Use of Data Flow in the Action Box

Hi Guys
Can any body explain the use of Data Flow in the action box?
If anybody have the doc. mail to [email protected]
It would be more useful if anybody expalin it with an example?
Thanks

Hi,
Thanks
know i want to confi. the following scenario
that is
I have to raise the ECC delivery from CRM through CIC0. After that it has to come in to the Application Area.
In such way that when i choose the ECC delivery, it has to display the list of ECC delivers that have already delivered.
Can you help me out how to go ahead?
know i am able to call the ecc delivery and save it.
Thanks

Similar Messages

I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the Actions box up, it is only showing a small list of effects to use. And no side bar to go any further. When I click on the little arrow at top and then click on "load actions"

I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further. When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search". The folder at the top does say "Actions". How do I get more effects? The tutorials that I've checked into all show a long list of effects in their box. Can anyone help?

To use the existing actions, try the following:
1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
2. Then click on the name of the Action, in this example Faded Ink is the Action name.
3. Then press the Play button to run the action.

How do I get more effects in my action box? I am only showing a few, like BOTTOM BORDERS, LOSE WEIGHT AND SPECIAL EFFECTS. That is all. The turotials I've checked into all show a long list of effects in the actions box. If anyone could help, I appreciate

How do I get more effects in my action box? I am only showing a few, like "Bottom Borders, Losing Weight, Resize and Crop, and Special Effects. And they do not list but a few effects. When I have watched the tutorials, they are showing a long list of effects in the action box. (with a side space bar) I do not. When I have clicked on the little arrow at top, and clicked "Load Actions", a box comes up, but it is blank,saying "no items match your search". I'm lost! If someone could help, it would be much appreciated! I would like to start using this.
Thank you.

Apple Computer Customer Relations:
1-512-674-2500

Help Required Regarding - SAP Job names using R3 data flows

We are calling a set of SAP Jobs using R3 data flows in data services. When ever a job fails we first kill the active SAP jobs by logging into SAP and then restarting the Jobs.
There are about 100 odd SAP jobs that we call using these Data services Jobs so we wanted to kill the jobs using a reusable code on the SAP side by passing the Job name just before every R3 flows just incase its still in active status.
So wanted to know if there are any short cuts to retrive the set of associated SAP job names because it will be a tedious process to hardcode the SAP job names and pass them as parameters for all the 100 + SAP job names in the custom defined resuable code.
Any help or advice on this please !!

The program is not meeting the expectations
and the problem is due to reflection.Do we know this for certain?
... my application gets the class name, field name
etc. from an XML file so i don't know their method names
beforehand .
Now since every class instance corresponds to a row
in the database and i have to call get and set
methods of each class instance so the performance
keeps on degrading as the number of columns and rows increase .
Can somebody suggest some improvement regarding this
and regarding creating multiple instances of the same object Class.forName() will be using a hash already, so there is probably not much room for improvement.
Class.newInstance() probably does not take significantly more processing than a simple "new Fubar();".
Umpteen reflective method invokations (one per column) for each row/instance - Are you saying these are the problem?
You can test this easy enough.
If you comment out the reflective method invocations and leave the rest of your code untouched,
does your application processing speed up significantly?

How to save the data present in the description box?

HI friends,
I have got a requirement where i am having one description box (custom_container) in one screen and the line length is 250. Code is like this...
DATA: CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
EDITOR TYPE REF TO CL_GUI_TEXTEDIT,
REPID LIKE SY-REPID.
CONSTANTS: LINE_LENGTH TYPE I VALUE 250.
MODULE STATUS_101 OUTPUT........
My description box is working fine.....
here i want to store the data entered in the description box(text box) when i press SAVE.
Can any one provide me the solution.

Hi,
Since you are using the class CL_GUI_TEXTEDIT, you can call its' method GET_TEXT_AS_R3TABLE to save the text in internal table.
If you wan ease the work of creating Z-Table to store them, you may use FM 'SAVE_TEXT':
SAPscript: Save text
The function module writes a text module to the text file or text memory, depending on the specific text object.
The module can be used to change existing texts and to create new texts. If it is clear that it is a new text, this can be specified via the parameter INSERT. The result is better performance as a test read is not performed.
Parameters
CLIENT
HEADER
INSERT
SAVEMODE_DIRECT
OWNER_SPECIFIED
LOCAL_CAT
FUNCTION
NEWHEADER
LINES
Exceptions
ID
LANGUAGE
NAME
OBJECT
Function Group
STXD
Hope this helps you.
Thanks,
Anfernee

I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

What do you mean a moderator

How to select data from a table using a date field in the where condition?

How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.

Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay

I'm using Big date theme but the numbers on the date is cut off on top. I'm on iphoto 11 and OS 10.8.2. anyone else having this issue??

I'm using Big date theme but the numbers on the date is cut off on top. I'm on iphoto 11 and OS 10.8.2. anyone else having this issue??

OK try the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

Using ABAP DATA FLOW to pull data from APO tables

I am trying to use an ABAP Data flow to pull data from APO and receive error 150301. I can do a direct table pull and receive no error, but when I try to put it in an ABAP data data flow I get the issue. Any help would be great.

Hi
I know you "closed" this, however someone else might read it so I'll add that when you use an ABAP dataflow, logic can be pushed to ECC - table joins, filters, etc. (Which can be seen in the generated ABAP).
Michael

QM02 - notifications - update document flow for new action box item

I have added a new action box item on qm02 (notifications). I am created a PO and a delivery. I wish to update the document flow to include these new records.
I am trying to work with function qmlr_create_document_flow without success.
Does anyone know how to do this?
Thanks,
rv

Hi Rags,
Thanks for your reply.
About your reply:
1) Yes, I was also thinking that 2 preceding docs may not be possible in a doc flow, and had also indicated the same to my customer. However, wanted to be 100% sure that it cannot be done.
2) I cannot go ahead with a Service/Release Order. The requirement is to create a Return Order or a Credit Memo Request (CR) directly from the Service Notification and any other order is not in scope.
I was thinking of something as below:
The Service Notification header is linked to Return Order header only, there are no links at the item level. Is it a feasible solution to have a doc flow between invoice items & return order items, since return order items are not yet linked?....I am just thinking of different things to find a solution!
Thanks again.
Cheers
Vicky

Selecting All In The Action Box

Is there a way to select the whole thing in Action box next to the timeline?
Thanks,
joe

Hi there,
Do you mean Select All in the timeline itself? Just select one thing there such as a transition, and then use Cmd/Ctrl+A to select everything in the timeline.
hth,
Joe

Using Long Data type in the Page

Hi ,
I have a page (in multiple page creation form ) which is suppose to contain only the NOTES field of the entity being created . The Notes field is defined as LONG data type in the table.
Two Doubts.
1. As of now in Jdev , u only have Varchar2 data type when assigning to any messageText layout item. What should be the max value set for Max Lenght of this field on the form . I suppose its 32k+ ,since its Long Field .
Anybody has used Long notes field before ??
2. This page has only one item on it , ie Notes ,which i have defined as messageRichText as style. I have been trying to resize this item ,so that it stretches out on entire page . But it just doesnt resizes .. any idea ..below is my PG.xml code
<?xml version = '1.0' encoding = 'UTF-8'?>

<page xmlns:jrad="http://xmlns.oracle.com/jrad" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:ui="http://xmlns.oracle.com/uix/ui" version="9.0.3.8.13_1426" xml:lang="en-US" xmlns:user="http://xmlns.oracle.com/jrad/user" xmlns="http://xmlns.oracle.com/jrad" file-version="$Header$">
<content>
<oa:pageLayout id="NotesMainR" amDefName="oracle.apps.xxi.pro.server.ProAM" windowTitle="Pro Notes" controllerClass="oracle.apps.xxi.pro.webui.ProNotesCO">
<ui:corporateBranding>
<oa:image id="corporateBrandingImage" source="/OA_MEDIA/FNDSSCORP.gif"/>
</ui:corporateBranding>
<ui:contents>
<oa:messageComponentLayout id="ProInfoR" extends="/oracle/apps/xxi/pro/webui/ProInfoRN"/>
<oa:pageButtonBar id="PgButton">
<ui:contents>
<oa:submitButton id="Back" use="/oracle/apps/fnd/attributesets/Buttons/Back" unvalidated="true" serverUnvalidated="false"/>
<oa:submitButton id="Save" use="/oracle/apps/fnd/attributesets/Buttons/Save"/>
<oa:submitButton id="Continue" use="/oracle/apps/fnd/attributesets/Buttons/Continue"/>
</ui:contents>
</oa:pageButtonBar>
<oa:tableLayout id="region3" hAlign="center">
<ui:contents>
<oa:rowLayout id="region4" hAlign="left" vAlign="top" width="100%">
<ui:contents>
<oa:cellFormat id="region5" height="100%" width="100%" hAlign="left" columnSpan="1" vAlign="top">
<ui:contents>
<oa:header id="region6" text="Notes In Table Layout">
<ui:contents>
<oa:messageRichTextEditor id="ProNotesI" maximumLength="20000" viewName="CustomerPOVO" viewAttr="ProNotes" fontBar="true" alignmentGroup="true" tipType="shortTip" prompt="Pro Notes" richTextModeDisplayHeight="100%" richTextModeDisplayLength="100%"/>
</ui:contents>
</oa:header>
</ui:contents>
</oa:cellFormat>
</ui:contents>
</oa:rowLayout>
</ui:contents>
</oa:tableLayout>
</ui:contents>
</oa:pageLayout>
</content>
</page>
any idea??
thanks

Hi Padma,
Thanks for reply !!
The width is still pain point for me ,as i am unable to increase its width .
I tried increasing the width of the table to 100%, however ,it still doesn work .
Any pointers ??
If you have used this widget before , could you assist me with any sample code u hv ??
I would really appreciate it
thanks

Problem to get ResultSet when it is used a Date type in the query condition

hello ,
I having a bit of nightmare getting a ResultSet how result of one simple Query for a table when the condition WHERE involve a Date type.
To change the String value in a date to use in the query condition, I tried both:
String strDate = "dd/mm/yyyy";
(1.) java.sql.Date sqlDate = new java.sql.Date(strDate.getTime() )
(2.) SimpleDateFormat formatter = new SimpleDateFormat(strDate) ; sqlDate = formatter.parse(strDate);
and finally I use this code to get the ResultSet:
sql = "SELECT * FROM myTable Where (idCli = " + cd_Cli + " And dateReg = " + sqlDate + ")";
statement = connection.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
resultSet = statement.executeQuery(sql);
boolean ok = resultSet.last();
totNumberOfRegistration = resultSet.getRow();
But In both the cases I get a empty resultSet.
I shoul like if someone would look my code to say me where it is the mistake...
thank you
tonyMrsangelo
P.S. I tryed using PrepareStatement too to get the ResultSet, but in that case I couldn't use the ResultSet because executing the statement resultSet.last() I get the error: "Result set type is TYPE_FORWARD_ONLY"

In a database like Oracle, you need to use a function like TO_DATE; other databases may have something similar.
However, the proper way to do this is to use a PreparedStatement. Then you can say
PreparedStatement ps = conn.prepareStatement("update SOMETABLE set SOME_DATE=? where SOME_ID=?");
ps.setDate(1, new java.sql.Date(someJavaUtilDate.getTime()));
ps.setInt(2, theId);
ps.executeUpdate();

Empty space in first page if data flows to the next page

Hello All,
i have some windows after the main window and before the footer, like signature and two more.
suppose the data in the main window flows to the second page, there is lot of blank space left in the first page as i am printing the signature window only after the main window.
is it possible to avoid this space so that the first page is full with the main window data.
Thank you
Usha

Hi Usha,
Whatever i get from from question is like.. when your data in the main window is getting exceed then its flowing to next page.
And you are printing the singnature window after main window.
Do one thing take ur main window size as full page i mean whtever u r going to print in the signature window or other window after the main window this windows u define in your main window footer , By doing this what will happen that after your all main window data that your other windows will print and without space.
Regards,
Sanket

How to use '*' as data Element in the NTE(Edi 850) Segment

Hi All,
I am facing a field level error while using '*' in EDI 850 (NTE segment). '*' is also used as Data Element.
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
I have asked this question before
http://social.msdn.microsoft.com/Forums/en-US/1668e8d8-ee99-4d79-961b-8d26f3a496f8/error-while-using-in-the-nte-edi-850-segment-where-is-also-used-as-data-element?forum=biztalkediandas2
The answer in the above forum was to ask client modify the EDI message.
Previously, our client was using a different technology (other than BizTalk) which was working fine with this format. So, they are insisting on this format only.
Thanks,

Sorry, the answer is the same.
It doesn't matter what EDI platform either side is using, the '*' in the field content conflicts with the '*' that is the element delimiter. That is invalid EDI, there is no way around that short of writing a custom EDI parser.
It's not clear if you're sending or receiving this message. But again, it's really doesn't matter.
1. Change the Element Delimiter to something other than '*'. < or > are not uncommon.
2. If you are receiving the EDI, create a custom Pipeline Component that "handles" NTE02 either by replacing the '*' with a substitute char or deleting it.
3. If you are receiving, you could add extra elements to NTE to accommodate extra fields (since that's how the parser will see them). Then you can join them again in a Map.

Use of Data Flow in the Action Box

Similar Messages

Maybe you are looking for