Use of OSS note

how to Access OSS note? what is use of OSS note?

The transaction code SNOTE is used to implement OSS Notes. With the SNOTE transaction, it is no longer necessary to register ABAP objects such as report function modules etc. manually. But data dictionary objects such as screens, tables need to be modified manually by registering them in OSS system.
In order to use the transaction code SNOTE, the relevant transport which implement this transaction in the system need to be transported. Please refer to the SNOTE guide available at http://service.sap.com
this pdf will be helpful
http://www.sappoint.com/basis/snote.pdf
Transaction Code 'SNOTE'
What are OSS Notes - Online Service System
Re: Regarding OSS Notes
How to apply OSS notes to my R/3 system?
http://www.sap-img.com/basis/oss-notes.htm

Similar Messages

How to apply OSS note and how to use it?--thanks

Hi, morning all,
I want to know how to apply OSS notes and how to use it, pls help me.
Thanks.

Applying OSS note is a critical activity in the system. Usually this task is carried out by the basis, as they maintain the system and the notes, support packs, etc.
A OSS note has potential to impact the system in several ways. So it is better to work with the basis if you need to apply a OSS note to be applied.
Transaction code is Snotes. But pl dont attempt to apply by yourself.
Reg your other question as how to use the OSS note, there is nothing like using aOSS note. Just apply and depending on what the notes do, it may change the config, or download a program or something.
Ravi Thothadri

OSS notes issue

Hi Experts,
I got one OSS note : 653949 for missing some standard structures in system.
I understood that this Notes is mainly for the extneding the BAPI listed in that OSS note for adding some parameters.
That importing parameters will be referred by those structures for which I am looking for. Both the structures creating is part
of OSS implemention but I need to have only both structures in my system. Don't want remaining part.
Here, I have doubt that how can I use this OSS note for my requirement. Will it work properly If I siimply create with the
access key i.e. partial implementaion of that note OR anything else I need to take care of .
Structures : DMSCLS_SEARCH_OBJECTS and DMSCLS_SIMPLE_SELECTION
Can you please suggest me ?
Thank you in advance.

Hi,
In your scenario you can go only with Table Implementations, as there are no dependencies.
Thanks.,
Anitha A

Use solution manager to create customer message and apply oss notes

Hello All,
Is it possible to use SAP Solution Manager to create/ open Customer Messages and for the application of OSS notes in satellite systems via solution manager?
Currently, our Solution Manager system is bieng used for Central System Monitoring!
Please let me your your expert thoughts!
Thanks,
Antarpreet

Hi,
By using Service Desk scenario of Solution Manager you can convert an issue to an OSS message and follow it up.
Refer the [Link|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Snote application is also integrated with this Service Desk, you can apply SAP notes to any satellite systems.

OSS note 1480794 for the "Steps to Create endpoints using a "Business Conf

Hi All,
I am nearly complete with the Duet Setup Wizzard but I do still have a few red lights on my check tool.
My main problem is:
When I follow the instructions in OSS note 1480794 for the "Steps to Create endpoints using a "Business Configuration Scenario" XML:"
When I press activate I get the below errors:
Unknown webservice definition with name CustomerERPBasicDataByIDQueryResponse_In_V2 / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPRelationshipContactPersonByIDAndContactPersonInternalIDQueryResponse_In / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPBasicDataUpdateRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPRelationshipContactPersonCancelRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPRelationshipContactPersonCreateRequestConfirmation_In / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name CustomerERPByIDQueryResponse_In / http://sap.com/xi/APPL/SE/Global
Unknown webservice definition with name CustomerERPRelationshipContactPersonUpdateRequestConfirmation_In_V1 / http://sap.com/xi/APPL/Global2
Unknown webservice definition with name MaterialBasicDataByIDQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
Unknown webservice definition with name ProductionBillOfMaterialVariantItemByVariantIdentifyingElementsQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
Unknown webservice definition with name ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In / http://sap.com/xi/EA-APPL/SE/Global
I have restarted the Wizzard a few times to check my setup and I cant find any steps that I have missed that would cause these error's.
Hope you can advise.
Many Thanks
Mike

Hi Sameh,
do you want to go live with the full scope of Starter Service , or do you just needs part of it?
With the steps outlined in the blog everything is 100% supported (this is not a hack, but just another way to configure Starter Services).
However, not all the functionality of the Starter Services will work (e.g. like the Updating / Creation of a new contact). But if you do not need that you are perfectly fine.
I remember that with EhP4 you need to be on SP06 of ECC-SE. Maybe this is also the reason in your case why the service is not available.
Regards,
Holger.

What is OSS Notes? where it is useful?

What is Expansion of OSS Notes? What is it? where it is useful?
Please give detail description and any related documents on that

Hi,
OSS NOTES : ONLINE SERVICE SUPPORT.
SAP Notes give you instructions on how to remove known errors from SAP Systems. They include a description of the symptoms, the cause of the error, and the SAP Release and Support Package level in which the error occurs.
Depending on the type of error, an SAP Note may also include:
· Workarounds
· Descriptions of how to correct repository objects in the ABAP workbench, known as correction instructions
· Links to Support Packages that solve the problem
You can access SAP Notes both from the SAP Service Marketplace and SAPNet - R/3 Frontend.
You can raise an OSS note if you feel there is some error in standard functionality or program.
Visit the following link for information regarding SAP Notes:
http://help.sap.com/saphelp_nw04/helpdata/en/b8/3cf839fd35384de10000000a11402f/frameset.htm
Thanks.

Object key is necessary to imp. OSS note using note assistant

Hi,
Anybody can tell me is it necessary to obtain object key from SAP before implementing oss note, using Note assistant.Im not clear with object key, let me know about object key.
bi,
vijaya kumar

As far as I know, no object key is required to implement OSS Note, using NOTE Assistant.
For more information on Note Assistant, go to http://service.sap.com/notes
There are a couple of tutorials available along with user manual.
You will find that useful.
Regards,
Subramanian V.

Oss note problem

Hi ,
i applid oss note 1046758. to 2 include and 1 program
includes:
    J_1IEWT_CERT_TOP
    J_1IEWT_CERT_F01
program :
       J_1IEWT_CERT
But i getting error like report/program statement missing.
plz give me solution
Edited by: vasanth kandula on Jan 4, 2008 1:25 PM

Hi,
open the documentation of that note in Tcode "SNOTE", go through the documentation, there they will propse the piece of code to delete and piece of code to add, check wheather it has been done corectly in your includes and program.
while applying notes first it will checks for the context block where it has to delete the code and where it has to include the new code, some times due to manual changes there may be a chance of code misplace.
go through the documentation clearly, it will guide you.
Reward if useful.
Thanks,
Sreeram.

ABAP dump in ECC 6.0 - Need OSS notes

ABAP dump is coming when retriving data between select-endselect.
Runtime Errors DBIF_RSQL_INVALID_CURSOR
Except. CX_SY_OPEN_SQL_DB
The problem cannot be resolved without correcting the application
program.
The statements MESSAGE, COMMIT WORK, ROLLBACK WORK, CALL SCREEN,
BREAK-POINT, WAIT, CALL FUNCTION ... DESTINATION, CALL FUNCTION ...
STARTING NEW TASK, RECEIVE RESULTS, CALL SELECTION-SCREEN, CALL
DIALOG, CALL TRANSACTION cannot be used within a database
loop.
You can collect the data needed for these statements together in an
internal table and process them
in a loop.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_INVALID_CURSOR" "CX_SY_OPEN_SQL_DB"
Can you please give the OSS notes no. if anything is available.

Hi Sreedevi..
In the dump report, the piece of code where the dump occured will be shown
something with >>>>>> sign in the line...
Please copy and paste this peice of code..
Thanks and Best Regards,
Vikas Bittera.
**Reward if useful**

OSS note 506603 What is it And where can I get it?

Hello,
I am trying to create my form with a SAP Table wizard connection, when I try to use the Table wizard I got the error: "No such interface supported". I can see in a lot of comments the solution is on OSS note 506603. I was trying to find this patch in the sdn site but I could not find it. I am not sure if it is a document, an exe file, a dll,,, and when I see the same question asking where to get the OSS note 506603 there is no answer, could somebody help me telling me what is this and where can I get the patch? I would really appreciate it.
Many thanks.

Hi Eden,
How are you doing ?
OSS note is the older nomenclature for what is now SAP Notes.
They are available at :
http://service.sap.com/notes
you will need a service marketplace user id to log on.
alternatively, if you do not have access to service.marketplace.
send me an email [view my business card], i will reply with the patch. it is a few hundred kb.
with respect,
amit
the note number 506603 :-
Summary
Symptom
Additional information for SAP.Net Connector that was not included in the guide.
Other terms
SAP .NET Connector, Proxy Wizard
Solution
SAP.NET Connector Version 1.0 has been available since Nov 21, 2002. You can download the software from http://service.sap.com/connectors.
Version 2.0 is also available. Use only the new version for new developments.
Report any problems with the SAP.NET Connector under the components:
BC-MID-CON-DNW for problems with the .NET Proxy Wizard for Visual Studio.NET.
BC-MID-CON-DNC for problems with Communication Runtime.
Known problems
1. The Proxy Wizard terminates with the error message "Exception caught in method createFunction for DD_GET_UCLEN Reason: null".
This is caused by a missing function module, which can be installed as described in Note 580834.
2. Corrections for SAP.NET Connector 1.0
The updated version corrects various problems that have been noted during the interim period. You can download it from http://service.sap.com/connectors. To install this version, see the "Release Notes" file. For SAP.NET Connect 1.x, the newest patch-version is called "1.0.3".
3. Corrections for SAP.NET Connector 2.0
For Visual Studio Integration (Design Time) following problems have occurred:
For proxies with several functions, the following runtime error can occur under certain circumstances: "Method xyz can not be reflected." The cause is a combination of an error in the .NET framework and the way in which the proxy generator uses XML-attributes.
The SAP wizard table does not work. Existing tables are not recognized.
Both problems are solved by the patch attached to this note. Stop all instances of Visual Studio and unpack the ZIP file into the "%Program Files%\Microsoft Visual Studio .NET 2003/Common7/IDE" directory, whereby the "SAP.Connector.Design.DLL" file is replaced.
Header Data
Release Status: Released for Customer
Released on: 10.12.2004 16:40:26
Priority: Recommendations/additional info
Category: Installation information
Primary Component: BC-OP-NET-NCO SAP .Net Connector
Secondary Components: BC-OP-NET-VS Visual Studio .Net Connector Wizard
Message was edited by:
amit chawathe

Details of OSS Note in SAP tables

Hi Experts,
Do we have any standard report or a simple way by which I can get all the contents of a specific OSS note without going into SNOTE transaction. The reason why I am asking is for analysing a large volume of OSS notes. If I need to go through SNOTE and then find the objects it will be tedious. I know the table where in these details are there but I want to know if there is any report handy to use.
Kindly help
Regards,
Vijay V

Hello,
I'm afraid, but there is no such report in SAP using which you'll get the content os any SAP note.
Another option than SNOTE transaction is to use SAP marketpplace to findout the same.
Regards,
Nitin

How to create a Attribute "Type standard table OF" to a OSS NOTE

Dear experts,
I need to add new attributes in a standard class as per one OSS note. I took access key to add new attributes. I have a question.
class name: CL_J_1BEFD
Attribute: MT_GROUP_C350
Level: Instance
Visibility: Private
Type STANDARD TABLE OF mty_result
How do i add the instance attribute because i do not want to give the typing and associated type, instead i have to declare data: MT_GROUP_C350 type standard table of mty_result in class builder private section code.
if you look at the pushbutton between Associated type and Description, for all instance attributes there's a green color lining below the arrow. I want my attribute also to be exactly same.
Though i have access key, in private section the display<->Change button is disabled.
Please suggest me how do i add code in private section of a standard class. i have required access key to change the class.
Thanks,
Alysson

Hi Friend...
Thanks, but the question is...
When I went to transaction se24 or se80, I chose the class CL_J_1BEFD and second I swap to "CHANGE MODE".. after that the pushbutton is blocked... I can create the Attribute mt_group_c800 in the Class (using TYPE or LIKE option), but i can't change the code in the private session even using the assistant to modify it.
When I acess the Button "Detail View" the option "Direct Type Entry" is just unavaliable too, no matter what i do!
I coudn't find a way to create the Attibute like the note Describes (SAPNOTE NUMBER 1575772 - in the attachment of the note)
The changes are contained in the attachment
Follows the instructions retrieved from the file:
Add the following Attributes on the Class CL_J_1BEFD Private section
data:
mt_group_c800 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c850 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c860 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c890 TYPE STANDARD TABLE OF mty_result .
How can i make a way to creat this attributes using "TYPE STANDARD TABLE OF " Option?

OSS Note for MIGO "Update terminate (SAPSQL_ARRAY_INSERT_DUPREC)"

Dear all
I am facing problem during MIGO GR reference Others, MVT 561.
Upon clicing Button: Save, I face 2 types of errors intermittently
1. Material document is saved and generated but when comes to displayed, it will say "Document 4900496xxx does not exist in calendar year 2009" And I check in Table: MKPF and it does not exist at all
2. I am not able to save it and face this termination error:
The ABAP/4 Open SQL array insert results in duplicate database record
What happened?
Error in ABAP application program.
The current ABAP program "SAPLGLIU" had to be terminated because one
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and adminis
termination messages, especially those beyond their normal deletion"
I have done my investigation and the number range uder FBN1 for this MVT 561 under this Company Code and Year has been maintained.
Can anyone advise me the OSS note to solve it? I cannot find a direct OSS note on it to solve this.
Thanks.
Edited by: Daimos on Oct 26, 2009 7:58 AM

Sorry Jurgen
I have posted so many material documents using MIGO to test it out and try to update my OMBT there so many times until I lost track what is the current number range when I wrote my question here.
I have read that thread you posted regarding the ST22 analysis [Solution from Jurgen|Document does not exist after creation of PO; . I exported them to HTML and did a detail checking, and I find out it is FI GL there did not update the number range properly which in turns cause my GR to have problems.
Below is my analysis and learning to share with others:
1. Ask the ABAPER to find out which record value the system trying to insert. Copy down this number.
2. Check the OMBT value of Current Number.
3. Then use the MFPK Table to search the latest Number Range.
4. Try to check if the record value trying to insert already exists in Current Number. Normally, it will exist and that is why
    system prompt "insert duplication".
5. Then check if the record value trying to insert already exists in MFPK Number. Normally, it will exists it will exist and that is
    why system prompt "insert duplication". (There can be situation that the Current Number is lower than the MFPK Number,
    but it rarely happen).
6. Replace the Current Number to be the Next Number of MKPF largest Number. Save and it should work.
7. If it is not work, please create a material which is non valuated and perform GR, if GR can be done and we can display
    material doc, it means the error is caused by the FI GL number range error.
8. There can be other issues such as activation of user exits and other.
Jurgen, I got one more question to ask you. I have tried to replace the current number with the largest number of MKPF without + 1. It can solve my problem.
But I wonder why SAP Notes and you suggest us to replace Current Number with largest MKPF value PLUS 1?
Please advise.
Thanks.
Edited by: Daimos on Nov 2, 2009 8:41 AM

Problem while implementing OSS note 1077403

Hi,
I am trying to implement a OSS note ( 1077403) using SNOTE transaction. When I download the note, the status of this note is u201CCan be implementedu201D. It creates few standard programs which are utility programs related to Unicode conversion. While implementing this note, I am facing the issue "Objects can only be created in SAP package" and some of the objects in the note are not created. The note status becomes u2018Incompletely Implementedu2019.
Can you please suggest what could be the issue?

HI,
For more efficence direct link to note Note 1077403 - Cluster table check using SDBI_CLUSTER_CHECK
Have you a basis release version >= 6.20 ?
you can use transaction SNOTE to implement the version for Basis Release 6.20 and higher.
Rgds
Edited by: stéphane mouraux on Mar 1, 2010 6:31 PM

Close the Programs that are opened by OSS Note

Hi,
We had opened some of the standard programs (With access key) and made the modifications as per the OSS note some time back, the programs that were modified are still open for editing even now and the client is concerned about the sanctity of the standard programs as they are open for everyone any one can make changes to the programs, how one can make sure that the object once opened should be closed immediately afer applying modifications, does SAP has any kind of mechanism using which we can track this,
Any help would be highly appreciated,
Rgds,

Hi Sailatha,
Once you have modified an SAP Object using an access key it becomes a custom Object. It can be modified at any time by any developer in the development system. If you have used the Modification Assistant or SNOTE while making the changes the first time, you will be prompted to retain your changes or reset to original in SPAU during upgrades / support packs.
Regards
Suresh Datti

Use of OSS note

Similar Messages

Maybe you are looking for