Use of new external drive

I just bought an external dual-layer burner (with a firewire connection) and have it hooked up to my eMac, which has an internal single-layer superdrive. I want to burn dual-layer DVDs using this new drive, but I can't find anything in the DVD Studio Pro menus (or manual) that tells me how I can bypass the internal drive in favor of the new external one.
Did I just waste my money on the new drive?

Welcome to the boards.
When you go to the build and format dialog, is the drive showing up in DVD SP as a device (should be in the pulldown at the bottom)? If so, you should be good to go (althouth there are other ways also of burning.) Just build the project and format to the drive (making sure you have everything else set properly for a DL disc, such as layer breaks)

Similar Messages

Using a new external drive

I have new WD external drive. What must I do before using it.
Thanks!
Pat

As far as Time Machine, it for backup. You can read about it here...
http://www.apple.com/macosx/what-is-macosx/time-machine.html
You should always have a backup, so I suggest you either use SuperDuper or CarbonCopy Cloner for your backups, or begin using TM.
-mj
Message was edited by: macjack

I have an iPod G2 with a firewire 400 lead. how can I attach it to my new 13 inch Mac book Pro, is there a 400 to 800 firewire converter. USB lead wont work with the Macbook Pro. iPod used as an external drive to archive memory cards on the go.

My G2 iPod that I use as an external drive to archive memory cards on the go cannot link with my new 13" Macbook Pro cause it uses a firewire 400 lead. It will not work with a USB lead. Is there a firewire 800 ipod lead or converter available? Can any one shed some light on this please?

As far as I know, if a harddrive works with a Macpro, it should work with the Macbook: if your Macbook is low on power, plug in the AC adapter
If your Macbook has a firewire port, then it should be fine. BUt i would do somemore research first.

Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

HT201250 Do you need to use a new external hard drive or an erased one to back up once you upgrade to OSX Lion? My time capsule fails ever since I upgraded the new program to my old mac.

I have not been able to back up in Time capsule since I upgraded my mac to MAC OSX Lion 10.7.5.
Do I need a new external drive or an erased drive to get it to work with the lion software?

Either new or an erased drive is fine, as long as it is formated Mac OS Extended (Journaled).
By the way: I find that Carbon Copy Cloner is a much simpler and efficient "clone"(backup) solution, especially if you're using an external drive.
http://www.bombich.com/

I recently purchased a new iMac with an external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. Comments? Help?

I recently purchased a new iMac with an 1 Terrabyte external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. I have not downloaded the external drive's software onto my old Mac because of this concern. May I simply "drag and drop" the contents I want transferred to the external drive, then set up my new Mac with the drive and download there? or is there a better procedure? Comments? Help?

If your intention is to copy a just documents and data (word processing files and music for example) then yes, you can use drag and drop. If you want to transfer data and applications and permissions, it would actually be easiest to connect the drive to your old computer and turn on TimeMachine. Once TM is finished, connect the drive to your new computer and restart it holding the option key to get into Recovery mode. Then you can use the restore from TM option to transfer your data and programs to the new computer.

Can I transfer photos from old macbook to iMac and put all photos on a new external drive without losing any photos?

Had to purchase new Macbook so all devices could sync with Yosemite. I use iMAC and Macbook with iPhone, etc. I have many photos over years and do scrapbooking. I want to preserve my pix on an external hard drive and organize them. I am currently using external drive on iMAC and a separate one on Macbook that is outdated. I use them with TM for backup. Can I transfer pix data only to the iMAC via a transfer cable and then send all photos to new external drive for access and safe storage? I am confused about backup not preserving my photos. Help please me transfer and save my pix and properly set up my external for access. Thanks a bunch!

connie,
I assume you are storing your photos in an iPhoto library, since you are asking in the iPhoto forum?
if you want to store your iPhoto library on an external drive and keep them safe, you need two external drives. One drive to store the working copy of the photo library, that you are using to work with your photos, and one drive for time machine to make back copies of your iPhoto library.
Can I transfer pix data only to the iMAC via a transfer cable and then send all photos to new external drive for access and safe storage?
You could simply plug your new drive into the MacBook and copy the library from the old drive to the new. Then connect the new drive to your iMac and use the iPhoto library there.
Make sure, your new drive has the correct file system - MacOS Extended (Journaled) . See this link: iPhoto: Issues with FAT32-formatted drives
-- Léonie

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.
When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial.

Hi I'd like to jump in here. Your app showed me this:
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
          Destinations:
                    Plastic Wrapper [Local] (Last used)
                    Total size: 999.86 GB
                    Total number of backups: 64
                    Oldest backup: 2013-07-24 23:25:11 +0000
                    Last backup: 2013-11-17 01:40:47 +0000
                    Size of backup disk: Too small
                              Backup size 999.86 GB < (Disk used 453.81 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
          /sbin excluded from backup!
          /usr excluded from backup!
          /System excluded from backup!
          /bin excluded from backup!
          /private excluded from backup!
          /Library excluded from backup!
          /Applications excluded from backup!
Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
Thanks,
Darcy

How to move Event (not necessarily connected to Projects ) and projects to new external drive

I am running Snow Leopard 10.6.8 and iMovie11 9.0.4 have a had very stressful time trying to clear down the Movies folder from my internal drive and get it across to a new external hard drive, as my 700gb drive on my 2009 iMac is practically full. I have taken a full back-up and also created a new 1.5 TB partition on the external drive. However I do not know how to get the Events and Projects across, and for iMovie to know that every thing is now on the new drive.
Initially I copied the 2 folders using finder, which seemingly worked but then I discovered that iMovie did not display the the new events, so I deleted the 2 folders from the external drive and tried manually moving the events in iMovie. This was very slow, with lots of spinning wheels and eventually iMovie crashed. So I moved the new Event copies I did manage to create into trash, but still iMovie was crashing.
I then, thinking something had become corrupted, I tried to restore the Events folder and Projects folder from my backup, but that did not work as I got a message saying the there was not enough space to do the copies (why does it need extra space as I assume it would be overwriting the existing folders ?). So in desperation I did some forum searching and ended up deleting the com.apple.iApps.plist. Now iMovie seems to be working fine, and is displaying al the events from my internal drive (I have ejected all other drives), and I am back to square one (hopefully), however for some reason the 'month' folders I had previously created in each Event 'Year' have disappeared and all the, for example 2013 events, are now under the 2013 folder with no Month sub folders( I assume this is something to do with the preferences I had deleted ?)
I am hoping someone can direct me on the right path for getting the Events (not all of which are used in Projects) and Projects across to the new external drive, so I can free up space on the internal drive (and install Mountain Lion - my end goal).
I have been trying to do all this since 0600 this morning, so if anyome can help it would be very much appreciated.
Jim (now grabbing a much needed beer !)

Do the external drive show up in iMovie 11?? I just drag and drop in iMovie and don't touch it or change in finder.

Mac no longer sees old external drive, or new external drive

I have been using a Seagate external drive for months. All of a sudden, my Mac doesn't see it in Finder (Or Disk Utility), and no longer mounts it. I bought a new Drive today and when I plugged it in, my mac doesn't see the new drive either. (WD My Book) I have seen a lot simular threads but nothing is working for me. Any help would be greatly appreciated

Does the time machine volume meet the requirements?
-internal drive, not start up disk
-XSAN volume
-USB drive
-fire wire drive
-eSATA drive
-network server via AFP (from machines running Leopard), including machines running file sharing
the volume must be formated as Mac OS Extended or Mac OS Extended (case-sensitive)
You can't use:
-Boot Camp partition
-iPod
-disk image
-AirPort Disk
-iDisk

New External Drive connected to Time Capsule moving files problem

I have a late 2009 13" unibody MacBook Pro, that I primarily use for video editing/converting. I use my Time Capsule as a network through which I can connect to my external hard drives via USB for videos and such. I've used at least two other external hard drives along with my Time Capsule for a year and a half with very few problems, aside from the inevitable crash of one. Before yesterday, I had a 1TB Western Digital MyBook (http://www.wdc.com/en/products/products.aspx?id=210) and a 2TB Verbatim Desktop HD (http://www.verbatim.com/prod/hard-drives/desktop/usb-2.0/) connected through my 1TB Time Capsule and aside from the Verbatim drive being rather sluggish most of the time, everything was working fine.
Yesterday, I got a new external drive, an iOmega MiniMax 2TB (http://go.iomega.com/en-us/products/external-hard-drive-desktop/ultramax-minimax /minimax800/?partner=4760). I spent yesterday and most of today moving files around and whatnot through a wired connection (iOmega via firewire 800, Verbatim via USB, MyBook via USB, and Time Capsule via Ethernet), and everything moved quickly and without any problems.
I hooked my Time Capsule up to my modem, plugged in the iOmega and Verbatim drives via USB to the TC, and started my laptop. When I opened the drives, everything was working fine... And then I tried to move a file to the iOmega drive... I was moving an episode of The Killing. I dragged it into the folder and went to Safari to look something up and suddenly realized ten minutes later that I still hadn't heard the noise telling me that the file had finished. I looked at the move dialogue box and it said "156.8 MB of 323.8 MB - About 10 Seconds". I watched it for another ten minutes and it didn't move. So I clicked cancel move and the rainbow wheel of death came up and I had to force reboot my computer.
When I restarted, I opened up finder to access the drives through my Time Capsule, and it "failed to connect" to my Time Capsule. So I went back into my office to flip the switch on the surge protector in order to restart the process. I turned on my computer and I had no problem accessing my hard drives... Until I tried to move an episode of United States of Tara into the iOmega hard drive. This time, it said, "192.5 MB of 202.6 MB - About 5 Seconds" and completely stopped moving again. And the same thing happened when I clicked the little grey "x" to cancel the move.
I repeated the process several more times with no luck. Then I thought it might help to see if it does the same thing with documents. So I dragged just a random document to the iOmega and it took about 30 seconds, but it did it successfully. So I tried to move the episode of The Killing again and I let it go for, like, 25-30 minutes. After this time, I got a notification from finder saying, "Finder cannot complete the operation because some data in "[the file]" can't be read or written. (Error Code -36)". Then when I went back into the "Shared" part of the sidebar to go back into my Time Capsule folder, it said "Connection Failed"
So what exactly does this mean? Are the Time Capsule and iOmega not compatible? Can I only move the files through a wired connection [which would be unfortunate]? Do I need to rejigger the USB configuration? Is the error code just for these two episodes and it's just a random coincidence that it happened the day after I got a new drive?
Thanks for any help anyone can give me!
- Alex

I have attached the macbook to the tc via ethernet cable. Should I turn off my wireless connection or will itunes recognize to go with the faster connection on it's own?
You MBP will try to connect based on the order of the list of network devices on the System Preferences > Network window. If Ethernet is not at the top of the list, then go ahead and temporarily disable AirPort.
After all this is done will the wireless connection be fast enough for normal itunes operation?
For audio streaming it should be, but just be aware that your iTunes host will have to get the audio source wirelessly from the TC, which in turn will have to get the data from the USB hard drive. Finally, the iTunes host will have to wirelessly stream the iTunes audio via AirTunes to the AirPort Express.

Can I use a 2tb external drive with Time Machine to backup my Mac Mini (256gbSSD + 2tbHDD)?

Can I use a 2tb external drive with Time Machine to backup what I have on my Mac Mini?
My Mac Mini has one 256 SSD and one 2tb HDD. I want to use Time Machine to do a backup of everything.
Would an external 2tb My Passport Drive by Western Digital work for the backup?
It seems like it would not work because the total storage on the Mac Mini is 2304 gigabytes (SSD + HDD).
And the external Western Digital drive is only 2048 in gigabytes versus 2304 gigabytes the Mac Mini has.

No. A Time Machine backup drive should have at least twice the capacity of the drive it backs up. You would need at least a 4 TB backup drive for Time Machine.
Might I suggest as an alternative that you not use Time Machine but a third-party backup utility that simply overwrites older files with new ones such that the backup drive can be the same capacity as the drive backed up.
Suggested Backup Software
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

I just purchased an external disk drive to store my pictures. I want to keep the last 12 months of pictures on my iMac and move the rest to the new external drive. As new pictures are added I want them to be put on the iMac internal drive. How?

I just purchased an external disk drive to store my growing number of pictures. I want to keep the last 12 months of pictures on my iMac and move the remaining pictures to the new external drive. As I take more pictures I want them to be put on the iMac internal drive. Every 3 to 6 months I would then move some additional pictures to the external drive. I am nuervous about losing any of the pictures and want to make sure I follow the proper procedure. What is the right way to handle this?
Thanks.

Here's one way to do what you want:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager

I need to format a new external drive, then need to copy old external to new external

I need to format a new external drive, then need to copy old external to new external

Use the Disk Utility in the /Applications/Utilities/ folder to erase the new drive. If the old external drive doesn't contain a bootable Mac OS X system or a Time Machine backup, you can just drag its contents to the new drive. If it does, use software such as Carbon Copy Cloner or SuperDuper.
(69605)

New external drive... time machine?

I'm setting um my new external drive, which I bought to back up iPhoto and iTunes for the most part. When I plugged it in, a prompt for Time Machine came up first.
Should I use this as back up if I want to use my external drive or no? I have never used TM up till now, so I'm not sure...

Well..I got a new external and said yes to Time Machine. Now it appears I can't use the external in any other machine! I was hoping to back up my old iBook and clean it out, and use the external at Uni as well as home.
Maybe I am just not doing something right, but I don't want my external to be exclusive to my iMac at home. Is this what is supposed to occur? Can I de-Time Machine my external?
(Sorry to butt in on your question with further questions, but I figured the issue I'm bringing up might be relevant in your deciding whether or not to Time Machine)

Use of new external drive

Similar Messages

Maybe you are looking for