug
privilege exec level 10 clear interface
privilege exec level 10 clear counters
privilege exec level 10 clear
line con 0
password 7 <removed>
logging synchronous
line 33 64
no exec-banner
exec-timeout 0 0
no activation-character
no exec
transport preferred telnet
transport input all
escape-character 27
stopbits 1
flowcontrol hardware
line aux 0
line vty 0 4
password 7 <removed>
logging synchronous
autocommand menu ddras01
line vty 5 181
password 7 <removed>
logging synchronous
autocommand menu ddras01
ntp clock-period 17208487
ntp source FastEthernet0/0
ntp server <removed>
end

Hi,
I'm trying to set up ACS on my 2611xm router, so far I have been able to do this, however when you login,
I have a autocommand setup to run a menu. My problem is when you select the option on the menu it
reauthenicated against the router again before connecting to the line, can any one tell me how to stop this from happening.
Thanks for your time and effort in advance, I have enclosed a config below.
DDRAS01#sh running-config
Building configuration...
Current configuration : 6854 bytes
! Last configuration change at 10:28:49 AEST Sun Feb 21 2010 by <removed>
! NVRAM config last updated at 19:25:53 AEST Sat Feb 20 2010 by <removed>
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service linenumber
service sequence-numbers
hostname DDRAS01
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200 informational
logging rate-limit all 10000
logging console critical
enable password 7 <removed>
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication login if_needed local
aaa authentication enable default enable
aaa authentication ppp default local
aaa authorization exec default group tacacs+ local if-authenticated
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa session-id common
clock timezone AEST 10
clock summer-time AEST recurring last Sun Oct 2:00 last Sun Mar 3:00
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
ip domain list <removed>
ip domain list <removed>
ip domain name <removed>
ip host dd-cr-01e 2033 172.16.1.1
ip host ddsws01 2034 172.16.1.1
ip host ddsws04 2035 172.16.1.1
ip host ddce565 2040 172.16.1.1
ip name-server <removed>
ip name-server <removed>
username netops privilege 15 password 7 <removed>
ip ssh source-interface FastEthernet0/0
ip ssh logging events
ip ssh version 2
interface Loopback0
ip address 172.16.1.1 255.255.255.255
interface FastEthernet0/0
ip address <removed> 255.255.255.0
speed 100
full-duplex
interface Serial0/0
no ip address
shutdown
interface BRI0/0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 <removed>
ip http server
no ip http secure-server
ip tacacs source-interface FastEthernet0/0
ip radius source-interface FastEthernet0/0
logging facility local6
logging <removed>
snmp-server community <removed> RO
snmp-server community <removed> RW
snmp-server location <removed>
snmp-server contact NetOps
menu ddras01 title ^C
Cisco Terminal Server
Select the number from the list below
Use 'ctrl+shift+6' then 'x' to switch back to the menu
^C
menu ddras01 text 1 Connect to DD-CR-01
menu ddras01 command 1 resume dd-cr-01 /connect telnet dd-cr-01 2033
menu ddras01 text 2 Connect to DDSWS01
menu ddras01 command 2 resume ddsws01 /connect telnet ddsws01 2034
menu ddras01 text 3 Connect to DDSWS04
menu ddras01 command 3 resume ddsws04 /connect telnet ddsws04 2035
menu ddras01 text 8 Connect to DDCE565
menu ddras01 command 8 resume ddce565 /connect telnet ddce565 2040
menu ddras01 text 9 Exit
menu ddras01 command 9 menu-exit
menu ddras01 clear-screen
menu ddras01 status-line
menu ddras01 line-mode
tacacs-server host 10.2.0.50
tacacs-server directed-request
tacacs-server key 7 <removed>
control-plane
privilege exec level 15 write terminal
privilege exec level 15 write
privilege exec level 1 ping
privilege exec level 10 undebug ip icmp
privilege exec level 10 undebug ip
privilege exec level 10 undebug all
privilege exec level 10 undebug
privilege exec level 10 terminal monitor
privilege exec level 10 terminal
privilege exec level 15 show running-config
privilege exec level 5 show configuration
privilege exec level 5 show
privilege exec level 10 debug ip icmp
privilege exec level 10 debug ip
privilege exec level 10 debug all
privilege exec level 10 debug
privilege exec level 10 clear interface
privilege exec level 10 clear counters
privilege exec level 10 clear
line con 0
password 7 <removed>
logging synchronous
line 33 64
no exec-banner
exec-timeout 0 0
no activation-character
no exec
transport preferred telnet
transport input all
escape-character 27
stopbits 1
flowcontrol hardware
line aux 0
line vty 0 4
password 7 <removed>
logging synchronous
autocommand menu ddras01
line vty 5 181
password 7 <removed>
logging synchronous
autocommand menu ddras01
ntp clock-period 17208487
ntp source FastEthernet0/0
ntp server <removed>
end

After using WMIquery to listen Creation/Deletion of one process makes CPU usage to 100 % at remote terminal server

Hi there ,
I am new to the WMI and stuck with max CPU usage .
I have to open my plugin(MakeyourVoice.exe )
as MyAPP.exe process starts by a windows user. For hearing
the start of MyAPP.exe in processes space ,I have created the WMIquery in watcher.exe and query
used as
scope =
new ManagementScope(String.Format("\\\\{0}\\root\\CIMV2", “localhost”),
null);
scope.Connect();
wmiStartQuery =
new
WqlEventQuery("__InstanceOperationEvent",
new TimeSpan(0, 0, 1),
"TargetInstance ISA \"Win32_Process\" AND TargetInstance.Name=\"MyAPP.exe\" ");
ManagementEventWatcher StartWatcher =
new ManagementEventWatcher(scope, wmiStartQuery);
// register for WMI event within the scop
StartWatcher.EventArrived +=
this.WmiEventHandler;
// Start Watcher
StartWatcher.Start();
Now the problem is if I run my watcher process in Remote Terminal Server (Windows Server 2008 R2 Standard) with 5-6
number of users logged in the CPU usage shoot up to 100 %.Due to this users cannot do any activity on system.
Could you please suggest how can I solve this issue, so that users can use my plugin?
Thanks in advance..

Hi Sharma,
Please seek help from
Scripting forum or else wait until any of our moderator move this post to concerning forum.
Thank you for understanding.
Regards, Ravikumar P

Terminal Server using NM-16A

Hello,
I was trying to set terminal server using NM-16A module in Cisco 2651XM router but no luck. I did use 2511 in the past without any issue but i don't know if i'm not doing anything wrong with this module as i never set terminal server with this module before. Initially i thought my NM-16A is bad but when i do "sh ver" then router shows 16 Terminal Lines. All i get connection refused by remote host when i try to console other device even after clearing lines. Can anyone please help?
Thanks,

You may want to take a look at this doc:
http://www.cisco.com/en/US/docs/ios/interface/configuration/guide/ir_nm16as.html
It has been a while since I have used the async interfaces on a 25xx series device. I have used the async mod on a 2600 and aside from setting baud rate, parity, etc. I don't recall any special issues. I have one in my lab now, but apparently I have misplaced my async octopus cables. Which is a bit disconcerting.
Anyway, hope that helps.
Regards,
Bill
Please remember to rate helpful posts.

Use of CCP on a terminal server

Similar Messages

Maybe you are looking for