Use of Max. stack factor in EWM

Dear Experts,
We have these 2 fileds - Max.StackFactor &  Rem.Vol after Nesting under units of measurement tab in EWM product master.
can you please give some hint on what is the purpose of these 2 fields?
We have arequirement restrict stacking of HUs based on maximum height (i.e stacking of multiple HUs on a TU shouldnot exceed 2 Meter).
Is it possible to acheive this in EWM usning above 2 fields?
Appreciate any suggestions.
Regards,
Shashidhar

Hi,
this field is used in product specific parameters for Means of Transport, where you can enter consumption of transportation capacity for a given stack factor.
Petr

Similar Messages

  • Max-stack-size - default_stksize

    Hi,
    First, sorry for my english ^^
    I'm new on Solaris. I installed Solaris 10 on Sun V490 . I use Core Network.
    Why with the default setting, daemons or process of the OS "don't work" like this:
    Jun 17 14:50:10 unknown genunix: [ID 883052 kern.notice] basic rctl process.max-stack-size (value 8683520) exceeded by process 353In this example I generate the error with the format command. But I get this error with other command or deamon like nscd.
    I had the same problem with the value max-file-descriptor. The values set by projmod for the system project did not seem take effect. Thus I used the "old" parameters rlim_fd_cur, rlim_fd_max. Now it's ok.
    I find this parameter default_stksize in the Sun documentation. I put this in my /etc/system file:
    set default_stksize=16384At the boot time I have no error message for the value, but the max-stack-size value is the same:
    prctl -n process.max-stack-size 130
    process: 130: /usr/sbin/nscd
    NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
    process.max-stack-size
    basic 8,28MB - deny 130
    privileged 127MB - deny -
    system 2,00GB max deny -
    nscd is in the system project:
    ps -p 130 -o project
    PROJECT
    system
    Thank in advance, any idea is welcome.
    Guillaume

    Hi Prasad,
    Block Size is the number of parallel processes that are being executed in background during the application.  This is normally a configuration activity to be configured in line with basis.
    In Block size, we enter the number of objects to be processed per block by the CIF comparison/reconciliation during data selection in SAP APO or in the partner system.
    If you increase the block size, the memory required also increases. This has a positive effect on performance. If processes are cancelled due to lack of memory, you can decrease the block size to save memory.
    If you do not enter anything here, the system determines the block size dynamically from the number of objects that actually exist and the maximum number of work processes available.
    Normally, when you execute a job in background, it picks up the application server automatically or by manually defined server.  In parallel processing, at a time, one or more job of the same identify can be triggered under this scenario by defining application servers.  But too many parallel processing activity will affect the performance.
    One needs to define the parallel processes also to control system behaviour.  The Parallel processing profile is defined for parallel processing of background jobs. You then assign these profiles to variants in the applications.
    Regards
    R. Senthil Mareeswaran.

  • How to get cm:search to use the max attribute when creating the SQL query?

    When we use the max attribute in the cm:search tag, it does not seem to honor the max attribute when creating the SQL query. However, the result returned from the tag is limited to the number specified by the max attribute. Then the tag seems to work as intended, but the performance will be sub optimal when the SQL query returns unnecessary rows to the application.
    We use the cm:search tag to list the latest news (ordered by date), and with the current implementation we have to expect a decrease in performance over time as more news is published. But we can’t live with that. We need to do the constraint in the SQL query, not in the application.
    The sortBy attribute of cm:search is translated to “order by” in the SQL query, as expected.
    Is it possible to get cm:search to generate the SQL query with an addition of “where rownum <= maxRows”?

    Hi Erik,
    The behavior of a repository in regards to the search tag's max results parameter is dependent on the underlying repository's implementation. That said, the OOTB repository in WLP does augment the generated SQL to limit the number of rows returned from the database. This is done in the parsing logic. This behavior may differ with other repository implementations.
    -Ryan

  • Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

  • SharePoint - Error_1_Error occurred in deployment step 'Add Solution': Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was rea

    Hi,
    I am Shanmugavel, SharePoint developer, 
    I am facing the below SharePoint 2013 deployment issue while deploying using VS2012.
    If i will deploy the same wsp or existing wsp
    (last build) using direct powershell deployment, the solution adding properly, but the same timeout exception coming while activation the features.  Please find the below error.
    I tried the below activists:
    1. Restarted my dev server, DB server. 
    2. tried the same solution id different server
    3. tried existing wsp file (last build version)
    4. Deactivated all the features, including project Active deployment configuration.... but still i am facing the same issue.
    I hope this is not coding level issue, because still my code is not start running, before that some problem coming.
    Please help me any one.....  Last two days i am struck because of this...

    What you need to understand is the installation of a WSP does not do much. It just makes sure that you relevant solution files are deployed to the SharePoint farm.
    Next comes the point when you activate the features. It is when the code which you have written to "Activate" certain features for your custom solution.
    Regarding the error you are getting, it typically means that you have more connections (default is I guess 100) open for a SQL database then you are allowed to.
    If you have a custom database and you are opening a connection, make sure you close it as well.
    Look at the similar discussion here:
    The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool
    size was reached[^]
    I would suggest further to look at the
    ULS logs[^] to get better insight.
    Manas Bhardwaj's Stream : www.manasbhardwaj.net

  • Use of Error Stacks when loading to a DSO

    Hi all,
    Hope you can help with the below.
    I am loading from a flat file datasource to a DSO.
    I do not want to use the DTP option 'No futher processing without master data' to identify master data errors as this causes the load to fail should an error be encountered.
    I want to use the error stack and need the errors in both the transactional data AND master data to be moved to the error stack so the load to the DSO can continue, and errors be corrected later.
    When I load the file which contains transactional and master data the only error that is sent to the error stack is for the transactional data - a 'data field' set to overwrite in the mapping.
    However all Key Fields are master data and the errors are not being reported as well, they are flowing through to the DSO and only being reported when we try to activate the DSO.
    So how can I get master data (Key Field) errors to also be moved to the error stack ?
    Many thanks.

    I think its not possible.
    Check this doc http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10c6c05c-89c4-2c10-89bd-fc5ce1d124e2?quicklink=index&overridelayout=true
    It defines a way to handle these records.

  • How to use Toshiba Bluetooth stack longer than 30 days on 3rd party computer

    Sorry if this is back to basics.
    I have a Dell Latitude 610 with Bluetooth built in and driver versions 3.03.
    When I try to connect my Nokia via PC Suite it says the drivers are old version and should be 7.0plus.
    How do I get updated drivers that last longer than 30 days?

    Hi
    You should check this Toshiba BT portal and the HowTO section:
    http://aps2.toshiba-tro.de/bluetooth/?page=howto
    There you can find this document:
    http://aps2.toshiba-tro.de/kb0/FAQ81021V0000R01.htm
    It says that you have to use the BT stack/driver from your notebook manufacturer!
    Cheers

  • Use of max stock level w/o lot size HB

    hello champs..
    need  a help on below functionality
    Can I have the functionlity of max stock level without using "lot size - HB" in material master.
    my requirement..tht system should not create any procurement proposal if stock reachs at max level..
    but with this i am using min lot size also..and this functionality got vanish if I use "lot size=HB" ..system dont see min or max lot size..it just create the proc proposal for the qty upto max stock level..
    my requirement
    for a material max stock level -100
    min lot size - 50  , max lot size 80
    and if my stock is 30 ,and my reuirement is for 80..system should not cross the max stock level and should create the prc proposal for 70 only..
    pl share your thoughts on this..I'll appriciate wih necessary reward points..
    Br
    Sumit

    Hi
    thanks for reply..but i am not sure whther w/o using HB max stock level will be considered or not..
    i yet have to test the same but as per SAP , if you want t maintain themax stock level in the plant , lot size should be EX
    is this undertsnding is okie..
    thx in advance
    BR
    Sumit

  • Use of MAX function in Query Designer

    Dear all,
    i want to create a report that gives ONE line per period that holds the MAX of several lines per period. So NO addition of the KF but just one line item.
    I tried to use the MAX function and/or MAX drop-down boxes via properties on KF,
    but they all provide the wrong result (mostly the MAX after summaction of the KF).
    Any ideas ??
    Greetz,
    Herman

    Hi Herman
        Please check the KF infoobject property which might have been set to Summation.  You need to change the property of the KF to MAX if you wish to have MAX value. 
        Hope this might be helpful to you
    Thanks
    Kishore Kusupati

  • Can I use Count, Max function in PLSQL BLOCK.

    Can U help me to use count, max function in PLSQL BLOCK.
    Because it is giving me error "It is a SQL function"

    SELECT COUNT(*)
    INTO l_variable
    FROM dual;
    Will work inside PL/SQL

  • How can I log BT device IDs names in a log file using Toshiba BT stack

    Hi,
    without Microsoft stack I can't use a lot of freeware programs (BluetoothView.exe, BluetoothCL.exe, BTScanner for Windows) to "catch" bluetooth devices in a log file.
    How can I log bt device ids/description names in a log file using Toshiba Bluetooth stack?
    Thank you

    I've just contacted Toshiba here:
    http://aps2.toshiba-tro.de/bluetooth/?page=faq/sdk
    There are other solutions for Windows XP or Toshiba SDK is the only one?

  • Does use-new-list-stack CMD +/- work in Grid View?

    With the use-new-list-stack dock setting, does CMD +/- shrink and enlarge icon sizes in Grid View?  From what I can see, it seems to work in List View, but not Grid View.  But I've read reports to the contrary that claim this works even in Snow Leopard.  So, I'm asking. 

    In Lion, Command + and Command - will enlarge/reduce the displayed icons in a Dock folder set to Grid view.
    I could not get the same action in Snow Leopard.

  • Using SELECT MAX to default to certain days

    Gurus,
    Right now, I use SELECT MAX("File Date"."Date")FROM "Subject Area" to pull the most recent date available. I'd like for this to pull the last two or three days of data available. Any suggestions?
    I have this set under a report filter for the analysis. Thanks in advance!

    Try this
    SELECT File Date.Date saw_0, TOPN(File Date.Date, 3) saw_1, Facts."#Sales" saw_2 FROM "Subject Area" ORDER BY saw_0
    Let me know updates
    Edited by: Srini VEERAVALLI on May 6, 2013 5:10 PM
    Your initial post talks about logical query from OBIEE, so I've logical query. try to put that in answers instead of running in Toad or sql developer etc..
    Edited by: Srini VEERAVALLI on May 6, 2013 8:20 PM

  • Invalid TLS index used for current stack trace.

    Post Author: KBenjamin
    CA Forum: Older Products
    In Visual Basic 6.0, when I run this line of code to create an instance of CR 8.5: Global G_objCRApplication As CRAXDRT.Application
    I get this error: Invalid TLS index used for current stack trace.
    How do I fix this?

    Hello Don,
    Crystal Reports 8.5 was retired long before Vista was released.  Mixing in other CRPE versions wouldn't be supported to work in your application.  Business Objects SAP won't go back and update earlier versions of Crystal Reports (like CR8.5) for Vista support.
    CR XI R2 with later service packs is supported on Vista, however using direct API calls (e.g. PEOpenEngine) was retired after CR9.  It is unlikely that you'll be able to upgrade your application to CRXIR2 without a major rewrite to move to the Report Designer Component (RDC).
    Note that CR2008 doesn't ship with the RDC.  The recommended upgrade path is to move to the .NET platform.
    Sincerely,
    Dan Kelleher

  • No more use-new-list-stack?

    Oh boy, this one is going to hurt.  The List view is thew only Dock view I can tolerate, and ever since Lion I've been implementing the use-new-list-stack option that allows items to be dragged out of List view the same way they can be from Grid and Fan view, along with allowing icon resizing and a narrower stacked hierarchy view.  And it looks like the old command:
    defaults write com.apple.dock use-new-list-stack -bool YES && killall Dock
    is no longer working.  Please tell me someone knows of another way.  Not sure why it never became the default.  Please.
    -Rob

    In Lion, Command + and Command - will enlarge/reduce the displayed icons in a Dock folder set to Grid view.
    I could not get the same action in Snow Leopard.

Maybe you are looking for