Use of other dimension filter in business rule

Hi,
I have a requirement to create two eliminations and adjustment business rules, one of which should only run for a specific category and the other should run for all other categories. I thought I could use the other dimension filter for this and on the first rule CATEGORY=ACTUAL is accepted by the system. However, on the second rule I entered CATEGORY<>ACTUAL and when I save the rule I get an error saying that CATEGORY<>ACTUAL is not a valid logical expression.
As we have a number of categories I really do not want to create a rule for each one, so does anyone know a way to create a rule for all but one of my categories?
Thanks,
Arnold

Hi Vadim,
we currently have around 20 categories (plus ACTUAL) and we get two new every year for multi year plan/forecast. If only = works I would have to create one very long string for the second rule and add to it very year.
I will try it though and if you are correct I might have to open a note with SAP.
Thanks,
Arnold

Similar Messages

Eliminations and adjustments rule: Other Dimension Filter

Hi guys,
Anyone knows if it is possible to include a specific property value of a USer defined Dimension as the criteria in "Other Dimension Filter"?
Instead of Product=Prod1 using something like Product.Family=Type1
Thanks

Hi Vadim:
This is Weiwei from SAP Support. I just tested in BPC 10 SP12 that the validation will not be passed when you put something like PROFIT_CENTER.PCTR_TYPE=OP in additional dimension filter. You can only put dimension member in the filter such as PROFIT_CENTER=XXX.
I also test and verified in IFRS Startup Kit and can not find a rule that has the filter configured based on property in the business rule. If you see a different story, please let me know.
A rule is saved does not mean the rule is valid, that is why when you save a rule it will give you warning that it does match the validation. It is not a problem of the product, just as you save dimension without processing/validating it, does not mean the formula/value you put in the dimension sheet is valid.
Hope that helps. Feel free to let me know if you have any thoughts.
Thanks,
Weiwei

Can I pass the selected member at page dimension to form business rule?

I have a business rule which will be executed when the form get loaded, the business rule is very complex, so I want to narrow down the calculation by passing the selected member at page dimension to the business rule.
For example, I have year as page dimension, and I only want to calculate the selected year at one time? How can I do it?
I know runtime prompt, but I don't think it's a good way, since you need to select again.
Thanks
Tony

You can use a variable and a run time prompt.
You can set the business rule options in planning to "Use Members on Form" and "Hide Run time prompt"
This way the page/pov member will be passed into the business and into the variable.
Cheers
John
http://john-goodwin.blogspot.com/

Using third party jars with Oracle Business Rules

Hi
I am working on Oracle AS 10g release 2.
We are using Oracle Business Rules in integration with Oracle BPEL.
While using third party jars however, Oracle Business Rules end is facing errors.
Error during unmarshallingProvider com.sun.xml.bind.ContextFactory_1_0_1 not found
oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: com.sun.xml.bind.ContextFactory_1_0_1
Dependent class: javax.xml.bind.ContextFinder
Loader: oracle.xml:10.1.0_2
Code-Source: /D:/oracleasr3/lib/xml.jar
Configuration: <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\oracleasr3\j2ee\home\oc4j.jar
Can anybody help in figuring out where Jaxb jars(3rd party jars) are to be kept so that OAS access it?
We tried using the applib folder to load the jars but we are getting class loading errors.
When new instances are created, class loading is not happening.
Pls help.
Thanks
Kavya

Are you using Application Server Release 3 or Release 2? There are different versions listed in your mail.
I think you probably want to add this as a shared library via EM and then import the shared library to your application with the application's xml config files.

Using a local Array in a Business Rule

Newbie question here...
I am writing a business rule that applies a standard rate to a lot of different lines in a business rule. This rate only varies by year, so from a logical perspective I think of it as a 1 dimensional variable. However the rate is actually stored in my normal Essbase cube (8-dimensions) something like the following:
Dimension Dimension Member
Account: Rate
Dim2: No Dim2 Value (A dimension member called "No dim2 Value")
Dim3: No Dim 3 Value
Dim4: No Dim4 Value
Dim5: No Dim5 Value
Dim6: No Dim6 Value
Dim7: No Dim7 Value
Year: [varies by year]
So right now my formula to calculate things looks something like the following:
"Target Account 1" = "Driver Account 1" * Rate ->
"No Dim2 Value" ->
"No Dim3 Value" ->
"No Dim3 Value" ->
"No Dim5 Value" ->
"No Dim6 Value" ->
"No Dim7 Value"
But I have to do this for several "Target" and "Driver" Accounts in the rule, which means an ugly looking rule. What I would like to do is create a local array at the beginning of my business rule and populate it with the rate:
ARRAY _rate[Year]
and then set the value of the array equal to
Rate -> "No Dim2 Value" -> "No Dim3 Value" -> "No Dim3 Value" ->
"No Dim5 Value" -> "No Dim6 Value" -> "No Dim7 Value"
This will allow me to simplify my formula down to
"Target Account 1" = "Driver Account 1" * _rate
My first question is "can I do this?" I've been able to create an array and use it in the formula, but I can't figure out how to populate the values in the array from my main Essbase cube.
The second question is "does it make sense to do this?" In addition to making the code easier to read, my guess is that populating the array once and just using it within the scope of the rule would be a bit more efficient than referencing that big cross dim expression, but I really don't know.
Any advice anyone has would be appreciated.
Thanks
-Glenn

I am familiar with what you are trying to accomplish.
Having Essbase store a fixed rate over time to be used in calculations is possible. However formulas start to look complex depending on how many dimensions you have and what the desired outcome is.
There are alternate techniques to the one you mentioned.
You can create a new database for rates only and make it with fewer dimensions. Then use the @XREF function to retrieve it in your formulas.
If the rate doesn't change very often you can put the Rate inside of the formula as is.
For example Y2006_Rate = 5%.
Brian Chow

Using Y-T-D values in Business Rules

Hi All,
I am using Hyperion Planning 11.1.1.1.0.
I have enabled Y-T-D dynamic time series in the application.
I need to calculate YTD variance% , the formula to be used is :
(Y-T-D(Oct)Budget - Y-T-D(Oct) Actual) / Y-T-D(Oct)Budget * 100.
I have a business rule(created in EAS) that does the other variance % calculations which are pretty simple like Budget-Actual/Budget*100.
The formuls for the normal variance Percentage works but i get an error when writing a formula for :
"Variance%(YTDActual&YTDBudget)"
("Variance%(YTDActual&YTDBudget)"="Y-T-D(&CurrentMonth)"->Budget - "Y-T-D(&CurrentMonth)"->Actual / "Y-T-D(&CurrentMonth)"->Budget *100;)
The error that comes up is as follows:
Detail:Cannot calculate. Analytic Server Error(1200497): Error compiling formula for [Variance%(YTDActual&YTDBudget)] (line 2): unknown member name ["Y-T-D(&CurrentMonth)"] in function [operator @X]
Can somebody please advice as how to use Y-T-D values in the formulas?
Kind Regards.
Mirka

Here are a couple of tips that may help:
1) You cannot directly reference dynamic-time-series members in a business rule or a member formula. These are "virtual" members. This is a common misconception.
2) Even if you could reference these members in a formula, you couldn't store a value in them anyway, as they are dynamic.
3) It usually doesn't make a lot of sense to calculate variances like these in a business rule. I would recommend making them dynamic, two-pass member formulas (not business rules) in your Scenario dimension. They don't need to be "Two pass" in the typical sense (eg. recalculating a ratio at the quarters), but they need to fire last, so set them as two pass. (otherwise you will end up with order of calculation issues where other calculations fire after the variance and you get incorrect results).
In looking at your requirement, you don't really need a variance that calls out dynamic time series members. Simply create a variance scenario with a formula like @VARPER("Budget", "Actual");. If you have "Y-T-D(Oct)" selected as your time period in your form or spreadsheet, and "Bud vs Act %" (this is your new variance scenario) selected, it will calculate the YTD variance for October, or whatever time period you have selected.
Just to recap:
1) Create a new scenario called "Bud vs Act %". Make it dynamic and two-pass. Give it a formula of @VARPER("Budget", "Actual");
2) Scrap your business rule. Add other variance scenarios as needed.
3) Add your YTD member and your variance scenario to a form, and test.
Hope this helps,
- Jake

Using StartsWith for String Comparision in Business rules

hi,
I need to compare whether a particular string starts with some pre-defined prefixes. These are bound to change from time to time and hence we wanted to use the business rule engine for this. We declared prefixes using "list of values" vocab and
defined the set. Now, I hoped to use the String.StartsWith() method but couldn't understand if it can be used.
As of now, we are creating a method and that will be called with 2 parameters. One the string and other is one of the list of values which we want the string to start with. Is there any better way to do this?
Praveen Behara
MCST : BizTalk Server 2006 R2, 2010

Hi Murugesan,
I need to match a particular series of numbers... say 12xxx,345xxx,567xxx. I am creating a
Series as a list and the valid values would be 12, 345, 567. I intend to keep them as prefixes i.e. they are not regular expressions. So, they won't be 12.*, 345.*, 567.*. The idea is to keep the vocab close to requirement
and away from implementation (typically, for a business user). Now, if I want this setup, how will the implementation with
Match look like?
Technically, your above solution would work.. but my way of implementation / thought process is for a different purpose.
Praveen Behara
MCST : BizTalk Server 2006 R2, 2010

Use of JSR-94 in oracle business rule

I am developing an application using oracle business rules .
I want to create a JSR-94 Rule Execution Set from Rule Sets in a Dictionary
and want to run the application through created rule execution set.
I have taken reference form OracleBusinessRulesUsersGuide.pdf but unable to
run the installed_dir\rules\demo\car demo through the rule execution set.
U can take the reference of car demo
with regards
saleem khan

Hi,
Thnaks for your reply but I've already tried with that and as I've mentioned above, it would return you an integer representing the day of the week;not the day.
Thanks
Edited by: user11930797 on 20 Sep, 2011 8:22 PM

Use of decision table in Oracle Business Rule

hello,
I am using Oracle Business Rule beta version to develop a rule base application.
I want to know that how i can make use of table to make decision on the basis of table data .
thanx
saleem

hello,
I am using Oracle Business Rule beta version to develop a rule base application.
I want to know that how i can make use of table to make decision on the basis of table data .
thanx
saleem

Make dimension values shown reflect other dimension filter values

I have created a cube and uses access this cube in an Excel pivot table. Is it possible to make values shown for one dimension display only the values valid, if I have selected another dimension's value that would limit the values that should
show under the first dimension? I tried linking the dimensions together with a key and that did not appear to do the trick. I also tried using dependsondimension in properties for the other dimension, but that did not work either. Is
there something I am missing that makes the cube only display the values in a dimension that apply when another dimension's value is filtered?

@Naveen - I am linking to the proper measure and am seeing the correct measure values.
@KR Jurgen - I'm not finding a spot to set the scope to NULL. I would, but some people need all the values.
Here's an example. I have company 1 and 2. Company 1 has item A and Company 2 has item B. They both have sales of $1. There is a company dimension and item dimension. When I filter by company 1, I see sales of $1.
The problem is, when I select the list of items from the item dimension, I still see item B. If I put the items in the row, I only see item A. The ideal situation would be to have only item A show when I select the list of items from the item
dimension. Is there some way to accomplish this?
Thank you both for your responses.

Syntax for using AND with a variable in Business Rule Source

I've never fully gotten my head around the AND/OR syntax of calc scripts. What I'd like to do is as follows in some basic pseudo code:
FIX( ("A97" AND [Selected_Entity]) OR ("B76" AND [Selected_Entity]) OR ("C63" AND [Selected_Entity]) ).
I want my webform's business rule to execute on the selected Entity in the form (eg. A97) ONLY if that entity is part of a restricted list of members (in this case, 3 entities out of 200).
Thanks for any advice!

Hi,
I am not sure if I have totally understood what you are trying to achieve so sorry if I have misread it.
But what you could do is set up a variable in the Bus Rule, lets call EntVar.
It is set up as a local variable of type member and dimension Entity with a run time prompt "Enter Entity"
Now in your script it could look something like this....
FIX(&CurrentYr, "Working".......)
"AccMember"(
IF(@ISMBR([EntVar]) AND ([EntVar]=="A97" OR [EntVar]=="B76" OR [EntVar]=="C63") )
AccMember=.......;
ENDIF
ENDFIX
Once you have tested the business rule, you can get your form to pass through the entity into the variable.
Is this what you are trying to do?
Cheers
John
http://john-goodwin.blogspot.com/

Is it possible to use "not" logical operator in a Business Rule Condition?

This seems like a very simple request to me, but I cannot see any other questions/answers about it.
Can I add a "not" to my Conditions in a Business Rule?
My scenario is that I have a core Entity with a Type. The Type is a domain attribute with a Code and Name. The Code of the core Entity should in the form 'AA-9999', where 'AA' is the Code from Type.
The idea is that I have a business rule with the condition "not
Code starts with DBA.Type.Code" and the Action would be "Code is not valid".
Is this possible? Is there a better way of implementing this?
Thanks,
Michael

Yeah! This is the board in question! But it has lots of versions, like K7T Pro, K7T Pro2 (my one!), K7T Turbo, K7T Turbo Limited Edition and K7T Turbo2, all of then are WS-6330 Lite... They phisically diferent, but the BIOS seens to be the same... I want to know is this feature in the newer version is going to work or not on my board (MS 6330 Lite K7T Pro2 Ver:1) ....
Doesn´t matter what board you choose (PRO, PRO2, Turbo, Turbo2) the MSI page shows all the same BIOS to Download... But I think that this feature is only applicable for K7T Turbo2, but will make no difference in my! At least that´s what I think...
But you´re right! The board that I have is the one on the link you said!
Thanks!

Using variables in Calc scripts and Business Rules

I am sure there have been previous discussions about this, but can somebody let me know the benefits of using variables in Calc scripts and BRs?
Thanks,
A

I have never used calc variables and after reading a study guide, which talked about them, I couldn't really understand the benefits.^^^I use variables all the time to make abstract difficult formulas. Below is an example.
/*     Declare variables     */
VAR varSalaryCosts ;
VAR varProdOHLabXXXX ;
VAR varXXXX ;
A whole bunch of code here along with very limited FIX statement and then...
"Salaried Labor"
     varSalaryCosts = "Salary Costs"->"No Department"->"No Category"->"Salaried" -
                         "Wage Bonus"->"No Department"->"No Category"->"Salaried" -
                         "YYYY Retention Bonus 40%"->"No Department"->"No Category"->"Salaried" -
                         "YYYY 60% Ret Bonus Accrual"->"No Department"->"No Category"->"Salaried" ;
     varProdOHLabXXXX = "Number of Employees"->"ZZZZDepartments"->"Codes"->"Salaried" +
                         "Number of Employees"->"Blah Departments"->"Codes"->"Salaried" +
                         "Number of Employees"->"Humph Departments"->"Codes"->"Salaried" +
                         "Number of Employees"->"TTTT"->"Codes"->"Salaried" ;
     "Salaried Labor" = varSalaryCosts * ("Number of Employees"->"Salaried" / varProdOHLabXXXX) ;
)The last formula is how the formula was described to me by the business owner. I find it to be much easier to read than something like:
"Salaried Labor" = ("Salary Costs"->"No Department"->"No Category"->"Salaried" -
                         "Wage Bonus"->"No Department"->"No Category"->"Salaried" -
                         "YYYY Retention Bonus 40%"->"No Department"->"No Category"->"Salaried" -
                         "YYYY 60% Ret Bonus Accrual"->"No Department"->"No Category"->"Salaried") *
                         ("Number of Employees"->"Salaried" /
                         ("Number of Employees"->"ZZZZDepartments"->"Codes"->"Salaried" +
                         "Number of Employees"->"Blah Departments"->"Codes"->"Salaried" +
                         "Number of Employees"->"Humph Departments"->"Codes"->"Salaried" +
                         "Number of Employees"->"TTTT"->"Codes"->"Salaried")) ;I have used ARRAY in a really-cool-but-alas-not-invented-by-me calc script to do currency conversion in Planning better than Planning does currency conversion. (How's that for a run-on sentence?) It is one of the six blog posts I am working on and I will finish it soon, I hope. I am sort of in thrash mode right now. It does have its uses and I'll try to remember to update this thread when I'm done.
Regards,
Cameron Lackpour

Get cell value in Planning Data form and using it in a business rule

Hi Everybody,
if i set the data type of an Account Member as text, is there a way to get the value inserted by the user in a dataform, turning it as dimensional member and using it in a business rule?
So, if the user insert the value "USA" in a cell, can i use any functions to tell essbase that "USA" is a dimensional member and then using it in a business rule, for example in a cross-dimension like Period1->FY12->USA?
I tried to use the function @Member and it doesn't work, but i'm wondering if there is a way that can let me get the value inserted and use it just like a dimensional member. What are the ways that can let user input value that can be used in a business rule? I think one is by using SmartList, is there any other ways? Maybe using variables?? As an alternative i tried to use Prompt Variable but there are too many members on which the rule must run.
Please help me, i wanna know if i can or not let the user input the member on which the rule must run...
Thank all guys
Bye
Maurizio

Thanks EW for your answer,
YesI could use SmartList even if i think it's very tough to handle. My experience on using SmartList in caclc script is not so good. I try to enter in details of my requirement:
I have 500 account members.
For each one, I have to calculate the monthly budget by sharing the amount among the months. The user wants to calculate it on the basis of the actual flow(over the months) of an unspecified account of the prior year. The unspecified account must be inserted in a data form.
So, i could use a Smart List but it colud be of 500 elements and then i should make a rule with as many IF as how many are the accounts. Or im wrong? The only way to use smart list dynamically in a business rule is by referring its values in a IF condition. Or i'm wrong.
I tried to use execution variable ma it seems don't work. In this case the user must pay attention to write the account correctly, otherwise as you say the rule doesn't work.
The value in PD0A020 is "PD0A000" (that is a dimensional member). The value in PD0A000 is "hello". In PD0A040 the rule returns "PD0A000" and not "hello" as i would. The function @Member appears to be not able to catch the dimensional member by the value in PD0A000.
{Example}="test"->"Input"->"Scenario_test"->"FY12"->"PD0A020";
Fix("test1","Input","Scenario_test","FY12")
"PD0A040"=@Member({Example});
endfix
So, my doubt is: is it possible for Essbase/Planning to use the value inserted in a data form and to turn it in a dimensional member? What are the practicable ways to let the user input/choose the member on which makes the rule run?
Thank you Ew, thank you guys
Maurizio

Track changes in business rule made using SOA composer

Hi,
I have business rules deployed on a server. Authorized user can change condition or any other thing in a business rule using soa composer. How can i track changes made in this business rule?
i.e. I want to view the change and if possible who changes it.
I am using SOA 11g
Any help is appreciated
Thanks

Below document describes how to Monitor Decision Service Components and Engines.
http://docs.oracle.com/cd/E29597_01/admin.1111/e10226/rules_mon.htm#CJAJJIJB

Use of other dimension filter in business rule

Similar Messages

Maybe you are looking for