Use of Interim Storage 917

Dear all,
In our buisness process . After GR mat. goes to 902(GR Area) it remains there until UD is done.
After doing UD, TO is created w.r.t PCN so material comes to 922(PCN AREA).
But today i read one document where they had made use of 917 interim storage type.
So please make me understand when to use 917 ?
Regards,
Rock.

> In our buisness process . After GR mat. goes to 902(GR Area) it remains there until UD is done.
>
> After doing UD, TO is created w.r.t PCN so material comes to 922(PCN AREA).
>
> But today i read one document where they had made use of 917 interim storage type.
Hi,
917 is the Quality Assurance storage type for QM relevent materials. The flow in QM-WM is after GRN they should 1st be recvd @ 917 where UD is made then proceed to PCN. 902 is unrestricted Non-QM interim storage type. You can make 917 instead of 902 which is standard SAP st type.
Regards
Shiva

Similar Messages

Interim Storage 917

Hi,
Can anyone please explain in the context of Quality inspection by the method of sampling how 917 is used??What if Quality inspection involves has destructive testing and material never comes back to Warehouse?? please explain..
Regards
Shri

Hello,
I assume that your QM is active with WM. If QM is active then system works as per following.
1.When you do GR system creates TR with 902 source storage type . This TR converted into TO with destination storage type 917& bin as a quant number.
2.You can take quality decision then system creates posting change notice & moves material from 917 to 922 & from 922 to final putaway storage type & bin.
For this you have to setup
1.movement type
2.Storage type search with 917 & Q.
Please use all the abiove hints to complet this scenario.
Regards,
Prashant

Interim storage bins creation, List of standard interim storage bins

Hi,
We need to create interim storage bins as part of cutover. can someone provide me list of standard interim storage bins to be created. Which transaction will be used to create interim storage bins
Thank you

Hi,
You can use the transaction LX20 to create interim bins.
Following interim bins will be available in the standard.
001     901    WE-ZONE
001     902    WE-ZONE
001     910    WA-ZONE
001     917    QUALITAET
001     920    UML-ZONE
001     921    UML-ZONE
001     922    U-ZONE
001     980    DUMMY
001     998    AUFNAHME
001     999    DIEBSTAHL
001     999    SCHROTT
Thanks & Regards,

Interim storage area taken in sales orders

Hi all!
The sales orders of my client is taking materials in 9** interim storage area, for example, when material is in 902 (GR area). Is there any possibility to restrict the sales order to take materials in count from this areas? Should take only from physical areas.
The release is SAP ECC 6.0
Thanks for any help.

Hi Guys
I think we are losing the thread here.
Whilst the majority of our answers are correct I think I now 'get' the issue.
When creating the Sales order and carrying out your 'check' the system is saying that there is stock available.
THIS IS TRUE the stock IS available. Your check is carried out in IM and does not see 902 or 922 or 001 or ant st type.
In IM the stock is either here or it is not.
Your choices are as follows
'Block' the stock on receipt so that it is not included.
Use inbound deliveries and put away in WM FIRST and then Post goods receipt in to IM or the simple answer is
Put the stock away in a timely manner and there is no issue but just to reiterate the stock IS available the system is not wrong and even if you set up the individual st types as suggested this just means that it will not pick from there but will not fix the issue.
I hope that this helps

Storage type 001 is not suitable as an interim storage area

Dear sir
i have find difficulty in confirmation of production order , as i am getting error of Storage type 001 is not suitable as an interim storage area
Message no. L9022
but i cant find where to configure
please help me out
regards
s.m.pandit

hi,
make assignment here,
IMG >> LE >> WM > >Activities >> Transports >> Define Movement Types....
Use mvt type 101...not 001...
Regards
Priyanka.P

Different production good receipt interim storage type by workcenter

Hello,
When a semifinished material is produced and 101 movement is performed, material is located at interim storage type 901.
As each workcenter is responsible of staging material produced on his area, in order to have an accurate control of the materials that are still pending of staging in a workcenter, we want to have a different interim storage type for each workcenter.
How can we achieve that, without using different movements types for each workcenter?
thanks a lot for your help,
Hannover,

Hi
Pls analyse the below mentioned scenario whether its suitable for your business process
In case if you receive a particular material X from work center A and material Y from work center B , that is what i meant to say is if there is a clear demorgation between materials from a particular work center (Material X will be received only from work center A not from any other work center) then you can use the special movement indicator in the material master and in the ref mvt type-WM mvt type linkage you can mention the special mvt indicator for a WM mvt type and assign the relevant storage type in the WM mvt type level config settings
In this case you need to create multiple WM mvt types not ref/IM mvt types and assign different interium storge types to the relevant WM mvt types.
Regards
Amuthan M

Interim Storage Type Configuration

Hi All
I want to find out on interim storage type configuration, if it is possible and flexible in that you are able to configure it in such a way that you are able to separate the movements into the storage types according to the diffrent commodities (material types) and within those commodities, you can separate/filter your gains, losses and adjustments. What I am looking at, at the end of the day is to be able to pull through a report of interim storage type where I would be able to see all my losses, gains and adjustments in terms of quantity sitting on the interim storage type.
Regards
Khuselwa

Hi
I am not sure what you want to see as stock in interim st types are not neccessarily gains or losses.
Interim st types are used in SAP to recognise that some stock exists and needs to be moved such as 902 for goods receipt or 921 for stock transfers.
If you have gains or losses which are created by adjustments you can use the 'Reason For Movement' field when you create the gain or loss (this field needs to be congigured) and then you can run a report MBGR to see them.
I hope that this helps

Available stock shortfall of & in Interim storage bin message in BAPI_GOODSMVT_CREATE

Hello Abapers,
I have created a Zprogram and used a standard function module BAPI_GOODSMVT_CREATE.
while processing this FM, Iam getting error messages in return table as "Available stock shortfall of & in Interim storage bin".
Please help or suggest.
Regards
Pradeep

Searching on the forum you can find threads about WM/PP interface settings.
(Re: WM Staging - Supply area to Production prder)
Whether WM/PP interface is active it depends on your config and master data as well.
You should check:
- config: SPRO > LE > WM > Interfaces > Define Production
- master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

Available stock in interim storage bin

Dear all
I Create GR Returns 161 with MIGO, I have message error
"50012541 ; available stock in interim storage bin around 1,000.000 KG below target
Message no. L9040
Diagnosis
In Customizing, the setting is such that no negative stock is allowed in storage type 916. However, this posting will cause negative stock to exist in storage bin 0000000000 of storage type 916. "
Can anyone help me ?
thanks
imron

Dear
I created cutomazing in Spro>Logistic Execution>Warehouse management>Activities>Transfer>Define Movement types :
- Movement Type = 161 (Returns PO)
- Dest                  = 916
- Shipment Type   = A (Stck removal)
- Requirement type =    B Purchase Order
- manual TO creation not allowed
- manual TR creation not allowed
And then I created TO with LT01 using move type 161 and requirement type = B
Now stock in Storage Type 916 was there with qty 1000
But When try again to Create GR (MIGO-161- PO return)
the error still "50012541 ; available stock in interim storage bin around 1,000.000 KG below target
Message no. L9040
Diagnosis
In Customizing, the setting is such that no negative stock is allowed in storage type 916. However, this posting will cause negative stock to exist in storage bin 0000000000 of storage type 916. "
Can u help me, please
thanks

Generate Interim Storage Bins

Hi,
a SAP standard system in SPRO, Logistics Execution, Warehouse Management, Interfaces, Generate Interim Storage Bins contains any storage bin ?
Best regards

Hi,
Goods transfers in the WM system are processed by means of movement types. In the definition of the
movement types, it is possible to have interim storage bins addressed. you can have these bins generated automatically
Example:
According to the definition of the WM movement type 501 (GR without Purchase order), the material is posted to the material storage bin automatically.
If you do not want to use this option, you have to create the storage bins maually using
WM-Master Data-Storage Bin-Create-Manually
Activities: Generate the interim storage bins for your warehouse numbers
Thanks,
DV

Available stock shortfall of & in interim storage bin

Hi gurus,
I am doing the movement type 261 in MIGO with reference to a reservation.
I am working with Warehouse Management and I want to know why the system is defined in automatic the storage type 100?
When I am doing the movement 261, I know that I have stock in the storage type 007 and I am putting this, but, the system is showing the following error message:
100000000026; Available stock shortfall of 10.000 M2 in interim storage bin
Message no. L9040
Diagnosis
In Customizing, the setting is such that no negative stock is allowed in storage type 100. However, this posting will cause negative stock to exist in storage bin HE01 of storage type 100.
For my storage type 100 I do not have defined any strategy in the customising.
Could you help me with this, please?
Kind regards.
SP

Searching on the forum you can find threads about WM/PP interface settings.
(Re: WM Staging - Supply area to Production prder)
Whether WM/PP interface is active it depends on your config and master data as well.
You should check:
- config: SPRO > LE > WM > Interfaces > Define Production
- master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

Clearing Interim Storage Area

Hello all,
I'm trying to clear my interim storage area because it's blocking other transactions from the SU that contains it. But I don't know what transaction I can use to clear it. This is the overview of the stock in the interim storage type.
D63 Posting Change Area
1000 1050 502 384-
1000 1050 Q 502 384
There is a negative quant and one in quality.
Any suggestions would be greatly appreciated.

1)
But the posting change already posted the positive quant to where it is physically.
First of all, please give correct information.
In your original post you said you wanted to clear the interim storage type and you also gave some kind of stock report including the positive quant.
I'm trying to clear my interim storage area...
D63 Posting Change Area
1000 1050 502 384-
1000 1050 Q 502 384
Now you are saying the positive quant is in the proper place...
2)
And I can't do a GM with the negative quant cos it's status is locked.
No one told you that you should move the negative quant.
I told you you should find a positive quant of the same characteristics and stock type and move that positive quant to the interim storage type.
Negative quant are always locked, you cannot move them.

IM-INTERIM STORAGE

where do you create a link b/w the interim storage area and the IM movement type
for example when ever i am doing the GR with 101/501 then system creates a positive quant in the interim storage area in 902
now my question is in my WM i have 10 interim storage area like 902,911,921.
how come the system knows that quant is to be genrated in 902 and not in may be 911 or 922 what is that link to specify 902 for 101/501 ?????
please provide the nav path

Rahul
The link is the movement types
In transaction OMJJ in the IMG
For each IM movement type there is a reference WM movement type so for instance if you do a 101 in IM it carries out a 101 in WM
So if you look at the node for 'Update control/WM Movement types and select for instance 201 mvt type and then go along to the right you will see the WM movement type that will be used
Then look at OMLJ and in your warehouse and mvt type 201 select it and click on the magnifying glass you will see that set in the movement type the destination is 911.
This is Standard SAP and does not need to be changed so this is how the system knows where to send stock to or even wgere to take stock from because as the 101 puts the stock in 902 then when you want to put the stock away the TR has mvt 101 in there and so it knows to take the stock from 902.
If for any reason the stock is not in 902 etc because it has been moved manually then this is why you sometimes get negative stocks in these areas because these movement types will always go to these interim st types
I Hope that this helps
Frenchy

How to download a pdf file in external storage(sd-card) not use a isolated storage wp8

i have a url for download pdf file return by webservices
and i have attach this link in hypertext button this is start a download but in browser . and when i am google for this purpose the give me "
Background file transfer
" Process and then code is also using a isolated storage but i want a external storage process Please Help me
how to download a pdf file in external storage(sd-card) not use a isolated storage wp8

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How can I use iCloud for storage without duplication problems?

I recently set up iCloud to use on my Mac and PC. With the exception of a single data file that I have stored in the cloud (as a working data file) that I use both on my Mac and PC....I want to use the rest of my 20 gigs of space on iCloud for storage/backup purposes only. However, I have very little experience with iCloud; and it doesn't seem entirely intuitive to use iCloud.
For example, if I store all of my music and pictures on iCloud, how do I stop Itunes and iphoto from duplicating the results of each music and picture file in those programs? I ask this question because I have seen iTunes act up way too many times (in other circumstances) when it creates duplicate music files.
Just to be clear, I want everything to remain on my local hard drive. I only want to use iCloud for storage/backup only. So, again, how do I stop iTunes and iPhoto from reading music and photo files once I successfully get them on iCloud? (I am thinking I have to hide the archived files once I get them in iCloud, but unsure about how I go about doing that). And here's my second question. To upload my personal music and picture files to iCloud, can I simply drag and drop them into the iCloud drive on my computer and assume they will be successfully uploaded?
My second question seems kind of basic too. But, once again, iCloud does not seem entirely intuitive to use for a beginner. For example, I recently purchased some music from the Itunes store. And while I have it downloaded on my harddrive (like I wanted it)......I don't see it on the iCloud drive (on my computer)....nor do I see it when I log into icloud.com on the web site. Thanks for any replies.

If you have a Mac signed into your account running iPhoto, you might want to check iPhoto>Preferences>iCloud to make sure Automatic Upload isn't checked. If it is checked, all new photos added to iPhoto are automatically added to your photo stream.

Use of Interim Storage 917

Similar Messages

Maybe you are looking for