Use of Condition update while creating Condition Records

Hi Experts,
I have to maintain MRP for a product which will be applicable for only 1 particular order. after which system should pick up old MRP.
By using CONDITION UPDATE feature , i have tried to do it , but once maintained , its always picking new MRP for every order.
(If it being a record where only new price to be defaulted in one order and no need to create 2nd order , this is ok ., but not in my case)
Can any one suggest me how to go with this
Thanks in advance,
Jignesh

Hi,
This can be done using the CONDITION UPDATE
In the condition type check the CONDITION UPDATE AND SAVE IT
While creating the CONDITION RECORDS, maintain the values and click ont he ADDITIONAL DATA (F7) then maintain the value in the field MAXIMUM NUMBER OF ORDERS , PUT The sales order as 1.
Then try
Please revert if you need further details
thanks,
santosh

Similar Messages

Getting error while creating condition type in SPRO

Hi ,
can somebdy tell me why i am getting the following error while creating condition type in SPRO
No valid change license available for message /sapcnd/
and also while rule determination using condition type we are getting the following error.
system error:system cannot read the structure for table
reg
venkat

Hi Venkat,
Do you have the error number code!?
Regards,
Michel Bohn

Error while creating absence record in PA30 using 2001 infotype

Hi all,
iam getting an error while creating absence record for infotype 2001for LOP(unpaid)
error : No quota available for att./abs. 6000 for pers. no. 61000052 between 31.12.2009 and 31.12.2009
i have did
Create a absence type LOP
Determine Entry Screens and Time Constraint Classes
Define Counting Rules
Assign Counting Rules to Absence Types
Payroll: India>>Absences>Describe Absence Valuation Rules 01 Unpaid Leave
Group Absences for Absence Valuation>>Absence valuation rule>>F4 country grouping 40>> assign 01Unpaid Leave
please solve this

Actually I don't know how your system is configured.
However, the error you're receiving seems you have assigned the absence type to a quota type.
Please go to your counting rule and check whether Deduction rule - absence quotas - within entitlement field is filled.
If yes, get the deduction rule value and go to
SPRO Time man- Time data rec - Absences - Absence Cat - Abs counting - rules for counting (new) - deduction rules for abs quotas and check the quota type in here.
If there is a quota assignment in place, before creating an IT2001 you need to create a IT2006 for that specific time period.
Or, you need to delete the quota assignment via two config steps mentioned above.
Regards,
Dilek

While creating info record mandatory fields are disable .

hi all,
while creating info record some mandatory fields are disable (valid to) in condition what i can do to procede further?
how i fill data in that field?

Hello,
I think that is set as a mandatrory field. You can give any values in days here. Enter 1 or 2 and proceed.
Prase

Issue while Creating the records in OAF by disabling one field.

Hi Experts,
I am having the scenario like this.
From the OAF page I want to create the record by omitting one field(it is disable for OAF).
Consider the folowing scenario..
I am having the following fields Empno,Empname,Salary,Job in the OAF page where I made the Job field alone as disable and the style i am using for job field is message text input and i have set the initial value as 'Manger'.
I am facing issue while creating the records in OAF page without the job filed value ie 'Manager' then the records were not inserted into my tables. Whereas if I enable the job field in OAF page(meaning I gave the job as 'Manager' in OAF page) I am able to create the records from OAF page and able get inserted in the database.
Could Anyone can suggest where I fail as it is my Priority issue.
Any Suggestion will be a great help for me.
Thanks,
Murugesh.

or you can default it in the controller by handling add row event
if(vo.hasNext())
vorow = vo.next();
vorow.setAttribute("xxxx",3838);
--Prasanna

I am unable to use services for objects while creating a PO

Hi All,
I am unable to use services for objects while creating a PO ie in me21n / Me22n .
Our client wants to attach some doucument along with the PO, we want to use services for object for this. I use this services for objects in admin level , but unable to use this at user level.
System gives the following message
No service available
Message no. SGOS_MSG002
Regards
Gsg

Hi,
Refer the following OSS notes 552127, 598073
For getting Object for services icon in ME21N and ME51N refer OSS note 913251

Tables updated while creating order, before saving

hi friends,
Please provide list of tables updated while creating the order, before saving it.
regards,
vandana arora

Hi
The following tables get updated
VBBE - Sales Requirement
VBLB - Release Order Data
VBAK - Sales Document Header
VBPA - Partner Table
VEPVG - Delivery Due Index
VBAP - Sales Document Item Data
VKDFS - SD Index: Billing initiator
VAPMA - SD Index: Order Item by Material
VAKPA - SD Index: Order Item by Partner Function
VBEP - Schedule Line
VBKD - Sales Doc: Business Data
VBEH - Schedule Line History

Error while creating condition record

Hi
Am using 4.7 and creating condition record while saving condition record am getting error NO UPDATE SERVER FOUND FOR CONTEXT E, So am stuck up and do not know whom to contact is it error for BASIS? or related with SD kindly help.
Thanx

Hi Mukesh
As you are getting error NO UPDATE SERVER FOUND FOR CONTEXT E, while saving the condition record, kindly consult your BASIS consultants and ask them to check wheather the pricing related tables and structures have been copied and uploaded properly or not.
Regards
Srinath

Multiple (and quite too much) lines in konp while creating condition record

Hi,
i'm trying to create a webdypro application to maintain prices and conditions for materials.
Therefore I'm using the FM RV_CONDITION_COPY.
If I create a condition (i.e. with Condtype ZPR0) the FM creates many lines in KONP for every other condition maintained (Z***) in customizing. Any ideas ?
Is there perhaps another way to create conditions ?
The FM MUST be working dark !!!
Big Thanks

Hi
U can try to use the BAPI BAPI_PRICES_CONDITIONS
Max

How to manual maintain TAX condition value while creating sales order

Hi
I am creating one Tax condition suppose JLST without access sequence .
while creating sales order I am manually maintain the % value of TAX. suppose it is 1%
then I see It show some value in TAX .
save that sales order & creating delivery document for that but when I create Invoice its show error.
" Tax code in procedure CMTAXP is invalid ".
I know the configuration only for Tax condition with vk11 condition record .
BUT now I want to maintain TAX condition at the time of creating sales order.
so I remove the access sequence of that condition .
but It shows tax code error while billing.
My main question is that If i maintain condition record while creating sales order then how i can assign Tax code .
Can it is possible ?
if yes then How?
please help me.
thank you

Hi,
The "straight-forward" answer for Tax Code creation is contact the FI consultant. He shall help you, by creating Tax codes.
I have tested, with creating a tax cond type (copy of MWST) & manually entering values. I can create Sorder, Dlv and Bill but I cannot create an Accounting document. That is because of every line (amount) a Tax code is necessary.
I THINK, you can NOT have manually filled tax codes; access sequence is needed to get the tax value (%) and the Tax code from the condition record.
There is lot of material on the web to understand Tax classification, code etc. etc. See a useful link below -
http://www.sapgeek.net/2010/04/sd-determines-tax-code/
In short Tax code is a must and take the help of your FI consultant for the configuration of the same.
BTW - Tax code is already made created for MWST, therefore I suggested that you can use MWST. Furthermore, you can change the values corresponding to Tax codes in FTXP.
But if you are a beginner in these things, better take help.

BAPI_PO_CREATE1 condition type are creating duplicate records

Hello Experts,
Currently I am creating Purchase orders using BAPI_PO_CREATE1 . When I am passing Condition related records to the same BAPI , second line item onwards , it creates multiple records of same condition type .
I have also looked into threads in SDN for the same , and they have suggested to create PO using BAPI_PO_CREATE and later use BAPI_PO_CHANGE to pass condition records. I have tried the same , but still second line item onwards it creates multiple records. Please tell me how do I resolve this issue.
Thanks
Trishna

Hello All,
This duplicate condition record creation may happen due to a setting in the MM configuration, where the system tries to pull in the history condition records ,based on the same set of condition record determination parameters.
Please contact the MM functional consultant in your team for settings change in detrmination of condition records under " MM-Purchasing " section.
Best Regards,
Kumaar.S

Call the webdynpro appl while creating one record using itemDetail iView

Dear Expert,
I have one scenario where in the user want to create one record in MDM table using itemDetai iView. When the user clicks on one custom button in this itemDetais iView say validate one webdynpro applicatio should be called and this applicaiton should validate the user input depending on business requirement.
Thanks and Regards,
M.D.Sahu

thanks John for your valuable input.
In my requirement user don't want to touch the MDM repository or don't want the serve side eventing. After giving the user input in Item detail Iview the user will click on Validate button and one WDJ applicaiotn should be called to validate the users input. Please guide me in achieving this result.
Thanks in advance.
Regards,
M.D.Sahu

Problem while creating the record in IT0080 from background

Dear All,
I have a requirement to Create the record for Maternity Leave in IT0080 from background, whenever applied from ESS.
Once the leave gets aaproved, while posting the documents from tcode PTARQ ( Program - RPTARQPOST), in the BADI PT_ABS_REQ, in method IF_EX_PT_ABS_REQ~POST_VIA_BLOP for the implementation, I am trying to submit the program in which the actual record is created in IT0080.
In this program through BDC i have created the BDC data and have used CALL transaction, as internally IT 2001 also needs to be updated, which gets calculated indirectly...
But when executed, it gives error of Employee cannot be locked... as the Document which is posted through PTARQ, have several locks... I tried to dequeue the same...
but cannot resolve the problem...
Secondly i tried to create the Job also... which would be executed after some time... but still its not getting updated...
Any help... will be highly appreciated...
Regards,
Heena

Hello s.s
I'm not understand exacly what is your problem?
Field can have both values at the same time(Time Stamp and User stamp) only if that field calculated
Maybe you told about two different fields?
User stamp field return username only it's standart functionality
Create stamp - return date/time combination
Remote key is avialable when you repository configured to work with some remote systems
All records from repository (LUT, taxonomy attributes ets.) you can map to corresponding Destination items
Regards
Kanstantsin

Error while creating a record in a custom infotype

hi to all experts,
I have created a infotype with 3 screens . But one of the screen im getting this error while saving a record .The Required screen change cannot be made.

Im defining using the table pa9005 not the structure p9005
(is it the same)
Please help me ....
Edited by: mohammed abdul hai on Sep 18, 2009 8:20 AM

Error in message monitoring while creating new record in R/3

Hi All,
I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
Service name: Validation_Service
Message: BackendKeys are not filled in table HEADER returned by getDetails
I am passing some random number from Client to SAP R/3 create function module.
When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
Corresponding to newly created record, i can see the data in getdetail header also.
Not sure why this error is coming.
Appreciate your help!!
Thanks & Regards
Devendra

The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE.

Use of Condition update while creating Condition Records

Similar Messages

Maybe you are looking for