Use Of LOV In Query Panel

Hi All,
I would like to have LOV in query panel one which is created using view critiria.
Kindly let me know the best way to implement this one...............
Regards
Anandkumar S.M.

Check this:
http://blogs.oracle.com/shay/2009/12/adf_query_with_parameters_and_1.html
Thanks,
Navaneeth

Similar Messages

Show lov in query panel for an attribute using = = or between operators

When we use between, greater than, less than, greater than or equal to , less than or equal to in the view criteria
On an attribute which has lov
in query panel of UI the lov does not show up for that particular attribute
How to show lov for an attribute in query panel when i am using the above operators

Does the LOV show up in basic query state?
http://blogs.oracle.com/shay/2011/01/dependent_lovs_in_an_afquery_c.html

LOV in Query Panel not refreshing

Following is the requirement ---
There is a search page which binds to a particular person say XYZ.
Author LOV is there in the query panel which contains a list of person names who have written a note for XYZ.
Now, the LOV field should refresh when we create or delete a note.
Implementation -- I have a VVO which has person id, authorid and authorName and its been ensured that personId and authorId are unique.
I am using this VVO as a view accessor and then fetching in the list of authors for a particular person in the query panel.
But, I am unable to refresh this drop down after creation and deletion of a note.
Steps taken to achieve this :
Row Level Bind Values for the view accessors have been made true.
Refreshing the VO iterator,view criteria used in the query panel and the query panel after creation and deletion of a note.
Any suggestions to resolve the issue would be of a great help.
Thanks,
Projjal

Do you see the same behaviour in the AM Tester , if yes then just setting the right ppr's of the delete button on the LOV should help.
Else try to re-execute the ViewAccessor programmatically.

How to use input box LOV in query panel (search region)

Hi,
We are having JDeveloper version 11.1.2.4.0
In one of the JSF page, we are showing some data (absences).
Requirement is to add search region at the top so that user can filter the data, based on search parameters like Business Group, Job etc.
The search parameters are inter-dependent e.g. Job is dependent on Business Group. So when user selects some particular Business Group, Job search field should show jobs for that Business Group only.
This works fine we use Choice List for both Business Group and Job.
However since there are huge number of jobs, Job choice list makes page rendering very slow.
So we tried to use Input box with LOV for Job.
But now when job is selected in the LOV popup and returned to main page, job search field shows job id instead of job name.
Please note that our base VO (AbsencesVO) contains JobId attribute. We have added List of Values on JobId, which fetches Job Name through JobVO1 view accessor.
How to make Job LOV field show selected Job Name instead of ID? Kindly advise.
Thanks,
Vivek

Thanks Timo/Bangaram, for prompt replies
Timo, the link mentioned by you talks about showing IDs (DepartmentId, ManagerId etc.) in the search region. I need to show names in the form of Input box LOV.
Bangaram, as per your suggestion I tried using transient JobName attribute. However now when I select any value in the Job LOV popup and return to main page, it shows first Job Name in the Job Name search field.
Also when I click 'Search' button in Search panel, it shows error - Attempt to set a parameter name that does not occur in the SQL: BindJobName
Please note that I have added both JobName and JobId in the List configuration as you suggested.
In View criteria, I have removed previous item (condition) on JobId and added condition on JobName.(This is required because JobId condition shows JobId search field)
I also tried making JobName dependent on JobId..still same behaviour.
Kindly advise.
Thanks,
Vivek

Failing to refresh LOV fields added in the query panel with table

Hi.. Iam using Jdev 11.1.1.2.0
I have a scenario like ..i need to add 2 cascaded lovs in search panel and clicking on search button, the result should be displayed in table form.
For example..
I have cascaded LOV fields departmentId and Firstname ,
first name dropdown values depends on the selection of value in DepartmentIddropdown. I need to add only these 2 fields in search panel and clciking on search buton , the result should be displayed in emp table.
I have achieved the same creating View criteria with 2 fields and dragging and dropping that as query panel with table. But my problem is First name lov is not populating based on department id. It is showing static dropdown list.
Please help me how to achieve this ? thanks in advance.
Regards
Alekhya.

Thanks for the reply.. actually if iam using those cascaded lovs in a form then we can set properties as u mentioned to refresh and display values correctly in the dropdown.
My scenario is like i need to use those fields in query panel header
code snippet
<af:panelHeader text="Employees" id="ph1">
<af:query id="qryId1" headerText="Search" disclosed="true"
value="#{bindings.EmployeesViewCriteria1Query1.queryDescriptor}"
model="#{bindings.EmployeesViewCriteria1Query1.queryModel}"
queryListener="#{bindings.EmployeesViewCriteria1Query1.processQuery}"
queryOperationListener="#{bindings.EmployeesViewCriteria1Query1.processQueryOperation}"
resultComponentId="::resId1"/>
</af:panelHeader>
Iam not having any field names to add properties.
Regards
Alekhya

Cascading List of Values & Query Panel

Hello all! ADF BC JDev 11
I should use Cascading List of Values in Search Query Panel. I build CLOV like in this sample http://www.oracle.com/technology/obe/obe11jdev/11/adfbc_new_features/adfbc.html .
But when i use it in Search Query Panel it does not work. :(((
I thik that i need to set partial triger on detail LOV field. How can i do that?
Help!
Edited by: Victor_V_S on 23.11.2009 7:45

Hello,
Thanks for a nice solution.
I have a similar situation.
I have a query panel with auto make name list of values returning make as name and make id into the hidden view attribute.
Based on this, i have another list of values namely auto model which is also a name field returning a name and id(hidden).
I tried choosing the auto model name field and editing dependencies as auto make id and later auto make name as well.
But i get this error in the Weblogic Log every time i selected the auto make LOV or auto model LOV and auto model does not filter based on auto name .
<SimpleSelectOneRenderer><_getSelectedIndex> Could not find selected item matching value "SomeNameViewCriteria" in QueryRenderer$2[UIXEditableFacesBeanImpl, id=null]
I have no clue how to handle this.
Any help is greatly appreciated.
Thanks.

Date & Time in Query Panel.

Dear All,
I have created a named criteria for View Object and used it for creating query panel. The problem is that it contains Date field i.e From-Date and To-Date.
Both are Bind Variables the search is executing properly but i want the search to happen on Date as well as Time(hr and min) by default it is creating Date Field in search panel to perform search with date only.
So how can solve this problem.
-Thanks.

Go to the VO where you defined the view criteria and the bind variable, select and edit the bind variable (the pencil icon on the right), select the 'Control Hints' tab, in the drop down box of 'Format Type' select 'Simple Date' and for 'Format' type 'yyyY-MM-dd hh:mm:ss'.
Recompile the model project and run the app again. In the query panel the date input should show the time as well now.
Timo

Query Panel unable to show me Radio Group.

Hi Eweryone
I am using Jdev 11.1.1.4.
I am using a Transient Attribute in my ViewObject1("Updatable = Always") with Static List of Values coming from Different View Object2.
I included this Transient Attribute in my View Criteria and assigned a Bind Variable to it.
Settings for the Transient Attribute are
in the ViewObject1 its " ControlType : Radio Group"
in its List Of Values " Default List Type " Radio Group"
to its BindVariable "Control Type : Radio Group"(i tried keeping this and not keeping this ,but no luck.)
Now in the UI side when i am using this ViewCriteria as Query Panel with table in my page,i am unable to see the Radio Group for the Transient Attribute.(ChoiceList , CombeBox with Listof Values are coming)
https://forums.oracle.com/forums/thread.jspa?threadID=2519882&tstart=0
i saw this but no help.
I really appreciate if some one helps me .Thanks in advance.

The need to override paint() is that i want to show an image for which i am trying to use g.drawimage() method in paint. I don't know whether i can show an Image in a panel or not .
The image that i want to show is in a byte[] array. For which i was previously using
ImageIcon img = new ImageIcon(buffer);
Then i took a JLabel
JLabel label = new JLabel();
label.setIcon(img);
The problem in using this method is that i am continously updating this buffer with a timer and it continously update the image on the label. This shows flickering in the display .
whereas if i use g.drawimage of paint method it does not show any flickering but then i am unable to use my other panels of Applet.
Please tell me is there any imagelabel kind of a component on which i can show an image .

Issue in query panel LOV order by

Hi All,
I am using Jdev 11.1.1.6 version and Weblogic 10.3.6 version. I am facing an issue which is explained below. I have a screen with query panel and results table.
For Ex. Say i have Name in the results table and search paramater as well. Created Name with the help of a view object with search parameter as view criteria with Order by Name. Name search paramater is created as SelectOneChoice(LOV) . Also from my first page Add button can be clicked. On clicking the button new Name value can be added. On successfully saving the New value it is getting refreshed in the table results and displaying in the correct order. But in LOV the latest value is getting added at the Last. Rest of the values are Ordered by Name.
Is it possible to display the values in the correct order in LOV after new values are getting added?
I have tried the following.
     1. Refreshing the View Object with Search Criteria.
     2. Refreshing the LOV View Object.
     3. Refreshing the Whole Page.
4. Order by in View Accessor.
5. Refreshing the View Accessor.
Note: When i totally reload the page again then it is getting refelected correctly.
Thanks.
Regards,
Deena.

Maybe you can try to reset QueryModel, something like this:
QueryModel queryModel = queryComponent.getModel();
QueryDescriptor queryDescriptor = queryComponent.getValue();
queryModel.reset(queryDescriptor);
queryComponent.refresh(FacesContext.getCurrentInstance());
AdfFacesContext.getCurrentInstance().addPartialTarget(queryComponent);Sorry, I don't have any more ideas :(
Dario

Query Panel LOV Selecting first value

Hi all,
I created a LOV to use for one of my VOs. I created it as an Input Text with List of Values. I updated the AF Table using this view to use the new list of values and it works correctly. However in the query panel for the table when you try and select a value from the LOV it always chooses the first record in the LOV no matter which one you select. The query panel is implemented as a separate pop-up/dialog for the AF table.
I'm not sure why it is working fine on the actual table but not working correctly in the query panel.
Any help is appreciated.
Thanks
Jdev 11.1.2.2.0

Found the solution to this one.. I did not specified which were the key columns in the VOs that I created to reference in the LOV.
Once I specified the key column in the VO, the LOV returned the correct value in the Query Panel too.

Cascading LOV in a Query panel (af:query)

Hi
I have a requirement to implement few Cascading LOV's in a Query panel. I have created the VO's for the LOV's with bind variable and view criteria and linked them. It works for the BC viewer. But to enable in the ADF UI, the partial trigger needs to be enabled on individual field. And the af:query encapsulates the fields and they are not exposed. Can someone help me with a solution or a pointer
Many thanks

Thanks for the pointer
Well I followed the the steps, and implemented the same for two LOV's. I'm getting "Server Exception during PPR, #1". Would be able to identify where I'm going wrong please.
FYI: I'm using a UI template that is stripped won from Oracles Dynamic tab template
1. parent LOV
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">

<ViewObject
xmlns="http://xmlns.oracle.com/bc4j"
Name="QcChiptypeVViewRO"
Version="11.1.1.56.60"
BindingStyle="OracleName"
CustomQuery="true"
RowClass="com.qualcomm.qdt.fwk.model.QdtViewRowImpl"
ComponentClass="com.qualcomm.qdt.fwk.model.QdtViewObjectImpl"
DefClass="com.qualcomm.qdt.fwk.model.QdtViewDefImpl"
PageIterMode="Full"
UseGlueCode="false">
<DesignTime>
<Attr Name="_codeGenFlag2" Value="Access|VarAccess"/>
<Attr Name="_isExpertMode" Value="true"/>
</DesignTime>
<SQLQuery>
<![CDATA[SELECT QcChiptypeV.CHIPTYPE
FROM QC_CHIPTYPE_V QcChiptypeV]]>
</SQLQuery>
<ViewAttribute
Name="Chiptype"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="42"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="CHIPTYPE"
Expression="CHIPTYPE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="42"/>
</DesignTime>
</ViewAttribute>
</ViewObject>
2. Child LOV
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">

<ViewObject
xmlns="http://xmlns.oracle.com/bc4j"
Name="QcMcnVViewRO"
Version="11.1.1.56.60"
BindingStyle="OracleName"
CustomQuery="true"
RowClass="com.qualcomm.qdt.fwk.model.QdtViewRowImpl"
ComponentClass="com.qualcomm.qdt.fwk.model.QdtViewObjectImpl"
DefClass="com.qualcomm.qdt.fwk.model.QdtViewDefImpl"
PageIterMode="Full"
UseGlueCode="false">
<DesignTime>
<Attr Name="_codeGenFlag2" Value="Access|VarAccess"/>
<Attr Name="_isExpertMode" Value="true"/>
</DesignTime>
<Variable
Name="chiptype"
Kind="viewcriteria"
Type="java.lang.String"/>
<ViewAccessor
Name="QcChiptypeVViewRO1"
ViewObjectName="com.qualcomm.qdt.model.lov.QcChiptypeVViewRO"
RowLevelBinds="true"/>
<SQLQuery>
<![CDATA[SELECT QcMcnV.MCN,
QcMcnV.CHIPTYPE
FROM QC_MCN_V QcMcnV]]>
</SQLQuery>
<ViewAttribute
Name="Mcn"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="20"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="MCN"
Expression="MCN"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="20"/>
</DesignTime>
<Dependencies>
<Item
Value="Chiptype"/>
</Dependencies>
</ViewAttribute>
<ViewAttribute
Name="Chiptype"
IsUpdateable="false"
IsPersistent="false"
PrecisionRule="true"
Precision="42"
Type="java.lang.String"
ColumnType="VARCHAR2"
AliasName="CHIPTYPE"
Expression="CHIPTYPE"
SQLType="VARCHAR">
<DesignTime>
<Attr Name="_DisplaySize" Value="42"/>
</DesignTime>
</ViewAttribute>
<ViewCriteria
Name="QcMcnVViewROCriteriaChiptype"
ViewObjectName="com.qualcomm.qdt.model.lov.QcMcnVViewRO"
Conjunction="AND">
<Properties>
<CustomProperties>
<Property
Name="displayOperators"
Value="InAdvancedMode"/>
<Property
Name="autoExecute"
Value="true"/>
<Property
Name="allowConjunctionOverride"
Value="true"/>
<Property
Name="showInList"
Value="true"/>
<Property
Name="mode"
Value="Basic"/>
</CustomProperties>
</Properties>
<ViewCriteriaRow
Name="vcrow5"
UpperColumns="1">
<ViewCriteriaItem
Name="QcMcnVViewROCriteria_vcrow5_Chiptype"
ViewAttribute="Chiptype"
Operator="="
Conjunction="AND"
Value=":chiptype"
IsBindVarValue="true"
Required="Optional"/>
</ViewCriteriaRow>
</ViewCriteria>
</ViewObject>
3. JSF page
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:messages id="m1"/>
<af:form id="f1">
<af:pageTemplate viewId="/oracle/ui/pattern/dynamicShell/dynamicTabShell.jspx"
value="#{bindings.pageTemplateBinding}" id="pt1">
<f:facet name="copyright">
<af:outputText value="2010 Qualcomm Inc. All Rights Reserved."
id="ot10"/>
</f:facet>
<f:facet name="about">
<af:navigationPane id="np3" hint="buttons">
<af:commandNavigationItem text="About" id="cni5"/>
<af:commandNavigationItem text="Privacy" id="cni6"/>
</af:navigationPane>
</f:facet>
<f:facet name="navigation">
<af:panelAccordion id="pa1">
<af:showDetailItem text=" Asset Details" id="sdi1">
<af:panelGroupLayout layout="vertical" id="pgl1">
<af:panelHeader text=" " id="ph1">
<af:query id="qryId1"
headerText="Search Criteria (Use % as wildcard)" disclosed="true"
value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}"
saveQueryMode="hidden"/>
</af:panelHeader>
</af:panelGroupLayout>
</af:showDetailItem>
<af:showDetailItem text="More Info" id="sdi2"/>
</af:panelAccordion>
</f:facet>
<f:facet name="globalLinks">
<af:navigationPane id="np2" hint="buttons"
inlineStyle="text-align:right;">
<af:commandNavigationItem text="Help" id="cni4" action="noop"/>
<af:commandNavigationItem text="Sign out"
id="commandNavigationItem1"
action="noop"/>
</af:navigationPane>
</f:facet>
<f:facet name="status"/>
<f:facet name="globalToolbar"/>
<f:facet name="globalSearch"/>
<f:facet name="globalTabs">
<af:navigationPane id="np1">
<af:commandNavigationItem text="Device Query/Update" id="cni1"
selected="true" partialSubmit="false"/>
<af:commandNavigationItem text="Asset Return" id="cni3"
action="dummy" rendered="false"/>
</af:navigationPane>
</f:facet>
<f:facet name="welcome">
<af:panelSplitter id="ps1" orientation="vertical">
<f:facet name="first">
<af:panelCollection id="pc1" defaultToolbarItemDisplay="icon">
<f:facet name="menus">
<af:menu text="Options" id="m2" rendered="false">
<af:commandMenuItem text="Printable Page" id="cmi2">
<af:showPrintablePageBehavior/>
</af:commandMenuItem>
<af:commandMenuItem text="Download" id="commandMenuItem1">
<af:exportCollectionActionListener exportedId="t2"
type="excelHTML"
title="Asset Details"/>
</af:commandMenuItem>
</af:menu>
</f:facet>
<f:facet name="toolbar">
<af:toolbar id="t1">
<af:commandToolbarButton id="ctb1"
hoverIcon="/images/view_image.gif"
text="Export to Excel">
<af:exportCollectionActionListener exportedId="t2"
type="excelHTML"
title="Asset Details"/>
</af:commandToolbarButton>
</af:toolbar>
</f:facet>
<f:facet name="statusbar"/>
<af:table value="#{bindings.QcDeviceTrackingVO1.collectionModel}"
var="row"
rows="#{bindings.QcDeviceTrackingVO1.rangeSize}"
emptyText="#{bindings.QcDeviceTrackingVO1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.QcDeviceTrackingVO1.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.QcDeviceTrackingVO1.collectionModel.selectedRow}"
selectionListener="#{bindings.QcDeviceTrackingVO1.collectionModel.makeCurrent}"
rowSelection="single" id="t2"
columnSelection="single"
partialTriggers=":::ph1 :::qryId1">
<af:column sortProperty="Serialnum" filterable="true"
sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Serialnum.label}"
id="c28" width="103">
<af:outputText value="#{row.Serialnum}" id="ot17"/>
</af:column>
<af:column sortProperty="Assettag" filterable="true"
sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Assettag.label}"
id="c7" width="107">
<af:outputText value="#{row.Assettag}" id="ot24"/>
</af:column>
<af:column sortProperty="Chiptype" filterable="true"
sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Chiptype.label}"
id="c18" width="26">
<af:outputText value="#{row.Chiptype}" id="ot27"/>
</af:column>
<af:column sortProperty="Mcn" filterable="true"
sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Mcn.label}"
id="c11">
<af:outputText value="#{row.Mcn}" id="ot13"/>
</af:column>
<af:column sortProperty="Mcnrev" filterable="true"
sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Mcnrev.label}"
id="c8">
<af:outputText value="#{row.Mcnrev}" id="ot3"/>
</af:column>
<af:column sortProperty="Assignedto" filterable="true"
sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Assignedto.label}"
id="c15">
<af:outputText value="#{row.Assignedto}" id="ot32"/>
</af:column>
<af:column sortProperty="Location" filterable="true"
sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Location.label}"
id="c24">
<af:outputText value="#{row.Location}" id="ot19"/>
</af:column>
<af:column sortProperty="Locationfullname" filterable="true"
sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Locationfullname.label}"
id="c14">
<af:outputText value="#{row.Locationfullname}" id="ot26"/>
</af:column>
<af:column sortProperty="Locationtype" filterable="true"
sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Locationtype.label}"
id="c13">
<af:outputText value="#{row.Locationtype}" id="ot28"/>
</af:column>
<af:column sortProperty="Description" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Description.label}"
id="c21">
<af:outputText value="#{row.Description}" id="ot22"/>
</af:column>
<af:column sortProperty="Assignment" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Assignment.label}"
id="c30">
<af:outputText value="#{row.Assignment}" id="ot34">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.QcDeviceTrackingVO1.hints.Assignment.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Createddate" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Createddate.label}"
id="c1">
<af:outputText value="#{row.Createddate}" id="ot15">
<af:convertDateTime pattern="#{bindings.QcDeviceTrackingVO1.hints.Createddate.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Lastid" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Lastid.label}"
id="c33">
<af:outputText value="#{row.Lastid}" id="ot9">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.QcDeviceTrackingVO1.hints.Lastid.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Lportfolioitemid" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Lportfolioitemid.label}"
id="c23">
<af:outputText value="#{row.Lportfolioitemid}" id="ot23">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.QcDeviceTrackingVO1.hints.Lportfolioitemid.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Lkeycontactid" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Lkeycontactid.label}"
id="c4">
<af:outputText value="#{row.Lkeycontactid}" id="ot11">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.QcDeviceTrackingVO1.hints.Lkeycontactid.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Fullname" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Fullname.label}"
id="c22">
<af:outputText value="#{row.Fullname}" id="ot6"/>
</af:column>
<af:column sortProperty="Status" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Status.label}"
id="c16">
<af:outputText value="#{row.Status}" id="ot21"/>
</af:column>
<af:column sortProperty="Qcemployeenumber" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Qcemployeenumber.label}"
id="c6">
<af:outputText value="#{row.Qcemployeenumber}" id="ot33">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.QcDeviceTrackingVO1.hints.Qcemployeenumber.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Field3" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Field3.label}"
id="c12">
<af:outputText value="#{row.Field3}" id="ot18"/>
</af:column>
<af:column sortProperty="Empdeptfullname" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Empdeptfullname.label}"
id="c27">
<af:outputText value="#{row.Empdeptfullname}" id="ot4"/>
</af:column>
<af:column sortProperty="Comments" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Comments.label}"
id="c10">
<af:outputText value="#{row.Comments}" id="ot16"/>
</af:column>
<af:column sortProperty="Builtby" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Builtby.label}"
id="c19">
<af:outputText value="#{row.Builtby}" id="ot20"/>
</af:column>
<af:column sortProperty="Mesbuild" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Mesbuild.label}"
id="c31">
<af:outputText value="#{row.Mesbuild}" id="ot2"/>
</af:column>
<af:column sortProperty="Esn" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Esn.label}"
id="c26">
<af:outputText value="#{row.Esn}" id="ot31"/>
</af:column>
<af:column sortProperty="Imei" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Imei.label}"
id="c17">
<af:outputText value="#{row.Imei}" id="ot29"/>
</af:column>
<af:column sortProperty="Macaddress" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Macaddress.label}"
id="c32">
<af:outputText value="#{row.Macaddress}" id="ot1"/>
</af:column>
<af:column sortProperty="Brf" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Brf.label}"
id="c25">
<af:outputText value="#{row.Brf}" id="ot8"/>
</af:column>
<af:column sortProperty="Brfrev" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Brfrev.label}"
id="c3">
<af:outputText value="#{row.Brfrev}" id="ot25"/>
</af:column>
<af:column sortProperty="Dacquisition" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Dacquisition.label}"
id="c29">
<af:outputText value="#{row.Dacquisition}" id="ot7">
<af:convertDateTime pattern="#{bindings.QcDeviceTrackingVO1.hints.Dacquisition.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Datqcmainttermdate" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Datqcmainttermdate.label}"
id="c2">
<af:outputText value="#{row.Datqcmainttermdate}"
id="ot30">
<af:convertDateTime pattern="#{bindings.QcDeviceTrackingVO1.hints.Datqcmainttermdate.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Datqcissueddate" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Datqcissueddate.label}"
id="c5">
<af:outputText value="#{row.Datqcissueddate}" id="ot5">
<af:convertDateTime pattern="#{bindings.QcDeviceTrackingVO1.hints.Datqcissueddate.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Itlqciteclass" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.Itlqciteclass.label}"
id="c20">
<af:outputText value="#{row.Itlqciteclass}" id="ot14"/>
</af:column>
<af:column sortProperty="RowID" sortable="true"
headerText="#{bindings.QcDeviceTrackingVO1.hints.RowID.label}"
id="c9">
<af:outputText value="#{row.RowID}" id="ot12"/>
</af:column>
</af:table>
</af:panelCollection>
</f:facet>
<f:facet name="second">
<af:panelTabbed id="pt2">
<af:showDetailItem text="Update Attributes" id="sdi3"
stretchChildren="first"/>
</af:panelTabbed>
</f:facet>
</af:panelSplitter>
</f:facet>
<f:facet name="innerToolbar"/>
<f:attribute name="brandingTitle" value="ITE Device Tracking System"/>
<f:attribute name="navSplitterPosition" value="450"/>
</af:pageTemplate>
</af:form>
</af:document>
</f:view>
</jsp:root>

Enabling disabling LOV in adf :query panel

I have a requirement where i have 3 drop downs which are dependent LOV's .These drop downs are binded as bind variable parameters for search through view criteria.
The first drop down needs to be enabled by default and rest will be enabled only when i select the first one, with values populating from the dependent LOV queries.
I am using adf:query panel to do the search.
Can someone please suggest me a way to fullfill this requirement.

Hi all
Even i have the same requirement.
I have a view criteria with 3 attributes based on which am performing the search.
These attributes are actually LOV's and are dependent.
I have dropped the view critieria as a af:query panel componenet on my page.
The dependent LOV's are refreshing properly on the UI also.
However My requirement is that the dependent LOV's shud be disbaled until i select the parent LOV.
Is there a way to achive this functionality?

How can I use a single query panel with two view criteria?

Hi all,
I have a requirement to allow users to change the "display mode" on a search results tree table for an advanced search page. What this will do is change the structure of how the data is laid out. In one case the tree table is 3 levels deep, in the other case it's only 2 with different data being at the root node.
What I've done so far:
1) I exposed the data relationship for these two ways of viewing the data in the application module's data model.
2) I created a view criteria in the two view objects that are at the root of the relationships, where (for simplicity sake) I'm only comparing a single field.
This is in one view object:
<ViewCriteria
    Name="PartsVOCriteria"
    ViewObjectName="gov.nasa.jpl.ocio.qars.model.views.PartsVO"
    Conjunction="AND">
    <Properties>... </Properties>
    <ViewCriteriaRow
      Name="vcrow23"
      UpperColumns="1">
      <ViewCriteriaItem
        Name="PartDiscrepantItemsWithIRVO"
        ViewAttribute="PartDiscrepantItemsWithIRVO"
        Operator="EXISTS"
        Conjunction="AND"
        IsNestedCriteria="true"
        Required="Optional">
        <ViewCriteria
          Name="PartDiscrepantItemsWithIRVONestedCriteria"
          ViewObjectName="gov.nasa.jpl.ocio.qars.model.views.PartDiscrepantItemsWithIRVO"
          Conjunction="AND">
          <ViewCriteriaRow
            Name="vcrow26"
            UpperColumns="1">
            <ViewCriteriaItem
              Name="InspectionRecordNumber"
              ViewAttribute="InspectionRecordNumber"
              Operator="="
              Conjunction="AND"
              Value=""
              Required="Optional"/>
          </ViewCriteriaRow>
        </ViewCriteria>
      </ViewCriteriaItem>
    </ViewCriteriaRow>
</ViewCriteria>
and this is in the other view object:
<ViewCriteria
      Name="IRSearchCriteria"
      ViewObjectName="gov.nasa.jpl.ocio.qars.model.views.InspectionRecordVO"
      Conjunction="AND">
      <Properties>... </Properties>
      <ViewCriteriaRow
         Name="vcrow7"
         UpperColumns="1">
         <ViewCriteriaItem
            Name="InspectionRecordNumber"
            ViewAttribute="InspectionRecordNumber"
            Operator="="
            Conjunction="AND"
            Required="Optional"/>
      </ViewCriteriaRow>
   </ViewCriteria>
3) I had a query panel and tree table auto-generated by dragging the data control for ONE of the view object data relationship that's exposed in the app module. Then I created a second query panel and tree table the same way but using the data control for the other. I'm hiding one of the query panels permanently and toggling the visibility of the tree tables based on the display mode the user chooses. Both tables have separate bindings and iterators.
This is a portion of the page definition:
<executables>
    <variableIterator id="variables"/>
    <searchRegion Criteria="IRSearchCriteria"
                  Customizer="oracle.jbo.uicli.binding.JUSearchBindingCustomizer"
                  Binds="InspectionRecordVOIterator"
                  id="IRSearchCriteriaQuery"/>
    <iterator Binds="InspectionRecordVO" RangeSize="25"
              DataControl="QARS_AppModuleDataControl"
              id="InspectionRecordVOIterator" ChangeEventPolicy="ppr"/>
    <iterator Binds="Root.QARS_AppModule.PartsVO1"
              DataControl="QarsMasterAppModuleDataControl" RangeSize="25"
              id="PartsVO1Iterator"/>
    <searchRegion Criteria="PartsVOCriteria"
                  Customizer="oracle.jbo.uicli.binding.JUSearchBindingCustomizer"
                  Binds="PartsVO1Iterator" id="PartsVOCriteriaQuery"/>
</executables>
4) I've created a custom queryListener to delegate the query event.
This is in my advanced search jsp page:
<af:query id="qryId1" headerText="Search" disclosed="true"
                  value="#{bindings.IRSearchCriteriaQuery.queryDescriptor}"
                  model="#{bindings.IRSearchCriteriaQuery.queryModel}"
                  queryListener="#{pageFlowScope.SearchBean.doSearch}"
                  queryOperationListener="#{bindings.IRSearchCriteriaQuery.processQueryOperation}"
                  resultComponentId="::resId2" maxColumns="1"
                  displayMode="compact" type="stretch"/>
This is in my backing bean:
public void doSearch(QueryEvent queryEvent) {
      String bindingName = flag
         ? "#{bindings.IRSearchCriteriaQuery.processQuery}"
         : "#{bindings.PartsVOCriteriaQuery.processQuery}";
      invokeMethodExpression(bindingName, queryEvent);
   private void invokeMethodExpression(String expr, QueryEvent queryEvent) {
      FacesContext fctx = FacesContext.getCurrentInstance();
      ELContext elContext = fctx.getELContext();
      ExpressionFactory eFactory = fctx.getApplication().getExpressionFactory();
      MethodExpression mexpr =
         eFactory.createMethodExpression(elContext, expr, Object.class, new Class[] { QueryEvent.class });
      mexpr.invoke(elContext, new Object[] { queryEvent });
When no inspection record number (the only search field so far) is supplied in the query panel, then it behaves correctly. Namely, the tree tables shows all search results. However, when an inspection record number is supplied the tree table that was created with the query panel in use (remember there are two query panels, one of them is hidden) shows a single result (this is correct) while the other tree table (the one with the hidden query panel that isn't in use) shows all results (this is NOT correct).
Is what I'm trying to accomplish even doable? If so, what am I missing?
I'm using JDeveloper 11.1.1.7
Thanks,
Bill

I ended up keeping one query panel permanently visible and the other permanently hidden. When performing a search using the table that has the hidden query panel, I seed the query descriptor for the hidden query panel using the visible query panel's query descriptor and then delegate the request:
   public void doSearch(QueryEvent queryEvent) {
      String bindingName = null;
      if(isIrTableRendered()) {
         bindingName = "#{bindings.IRSearchCriteriaQuery.processQuery}";
      } else {
         seedPartsQueryDescriptor();
         bindingName = "#{bindings.PartsVOCriteriaQuery.processQuery}";
         queryEvent = new QueryEvent(partsQuery, partsQuery.getValue());
      invokeMethodExpression(bindingName, queryEvent);
   private void seedPartsQueryDescriptor() {
      ConjunctionCriterion criterion = irQuery.getValue().getConjunctionCriterion();
      for(Criterion criteria : criterion.getCriterionList()) {
         AttributeCriterion attributeCriteria = (AttributeCriterion)criteria;
         List values = attributeCriteria.getValues();
         String qualifiedName = attributeCriteria.getAttribute().getName();
         int indexOfDot = qualifiedName.lastIndexOf(".");
         String name = indexOfDot < 0
            ? qualifiedName
            : qualifiedName.substring(indexOfDot + 1);
         ConjunctionCriterion partsCriterion =
            partsQuery.getValue().getConjunctionCriterion();
         for (Criterion partsCriteria : partsCriterion.getCriterionList()) {
            AttributeCriterion partsAttributeCriteria =
               (AttributeCriterion) partsCriteria;
            String partsQualifiedName =
               partsAttributeCriteria.getAttribute().getName();
            if (partsQualifiedName.endsWith(name)) {
               partsAttributeCriteria.setOperator(attributeCriteria.getOperator());
               List partsValues = partsAttributeCriteria.getValues();
               partsValues.clear();
               for (int i = 0, count = values.size(); i < count; i++) {
                  partsValues.set(i, values.get(i));
   private void invokeMethodExpression(String expr, QueryEvent queryEvent) {
      FacesContext facesContext = FacesContext.getCurrentInstance();
      ELContext elContext = facesContext.getELContext();
      ExpressionFactory expressionFactory =
         facesContext.getApplication().getExpressionFactory();
      MethodExpression methodExpression =
         expressionFactory.createMethodExpression(elContext, expr, Object.class, new Class[] { QueryEvent.class });
      methodExpression.invoke(elContext, new Object[] { queryEvent });
Then when the advanced/basic button is pressed for the visible query panel, I programmatically set the same mode for the hidden query panel:
   public void handleQueryModeChange(QueryOperationEvent queryOperationEvent) {
      if(queryOperationEvent.getOperation() == QueryOperationEvent.Operation.MODE_CHANGE) {
         QueryMode queryMode = (QueryMode) irQuery.getValue().getUIHints().get(QueryDescriptor.UIHINT_MODE);
         QueryDescriptor queryDescriptor = partsQuery.getValue();
         queryDescriptor.changeMode(queryMode);
         AdfFacesContext.getCurrentInstance().addPartialTarget(partsQuery);

LOV in the Query Panel is not Working

Hi Everyone,
I dont see the LOV working in the Query Panel but it works in the table region, I am able to open the LOV and search some value and when i say ok it wont return any value... Do anyone have idea on that?
Thanks

Can anyone help me on this? Am really confused....
Thanks..

Capturing data from query panel built used "ADF Query panel with table ?

Hi All,
I have a Search page built with a view Criteria.
I enter the user_name in the query panel and hit Search and the result panel shows the results.
Now If I gave a user_name which does not have any record in the VO, no data is displayed.
At this point I want to capture the user_name from the query panel and on the click of a button ("Add" button I have created for Adding Records if not present) want to navigate to a different Add page .
So how to capture the user_name from the query panel.
Any pointers ??
I am using Jdev 11.1.1.4.0
Thanks
Sumit Yadav

Hi , I tried using the impll java file and i was able to get the handle to the bind params ..
The sampl code is ..
ViewObjectImpl userRespVO=this.getSystemAdministrationUserResponsibilitySearch1();
SystemAdministrationUserResponsibilitySearchImpl provide =(SystemAdministrationUserResponsibilitySearchImpl)userRespVO;
String userName1=provide.getbind_UserName();
Thnanks
Sumit Yadav
Edited by: Sumit Yadav on Jul 7, 2011 9:17 AM

Use Of LOV In Query Panel

Similar Messages

Maybe you are looking for