Use of graphical settings in APO DP interactive planning

I am using APO V5.
In interactive DP, when looking at data in the graphical view, the system shows key figures with various colours.
Is it possible for a user to save settings so that <u>each time</u> the graphical view is displayed, the same colour scheme is used. For example, always see 'actual history' in green, and always see 'ex post fcst' in blue.
Thanks,
Bob Austin, Atos Origin

check the SAP note 706092. There are some restictions.
/Shibu
Thanks for rewarding points if this is helpful

Similar Messages

Is my graphics card too under-powered to use the graphics settings in the 64bit CS 6

I cannot get certain filters to work in 64bit CS6 as it will not let me used the GPS settings because it seems to think my driver is not installed properly. I have reinstalled the latest driver to no avail. In 32 bit CS6 I have no problems at all.
I am using a Dell M4700 workstation with a AMD Firepro M4000 (FireGL V) on the Windows 7 operating system.
Is my graphics card too underpowered to use the graphics settings or are there other issues involved?

I don't know AMD cards, but I just looked up the notebook, and that is a very capable little system, so I really think it should be OK. The bottom line, as you have already stated, is that it needs an up to date driver. Where did you find your 'latest' driver?
If you got it from Dell or Microsoft, then you could likely end up with an out of date driver, so you need to go to the AMD site.
http://www.amd.com/US/PRODUCTS/WORKSTATION/GRAPHICS/ATI-FIREPRO-MOBILITY/Pages/ati-firepro -mobility.aspx
AMD have an auto update tool here, but you will probably need Java installed
http://support.amd.com/en-us/download

User Exit in APO to change Planning version defaults

Hi,
Is there any user exit/BADI I can use to User Exit in APO to change Planning version defaults.
Regards,
Tarun

Hi Emmanuel,
I am searching for this exit in APO-DP.I have a requirement where we CIF master data (location) from SAP R/3 to SAP APO.However the location are saved in default planning version/model ( ie 000) I need to save these locations in another planning version and I am looking for an appopriate user exit/BADI which can accomplish this.
Regards,
Tarun

Changes to using graphic settings in Bridge CS6 scripts

The "CS6 Tools Guide" document shows no changes in how graphical settings should be used for Foreground Colour, Background Colour, Fonts and Font Size, as well as the use of Images in panels. All these work as before with scripts used in Photoshop CS6. But with Bridge CS6 the use of an image will crash Bridge, whereas the settings for Colours and Fonts are just ignored. Does Bridge CS6 now have customised settings for graphical changes to panels? Or is this a bug?

I'd much rather have 32 bits that do what they ought to… sounds like CS6 has 48 that don't…

Cannot use Higher Performance graphic settings

Hello,
When I originally bought my Macbook Pro three weeks ago, I had no issues with going to system preferences and selecting and saving the "Higher Performance" setting for the graphics for the Power Adapter. This visibly improved graphics performance for some programs I use.
However, recently, I noticed graphics performance wasn't as expected when running on house power, and I noticed that in system preferences < Energy Saver, my graphics settings have been placed back to "better battery life" for the Power Adapter setting...I keep trying to change it back to "Higher Performance;" when I log out and back in, and re-check the Energy Saver settings, there's a message box saying that I still need to log out for the changes to save. I can log out multiple times and they never seem to save, with that message continuing to be there. If I reboot altogether, and go back to system preferences < energy saver, its back to "better battery life," as if I never made an attempt to select "Higher Performance." Ive tried repairing permissions, and I've tried repairing the disk using the start up DVD during the boot cycle, and nothing seems to help. Since this is a new computer with few items on it, I even did a clean install of the OS....still to no avail.
Any ideas?
Thanks.

my problem is simalar but different.
my new macbook pro summer 2009 2.53 has no option to switch beetween low and high performance in the energy saver pref pane.
googling i found that this is not a isolated case.
someone solved the problem extracting from a leopard dvd with pacifist the 4.0 version of the energy saver pref pane.
all this situation may be caused by the 10.5.8 update.
Hope tha someone at apple try to reserve some working hour to solve this problem with an update instead of pushing hard on the snow leo launch
Max

Power Map has encountered an error and it needs to close, after changing the graphic settings

I've been using the updated Power Map tool successfully over the past few days.
Last night I was playing around with the graphics settings that can be found under the File Tab (I know that should teach me from playing around and following the user guide :-) ) and I changed the detail from Medium to High (I think) and now all that happens
when I click on create a new tour or select an existing tour is
"Power Map has encountered an error and it needs to close. Power Map can collection information about the error and create an e-mail which you will be able to send to Microsoft and help us fix the problem. Do you want to do this?"
The error that gets generated can be seen below.
Thank you for submitting this error information to Microsoft. We appreciate your help!
System.Exception: Could not create the render target shared resource.
   at Microsoft.Data.Visualization.Engine.Graphics.Internal.D3DImage11.SetBackBuffer11(IntPtr pResource)
   at Microsoft.Data.Visualization.Engine.Graphics.D3DImage11.SetBackBuffer(RenderTarget renderTarget)
   at Microsoft.Data.Visualization.VisualizationControls.GlobeViewModel.CompositionTarget_Rendering(Object sender, EventArgs e)
   at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
   at System.Windows.Media.MediaContext.AnimatedRenderMessageHandler(Object resizedCompositionTarget)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
I've removed Power Map from the system, restarted, repaired Office, restarted and reinstalled Power Map but the problem remains. So i'm guessing that the setting I changed are stored in the Registry or File System somewhere.
Any help would be gratefully received.
Regards
Rob Ireland

Is this still an issue?
This also might be worthy to send to the team as a bug.
You can send it in email using the Smile/Frown feature in the UI.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

MSIGE60 not using dedicated graphics?

i everyone, I recently purchased a refurbished MSIGe60 laptop online equipped with a 2gb Nvidia Gtx660m and has the integrated intel HD 4000 as well. My laptop at the moment seems to be always using the Intel graphics, because I am getting terrible performance for games that this should be able to play as I've reserached on various videos on youtube. For example, I should be able to play skyrim with at least high graphics at 60fps , but whenever I load it up the game automatically has my settings to Low, and even if i change it to high the fps is unbearable. I have the latest drivers as far as im aware, and whenever I play a game it is always has the "run with NVIDIA high performance processor" as a default. Is there anything I can do about this? I have searched this topic many times and I know many people with the same model laptop have had this problem but I can't seem to solve what is wrong with it not using the graphics card even if it is set to it. Any tips would be much appreciated, thank you.

Quote from: Svet on 01-October-14, 22:05:12
Nope, for this model power button is not indicator for graphics cards
its always light in blue with regardless what video card is in use
@GatorKing95
is your nvidia card 660m is proper installed when you look in device manager?
If yes:
when you go to Nvidia control panel,
under 3D settings, then select "Adjust image settings with preview"
and leave it in that way, does your Turbo button start lighting?
If I remember right, the power button still changes on the GE series. Watching a few videos, I did in fact see the power button switching colors when using different video cards. I believe ALL the gaming laptops use this feature, as an added indicator for which video card is in fact in use.

Ability to save graphic settings on dataview across all users

Hello All,
Do you know how to save a graphic setting on a dataview?
i.e. i have customized a graph on my dataview, which have specific settings.
When i go into the dataview, my settings are as per defined. however when another user enters the dataview, my specific settings are not displayed.
looked up on sap library and saw the following:
The graphical display in interactive planning depends on the following factors:
·        It is user-specific.
·        It is planning book-specific.
·        It is data view-specific.
Is there a possiblity to save a setting at a central place which will be evident across all users?
Thanks
Regards,
Stella

You can assign setting from you user id to other planner user ID by tcode :
/SAPAPO/SDPUSET - User Settings for Interactive Planning
I am not sure wheather it is applicable for graphical setting also.
If it is not applicable than i don't think it is available with std SAP functionality .
Manish
Edited by: Manish Kumar Rathi on Oct 5, 2008 9:16 PM

Map functionality in interactive planning using PC MILER instead of IGS

Dear Experts,
We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
The PC MILER is using the customized solution for calculating of the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
I have configured all the relevant settings that are required for using the MAP functionality in interactive planning. However the VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
Please advice if anyone came across similar integration issues, or have any insights on this issue?
Thank you,
Ramesh.

Dear Experts,
We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
The PC MILER is using the customized solution for calculating of the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
I have configured all the relevant settings that are required for using the MAP functionality in interactive planning. However the VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
Please advice if anyone came across similar integration issues, or have any insights on this issue?
Thank you,
Ramesh.

Use of navigation attributes in APO DP

I am trying to clarify how navigation attributes compare with full planning characteristics in APO DP (V5).
In general, I know that navigation attributes are used for selection and navigation in APO DP.
But suppose I have a navigation attribute called 'product type' for planning characteristic 'product'. Isn't it also possible to forecast and make adjustments at the 'product type' level.
If the answer is yes, what is the real difference between the use of navigation attributes and planning characteristics?
Thanks for any help with this.
Bob Austin

You do not see difference in Attribute and characteristics in the interactive planning screen. So you should be able to create selections and do general navigation
just a little more detail on the difference between nav attributes and planning char
But creating forecast profiles might be a problem- Selections with navigational attributes do not create forecast assignment table entries. As of SCM4.1, the attribute information can be stripped out of the selection via BADI, allowing an assignment entry to be created.
Maintenance of CVCs also have to be done differently. Navigational attributes are not same as CVCs. Instead they point at the value of another characteristic. We create master data for nav attrib in the Admin workbench. Also If you plan to use navigational attributes on standard characteristics, say in 9AMATNR, then you could have issues in SNP since SNP does not support Nav attrib
Also realignment of Navigational attributes is not a standard process but can be done.

Do I need to tell Lightroom to use the Graphics Card in my new laptop?

HI!
I have a new laptop and have successfully transferred my pics, catalogue and LR settings across.
It has better specs than my last one, including a decent (I think!) dedicated graphics card. I have always had integrated graphics before so am not sure how this works. Do I need to tell applications, such as Lightroom, to use the graphics card, or will this be automatically be done by the software/operating system? If I do need to do anything, is this in each software (like Lightroom), the computer settings, or in some third party control software?
Thanks for your thoughts.

Thanks for that. That seems a shame, although hopefully the increased CPU will help it run more smoothly anyway.
Do you know off hand whether I would need to do anything for other programs with regards to the graphics card or is everything automated?
thanks again

Std::bad_alloc occurs only when using VS Graphics Debugger

I'm using C# and SharpDX (a c# wrapper for directx) and I keep getting the following exception when using the Graphics Debugger in VS2012 and VS2013:
First-chance exception at 0x7690c41f in Craft.exe: Microsoft C++ exception: std::bad_alloc at memory location 0x3276eda4.
A first chance exception of type 'System.Runtime.InteropServices.SEHException' occurred in SharpDX.Direct3D11.dll
An exception of type 'System.Runtime.InteropServices.SEHException' occurred in SharpDX.Direct3D11.dll but was not handled in user code
Additional information: External component has thrown an exception.
I have native code debugging enabled and I'm using the directx debug device. The program runs fine normally, but when I use the graphics debugger, I get this exception almost all the time, usually pretty late in the loading phase. When it happens,
it highlights this line of code:
newVertexBuffer = new Buffer(Engine.Device, VertexDataStream, (int)VertexDataStream.Length, ResourceUsage.Immutable, BindFlags.VertexBuffer, CpuAccessFlags.None, ResourceOptionFlags.None, 0);
Like I said, this happens quite late into the loading phase, at which point this line of code has run hundreds of times successfully, and works just fine when not using the graphics debugger. Is this a bug/issue with the VS debugger or something?

Hi,
Welcome to MSDN.
The default memory allocation is the debugger heap, not the Debug CRT heap while running Visual Studio Debugger.
It can be slow if we allocate/free a lot of memory, since it will cost lots of time on this special heap.
You could refer to this
thread and this
link to get more information. There is a detailed description of debugger heap shared by “MSN” (his user name) in this
link.
In order to solve this issue, we could disable the debug heap as following steps:
Control Panel->System Properties->Advanced System Settings->Environment Variables->System Variables.
Add a new Variable called “_NO_DEBUG_HEAP” with a value of “1”.
In addition, I suggest you post this issue in this forum below:
http://xboxforums.create.msdn.com/forums/76.aspx
like this thread “Visual Studio 2012 Graphics Debugger Issue”,
since there are a lot of developers with more professional knowledge can help you.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Programs don't use nvidia graphics

Hi, my programs don't use the nvidia graphics, for example the web browsers, video converters, video players, I configured the nvidia control panel but still they only use integrated graphics.
Note: the only program that uses the graphics is Autodesk Maya 2012.

You may try the following solution.
1. Right-click on the free space of desktop and then select “Configure Switchable Graphics”.
2. Configure GPU for application
3. Assign GPU for an application by clicking the button next to it
4. Add the application that you want to specify GPU for it by clicking “Browse”
5. Click the application and then click “Open”
6. Assign the GPU for the application you have added by clicking the button next to it
7. Save your settings by clicking “Apply”
Hope, this will resolve your query,
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

NB100 help please with fan and graphics settings

Hi, I have just bought the NB100 and have a few questions I hope someone can help me with.
The fan icon goes grey or white depending on the settings using FN and F6, but I can feel no difference in the air around the right hand grill. Is it on when the icon shows white or grey? does it actually work?
My second question is about the graphic settings. The intel power option that is displayed when the graphivs icon in the task bar is double clicked appears to be disabled. There are sliders, automatic brightness, and power saving, but none can be selected, how is it enabled?
My last question is about games. I tried a few old ones that were not graphic intensive, Deus Ex, and sins of a solar empire, but I had problems getting at text boxes that needed a response, and in the case of Deus Ex it said the graphic drivers were not compatable. Has anyone had ant success with games? I travel a lot and thought I would like to have one or two installed other than card games etc.
Thanks and regards, Brian

Sorry, F6 was a typo, I meant F8. How do you tell if it has changed the speed of the fan? I wet my finger and held it next to the grill on the right hand side but could feel no difference nor hear any sound for the changes from white backgound to grey background on the fan icon.
I may have not been clear on the graphics question. On the tray there is an icon for graphic options. When it is pressed, one of the selections is graphics properties. I selected this, then on the box that appeared, I pressed display settings to see if I cold get around the scrolling problem, and saw a box "power scheme". I selected that and another box appeared called power settings, I assume for the graphics as it is called "Intel Graphics Media Accelerator Driver for Mobile". this has some greyed out boxes called Intel Automatic Display Brightness, Intel Power saving technology with a slider going from Max quakity to Max battery, and another box called Intel display refresh rate technology. All this is greyed out. I have selected varios options regarding overall power schemes in the control panel and they work OK.

Why does my Thinkpad W541 use Integrated graphics in WoW instead of the nVidia Quadro K1100m?

I have seen reviews by many people on the W540/541 and they all said they were getting around 100 fps in WoW and even the guy in this video was able to play it on high-setitngs: http://www.youtube.com/watch?v=j0j045vg3W8 Don't get me wrong I use this device for mainly professional work, but every now and then I would like to be able to play a game on it or two. thanks!

According to a number of contributors on a number of threads regarding the same subject, THIS IS BY DESIGN.
If you want to force use the K1100m on the W541, it will need to be (a) on an external monitor and (b) controlled through a dock, rather than via the video connectors on the laptop itself. According to "the specs", the laptop screen is always handled by the Intel Graphics... no matter whether the W540/W541 BIOS is set to "basic" or "advanced" graphics mode.
According to the following description of how graphics works in W540/W541 and newer machines (which is that Optimus Mode is always active, although you can select "basic mode" or "advanced mode"), you simply MUST use Optimus Mode and cannot disable Intel Graphics as you could with the W530.
Now I'd always thought that in theory for the laptop screen you can use nVidia Control Panel (3D settings) to specify which programs you want to get nVidia graphics for when those programs' windows have focus). But my experience (granted, with the W530 and not with W540/W541) is that nVidia graphics kick in (and take over for Intel graphics) reliably only when the firmware determines that graphics performance requirements justify it.
Strangely, the description of Optimus Driver behavior (below) makes no mention of the NVidia graphics ever kicking in for the laptop screen, but I thought that was how it worked. Confusing and contradictory descriptions, seemingly. You'd think that gaming applications would be just such an example of "graphics performance demands nVidia graphics", but your thread subject suggests that nVidia is NOT kicking in (I assume you're running on your laptop screen, and have probably tried to go to nVidia Control Panel to request nVidia graphics when you run WoW), which would be consistent with the written descriptions but very definitely annoying. On the W530, Optimus behavior had the K1000m definitely kicking in on the laptop screen when needed.
So apparently by design Optimus is always active on W540/W541 and newer machines. You can´t actually disable the integrated GPU at all and force the use of the discrete graphics, as you can on the W530 for the K1000m nVidia graphics via its BIOS. Here is the description of Optimus Drivers for W541, which describes Standard vs. Advanced mode, and by implication how the new W540/W541 BIOS design works:
STANDARD and ADVANCED MODE
In Standard mode, all dock displays uses Integrated Graphics as display output
and is limited to a maximum of 3 displays including Computer's LCD.
While in Advanced mode, all dock displays uses Discrete Graphics as display
output and it increases the maximum number of displays to 6 including Computer's LCD.
ThinkPad W540, W541 (Standard Mode)
Intel HD Graphics
- (Computer's LCD)
- Computer's analog VGA connector
- Computer's DisplayPort connector
- Docking Station's analog VGA connector
- Docking Station's DVI connector(s)
- Docking Station's DisplayPort connector(s)
- Docking Station's HDMI connector
NVIDIA Quadro K2100M or NVIDIA Quadro K1100M
- No display is connected to this display adapter.
ThinkPad W540, W541 (Advanced Mode)
Intel HD Graphics Family
- (Computer's LCD)
- Computer's analog VGA connector
- Computer's DisplayPort connector
NVIDIA Quadro K2100M or NVIDIA Quadro K1100M
- Docking Station's analog VGA connector
- Docking Station's DVI connector(s)
- Docking Station's DisplayPort connector(s)
- Docking Station's HDMI connector

Use of graphical settings in APO DP interactive planning

Similar Messages

Maybe you are looking for