Use of graphics card with core install

Hi,
We have a sun sparc server that has the solaris core installation. We run our Jrun application server on this machine. We would like to use a mapping software called Mapxtreme that needs a graphics card on the server. Can I use a graphics card without upgrading the core Solaris OS installation.
Thanks,
Sreeni

Well first the limit for the device is 1GB SD Card.
You can store music, videos, pictures, documents (word files, books and pdf files to name a few) and programs.
Message Edited by IrreducibleM31 on 03-13-2009 08:19 PM

Similar Messages

Cannot use seconf graphics card with Hp envy Recline

The HP recline has 2 display adapters , INtel integrated 4600 and Nividia Gt730A. I tried to force use of the Nividia card by selecting it in the nividia control panel as the default card but it does not work. I ran dxdiag and it still show intel as the default card.
I tried to run 3DMark11 buy selecting Nividia but it wont run and I gethis error message:
"Workload Single init returned error message: No outputs found on DXGI adapter"
3Dmark11 will run with either Auto or Intel graphics card selected (but with very poor frame rates )
So now I am not sure whether the GT730 is working of not or is there something wrong with DXGI? , DX11?
Advise please.

The 3D mark11 support forum informed that this is normal. Explanation is as follows:
Quote:
"This is due to how your system is set up. The dedicated video card has no outputs - it isn't connected to a monitor. Instead your system uses some fairly elaborate gaffer tape in the video driver to render things in the dedicated card, then copy them to the integrated card video buffer which then displays them to the monitor.
In systems like this only "auto" will work. It should still use the dedicated card (score should be different from using just the integrated one forced). "
End Quote:
At end of the 3DMark 11 Tests , the summary did indicate that GT730A was used . So it's not really an issue but rather the way the dual graphics cards work in the HP Envy Recline.

Can I use this graphic card with P35 V1.0

http://www.falconcomputers.co.uk/generic/website.asp?dept=63&page=productDetail&liwCode=100018024
It says PCI express 2 will it work with my P35 MS-7360 V1.0 ?
Thanks

Quote from: Henry on 17-December-09, 07:50:46
If you're referring to the one with 2 wires it is for connecting MB S/PDIF pinheader out to the VGA in S/PDIF for HDMI sound.
Yes thanks.

Usb mouse auto disconnect time and time,Screen flash and flash when I use discrete graphic card

as title
My usb mouse auto disconnect and reconnect time and time,
no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
Mouse: Logitec G400/G1
Display:Lenovo D2081WIDE
machine:T430 2349 CTO

system info:
machine TYPE: THINKPAD T430 /2349CTO
operating system :Lenovo OEM ultimate X64 SP1
mouse type:Logitech G400 and Logitech G1
time:from 2012-10 to now
threat NO.1
USB mouse auto disconnect and reconnect time and time,no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
every time when the mouse disconnect I heard the sound which like USB DEVICE unplug,and when it reconnected I heard the sound which like USB DEVICE plug in.
threat NO.2
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
threat NO.3
the battery auto losing capacity!!!!!!
1% everyday about 0.2Wh
since I bought to now,
the Design capacity has losing from 57.XX Wh to 47.52Wh
and full charge capacity is 48.68.
the battery info:
cycle count is 18
Bar-Code number 1ZKFD27S1RF
SerialNumber 1896
First used date 2012-09
FRU 45N1001
Firmware 0003-0080-0100-0165

What is the safest way or software to use to flash graphic card with ?

Hello I need UEFI GOP VBios for this card.
S/N: 602-V284 46SB 1307001929
Bios: 80.01.BF.00.30 (P2004-0010)
MotherBoard: Asus X99A - Latest Bios Installed - Version 1203 (12-2014)
If you can provide the rom:
What is the safest way or software to use to flash graphic card with ?
Thanks.

Hello, thank you for all these informations.
Right now my graphic card current Bios Version is 80.04.00.2F (P2004.0010). Is it the good one ?
I've found out yesterday evening about the GPT Drive, when I saw it on my laptop which works fine with UEFI fastboot mode.
For the moment the main drive on my desktop is MBR formated SSD.
Is it safe to clone the MBR SSD Drive to another GPT formated SSD Drive ?
In my Partition soft I saw that it can convert MBR Drives to GPT without data loss. Could this work ?
Thanks for reading me.

I'm confused about running an external graphics card with my MBP and Thunderbolt display

I have a new MBP 13" (not retina) with these specs,
Processor 2.9 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 512 MB
Software OS X 10.8.2 (12C60
My radio control airplane/helicopter flight sim runs slow. Message reads "Warning FPS to low".
I've been reading about using an eGPU but the info seems to be conflicting. Can I or can I not do this? If I can, what do I need?
This is my first Mac and with this one exception I love it. Thanks for any input you folks might provide.
John

AFAIK, there are PCIe TB adapters like this - http://eshop.macsales.com/item/OWC/HELIOSTB1/ - but I don't know that you can use a graphics card in them with a MBP. You might want to give OWC a call, though, and see if they know of someway to bypass the onboard GPU through a PCIe card.
Good luck,
Clinton

Hello i try to use another SIM card with my iphone 4s now it said i need to unlock the phone with my Sim carrier

Hello i try to use another SIM card with my iphone 4s now it said i need to unlock the phone with my Sim carrier ... here is what it says below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

So.. You need to contact the carrier for the iPhone's original sim card, and request they unlock it. The carrier is the only one that can unlock the sim of the iPhone.

I had a 'dead' iMac repaired and it needed a new HDD & graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I've no idea what this will be. Help please.

I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be. can anybody help please?
<Personal Information Edited by Host>

On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R

Can I use 2 graphic card for optimisation in adobe?

Hi, I am using Adobe CS6, Premiere pro, After effect, Photoshop, InDesign.
Current set up is Dell XPS 8700, GTX 650 Ti, 128gb Plex SSD, 2TB 72krpm HDD, 16DDR3 non-ECC ram.
I am looking to build a LGA 1366 dual xeon processor workstation.
Plextor M5 Pro as main hardisk for application cache
2x Intel Xeon X5570
16ddr3 10600Registered/ECC ram
SAS 10k rpm HDDs support 6gbps but I only using 3gbps controller (media drives)
Graphic cards:
1x Nvidia Geforce GTX 650 Ti
1x Nvidia Quadro FX 1800
Need advice on the possibility of using both graphic cards in my upcoming set up.
eg, ulitilising the Cudas on my GTX while still enabling the use of quadro fx 1800. (not sure if Quadro fx1800 can enhance the flow..)
If able, pls share some light on how to go about enabling both graphic to use in adobe
My work is mainly, photo and video editing.

Hi Stormancer,
You cannot use two different graphics cards in SLI which is the main benefit of having two cards.
As far as I am aware the FX1800 is optimised for CAD use when you state mainly editing photo and video so I can't see that card being particularly beneficial to you.
If you can afford it why not just buy a better spec single card either the Quadro or GTX?
I currently run a Windows 7 64-bit system with an i7 3700k, three SSD 6/Gbps, RAID 6/Gbps and 2300 Mhz memory with a recently upgraded GTX 680 and find it more than capable of both photo and HD video editing plus some After Effects work. I would class myself as a serious Hobbyist (with 30 years PC experience) and suspect that yes you need the latest kit if you are editing professionally because of the deadlines and high quality required but once you reach a certain level, the gains are very negligible.
While I was looking to upgrade my card, people on here suggested the Quadro K5000 mainly because I have a 10-bit NEC PA301W (25th anniversary present off hubbie) but this card was out of my budget so I settled on the GXT680 and find it more than capable for my needs. It is much faster than the old Radeon 5770 I had. However, while researching I came across this site which explains the way Mercury GPU is utilised, you may find it helpful:
http://blogs.adobe.com/genesisproject/2011/10/diving-into-nvidia-gpus-and-what-they-mean-f or-premiere-pro.html

Do I need to tell Lightroom to use the Graphics Card in my new laptop?

HI!
I have a new laptop and have successfully transferred my pics, catalogue and LR settings across.
It has better specs than my last one, including a decent (I think!) dedicated graphics card. I have always had integrated graphics before so am not sure how this works. Do I need to tell applications, such as Lightroom, to use the graphics card, or will this be automatically be done by the software/operating system? If I do need to do anything, is this in each software (like Lightroom), the computer settings, or in some third party control software?
Thanks for your thoughts.

Thanks for that. That seems a shame, although hopefully the increased CPU will help it run more smoothly anyway.
Do you know off hand whether I would need to do anything for other programs with regards to the graphics card or is everything automated?
thanks again

Imac Graphics cards with Premiere Pro cs6

Hello
I just changed over to Premiere Pro cs6 from avid and fcp 7/x. I am already sure i made the right decision. I love the interface, i really love it! and cant wait to get stuck into it properly.
I just bought a brand new, all singing all dancing 27 inch imac full spec 32gb RAM with a NIVIDA Geforce GTX 680MX 2048mb card. However pro cs6 by default is using the “Mecuary playback engine sofware only” instead of the “Mecuary playback engine Acceleration [CUDA] and i cant change it. Does it cs6 not support this card and if so will it in the future?
Any help would be greatly apericated!
Kind regards
Philip

Hi Paul
You mention last week that you had the same problem as me with your new iMac and graphics card with cs6.
I was just onto Adobe and they told me that they could not assist.
Can you tell me who you death with?
I am really keen to get this card running!
R
Philip

Can I use ATI graphics cards in SLI in MSI-7100?

My stupid-question-ometer is going off the scale, but I don't know the answer; can I use ATI graphics cards in SLI in my machine?
Also, whilst I'm at it, according to my knowledge, AMD are considered, in general, the lowest cost per unit power. Is it the same with ATI or nVidia - which generally offers best value?

And can you refine your other question, please. For one, ATI and AMD is one company now. Intel and AMD/ATI mostly have processors that in normal run are equal, but Intel has more refined top-end processors. In benchmarks Intel's normally score higher.

I cannot use my pci5112 card with LV ver. 6.0

I'am trying to use my pci5112 card with LV 6.0 using the DAQ solutions. I get a message saying that I have not configured any DAQ devices. When I launch MAX I see the card there and the test panels are ok.
I have the niscope1.6 driver installed.
Any ideas?
Thank you in advance.

The PCI-5112 can only be programmed with NI-Scope. That's why the PCI-5112 does not work with the DAQ Solution Wizard.
Fortunately, there are lots of good examples for NI-Scope in LabVIEW. You can find these in the C:\Program Files\National Instruments\LabVIEW 6.0\examples\instr\niScope directory. I would recommend starting with the Configured Acquisition example and then going from there depending on the needs of your application.
Hope this helps,
Jack

Why can't we use iTunes gift cards with family sharing? After Christmas, we now have lots of account credit we can't use. Very frustrating.

Why can't we use iTunes gift cards with family sharing? After Christmas, we now have lots of account credit we can't use. Very frustrating. There is no option found for using account credit.

I just logged out of my daughter's account and back in, and now it works. Deducted from gift card account balance. So I hope this is resolved.

Does the standard Intel HD Graphics 4000 in the 13 inch Macbook pro stand up to other graphics cards with dedicated memory ( 1GB of memory for instance)?

Does the standard Intel HD Graphics 4000 in the 13 inch Macbook pro stand up to other graphics cards with dedicated memory ( 1GB of memory for instance)? I need a laptop for college and the Engineering program suggests a dedicated video card with minimum 1GB of video memory.

I have a Intel HD 4000 in my Mac Mini (late 2012), and it's okay for what I need it.
However:
- there were a few issues with flickering on the video output to external monitors. These were solved through a firmware update that came with OSX 10.8.3 - for the majority of the users. There is apparently still a small group of users that still has issues. You can read long threads about this here:
https://discussions.apple.com/thread/4472316?start=0&tstart=0
and here
https://discussions.apple.com/thread/4490924?start=0&tstart=0
So for most of us (me included) this issue is solved, but it seems that certain displays / monitors don't work well with the intel HD4000, don't know if there is a pattern or a list of monitor models...
- there was an issue with the color calibration on the HDMI output. No matter how much you tried to calibrate, the results remained unsatisfying. All light colors were crushed to white, wrong contrast, ...
You can read about this here:
http://forums.macrumors.com/showthread.php?t=1482487
https://discussions.apple.com/thread/4480354?start=0&tstart=0
The same firmware update improved this a little, good enough for me, but I can imagine it's not good enough if you do graphic work and need reliable colors from your monitor. On HDMI output, the thunderbolt/MDP output is fine. So it's mainly a dual monitor setup issue.
If it's for graphic work, I'd go for a Mac Book Pro with dedicated GPU !

Use of graphics card with core install

Similar Messages

Maybe you are looking for