Use of Error Stacks when loading to a DSO

Hi all,
Hope you can help with the below.
I am loading from a flat file datasource to a DSO.
I do not want to use the DTP option 'No futher processing without master data' to identify master data errors as this causes the load to fail should an error be encountered.
I want to use the error stack and need the errors in both the transactional data AND master data to be moved to the error stack so the load to the DSO can continue, and errors be corrected later.
When I load the file which contains transactional and master data the only error that is sent to the error stack is for the transactional data - a 'data field' set to overwrite in the mapping.
However all Key Fields are master data and the errors are not being reported as well, they are flowing through to the DSO and only being reported when we try to activate the DSO.
So how can I get master data (Key Field) errors to also be moved to the error stack ?
Many thanks.

I think its not possible.
Check this doc http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10c6c05c-89c4-2c10-89bd-fc5ce1d124e2?quicklink=index&overridelayout=true
It defines a way to handle these records.

Similar Messages

Error 1 when loading flat file in BW 7.0

Hi,
The flat file structure is same as the transfer structure. Its a csv file and i also checked about the delimiters and stuff.The flat is not open and it is closed while i am loading it. The same file gets loaded if i try in another laptop with my id.If i use my colleague's id on my system also...it doest work...so, the basic problem is with my laptop. I know its nor related to type of data or transfer structure. Its some settings on my laptop which got changed automatically. If i install some other softwares like mozilla firefox or yahoo msg-will that create a problem? I am not at all understanding why its like this. Please help.The error msgs i get when i try to load the flat file -
Error 1 when loading external data
Diagnosis
Error number 1 occurred when loading external data:
1. Error when reading the file (access rights, file name, ...)
2. File size or number of records does not correspond to the data in the control file
3. Error when generating the IDoc
4. File contains invalid data (errors with an arithmetic operation or data conversion)
Procedure
Check whether you have the required access rights and whether the data in the control file is correct (file names, record length, number of records, ...). Correct the data in the control file if necessary and check the data file for invalid data (values of the wrong type, values in the wrong format for conversion exit,...). Check whether the file has headers that have not been specified.
Error when opening the data file C:\vikki1.csv (origin C)
Message no.
Diagnosis
File C:\ vikki1.csv (origin C) could not be opened.
Origin:
A : Application server
C : Client workstation
Procedure
Check whether the file entered exists and is not been used by other applications.

Hi! Vikki,
Error 1 means your flat file is open while uploading the data..
your flat file should be closed while uploading data in BW.
that is why it is saying "Error when opening the file..".
first close that file n then upload..it will work.
rest of the things are ok!..
I hope this will help you.
Regards,
khyati.

Firefox does not open at all - error message when loading firefox 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program in English

I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
Can anyone help me sort this out? If I log in as someone else Firefox works?
== This happened ==
Every time Firefox opened
== the computer shut down unexpectedly ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

You can o a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

An error occurred when loading the Cube ; Analysis services 2012

Hi All
We are facing issue on our SQL Analysis services 2012 (11.0.3381.0) on windows 2008 R2.
All cubes are not getting loaded on server. When we restart services some times 2/8 cubes some times 4/8 cubes and some times all cubes get loaded. We are not sure what could be reason for such in consistency. Below are the logs
Failed to load server plug-in extension defined in assembly System. The following error(s) have been raised during the plug-in initialization. Loading of the System assembly failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException;Could
not load file or assembly 'msmdspdm, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A)
Strong name validation failed. (Exception from HRESULT: 0x8013141A). Enumeration of types or functions through reflection in managed code failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException.
OLE DB or ODBC error: Query timeout expired; HYT00.
LOGS :
(12/6/2013 7:45:12 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the Claim Industry Summary Metrics Current. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:42 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:44 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:45 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:55 AM) Message: Service stopped. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210001)
(12/6/2013 7:47:04 AM) Message: The Query thread pool now has 1 minimum threads, 40 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingShort thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingLong thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The Processing thread pool now has 1 minimum threads, 64 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x000000000000001f now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000003e0 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x0000000000007c00 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000f8000 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:11 AM) Message: The flight recorder was started. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210005)
(12/6/2013 7:47:11 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
Thanks
Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/

Hi Saurabh,
Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support

"Error occurs when loading transaction data from other model" - BW loading into BPC

Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
Chris

Hi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris

Error occurs when loading transaction data from other model

Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
Praveen

Hi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST)

Error 1003 when loading a VI dynamically on LabView Run-time ini file configuration

hi all,
I have a problem with my runtime excutable.
On 4 systems, all running XP it runs fine.
On 2 systems ( one a new install of just LVRT 2011 SP1 ) I have:
Error 1003 when loading a VI dynamically on LabView Real-time
Or more spoecifically the error code is 1003 and the error source is Open VI Reference.
When the RT app runs correctly I get these paths:
Path Sent to Open Vi Reference: Yeast_Grower.exe\Tecan_talk_Control.vi,
Path Returned from Open Vi Refence: C:\Program Files\Yeast_Grower\Yeast_Grower.exe\Tecan_talk_Control.vi,
On a system that does gets the 1003 Open Vi Refence error I have the same Path Sent but of course no path returned as it does not open.
To be sure that the vi Dyanmically called vi is compiled and valid at runtime I also include a copy of in the main.vi.
To be extra sure I have also installed the runtime versions of VISA and DAQmx.
I have compiled it with and without the "Use LV 8 calling hiaracy"
My conclusion as this stage is that either the installation of LVRT 2011SP1 misses something the earlier LVRT installtions make.
or is there a MyApp.ini or LVRT .ini that controls how the RT dyanim calls are handled.
Help very welcome how to solve this puzzle.
thanks
michael

I understand that all the PCs (6 of them) have LV 2011 SP1, runtime or the development system installed. Right?
How many of these PCs have the source code available on them?
-> Only one of them has the source code.
I am not sure I understood 'I also include a copy of in the main.vi'. Does it mean you placed the subvi in the main.vi?
-> I meant I have included in main.vi the actual vi that is called dynamically - but only where it is not called.
Did you try including the sub vi which is called dynamically, as 'Always included' in the EXE build?
-> No, I did not know of this option - but the above I did this by default.
Edit: Did you verify the software versions of LV RT, VISA etc on all the PCs? Are they same?
-> I did verify even added DAQmx just in case
There is lots of material available on this forum for error 1003 and dynamic vi calling. Did you find anything useful to try among the forums threads?
-> I did view many of them.
I did finally find the answer.
I have a subvi (callNet.vi ) in the dynamically called vi (dynamic ) that calls .Net libraries.
Now the thing is that this subvi callNet.vi is coded out by enclosing it in a Disable structure.
In fact this subvi ( callNet.vi) does not even compile - ie it has a broken arrow
however if enclosed in a Disabled structure and disabled, the enclosing vi compiles OK.
However I have discovered that even with the .Net calling subvi (callNet.vi) in the Disabled state of the Disabled structure
the enclosing vi (dynamic.vi ) does NOT run - although it compiles just fine.
Once I installed the .Net libraries (I actually did include them with my app installer ) with the vender's supplied installer
then my app now successfully calls the dynamic vi.
So the Summary and warning is: Even if the dynamic called vi is included in Main.vi and Main.exe runs ( but does not call the dynamic vi - except when called dynamically at later some point ) and even if, in this case, the .Net calling subvi is disabled out ie no .Net calls are made the dynamically called vi will not run when called dynamically.
I hope that is not too confusing. In summary it seems the Disable structure does not entirely disable.
Michael

Error 1 when loading external data

Hi BW( Best and Wise) friends,
I am not able to load data into my infocube. My source system is a PC file.
Message "Error 1 when loading external data is displayed." when scheduled.
When I checked the error details using Monitor button,
During extraction, the data request was arranged(indicated by green mark),but there was error in data request(red).
During extraction,data request was received (green),but there was some error in data selection(red).
Anticipating good solution.

HI all,
1.The flatfile matches with the transfer structure
2.The file is a .csv format file only.
3.The path is correct
I had chosen comma as my data separator.
I had declared fields in the following way in the XL csv file
Name of the candidate text
Name of the party- text
Age-number
Number of votes gained number
Calendar day text.
I had already tried the following.
When I clicked the preview in the external data tab of the infopackage, a window showing the preview parameters is opening. When I clicked the tickmark, message error 1 when loading data is displayed.
4. The details tab of the monitor showed the following:
Overall status : Errors occurred: or: Missing messages-red
4.1)Requests(messages):Errors occurred-red
 Data request arranged-green
 Error in datarequest-red
4.2)Extraction(messages):Errors occurred-red
 Data request received-green
 Error occurred in data selection-red
4.3)Transfer(IDocs and TRFC):Everything ok-green
 Info IDoc 1: Application document posted-green
 Info IDoc 2: Application document posted-green
4.4)Processing(data packet): No data-yellow
I had initiated the discussion in the forum with this information only.
Regards,
Balaji
Message was edited by: balaji vijayakumar

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Linkage error occured when loading javaclass into InterfaceMapping

Hi All,
i created java file having input xml and output xml file,i made it as one .jar file ,i imported that one into IntegrationRepository in importedArchive,when i call that .class file into InterfaceMapping iam getting this error, Linkage error occured when loading javaclass . how to solve this one
regards,
jasmine

Hi Prateek,
iam using jdk1.4.2
still iam not able to activate the interfacemapping ,iam getting this error
Linkage error occurred when loading class JavaMapping (http://myxmlnamespace, 21279630-c687-11dd-9b90-db1010109e85, -1)
here JavaMapping is my java class name
while activating the interfacemapping iam getting this error.
regards,
jasmine

Linkage error occurred when loading class MyClass

Hi
I have written one simple class name MyClass and i have created jar file and i imported into import archive... but in interface mapping while i am testing i am getting the "Linkage error occurred when loading class MyClass" error.... why i am getting this error
Thanks & Regards
Ravi Shankar B

Here it goes:
Symptom
The LINKAGE_ERROR error occurs during the mapping.
The trace contains "java.lang.NoClassDefFoundError: Illegal name":
Other terms
XI 30, Mapping, Linkage Error
Reason and Prerequisites
As of the jdk 1.4.2_05 from Sun, this program error occurs during the mapping in the runtime or during testing in the Repository. This error may also occur in conjunction with jdks of other vendors or other versions.
Solution
The error is corrected with Support Package 5 for Support Package 03 for the XI TOOLS 3.0 software component.
Import the corresponding archive SAPXITOOL03P_5.SCA for SAP Exchange Infrastructure XI 3.0 as described in the Netweaver 04 Support Package Stac Guide.
You will find the archive and the guide in the SAP Service Marketplace under the alias "SP stacks -> SAP NetWeaver -> SAP NetWeaver 04".
Regards
Vijaya

An error occurred when loading

when i try to play netflix on apple tv it say "an error occured when loading, try again later"

Hi Saurabh,
Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support

"****Error from PSA****" error message when loading InfoCube

Hi all,
I am getting the following error message when loading transaction data to an InfoCube.
***Error from PSA***
This is not MD or Hierarchies (like previous messages in the forum)
Please advise.
Thanks,
Miki

Hi Miki,
Before just loading data into the infocube. Catchup PSA table and see the data into it.
Then u may find the solution.
But as ronald said this shouldnot be the complete error statement.
bye.

I puchased the Photoshop/Lightroom, but when I try to download Lightroom I get the following error message:Error -302 when loading url aam://SAPCode=LTRM?productVersion=5.5?passPhrase=RRR9EU9BaSBdtGb7 BrzzYZ9hLdjmpvEWeq7/9gSYn2 lUDLZNr9UveWEgxzaiobbibx4d6

I get the following error message when attempting to load Lightroom: Error -302 when loading url aam://SAPCode=LTRM?productVersion=5.5?passPhrase=RRR9EU9BaSBdtGb7+BrzzYZ9hLdjmpvEWeq7/9gS Yn2+lUDLZNr9UveWEgxzaiobbibx4d6JK3R74HPAX4YFwTpkn6K3YQk6Ej82wRFyYvKwXKAVMfMhQCfW5qg8odoMny OV1JlBuT0gEMjSjG5EhuCR288pgnfgQbAmchGqKSU=
What can I do to solve the problem?

Ewlett you are receiving this error because the AAM Detect plug-in is not yet installed. Please see Error referring to aam protocol when you click download button | CC for more details.

Error handling when loading flate files

Hi
We have a Process Chain loading flate files from a server into a ODS. We want to create a routine to avoid errors in the ODS when no files is found.
The error we want to handle is
Error 1 when loading external data
Message no. RSAR234
We want to handle this error message as OK to avoid red request in the ODS
Please help
Kind regards
Ola Einar Langen

Hi, and thanks for your hints.
We ended up with the following codes. It's will mark the prosess chain red (but this is as wanted) but we have implemented that the prosess chain will proceed even with error in the loading process
The code for the routine implemented in the infopackage in "External data" tab.
p_filename = 'filename.txt.
OPEN DATASET p_filename FOR INPUT IN BINARY MODE.
If file could not be open
IF SY-SUBRC NE 0.
p_subrc = SY-SUBRC.
delete the current request
CALL FUNCTION 'RSSM_DELETE_REQUEST'.
ENDIF.
close the file if OK
CLOSE DATASET p_filename.
p_subrc = 0.
The solution is no OK for us
Kind regards
Ola Einar Langen

Use of Error Stacks when loading to a DSO

Similar Messages

Maybe you are looking for