Use of pack200 utility

Hello,
first of all I apologize for my english.
I use an applet under Internet Information Services and I would like to use pack200 utility to reduce the dimension of my jars.
I use eclipse and I have a jar for my applet, and distinct jars for each library.
When I try to reduce only the jar of my applet all works fine: I use a file with extension jar.pack.gz for my applet and only simple jar for the libraries.
The problem is that I am not able to use pack200 utility on my libraries, after the trasformation, using jar.pack.gz files also for the libraries my browser (Internet explorer) doesn't find the relative classes.
I don't know if the problem is in the way I call the pack200 utility or I declare the applet call.
Is there anyone that can help me?

CarloOne wrote:
Hello,
first of all I apologize for my english.
I use an applet under Internet Information Services and I would like to use pack200 utility to reduce the dimension of my jars.
Is there anyone that can help me?Summarizing the problem.
You have something like the following
- MainApplet.jar, Sub1.jar, Sub2.jar
- You pack them
- You place the into IIS
- You set up IIS to support this
- You send an appropriate request from a client.
It seems to be set up correctly because it works if you use only the single jar.
If that is an accurate summary then then it isn't a java failure but rather an environment failure.
Most likely sources are IIS (setup or where your pack files are) or in the client request.
As a suggestion you might want to use a proxy http/sniffer to see what requests go between IIS and your client.

Similar Messages

How do I use the km utility to get a working Swedish keyboard at inst?

Hi,
This is my initial post on this forum. I'm interested in archlinux as I find "the arch way" appealing, however I'm faced by a little problem first thing during the setup. It wasn't easy choosing between newbie corner and the installation forum, after consideration I picked the latter.
I want to install archlinux on my Acer Aspire 1642ZWLMi, which has a swedish keyboard layout. I want to be able to use the swedish characters åäö during and after the installation phase.
The installation CD suggests that I should run the km utility and pick my keyboard layout and a corresponding console font. How do I find information on which ones to choose?
I have tried some of the layouts with the prefix se- (there are four) but I don't know which console font that has the necessary characters. Even if I managed to pick the correct layout I might very well have chosen an incompatible console font to go with it.
Thanks for reading my post. I would greatly appreciate any help I can get!

Thanks for trying to help me. Though I had already tried the suggested combination of keyboard layout and console font using the km utility.
When I run the km utility first thing during install and choose 'se-lat6.map.gz' as keymap and 'lat9w-16.psfu.gz' as console font it still doesn't work. When I type åäöÅÄÖ on my keyboard åæøÅÆØ is displayed in the console. My search results are telling me that æ and ø are the danish (and some other languages) equivalent to ä and ö.
It is also worth giving emphasis to the fact that the km utility just lets me choose keyboard layout and console font. Which means I'm unable to set any consolemap.
If it's not possible to get swedish characters to work during the installation process I guess installating archlinux first and configuring the keyboard, console font and console mapping later is an option.
How did people from outside the US/UK perform their install? And more specifically in my case, people from Sweden?
All suggestions are welcome! I'm quite eager to try out archlinux.
Last edited by tnek (2008-06-11 21:25:35)

I used the migrator utility to transfer music and picture from my old PC and now I have 2 accounts on my new Mac, how can I get back to one account and still have the music and photos transfered ?

I used the migrator utility to transfer itunes and photos from my old PC to my new Mac and ended up with 2 accounts on my new computer. How do I transfer the music and photos and only have the 1 account on the new Mac ?

That's not easy. The Windows migration tool makes a new user account, and you can't prevent it.
You may be able to transfer what you want manually, but it's not quick or easy. See Transferring files from one User Account to another.

Error in using Outline Load Utility

HI
i am trying to export the members (metadata) of one of my dimension into csv file by using the outlineload utility of hyperion planning. The version of hyperion is 11.1.2.2
instead of creating a csv file the outline load utility throws me following exception:
"Unable to obtain dimension information and/or perform a data load: Registry: Planning product not found."
I also check the log and exception file created by the Outline Load utility which contains the following information;
log file contents
==========
[Wed Nov 21 12:13:04 PKT 2012]Command line arguments: -f:pwd.txt /A:hec_heis /U:admin /-M /E:MetaData/qs_rank_acc.csv /D:Account /L:MetaData/outlineLoad.log /X:MetaData/outlineLoad.exc
[Wed Nov 21 12:13:07 PKT 2012]Unable to obtain dimension information and/or perform a data load: Registry: Planning product not found.
[Wed Nov 21 12:13:07 PKT 2012]Examine the Essbase log files for status if Essbase data was loaded.
[Wed Nov 21 12:13:07 PKT 2012]Planning Outline data store load process finished with exceptions: not all input records were read due to errors (or an empty input file). 0 data records were read, 0 data records were processed, 0 were successfully loaded, 0 were rejected.
exception file contents
===============
[Wed Nov 21 12:13:07 PKT 2012]Unable to obtain dimension information and/or perform a data load: Registry: Planning product not found.
[Wed Nov 21 12:13:07 PKT 2012]Planning Outline data store load process finished with exceptions: not all input records were read due to errors (or an empty input file). 0 data records were read, 0 data records were processed, 0 were successfully loaded, 0 were rejected.
this command was working fine till yesterday. for the sake of testing i try to export the metadata of another application deployed on the same sever and got the same error for that; so it shows that some thing went wrong with the whole server instead of individual application

HI,
Some additional information.
When you see this error message "Planning Product not found". Please check the logs in
C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services, check in HyS9EPMServer-sysout.
You should be able to see the error message as " Received exception while creating connection for pool "EPMSystemRegistry": ORA-28001 the password has expired".
This is an easy way of identifying the case.
Sandeep Reddy Enti

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

IPod shuffle 2nd gen not recognized in Mac either Finder or iTunes (but is detected and works perfectly fine on Windows)... i tried using iPod Reset Utility, but no luck...

i've been working on this for the past few days, and still no luck... iPod Shuffle 2nd generation (i know it's old).... not detected in my home MacBook... but works perfectly fine on Windows....
i tried using iPod Reset Utility, soooo many times... and i only had twice the luck of having it formatted... but even though it is formatted, it still isn't recognized in iTunes or even in Finder.... other than the 2 times of having it formatted using iPod Reset Utility, i had seen all the reuslts, like: Error ressetting the ipod blah blah: iPod has been reset, keep plugged in, until reset is completed blah blah: iPod has been reset, unplug and replug your iPod blah blah... etc, i have seen all the possible effects of iPod Reset Utility, but still no luck getting it recognized in iTunes or Finder....
and then , i tried connecting it to a windows computer (but i didn't restore it from there, and just ejected it from windows iTunes), after ejecting it from windows, and then connecting it to Mac, it worked miraculuosly.... perfectly synced and able to put music and listen to them... ejected iPod... after a few minutes, i wanted to add some other music, but when i connected it again, Bam!!!! not working again... even after connecting to windows, it didn't work anymore... guess the magic trick has been doomed...
i badly need help... puhlease... (^_^)

Hey, I hear ya and can sympathize. I have the same
issue. The difference is that my computer can "see"
my ipod but it refuses to show up in itunes itself;
therefore, I can't put anything on the ipod (from the
computer) and vice-versa. Apple support is clueless.
This is very frustrating to say the least. Itunes
keeps telling me that my ipod is synced to a
"different" computer, which isn't true. It's the
same computer. The difference is that when I first
got the 'pod and used it with this computer (and
everything worked fine), I was running XP. I
installed Vista and after that, all the problems
started. If I ever get this resolved, believe me,
I'll post something here.
I'm guessing that somehow, itunes "sees" what
computer it's hooked to by "looking" at something in
the OS. Change the OS and it "thinks" it's seeing a
"different" computer.
Try reformatting it.

I have noticed that when using Tigers Dosk utility to ERASE a flash drive I have a choice of FAT but not FAT32. It seems that flash drives formatted as FAT do not work properly when trying to copy files from a Windows machine. Why?

I have noticed that when using Tigers disk utility to format an external USB flash drive I only have the choice of FAT ( when formatting for use on a Windows machine ) and not FAT32. I have found that USB FLASH drives formatted as FAT do not always work on Windows machines. Why? How can I use Tiger to format for FAT32?

I think it depends on the size of the Flash Drive as to whether it uses FAT16 or FAT32.
Can you format it FAT32 on the PC?
Other options would be NTFS or Mac OS Extended...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930
MacDrive for the PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/

Help needed in using the DocCheck utility

Hi
Can somebody help me to use the DocCheck utility.I need to check that all the java files have the required javadoc tags and they are correct.
I have downloaded the zip file and I have been giving the following commands
c:\javadoc -doclet com.sun.tools.doclets.doccheck.DocCheck -docletpath c:\svk\jdk1.2.2\bin\doccheck1.2b1\lib\doccheck.jar -sourcepath<full path with the file name>
But I get the following error message : No package or class specified.
I also tried giving the following command:
D:\SegaSource\sega\src\com\sega\account>javadoc -doclet com.sun.tools.doclets.do
ccheck.DocCheck -docletpath d:\jdk1.3\doccheck1.2b1\lib\doccheck.jar User.java
But I get the following message:
Loading source file User.java...
Constructing Javadoc information...
javadoc: warning - Import not found: com.sega.account.address.Address - ignoring
javadoc: warning - Import not found: com.sega.account.icon.Icon - ignoring!
javadoc: warning - Import not found: com.sega.common.DateUtil - ignoring!
javadoc: warning - Import not found: atg.nucleus.GenericService - ignoring!
javadoc: warning - Cannot find class com.sega.account.icon.Icon
javadoc: warning - Cannot find class com.sega.account.address.Address
javadoc: warning - Cannot find class com.sega.account.MasterManager
7 warnings
please help
Thanks
SVK

I have never ran the DocCheck from the command prompt, so I really don't know how to do it, but I do run it succesfully using ant (build tool from apache - jakarta, if you use tomcat you already have it installed).
So.. if you do use ant.. this will help:
<target name="doccheck" depends="prepare">
     <javadoc
          packagenames="${packages}"
                destdir="${doccheck.home}"
          doclet="com.sun.tools.doclets.doccheck.DocCheck"
          docletpath="${doccheck.path}" >
          <classpath refid="project.classpath"/>
          <sourcepath refid="project.classpath"/>
     </javadoc>
</target>If you don't use it.. I guess I was of no help, sorry.
Ylan

I am trying to upgrade my hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far, just before cloning may start and receive an "error 254" and can go no further. Any idea what this error is?

I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far throughj the process where its about to start cloing when I get a message " error 254". Any idea what that means and how do I get around this issue so I can use my new hard drive? Thanks for your input.
Vince

Connect the HDD to your MBP. Open Disk Utility>Erase and drag the HDD icon inrt the Name field. The format should be Mac OS Extended (Journaled). Click on the Erase button.
Then try the clone process again. You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
Ciao.

Unable to start Admin server by using weblogic.admin utility

Hi,
I stoped the admin server by using weblogic.admin utility command as bellow.
java weblogic.Admin -url http://server1:8008 -username adminuser -password weblogic SHUTDOWN myserver
It stopped successfully. But while starting as below i am getting error. Kindly help me out.
java weblogic.Admin -url http://172.27.72.70:8008 -username adminuser -password weblogic START myserver
<Warning> <Net> <BEA-000905> <Could not open connection with host: server1 and port: 8008.>
Failed to connect to http://172.27.72.70:8008: Destination unreachable; nested exception is:
java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: 'star', port: '8008'; No available router to destination
Any suggestion is appreciated.
Thanks,

Hi,
Thanks for your reply.
Yes, Node Manager has configured on Managed Server's host machine.
So can't we start admin server by using weblogic.admin utility if admin server is stopped?
Thanks,

I am trying to get my Canon MP190 to print with Macbook, OS10.5.8. I used to use the printers utility file to check ink levels. Now am told must go to Apple for latest drivers, etc. Where do I go??I am lost.

DesertCatVicki
I am trying to get my Canon MP190 to print with Macbook, OS10.5.8. I used to use the printers utility file to check ink levels. Now am told must go to Apple for latest drivers, etc. Where do I go??I am lost.

Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

Generating multi-level XML in Oracle 8i using XML-SQL utility

Oracle 8i has a limitation when it comes to the object types. Only one-level nesting of collection is allowed. Oracle 9i apparently removes this limitation.
I am trying to generate XML for a hierarchical (conceptually) structure. To do that I am using XML-SQL utility (XSU) running agains an object view build on top of the relational data. The problem is the limit to onelevels of colelction nesting. Oracle 8i gives you a way to create a view with more levels of nesting by using references (REF). The problem is that when XSU runs agains a view with the references, it inserts the references into the XML document (instead of dereferencing them).
Is there a way to generate XML with Oracle 8i with more than two levels of collection nesting?
Thank you.
Michael

Oracle 8i has a limitation when it comes to the object types. Only one-level nesting of collection is allowed. Oracle 9i apparently removes this limitation.
I am trying to generate XML for a hierarchical (conceptually) structure. To do that I am using XML-SQL utility (XSU) running agains an object view build on top of the relational data. The problem is the limit to onelevels of colelction nesting. Oracle 8i gives you a way to create a view with more levels of nesting by using references (REF). The problem is that when XSU runs agains a view with the references, it inserts the references into the XML document (instead of dereferencing them).
Is there a way to generate XML with Oracle 8i with more than two levels of collection nesting?
Thank you.
Michael

Load Data from SQL Server to Oracle 10g using Sql*loader utility

I am trying to lod data from sql server 2005 to oracle 10g.
What is the best way to do it?
Can sql*loader utility do it?
what is the difference of using sql*loader utility and migration tool fom sql developer ?
Thanks
Edited by: user11313758 on Sep 30, 2009 4:30 PM

Hello:
You could consider using Oracle Heterogeneous Services to do this. If your Oracle database is on a Windows platform the link below shows you how to make a connection to SqlServer from an Oracle database.
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
Varad

Importing outline using the load utility

Hi all,
I have extracted my outline using the EPMA file generator and the file is a csv file. I'm trying to load it using the load utility and I'm getting this error
"Unable to obtain dimension information and or perform a data load: Unrecognized column header values"
First row in the excell sheet: !Hierarchies=Account
Second Row: Parent, Child, Data storage......
Do I need to change this header...?

Which utility are you trying to load it with? If it is EPMA then you should look at using the EPMA batch client - http://download.oracle.com/docs/cd/E12825_01/epm.111/epma_batch_user/launch.html
Cheers
John
http://john-goodwin.blogspot.com/

Using the MoveUser utility in IMS 5.2 hotfix 1.21

We are in need to move users from one store server to another.
I am tryng to use the MoveUser utility but IMAP keeps coming back with the following error
%Encryption or a stronger authentication mechanism required
%Encryption or a stronger authentication mechanism required
%Encryption or a stronger authentication mechanism required
Server responded [Too many authentication failures]
I'm running this as the privileged mail user
and have the following imap service information on both servers
service.imap.allowanonymouslogin = no
service.imap.banner = "%h %p service (%P %V)"
service.imap.createtimestamp = 20031121172923Z
service.imap.enable = yes
service.imap.enablesslport = no
service.imap.idletimeout = 30
service.imap.maxsessions = 4000
service.imap.maxthreads = 250
service.imap.modifytimestamp = 20040322150528Z
service.imap.numprocesses = 1
service.imap.objectclass = nsmsgCfgImap
service.imap.plaintextmincipher = 0
service.imap.port = 143
service.imap.sslcachesize = 0
service.imap.sslport = 993
service.imap.sslusessl = no
Anyone familiar with the MoveUser utility?
Thanks

MoveUser gains access to the user's mailboxes by use of the PROXYAUTH mechanism. You have to supply a "store admin" user for proxyauth, and the password for that.
By default, the store admin's name is "admin", but it could be anything. Check your configutil output for "store.admins", and use the user found there.
Test proxyauth by telnetting directly to the imap port, and giving commands like this:
telnet server 143
a login proxyauthuser proxyauthpassword
(server should respond with something including OK)
b proxyauth some_user
(server should respond with something including OK)
c select inbox
(server should give you a listing of what's in the user's inbox. If you fail at any step, you are not correctly set up for proxyauth, and need to check all the steps).
d logout

Use of pack200 utility

Similar Messages

Maybe you are looking for