Use of High End Cooler with Msi

Hi Guys
I have a Msi Gaming 3 z97, can i put a cooler like CoolerMaster Cooler Master V8 GTS in it?. If not, what can i put in for beter cooling. I want my standard cooling gone.

Don't know what country you are in but newegg has the 9900 like mine for $34.99 after $10.00 rebate card
Free Shipping currently.
http://www.newegg.com/Zalman-Tech-Co-Ltd-CPU-Fans-Heatsinks/BrandSubCat/ID-1647-574

Similar Messages

Having mail 4.5 issues- open mail and get a new features message so I must import messages first in order to use mail 4.5. Just recently put in MAC OSX 10.6.7. Once it imports click done to start using mail, but end up with the rainbow wheel? Now What?

Having mail 4.5 issues- open mail and get a new features message that says in order to use the new features, I must import existing messages into the new version first in order to use mail 4.5. Just recently put in MAC OSX 10.6.7. Once it imports I am to click done to start using mail, but end up with the rainbow wheel of death and it also says you cannot use mail until the import is finished? Now What?

Is Mail still "spinning"? If it's been doing that for a while, I'd kill it, using either Activity Monitor or the OS X application picker. Then relaunch Mail and see what happens.
Two "by the ways":
1) Your system details mention an PPC iMac. Since a non-Intel Mac can't run OS X 10.6, you seem to have another Mac. You might want to consider updating your system details.
2) You seem to have been misled by the poor labeling of the message composition fields on this forum into trying to enter your entire post into the "subject" field. In the future, just enter a summary of your post there and the main text into the field below it.

Can i use a single ended encoder with a 7344 controller?

Can i use a single ended encoder with a 7344 controller?

The encoder inputs of the 7344 are ground referenced. So the answer is yes, you can use a single ended encoder with a 7344 controller. Signal connection should be straight forward.
If you are using a UMI-7764 for signal connections please refer to the "Encoder Terminal Block" section (page 15) of the UMI User Guide. There are drawings for the signal connections for single ended and differential encoders.
For the case that you don't have the user guide of the UMI-7764 please download it from this link:
http://digital.ni.com/manuals.nsf/websearch/AC6FAA69218C9624862567BD0061DDAC?OpenDocument&node=132100_US
Best regards,
Jochen Klier
Applications Engineering Group Leader
National Instruments Germany GmbH

Using Sony High Definition Camcorder with Premiere Elements

My computer is a HP Pavilion Intel(R) Core(TM) 2 CPU, [email protected] GHZ, 1.59 GHz, 1.99GB of Ram. It is used solely for music(SONAR and Band in a Box) and photo/video(Adobe Premiere) software and never used online. My computer says that in my C drive I have 159GB of free space, total 224GB. In my D drive I have 376MB free space, total 8.63GB.
I have Adobe Photoshop Elements 3.0, plus Adobe Premiere Elements for Windows XP. (Old versions, I know)
Up until now I've transfered and edited what I've filmed and created productions with no problem what-so-ever in Adobe Premiere Elements using my Panasonic MiniDV camcorder. I now have the Sony HD (high definition)Handycam HDR SR11 and it's much more complicated to get my recorded images transfered to my Adobe software.
I can't figure out how to capture from the camcorder directly into Adobe Premiere Elements? I'm having to transfer it to my computer hard drive first and then add the media to Adobe Premiere. I have to record in SD (standard definition) to even do that.
Also, I can't figure out why the images once tranfered into Adobe Premiere Elements, are playing back misshaped (subjects are either elongated or short and chunky)?
Am I doing something wrong?
Doesn't my version of Adobe Premiere Elements work with this particular camcorder?
Is it just a matter of upgrading to a newer Premiere for high definition/standard definition camcorders to work? If so, which one?
Thanks for any help!
Carolyn

As stated by Peter use AVCHD Upshift from VASST or upgrade to PE7.
Also you need to set up your hard drives properly.
The best way is to have 2 seperate hard drives. One small one for the OS and all your other programms and another large one for all your work. Hard drives are never to be partitioned. This slows down the workflow.

[Athlon64] Problem with MSI RS480M2-IL

Hi all,
I have problem with MSI RS480M2-IL. My problem is My temperature is very high... around 55-60c ... i am using AMD 3000+ Venice and no OC... and SpeedFan unable to detect my Voltage usage... Aida32 also same... 1 more thing is when i tried to run SiSoft Sandra 2005... it will take alot of time to load, sometime will just hang. i Test PCMark04 and found only got 3k for average mark... my friend getting 4k+ and we are using same spec... Below is my Spec:-
MSI RS480M2-IL
AMD 64 3000+ Venice E3
Bios Version 3.8
Geil PC3200 DDR400 2.5-3-3-6
Maxtor 60GB HDD 7200RPM 2mb
Verudium Power Vortex 420W
Hope some one can advised me what to do... my score too low and my board detect temperature and voltage is not accurate... Hope MSI Engineer will look thought and help me... Thank for Viewing !

the underlying "Who's fault is it?" question: AMD64 VENICE CORE (E3) PROCESSORS? or MSI RS480M2-IL MOBOS?
so far, ALL users with this proc/mobo combination HAVE the high (or incorrect) temperature issue. replacing the mobo obviously will not resolve the issue but replacing the proc with one that is NOT a Venice E3 core, does the trick. but of course, not everyone will have the privilege of exchanging their damned proce via the retailer specially if it's beyond the first 21 days of purchase.
in my case, my retailer refused to have the E3 proc replaced with the 'corrected' E6 version no matter how hard you explained the known issues with the E3. no chance of AMD recalling the E3 cores since problems with are only isolated to the particular MSI RS480M2 boards.
so for users that are and will be stuck with this combination, what is the solution then to the temperature issue? in my opinion, it's up to MSI to perhaps release a bios update that will correct this. another important thing to consider is the question: IS MY VENICE CORE INDEED OVERHEATING OR IS IT JUST THE MSI MOBO SHOWING INCORRECT READINGS? the proc overheating in actuality is obviously a lot different thatn just having an incorrect bios temp readings.
based on what i have observed, my Venice core displays the correct cpu temps (33-35*C) when being used on a MSI K8 Diamond mobo. placing the proc back to the R2480M2 board shows a very unusual 61-63*C bios cpu temp. furthermore, if i touch the stock heatsink/fan cooler that i have (for both motherboards), it really does NOT seem to be extremely hot to think that the cpu is actually overheating. in addition, my system using the RS480M2 performs well and has no spontaneous shutting down problems whatsoever. of course, my sense of touch is not as accurate as a thermometer but more or less, if you consider all the points i mentioned, most of us can say that the whole issue is just a matter of incorrect cpu reading.
perhaps the ATI chipset is the one to blame since i have notices as well that the Venice core processors do not seem to have this high temp problems with MSI's K8 mobos with the NVIDIA chipsets.
one last question: so do you guys think that this problem can be resolved by a simple bios revision? (as a dell tech guy, i do know for a fact that bios updates resolves overheating error messages in Inspiron/Latitude laptops)

Time to upgrade hsdpa to 21mbps on high ends

htc and samsung now produces high end phones with 21mbps hsdpa capability so i think nokia should upgrade next symbian^3 phone with hsdpa 21mbps downlink and 5mbps hsupa uplink capability rather than usual 10mbps hsdpa and 2mbps hsupa

I currently have a Droid Global 2 and while I enjoy the expanded features of a smartphone, I miss my Env2 terribly for one main reason : The keyboard was the best!. The Droid Global 2's slide-out keyboard lacks dedicated number keys and is a bit cramped compared to the Env, but much faster/accurate than an iPhone.
I will be upgrading to the DROID 3 as it now has dedicated number keys and a larger screen.
While I really wanted an iPhone, the lack of a physical keyboard was the dealbreaker. I test drove a friends phone and made so many errors in email, texting, dialing #s that I knew it wasn't going to be acceptable for me. It took forever to do basic texting...and I have very small hands/fingers! Can't imagine how big 'man hands' would handle the iPhone.
If keyboard accuracy/'speed is not a big deal the and iPhone will work for you. The iPhone is much lighter as it doesn't have a physical keyboard....some people just have to have Apple regardless.
Good luck on the Apple
Tony1790 wrote:
Hello,
It's time to upgrade to a new phone for both me and the wife, she needs a new phone now as her LG env3 is acting up. I'm a looong time Apple user, and of course the Apple iphone is a natural to pick, however It'll cost $350 for 2 when we use the last $50 credit for new/every 2. The new Droid 3 looks very interesting and we can get 2 for $149 for both with the credit and the BOGO sale going on.
So which should we get, mainly use the phone for talk, texting and will of course check emails, etc once we get a smart phone. The Env3's we have now are good at texting with the keyboard and of course good for talking.
If we go for the Apple, I could get her the iphone 4 for her and I can wait for the iphone 5 if it's actually coming out this year.
Tony

Is my speaker system compatible with MSI K8N SLI Diamond?

Hi!
Can I use my old speaker system with MSI K8N SLI Diamond. My speaker system is Creative Inspire 5.1 5500D Digital with decoder. Now 5.1 sound doesn't work properly. When I try look movie with PowerDVD6, center speaker is dead and no speech on movie. On PowerDVD6, SPDIF output is selected and tried also 6.1 channel options but no, speech will not play at center speaker. Some games too 5.1 surround doesn't work. I have connected my speaker system on motherboard coaxial SPDIF to speaker systems Decoder coaxial SPDIF, and speakers on that decoder. Do I have to buy new analog speaker system to get 5.1 surround working? If I connect my speaker system directly on MB analog outputs, sound balance in very bad, rear and front speaker is good but center speaker crackling and speech at center speaker sound like volume level is much too high.

Quote from: Stick on 10-February-06, 19:24:28
if you know that the speakers are working (tested on another pc) it is usually a software configuration error. if the decoder would mess up the sounds, it is unlikely that you would hear anything in the other speakers too.
My speakers systems works perfect my previous setup, when motherboard has nForce2 SoundStorm integrated chip.
Some other forums, peoples claims that this MSI k8n motherboard can't send multichannel 5.1 surround audio on SPDIF and I have to connect my speakers on motherboard analog sound outputs.

How to get Higher end macbookpro retina model in India ???

I live in India .. I want the high ended macbookpro with 16gb ram 2.7ghz processor and 768gb hard disk ... How should I order , when I went to the apple seller , they say its not available in India ... Kindly help ... I need that config

from india you cant order via online ... Anyway thanks friend

Migrate the Production APPS and DB to New High End Server

Hi,
current Low end server:
Single Node Installation: DB & APPS
Version: 12.1.1 (11.1.0.7)
Operating System: Redhat Linux 5.4 (x86-64)
We have bought new high end machine with more cpu, RAM anad More Hard Disks.
We are going to move everything from current low end server to new high end server.
1. Install Linux 64 bit on New High End Server with required RPMS, Kernel Parameters, User Limits etc etc
2. Make partitions on this server as same as current server ( Mount Points should be same as current server)
3. Make users and groups and assign proper permissions on partitions
4. Maintain same hostname and IP Address in Target Server
5. Run Preclone in both DB Tier and Apps Tier in Source Server
6. Take backup of current server and copy it to Target Server
7. Shutdown the Source Server
8. Run config clone on Target Server
9. Start the Services in Target Server, after clonining, Make sure that all services are running including concurrent managers
10. Configure Printers at OS Level with same in Oracle Applications Printers Screen
12. Copy the Backup scripts from source to target server
13. If tape drive is configured at current server, configure it new Server as well.
Please let me know, if i miss anything....
thanks in advance......

Hi oraDBA2,
It's been long time, how are you doing?
Your steps are correct and I would say there is nothing missing. Please note the mount points on the target node(s) do not have to follow the same naming you have on the source node as you are going to run postclone on the target server(s). However, keeping it the same would make it more straightforward. As long as you have all pre-req. OS packages and software installed and you are going to keep the same hostname/domainname as well as IP Address, you should be good.
An alternative would be restoring the files on the target node(s) without running preclone/postclone but this requires relinking as per the following documents.
Note: 356878.1 - How to relink the whole Applications 11i Installation
Note: 131321.1 - How to Relink Oracle Database Software on UNIX
Note: 407055.1 - Process To Upgrade the Operating System and Oracle Database Server
Since Rapid Clone is your option (which I personally prefer) you can skip this part as relinking will be done by Rapid Clone, so you do not have to worry about it.
Good luck!
Thanks,
Hussein

MSI 7900 GTO: improve cooling with Arctic Silver 5?

Would it be useful to improve the cooling of my 7900 GTO with Arctic Silver 5?
If yes, do I need to apply this thermal paste on the main chip only or also on the 6 (or 8?) other chips around the main one?
My 7900 GTO is running at 690/810 MHz. (Riva Tuner)
In 2D-mode the card reaches a temperature of about 38 degrees Celsius, in 3D-mode it reaches temperatures between 45 degrees (older game like Counter Strike: Source) and 60 degrees (newer games like Medal of Honor Airborne or Call of Duty 4).

I owe a 7900 GTX (Similar to the GTO) and it's 44C idle and after some long game session about 67C.
If your never even goes above 60C, don't EVER think about replacing the cooler; It'll only void your warranty. The 7900 GTO can easily bare 70-80 degrees. If it ever gets above 80, I would start worrying. Ofcourse 80 isn't damaging anything yet, but it could lower the life of your graphics card!
60°C is actually really low for a high-end graphics card, under full-load You even overclocked it, and still it's only 60°C!

Slow Render with High-End System?

Im currently working on a (in my opinion) high-end Windows system for video editing. The system is about 2 years old and has cost a fortune in that time. So Im expecting significantly better speed. So heres my problem:
Im working primarly in Premiere Pro and After Effects. All the media I work with are as a video imported Jpeg Sequences. Often I have multiple Sequences (up to 7 or 8) overlayed and tweaked with Dissolves and plugins like Twixtor. I also use the Adobe Dynamic Link from After Effects to Premiere and vice versa. All the footage is currently in 1080p but in future I will want to render 4K. Im aware that a 4K workflow is probably a pain in the *** so Im surely going to edit offline with 1080p. However I cant get any real-time playback with all my sequences. I ALWAYS have to render a preview to watch my edits. I dont know if Im just having too high expectations for my system, but Im kinda sure there has to be an issue for this lack of performance. Maybe the Dynamic Link is slowing my system down?
System Specs:
Model : HP Z400 Workstation 103C_53335X
Mainboard : HP 0B4Ch
System BIOS : HP 786G3 v03.15 10/29/2010
RAM : 12GB ECC DIMM DDR3
Processor : Intel(R) Xeon(R) CPU           W3530 @ 2.80GHz (4C 3GHz/3GHz, 2.13GHz IMC, 4x 256kB L2, 8MB L3)
Chipset:
     HP X58 I/O Hub 2x 2.4GHz (4.79GHz)
     HP Core Desktop (Bloomfield) UnCore 2x 2.4GHz (4.79GHz), 3x 4GB ECC DIMM DDR3 1GHz 192-bit
Graphic card : NVIDIA Quadro 4000 (8CU 256SP SM5.0 950MHz, 512kB L2, 2GB 2.81GHz 256-bit, PCIe 2.00 x16)
Harddisks:
      4x WDC WD2002FAEX-007BA0 (1TB, RAID10/SATA600, SCSI-4, 3.5", 7200rpm) : 932GB (C:)
     Intel Raid 1 Volume (4TB, RAID, SCSI-4) : 4TB (D:)
     HL-DT-ST BD-RE BH10LS30 (SATA150, BD-RE, DVD+-RW, CD-RW, 4MB Cache) : k.A. (E:)
Thank you very much in advance for your help and I apologize for any grammatical mistakes since english is not my main language.

Valentin,
I have always called a raid10 a solution for the paranoid in a hurry. It takes 4 drives to give you the capacity and performance of two disks, but gives you security by the mirroring.
Before going into your specific situation, allow me to tell something about volumes and drives, because they can be confusing and at the same time they are very important for optimal performance of a system.
Single disk, not partitioned is 1 disk = 1 volume to the OS
Single disk, partitioned is 1 disk = multiple volumes (not a good idea BTW)
Multiple disks in one raid array is Many disks = 1 volume
Multiple disks in one raid array with partitions is Many disks = multiple volumes (not a good idea either)
Each volume has a distinct drive letter for access.
Partitioning is a thing of the past and should not be used at all on modern systems.
You have to think about volumes more than about number of disks. In my current system I have 27 different physical disks but only 4 volumes. In the old one I have 17 disks and 5 volumes.
Now that we are clear what we are talking about, volumes with distinct drive letters, we can address your situation.
You have TWO volumes, C: (single disk) and D: (4 disks in raid10). Spreading the load across two volumes is more demanding and gives slower performance than using more volume, unless one or more volumes are very fast, as I tried to explain in a previous reply (remember Isenfluh/Sulwald?). If you add a SSD as you intend, you have increased the number of volumes to 3, which will definitely help performance, because SSD's are faster than conventional disks, the pagefile can be stored on the SSD, so all your performance will go up.
Compare your setup with mine with rough estimated figures:
Volume
Valentin
Harm
Transfer rate Valentin
Tranfer rate Harm
C:
1 HDD
1 SSD
125 MB/s
450 MB/s
D:
4x Raid10
1 SSD
250 MB/s
450 MB/s
E:
NA
21x Raid30
NA
2,700 MB/s
F:
NA
1 HDD
NA
150 MB/s
These figures are indicative, but do show where the major differences are. In my experience disk setup is overlooked quite often, but has a huge impact on a system's responsiveness. It is the weakest (slowest) link in the chain, afterall and with your workflow, doubly so.
But in your specific case there is something else, and that is your disappointing hardware MPE score. 100 seconds is extremely slow, even for a Quadro 4000. I would be quite normal to see a score around 8 - 9 seconds on such a system, well maybe around 12 - 13 seconds with your ECC memory, but 100 is way too slow. Some background services or processes are interfering with the hand-over from memory-GPU-VRAM-GPU-memory. This can be caused by a myriad of things, but a good starting point would be the BlackViper list of services to set to manual or disabled and taking a closer look at the processes running with Process Explorer. There should normally be less than 50 processes running.
Hope this helps.

MOVED: MSI reveals AM3+ 970 GAMING motherboard Get ready for high end AMD GAMING

This topic has been moved to MSI AMD boards.
https://forum-en.msi.com/index.php?topic=181363.0

Quote from: defetonezzzzz on 25-June-14, 19:19:45
MSI, world leading in motherboards, debuts its first AMD AM3+ socket based GAMING motherboard, the MSI 970 GAMING. Inherited with the outstanding DNA of MSI's award winning GAMING family, the new MSI AM3+ 970 GAMING motherboard features Killer LAN for the best online GAMING experience, Audio Boost 2 powered by Creative Sound Blaster Cinema2 for astonishing sound quality that gives you the upper hand on the battlefield, USB Audio Power and a whole new hardware and software design for enhanced gaming performance. Get ready for high end AMD GAMING with MSI.
Link?
http://www.msi.com/product/mb/970_GAMING.html#hero-overview
Anyone know the TDP of this board?
In a comparison it looks practically identical to the 125W G46-970a. Except the G46 has a sound optical out--the features list says the Gamer board doesn't--and the board pics confirm that. Board looks to have better software than the G46--possibly better sound output, maybe.

MSI reveals AM3+ 970 GAMING motherboard Get ready for high end AMD GAMING

MSI, world leading in motherboards, debuts its first AMD AM3+ socket based GAMING motherboard, the MSI 970 GAMING. Inherited with the outstanding DNA of MSI's award winning GAMING family, the new MSI AM3+ 970 GAMING motherboard features Killer LAN for the best online GAMING experience, Audio Boost 2 powered by Creative Sound Blaster Cinema2 for astonishing sound quality that gives you the upper hand on the battlefield, USB Audio Power and a whole new hardware and software design for enhanced gaming performance. Get ready for high end AMD GAMING with MSI.

Quote from: defetonezzzzz on 25-June-14, 19:19:45
MSI, world leading in motherboards, debuts its first AMD AM3+ socket based GAMING motherboard, the MSI 970 GAMING. Inherited with the outstanding DNA of MSI's award winning GAMING family, the new MSI AM3+ 970 GAMING motherboard features Killer LAN for the best online GAMING experience, Audio Boost 2 powered by Creative Sound Blaster Cinema2 for astonishing sound quality that gives you the upper hand on the battlefield, USB Audio Power and a whole new hardware and software design for enhanced gaming performance. Get ready for high end AMD GAMING with MSI.
Link?
http://www.msi.com/product/mb/970_GAMING.html#hero-overview
Anyone know the TDP of this board?
In a comparison it looks practically identical to the 125W G46-970a. Except the G46 has a sound optical out--the features list says the Gamer board doesn't--and the board pics confirm that. Board looks to have better software than the G46--possibly better sound output, maybe.

I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording. can you help me?

I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording. can you help me?
jacknil

I found an answer to this on another page (I was having the same problem) This worked for me:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
more here: https://discussions.apple.com/thread/5596831

What high end A/V Receivers use iTunes to stream Music, Pictures and Videos to a TV ?

I'm going to be purchasing a high end a/v receiver and need one that uses iTunes to stream music, piuctures and videos to my TV. Any recommendations?

I don't believe there is a receiver that supports AirPlay of video and photos. Many will AirPlay audio however you'll probably have to use an Apple TV for photos and video.

Use of High End Cooler with Msi

Similar Messages

Maybe you are looking for