Use of Field "Note" (WT_WARNTXT, Tabke name-ACWT_ITEM) in Wht button-MIRO

Dear Experts,
What is the role of Use of Field "Note" (WT_WARNTXT, Tabke name-ACWT_ITEM) in Wht button in MIRO/FB60 Transaction.
For what purpose it is used. This is field is allowing for any thing to be enter.
How can we make it enable so that the geying out is removed.
Regards,
Alok

Hi
WT_WARNTXT - Field is just like a text field, you can enter the WHT information in that.
There is no field status control available for this -  this is a structure field , which can't be controlled.
VVR

Similar Messages

  • Embedding Xcelsius Dashboard using calculated fields (not static field)

    Hi,
    I can succesfully embed the Xcelsius dashboard toi Crystal and maintain the correct assignments in the data consumer and Flash Binding Expert.  When the data changes in Crystal Reports, the chart is also changed however I am having problems when I want to use a value slider to manipulate data...When I base the chart data on a column of values that is generated using a formula for example.  Sales  * Percentage Increase.  I can not get this to work.
    When I run the report, I only see the static data which was used when the Xcelsius dashboard was generated.
    Using the flash binding expert I assign the data values to existing fields in the report, but I am wanting to assign the data values to this calculated range which is only in the Xcelsius spreadsheet, please help me in how I can do this.
    Thanks,
    Rich

    Hi this is solved, i just needed to link the field to the original field, not the formula.  Xcelsius makes the connections in the background

  • Pull title from IPTC headline field not IPTC object name

    I imported sample images from the IPTC.org site and filename shows up in LR title field because LR fills it's title field from IPTC title/object name field (frequently used for filename) rather than the recommended IPTC Headline field. I think the better practice would be for title in LR to come from the IPTC Headline field and suggest this change. I don't want to put my metadata titles in field other than the correct Headline field.
    Thanks, Ralph Daily

    >LR fills it's title field from IPTC title/object name field (frequently used for filename) rather than the recommended IPTC Headline field.
    Can you give a reference where it is recommended that fields be filled from a different source?
    On the surface, this would seem to lead to a lot of confusion. For example, what would happen to existing information in the Title/Object field if your suggestion was implemented? What happens when you synchronize XMP data back to the image?
    IMO, the way it presently works is just fine. I use the Title/Object field for the original filename and the Headline field for whatever descriptive text I want. Others may have a different approach. Why should LR scramble the approach we have been using long before LR was around?

  • Using Finder search not displaying file names

    I'm running 10.6.4 and searching from the finder on an Xserve for a file name 00035.png but it's not showing in the results.
    Any ideas?

    To clarify your question, when you perform the file search through finder, at the bottom of the window is there a place where it says "x items" and is the number shown there greater than zero?
    I am having trouble understanding if your search is returning results but they aren't being displayed, or if you're searching for a file you know is on your drive, but it's not being identified.
    Regards,
    -Ryan

  • XREF3 field not getting populated in BSEG table while posting MIRO

    Hi,
         I have one query in MIRO tcode.I have activated xref3 field in MIRO tcode using enhancement LMR1MF6Q.Now when i try to post document with some values in xref3 field on screen ,value is not getting populated in BSEG table.Please tell me what else needs to be done to achieve this ?
    any hint on this?
    Thanks & Regards,
    Soniya S.

    Hi,
    1.- According to SAP Note 904652 - MIRO: Different from FB60
    https://service.sap.com/sap/support/notes/904652
    MIRO is an independent Materials Management (MM) transaction that does not
    claim to be the same as the accounting transactions (such as FB60 or FB01).
    MIRO was developed to allow users to process vendor invoices within the
    context of the MM procurement processes as simply as possible.
    For this reason, among other differences, the field selection was limited
    to the absolutely necessary. For example, the following fields from the
    accounting document are not available in Transaction MIRO (this list is not
    complete):
    Reference key (BSEG-XREF1, -XREF 2, -XREF 3)
    2.- SAP Note 1156325 - BAdIs in the Logistics Invoice Verification environment
    https://service.sap.com/sap/support/notes/1156325
    Have a look at badi MRM_ITEM_CUSTFIELDS.
    This badi will create a new tab at item level in order to display the new fields.
    I haven´t used this badi so i cannot talk from experience here.
    Think twice before deciding.
    Best regards.

  • Answers - would like to use calculated field's name, not expression

    Hi Everyone,
    I'am trying to make several calculated fields in a single query in Answers. Each field references the previous one, and the expression of the first one is already 5 rows long.
    Now I reference it in the second calculated field by using "Edit Formula" -> "Column" -> 'Colum name'.
    My problem is, that it puts the expression of the previous field, not it's name. I have to use it for almost 10 times in this single expression, so -although it works fine- it is totally unreadable, and very hard to debug for example.
    And after all, I should use this field again, in several next calculated fields.
    Does anyobody have an idea, how to make calculated fields having only the name of referenced other fields in it?
    The repo is set for ad hoc reporting also, so using session variables which need to be set in Administrator Tool, is not an option.
    Thanks for help in advance.
    Tom
    Message was edited by:
    user608765

    Hi Venkat,
    thanks for the response. It would work, no doubt, in this special case, the problem is, that users use the repo for ad-hoc reporting aswell (and they don't have access to repo administration of course), so one can count on it, that there would be a new request of this kind every day to change the repo with customized user variables. I would like to avoid this of course.
    Having the name of a referenced field in a new expression would be a simple solution. Is it possible, that it can't be done?
    Tom

  • Php select using column Field names ?

    Hello,
    I need some advice using this select
    usually I do this
    $query = "SELECT * FROM table WHERE title LIKE 'body'";
    it works, is fast and no problems.
    But now I've a big table [id, ..., ...] and need to select just the row starting with body, so I use body%
    question is
    How can I select records using the Field property of the MySql table? (Field, Type, Collation, Attributes,...)
    I want something like
    $query = "SELECT * FROM table WHERE FIELD LIKE 'body_%'";
    Thanks
    Pluda

    ExPluda wrote:
     ok, I know the name of my table, but don´t know the name of the fields, or I know them, but need this to be dinamic, so what i´m trying is to select all content from table 'body' where FIELD name like ´body%'
    I understand what you're trying to do (or at least I think I do). The answer is simple. You can't do it.
    Why not? Because it's nonsense. If you know the name of the table, you know the names of the fields (columns). Moreover, the WHERE clause is used for checking values in fields, not for checking field (column) names.
    What you're actually trying to do is probably this:
    SELECT [field_name] FROM body.
    By the way, this sort of question should really be posted in the Application Development forum.

  • Country field in the subject name using mmc enrollment

    Hello.
    I'm running windows 2008 ADCS and i have the following issue:
    i can't get the C=country in the certificate [some other fields (o, ou) do not appear also]
    The setup is the following:
    * certificate template is configured to use active directory FQDN for subject name
    * the user has the country (and OU, and O) defined in AD user proprieties
    * i don't want to use web enrollment but MMC
    What i need to happen: when enrolling via MMC, with simple request certificate on behalf of, not only cn=userX,cn=Users,dc=XYZ,dc=local must appear in the certificate but also C=, O=, OU=
    any ideas how this is can be done?

    AFAIK this cannot be done using the default Windows policy module which only supports either the name from AD DN components or an entirely custom DN (if the template is configured to submit the name in the request) - but not a combination of name elements.
    It's also not possible to include other AD attributes that are not part of the DN (such as O).
    However, OU should appear if it is in the DN - but from your sample it seems the user is in the default Users container and not in an OU?
    A custom policy module could do that and combine DN components from different sources - e.g. the policy module included with Forefront Indentity Manager.
    Elke
    Edit: In
    this article an example is given of how to configure such a custom name in the FIM policy module, by combining data from AD (as your O and OU not in the DN), fixed strings, and additional input to the FIM portal:
    cn={User!GivenName} {User!SurName}, cn={Clm!CostCenter},o=Contoso,c=US.

  • Create table field (not record) using ADDT software

    Hi,
    I wondered if anyone can give me detailed help on how to create a table field on-the-fly instead of creating records, using ADDT software.
    For Example:
    I have two tables.
    One table holds language names and codes, ie Australia and AU for the shortened code.
    The other table holds country descriptions, but each table field is the shortened country code (in this case AU)
    So what I want to do, is when I add a new language in the admin (ie, France) then it will create france in table 1, and also create the table field FR in table 2.
    I am not up on programming, so if anyone can detail as much as possible, you will be saving my bacon here.
    Many thanks
    Mark

    Hi.
    Sounds like what you need is a "foreign key" in the detail table that points to the id of the country in the country table.
    ADDT is perfect for this even if the documetation (and this klunky forum) is now third class.
    I suggest that you read this http://help.adobe.com/en_US/Dreamweaver/9.0_ADDT/help.html?content=MXK3_052000_MX_K3_cont rol_panel.htm
    Make special note of Step 2, item 5, second bullet point.
    (Note item 4 demonstrates the point about pathetic documentation)
    This would be applicable to your Detail Table that needs to have its foreign key pointing to the id of the country table.
    For example, consider two tables with these fields:
    Countries:
    id_cou (the record ID)
    name_cou (the name of the country)
    isocode_cou (the ISO code for the country eg: AU for OZ)
    Details:
    id_det (the record ID)
    idcou_det (the foreign key which is the ID in the Countries table - so this is an interger field - not a text field)
    detailfield1_det (some detail info)
    detailfield2_det (some more detail info)
    etc
    etc
    So in the Dynamic LIst Wizard for the Details list you make sure that the foreign key points to the primary key of the Countries record.
    Now, here is the neat thing: When you get to creating the form for the Details table the foreign key gets displayed as a menu showing the actual names of the countries listed in the countries table.
    Experiment with that and see how you go.

  • After adding fields on KNA1 using append structure, not null dn't work

    Hello, all.
    let me ask you something.
    after adding fields on standard table 'KNA1' using append structure, not null , default value doesn't work.
    when I check table using data object check(utilities > data object > check),  the report says like this.
    Fld name  Position Data Type     Length Decimals Not null  Default
    MANDT    1            VARCHAR2 9                           X           '000'
    KUNNR    2            VARCHAR2 30                         X            ' '
    LAND1    3            VARCHAR2 9                           X            ' '
    ZMBRN   178        VARCHAR2 30                          X            ' '
    ZKUNNR 179        VARCHAR2 30      
    ZSEQ     180         VARCHAR2 12      
    fields ZKUNNR, ZSEQ  doesn't check not null, default.
    Any advice will help.
    thank in advance.

    Using 'initial values' check at SE11, I can explicitly make a filed not null.
    but when I use append structure, there is no way for checking 'initial values' check at SE11.
    thanks anyway.

  • I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

    I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged.  To create a PDF document, go to the source application then print the document to .pdf"  I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file.  After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared.  How do I resolve this problem?

    I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
    the log says the bellow details...what's the problem and how can i resolve it? thanks.
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    Cambria not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: show ]%%
    Stack:
      %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

  • Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.   When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

    Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
    When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
    I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
    However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
    So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
    Can I fully change the name without doing a complete re-install of Lion and all my apps?

    One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

  • "Could not save (file name) because the file is already in use or left open."

    Hello,
    When I tried save as a file, I get an error msg:
    "Could not save (file name) because the file is already in use or left open."
    The file is not open anywhere accept Photoshop.
    Mac Pro, OSX 10.5.6
    Photoshop CS4.
    I searched the forum but could not find anything even though i'm sure someone already asked it.
    would love to get a solution for that.
    thank you,
    shlomit

    There is a problem with both Photoshop and InDesign, then we can blame wich ever it is.
    1. I open a .psd file in Photoshop CS4 by double clicking it in Bridge
    2. This image is placed on a page in a open InDesign document.
    3. Doing some changes in Photoshop on the image.
    4. Trying to save and get this error message (this topics subject)
    5. Deleting the image from the page in ID doc, it is the only one in the document.
    6. Can't still save file.
    7. Closing ID completely and now I am able to save the file.
    I tried turning of Live preflight in Indegisn but that didn't help.
    So probably the fault is InDesign or the MacOS. I didn't have this problem with CS3. It is a stupid problem because this type of workflow is pretty common and one would expect it to be solved by now.
    Jan Suhr
    Stockholm, Sweden

  • TS3833 I am receiving this error when syncing my ipod: iTunes could not copy "song name" to the iPod "name" because an unknown error occurred (-50).  I am using iTunes version 10.6.3.25. Why?

    I am receiving this error when syncing my ipod: iTunes could not copy "song name" to the iPod "name" because an unknown error occurred (-50).  I am using iTunes version 10.6.3.25. Why?

    Right click the filename that won't download and selsct 'Get Info'. Look at the file path, does it have a //?// in it? That is a problem with Amazon downloads that prevent iTunes from finding the file. Use 'Add Folder' to add the album to your library and try syncing it again

  • Can I use a field name in text module

    Hi,
    I get a object name of the standard text in a field.  Can I use that field in Text module.
    Thanks,
    Srinivas.

    Go to t-code SMARTFORMS->Text Module->Create or Edit-> choose add icon and type your field name (used in your smartform) like this &fieldname&, then use this Text module in your smartform.

Maybe you are looking for