Use of HP All-in-one C6280

Hey @all
I have a MacBook Air and I want to use my HP All-in-one C6280. I downloaded a software from the HP homepage, but It doesn't work. If someone have a software please help me.
Thanks!! Stefanie

There doesn't seem to be any software for your OS on the HP site. It looks like everything you can get for the printer installs through Apple Software Updates (ASU). All you need to do to get the printer installed can be found in the document below. Let me know what happens.
OS X v10.8 Mountain Lion: Installing and Using the Printer on a Mac with Mountain Lion
I am a printer tech for HP.

Similar Messages

Can I use a Sony all-in-one PC/TV as a second display for the G5?

I'm trying to build a pro music system out of my G5, which means that it should only have music software on it. I have an aluminum 20" display hooked up to my Radeon x800T video card, which has one DVI and one ADC jack on it. A pro music rig needs two 20" displays, at least, to display all the mixers, processors, instruments, etc. I have to use a PC for my financial stuff and need a new one. The new Sony Vaio VGC-VA 11G is their version of the i-Mac G5, it's all-in-one plus it is a 20" LCD TV with S-video and composite video in, not VGA in. If I get an ADC-to-VGA adaptor and hook that up to a VGA-to-S/video & composite adapter (all on ebay!), can I plug the output of the G5 to one of the video ins on the Sony Vaio and then use the Sony Vaio's TV as the second display (not simply mirroring the Apple display)? I guess it would be the same as using an LCD TV as a second, non-mirroring display. If it works, it's going to be cool!
Power Mac G5 Mac OS X (10.4.2) Dual 2 Gghz (not quad), 3 Megs Ram, ATI Radeon x800T 256

By reading the user's manual, it appears that is possible. Download the User Manual from this link:
http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-b-series-all-in-ones/id...
Chapter 1.1
With the computer off, turn on the monitor, button farthest to the right.
Next button to the left of the on/off button, controls the input. Cycle it until you see HDMI in.
I don't have B520, but I have an A310 and it works the same. I hope that works for you.
Good luck!
cb2011

How do you scan multiple pages to my computer using a C5580 all-in-one printer

how do you scan multiple pages to my computer using an HP Photosmart C5580 all-in-one printer?

Hi @carolpaige
I would be happy to help you scan multiple pages. What operating system, and version do you have? Mac or Windows?
You will need to save your files as PDF, and when you choose the PDF format you will see an option to have all scanned pages saved as a single file. Knowing your operating system will help me to provide you with more detailed instructions.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How do i print from internet in black ink only with my mac osx 10.5 using hp 6510 all in one

i can not get my IMAC OS X 10.5 to print only black ink from the internet, using my new HP 6510 all in one printer. HELP
This question was solved.
View Solution.

With pleasure!
Great to know it worked for you
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Anyone using a Laserjet All-In-One on an Intel Mac?

I just got an HP Laserjet 2820 all in one unit (scanner, printer, copier) for use with my MacBook Pro. My main reason for going with this model was the automatic document feeder (ADF) that allows me to put a stack of documents in and automatically create a multi-page pdf.
The problem I'm having is this: When I create pdf files, they are coming out too light. The only way to fix this is to scan all the pages of the document one at a time, adjust the contrast setting, and then scan all the pages again.
I also have a Canon Scanner (no ADF though) and it allows me to do a quick preview of a document (for contrast, etc.) and then saves these settings until I do a preview again. The result is that all subsequent pages use the optimized settings for that kind of document (pages of text with some figures) from then on.
The HP 2820 also doesn't seem to have any way to scan only part of an image (ie. a single picture on a full page). Am I missing something here?
I'm wondering if the device is not yet Intel compatible. The HP support department isn't any help.
Help, please?!
- Ron

Not that swift in the Apple world, I use a calibration puck for my screen and IT8 profiles for devices to calibrate my workflow on Windows PCs. Haven't done that YET on my Apples. What I can tell you is that the help files that show up are usually helpful in explaining how to use the utility. I noticed that when I did calibrate my screen on my iMac core duo, it wanted me to use the 1.8 standard Gamma. All my reference material and training states to use 2.2 and 6500 Kelvin for true calibration. That being said, I would only look at the HP device in the utility, make some changes, and see if it fixes your issues. If it doesn't, I'm sure there is a way to set everything back to default settings. If there isn't, just jot down where you are before making any changes. If you have calibrated your screen, the rest should be easier to adjust. If not, I feel you will be all over the board as far as settings for each device, as you don't have a standard appearance to work from when making adjustments. Good luck!
Michael
MBP 2.16 & 20" iMac Core Duo Mac OS X (10.4.5) Large Windows network & Canon DSLRs

Scan function no longer available in preferences using HP 7410 All-in-One

I have a Mac Book pro running OS 10.9.5. When I select Printers and Scanners in the preferences my HP 7410 All-in-One no longer shows a "scan" selection on my Mac Book. It only shows "Open Print Queue".
It prints just fine and I know it used to show both the "print" and "scan" selection. I don't know when this ability disappeared. Does anyone know what I have to do to get this capability back? I'm not real computer savy so I appreciate all the help I can get.
This question was solved.
View Solution.

Hi,
Click the Apple icon, then About This Mac and select Software Update.
Allow it 30 seconds, then click the top Store menu and select Reload Page.
If there is any HP or Apple update available insall it, reboot your Mac and check if you may scan then.
If the same persists install the following package and check again:
http://support.apple.com/kb/dl907
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

What is the best way to scan using an HP All-in-One? (HP Office Jet 6210)

I have a HP 6210 that I would like to use to scan into my Mac. When I needed to print to HP printers, I realized that I did not need additional drivers and could use CUPS (as I understand Linux printing stuff).
Is there any way to scan without installing HP software? I am concerned about ending up with bloated software that consumes my CPU even when I do not need it. I know I am being suspicious even before installing the software linked to below, but then with HP I have had bad bloated software experiences.
I hope some Mac experts know the answer
(http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-57691-1 &lc=en&dlc=en&cc=us&lang=en&os=219&product=421991)

This doesn't answer your question exactly, but still. I just got a HP J6480 all-in-one, and installed the HP software. I have to say that I'm impressed with the software. Previously, I have been very unhappy with HP software (for Windows) to the point of not wanting to buy HP again, but this software just works, and it does not use CPU when not in use. So, my recommendation would be to just install the HP software (probably similar to that of the J6480).

Using HP 6500 all in one and cannot print on Versacheck forms

HP 6500 All in One will not print on Versacheck forms from Microsoft Money.

Hmm, that is troubling. What operating system are you running on your laptop?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Scan error message using HP C7280 All in one Printer

I have been scanning documents successfully until recently. I am using a Mac with OS X 10.7.5 and receive the following error when using HP Scan.
The scan cannot be performed because another program has control of the HP imaging device. Try the following steps. After each step, try scanning again.
- Restart the program.
- Close all programs that may be using the device.
- Reboot the computer.
I've tried downloading multiple drivers with no success.
Any help would be greatly appreciated.
This question was solved.
View Solution.

Hello @kellycc,
Welcome to the HP Support Forums! I see when you try to scan with your HP Photosmart C7280 with your Mac running the 10.7 Operating system you get an error 'The scan cannot be performed because another program has control of the HP imaging device. Try the following steps. After each step, try scanning again.'.
Please complete the steps listed below:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you will need to install the print driver using the Apple Updates. Click on the link below and follow the on screen instructions:
Installing Your HP Printer Driver and Software for Mac OS X
I hope this helps, please let me know the outcome!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

All in one c6280

One cartridge ran dry and error message comes up saying 'ink cartridge empty'. replace or continue in black only. I have replaced the cartidge ( 2 different cartridges), cleaned the heads, rebooted, etc. This message will not go away. Computer will not recognise cartridge has been replaced. Any suggestions?

Hi,
Try following the steps described in this document
Does this help solve the issue?
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

How do I scan to Mac using HP 2540 All in one

Im new to mac and also there are no scan buttons on printer, I am trying to scan various pages to email but cannot find how to?

HI @LAB8080,
Welcome to the HP Forums!
I see that you are trying to scan to an e-mail with your HP 2540 to your Mac. I am happy to help you with your scanning!
I am not sure which Mac you are using so here are the Mac How to Scan guides:
Scanning with the Full Feature HP Software in OS X v10.10 Yosemite.
Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers.
Scan from OS X v10.8 Mountain Lion With the Full Feature HP Software for HP Multifunction Printers.
Scan from OS X v10.7 Lion With the Full Feature HP Software for HP Multifunction Printers.
How to Scan: Mac OS X v10.6.
If you don't know which version of Mac you have, please see this guide. OS X: Finding your OS version and build information.
I believe this information will answer your questions. If not, please let me know if you have any further concerns!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I own 3 ipods a g2 g5 and now g6 is there a way to use them all on one PC without losing anything

I own 3 ipods a g2 g5 and now g6 is there a way to use Sync them all on one PC without losing anything

iTunes will remember the settings for each device you connect using your account.

Scanning with an HP 3390 all-in one laser jet printer using Windows 7 pro (64 bit)

I have recently acquired a Dell Windows 7 Pro (64 bit) OS computer and was wanting to use my HP all-in-one laser jet 3390 printer and scanner. The printer software which came with my HP 3390 will work with my Wind 7 Pro OS computer, however my HP 3390 scanner function will not work using this HP driver software, with my Win 7 Pro OS. I am trying to locate the appropriate HP scanner and/or different printer drivers that will support both the printer AND scanner functions of my HP 3390 printer/scanner, while using my Windows 7 Pro OS computer. Within the HP website, I have not been able to find this type of driver software or support, as least listed as such? I was wondering, if there are maybe no dedicated or described scanner drivers for my situation, is there even another set of drivers which might be intended for other Window 7 Pro OS based computers and other HP printer/scanners, which would work for my situation as well? Does anyone have a solution to resolve this issue via HP driver software or by another method...maybe even 3rd party? Ther has to be a solution?

@ccan
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

I can't fax using HP all in one fax

I'm having trouble trying to print using HP 7410 all in one fax. When I select the printer (HP fax), the blue "Print" button changes to "Send Fax Now" , but the button turns to inactive (I can't click on it). Besides that, the "Cancel" button next to it shows cut in half.
I also have a Powerbook G4 and the same thhing happens.
I've tried Applecare with no luck.Can anyone help me to solve that ?

Which HP printer do you have?
This may work.
Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://tech.ifelix.net/1300.html
Using the Gimp-Print drivers for the HP PhotoSmart P1000 printer.
iFelix

Keep getting printer error message. Have apple compr using hp ohotosmart c4680 all in one printer.

I am having problems printing from my IMAC computer. I am using photosmart C4680 all in one printer. I have repeatedly uninstalled printer and reinstalled printer from original disc. Error message coming up when I attempt to print. Used to print from Hp officejet printer d145. I began having problems with it. I have discontinued printing from it and I have uninstalled software from that printer. Error message states "Library/StartupItems/HP All-In-One Communications" has not been started because it does not have the proper security settings" message comes up when starting up computer. How do I correct this problem?

I recommend that you take a look at the following document. It should help to resolve your issue.
hp printer/scanner/copier 900 series software/driver
Try that and let me know if it works for you or not. If it doesn't let me know what happened and I will see what I can do from there.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Use of HP All-in-one C6280

Similar Messages

Maybe you are looking for