Use of FI-CA Mandatory when using IS-Media solution?

We are implementing ECC6 with an IS-Media add on for newspaper and magazine distribution (MED_PDEX).  I would like to know if it is mandatory to use FI-CA as out accounts receivable solution, or if we can still use the more traditional FI-AR.  I am assuming that since FI-CA is associated with most IS-Media solutions than we must use it but I would like confirmation on this point.
Thanks and regards,
Julian Morrissy

Hello,
FICA -The Contract Accounts Receivable and Payable component is a subledger developed for industries with a large customer base and a correspondingly high volume of documents to post. This includes insurance companies, utilities, telecommunication, and public service companies.
Functionality wise there is difference between FICA & FI-AR. It all depends on your business requirements.
If it is only recording of Payments, DME file generation, Dunning means, FI-AR is suitable....but there are other things like Payments, Returns, Refunds, Dunning letters, Items submitting to third parties for collection <collection agency>, FADD <Fixed amount Direct Debit> {Payment Schemes}, VADD <Direct Debit>....you have to go for FICA.....
Furthermore there is a contract accounting with no specific line of business (FI-CAX).
Hope this helps
Rgds
Rajendra
Edited by: rajendra mukhyaprana on Apr 24, 2008 12:32 PM

Similar Messages

  • Using just the TV screen when using HDMI port?

    Hi,
    I have the Macbook Pro with retina display and I was wondering how I could use just the TV screen when using HDMI port. I don't want mirroring displays, just one on the TV.

    With the TV connected and the MBP plugged into the mains (i.e. not running on battery power) close the lid.  The MBP will go to sleep, wake it up with an external keyboard or mouse - which must be connected in advance, or paired in advance if a bluetooth keyboard/mouse.

  • TS4268 Does Iphone4 support Facetime Audio/Video using 3G? Or only when using Wifi?

    Does Iphone4 support Facetime Audio/Video using 3G? Or only when using Wifi?

    iPhone 4 does not support FaceTime over cellular, only Wi-Fi.
    You need iPhone 4S or later and also only if the carrier supports it, 

  • How do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    how do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    First, did you use Setup or Migration Assistant? That can happen when coming from a PowerMac or sometimes even from another (Intel) Mac.
    Second, wait for the next version of Final Cut due very soon to ship (may have to wait for the ".1" of course to clean up any early issues.
    Final Cut Pro - Wikipedia
    There are a few apps that are better.  I think you can run multiple instances of Handbrake for one.
    I've read about and wanted to try PowerDirector 9 (Windows)
    PowerDirector 9 video software
    video editing software Wiki

  • Using vriables in To field when using "Schedule For" option

    My Software:
    Crystal Reprts Server XI R2
    My Scenario:
    I am using the "Schedule For" option when scheduling a report to a group of people.  The email address i want to use is based on the their user name.  That is
    SI_USERID(AT)domain.com
    So i tried setting the "To" field with the following
    %SI_USERID%(AT)domain.com
    this didn't seem to work.  Am i using the right variable?
    As a note, when i used %SI_EMAIL_ADDRESS% in the "To" field it worked BUT as i'm trying to avoid entering an email address into every user i would rather use something like %SI_USERID%(AT)domain.com
    Thanks
    PS: Had to use (AT) instead of @ as the post was dissallowed for having email adresses in it.

    Solution found:
    %SI_OWNER% will return the user name. So
    %SI_OWNER%(AT)domain.com will work
    On a note the documentation on which variables are available seems scarce to me

  • On G71-340US: very low volume when using DVD player, but OK when using Windows Media Player.

    Just purchased new laptop G71-340US.  Volume (at full tilt) is decent when using Windows Media Player, but when using DVD player, volume is so low I can't really hear volume on a movie unless room is completely quiet, and I am right in front of laptop. Any suggestions, or is it really this bad?

    I don't have the answer, but I certainly agree. The G71-340us is severly under powered in the audio department. You would think with the extra room in the 17in. chasis they could have put a sound system with a lot more power. Other than that it's a great machine.

  • Why don't I see the 'Emoticons' and 'Format' tabs when composing a message in the new Yahoo Mail, using Firefox, but I do when using Internet Explorer?

    I have been using the new Yahoo Mail on Firefox. But today I noticed that when I write an email (Compose/Reply/Forward), I cannot format it. Only the 'Attachments' tab is present, but the 'Emoticons' and 'Format' tabs are not.
    But when I do it using Internet Explorer, all those tabs are present and I can format and do whatever.
    Is there something wrong with my Firefox? I have restarted my computer, I have shut it down, but my Yahoo Mail remains problematic when using Firefox.

    Firefox only allows you to save executable files. If you want to add an option to run them you can use the OpenDownload² add-on - https://addons.mozilla.org/firefox/addon/opendownload-10902

  • Lion quites when using excessive CPU, Lion quites when using excessive CPU

    When using my computer and have several programs open and reach around 60-80% cpu usage.. my computer will just quite and boot me to the log on page. This is quite a pain since I lose oeverything I was currently working on. Is this a known issue and is apple looking for a partch?

    When using my computer and have several programs open and reach around 60-80% cpu usage.. my computer will just quite and boot me to the log on page. This is quite a pain since I lose oeverything I was currently working on. Is this a known issue and is apple looking for a partch?

  • -5010F when using internet recovery option, -5010F when using internet recovery option

    I have tried to do clean instal of Lion OS but contantly hit an eror saying "Unable to Download components" then I tried using the internet -5010F when using internet recovery option but I am getting "apple.com/support -5010F error. I am a new bee to Apple and would appreciate any help provided.

    Please see Re: 5010F (3) error while attempting Internet Recovery

  • Are Pipelines mandatory when using an IP?

    Thanks for all the help so far, but I still have one more question regarding using
    IPs.
    Now, I have my IP working fine. However, is it mandatory to have a Pipeline after
    that. Can't I simply have my IP go back to the originating page when I have any
    exception (invalidform), or to the next page in the flow if all was good.
    Thanks
    Ashish

    Tanya -
    There are no examples of how to setup a set of IP, on a portlet that has multiple
    pages. Can u help with that. See my other post please.
    Thanks a ton.
    Ashish
    "tanya" <[email protected]> wrote:
    >
    you can order your nodes any way you want...as long as the ebcc allows
    you to do
    this (ie exception events can only go to exception nodes)
    if you look here, you'll see an example of an IP going to a JSP and a
    pipeline.
    http://e-docs.bea.com/wlp/docs70/dev/navigate.htm#1003298
    you might want to just take a look at the sample apps that come w/ your
    install
    to get familiar w/ this stuff.
    if you point the ebcc to this project, you'll be able to see lots of
    example webflows:
    <install-dir>\samples\portal\sampleportalDomain\beaApps\sampleportal-project\sampleportal-project.eaprj
    hope that helps,
    tanya
    "Ashish Gupta" <[email protected]> wrote:
    Thanks for all the help so far, but I still have one more question regarding
    using
    IPs.
    Now, I have my IP working fine. However, is it mandatory to have a Pipeline
    after
    that. Can't I simply have my IP go back to the originating page when
    I have any
    exception (invalidform), or to the next page in the flow if all wasgood.
    Thanks
    Ashish

  • How to use a single iTunes library when using multiple Windows Accounts

    Has anyone had success using a common iTunes library between multiple accounts on a single computer? I've tried and have been able to point all of the "different" iTunes programs in the different profiles to the same place...however, when I add files in one profile, they are not visible in any others. I've authorized the "different" iTunes in each profile to play music with my various iTunes store accounts...but no luck.
    Any thoughts? (As an aside, what happened to the days when Apple made everything simple? I mean, REALLY SIMPLE! They worked hard at that...and seem to have just given up on the things that made them GREAT! <sigh>)

    Drag the entire iTunes folder to a shared directory.
    Make sure all users have full access privileges to this folder.
    Start iTunes holding the Shift key and select *Choose existing library*.
    Now quit iTunes, log out and go the next user.
    Start iTunes holding the Shift key and select *Choose existing library*.
    Do this for each user.

  • Low resolution AirPlay when using MacBook Pro but high when using iPad

    I have a very strange issue. When I use Airplay from my iPad the image on the television is very clear and sharp, looking like a great HD picture. Wen I stream from my MacBook Pro, or mirror the screen, to the Apple TV the image degrades to a choppy, low-resolution, muddy version that looks terrible! It's strange because I have not had this issue before.
    Anyone have any ideas on what is going on with this? Again, the image from the iPad is fine, the image from the MacBook Pro is low-resolution. Thanks in advance for any help you can offer.
    - MayaAnim8or

    Ike582 wrote:
    Maya,
    I just had a new TV, DVD, Apple TV et al installed today, and the installer told me that he generally sees better performance using Airplay from an iPad vs a Mac.  As I began to play around with my device today, this was certainly true for me as well.  No idea why.
    Ike
    But the OP said that it was not like that before.

  • Text Missing when using PDF Convert but OK when using print PDF

    I am using Acrobat Pro 9 in Wnidows 7 and Microsoft Publisher 2003.
    When I use the CONVERT command to create a PDF - it is missing all of the text on the master page.
    If I create the PDF with the PRINT command - everything is OK.
    PS: The same Publisher File on another computer using Acrobat Pro 8 works fine -  CONVERT or PRINT and no missing text
    I prefer to use convert because sometimes the PRINT command drops some of the hyperlinks.
    [email protected]

    You're posting in the wrong forum, but you already know that...
    In any case, if you're running XP (you didn't supply any info about your environment, which is critical), there's a Microsoft HotFIX patch for PostScript printers such as Acrobat to fix the missing text problem. Do a Google for "Framemaker hotfix missing text" to locate the patch.

  • Tab key used as the shortcut key when using a text entry box

    When I use the Tab key as my shortcut key for a text entry box, it works fine in preview mode but does not work in the web browser preview mode.  I have tried to understand how I can take an existing project that is built for web browser application and make the tab key work.  The only thing I have been able to make my text feild entry take me to the next slide is to have the user click Enter instead of Tab and that is not the typical way we move between fields in the real application.  So....simulations is not accurate.  Can you give me step-by-step instructions on how to correct this problem in an already existing project?

    I think that you need to disable "Seamless Tabbing" in your file for it to work when published.
    You need to edit the HTML file that launches your course manually.
    Open your HTML file in notepad or equivalent
    Between the <object> </object> tags add:
    <param name="SeamlessTabbing" value="false">
    Save the HTML file again
    /Michael
    Click here to visit the www.captivate4.com blog

  • Preuut and postuut sequences are not executing when run using UI. They run when using the sequence editor.

    I am using TestStand 3.5 and LabVIEW 8 in a Windows XP environment.
    I have a sequence that runs properly when run from the sequence editor.  I have made a few minor mods to the simple Operator Interface that ships with TestStand.  When I run my sequence using the modified Operator Interface, the PreUUT and PostUUT sequences do not execute.  Only the main sequence executes.  This also happens when I run the demo sequences that ship with TestStand.
    What am I missing?

    Hi,
    It sound like you are executing the sequences without the process model, do you get a report at the end of the execution?
    What are these minor mods you have done?
    Regards
    Ray Farmer
    Regards
    Ray Farmer

Maybe you are looking for