Use of proportion units or product units was deactivated - CT04

While creating characteristic for PR & PO release strategy, I am able to save it, But while retrieving i am getting the meesage that "CHARACTERISTICS" not saved and getting message "Use of proportion units or product units was deactivatedu201D while drilling down the message.
How to solve this?

Hi,
Please refer below links..
Message LB163 when creating characteristic for release strategy
Kuber

Similar Messages

How to avail product warranty if the unit was bought from other country?

how to avail product warranty if the unit was bought from other country?

You can't and iPhone warranty is NOT international - iPhone warranty is country specific so if you have warranty issues, then you will need to go back to the country of original purchase - nothing more to do. This is exactly why it is not a good idea to buy iPhones abroad - you should buy an iPhone in the country that you live in and want to use the phone in and then you will not have warranty problems.

Warehouse task not being created : Handling unit was not locked

Hi,
I am trying to create a warehouse task w.r.t to an o/b delivery in EWM. While doing so when I try and create the Warehouse task from the Warehouse Req an error comes up : Warehouse Task cannot be created. Handling unit was not locked.
What is the resolution for this? is there some way we can lock the individual handling units?
Arup

Hi,
I am not using HUM at the warehouse level. The storage type used is 0010 (High Rack Storage) and it is defined to behave as a standard storage type.
Arup

In my case, my unit was still under the manufacturer's wa...

In my case, my unit was still under the manufacturer's warranty, so I contact Linksys and they quickly sent a new power supply. Unfortunately, the unit STILL did not work, so I'm now faced with having to go through the process once more and tell them that the unit itself must have died, and could they please ship a replacement.

Kernel Capricorn wrote:
I plugged in my guitar using a standard audio cable and a stereo adapter[...] However, GB was still receiving input from the mic
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
(Let the page FULLY load. The link to your answer is at the top of your screen)

HT2589 We have purchase 5 apple minis and would like them all on one account. That way we can monitor the use of these units. they will be used strickly for a business application. can I use one account in itunes or must i have multiple.

We have purchased 5 apple minis and would like them all on one account, that way we can monitor the use of these units. They will be used strickly for a business application. Can I use one account in itunes or must i have multiple.

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Controlling area already used for org. unit problem

Hi people,
can you please help me with one problem, my customer is upgrading SAP HR from 4.6 to 6.0 and now we are testing QAS system.
When I create new or. unit in PPOME, I have Cost-centre inherited from the org.unit above, but when I want to put another Cost-centre it gives me the next error "Controlling area HR01 already used for organizational unit XXXXXXXX".
The same procedure worksin PRD system which is on version 4. 6. Could you please help me what is wrong because i am not able to change cost centre in the QAS system.
Thank you.
Romano
Edited by: Romano Cinotti on Oct 13, 2009 11:25 AM

Hi,
To which object u are going to change the cost center i.e, position, job, org.unit.
If you are changing the cost center to position, If it is not allowing to change the cost center then u have to check the parameters:
May be u already assigned cost center
May be u already assigned cost center to ur org, unit, which u assigned to ur position. If u already assigned diffrent cost center to ur org.unit, you may not change the cost center to ur position or job.
Regards
Devi.

Handling unit was not blocked - action cancelled VL02N

Dear All,
While pack VL02N data upload by bapi HU_PACKING_AND_UNPACKING its showing error
Handling unit was not blocked - action cancelled
Mohamed

Refer OSS Note 370195 , 331715

How to re-use of handling unit number (SSCC)?

Dear,
We are implementing handling unit management to our customer and HU number is SSCC code. The inbound process intended to use is as follows:
1. Create purchase order with confirmation control key 0004 (shipping notification) and receiving storage location is a HU-managed storage location.
2. Create inbound delivery against the purchaser order via VL31N.
3. Pack HU in the inbound delivery and then post goods receipt.
Further, our customer is using fix SSCC on each pallet physically, so we will maintain external HU number range in SAP accordingly, but the issue is, how to re-use of the SSCC in the inbound process? Currently, once the HU (SSCC) is received in SAP, the system status will be PHEX and WHSE, then next time when the pallet is empty physically, we still cannot re-use of the HU (SSCC) in the inbound delivery for GR process in SAP.
Can anyone of you give me some suggestions how to re-use of handling unit (SSCC) in SAP?
Thanks in advance.
Br,
Jason

Hi Jason
As far as I know it cannot be done in any standard way. The only way is to reset the status of the HU using program ie make changes at Table level VEKP-HU_STATUS.
or during the final issue of the SSCC from the system looks for BADI/Exit to achieve the same or do it through batch program to reset the status
Regards
Jayaram

Use of service units

Hi,
I have a problem trying to understand when to use a Service Unit.
If i need to design for the following flow of control.
1. Client invokes service A
2.A responds to request
3.Client invokes service B, based on the response from A.
Assuming that services A and B are http-soap based web services,
do i need to delpoy service A and B using a service unit on to a http Binding Component ?
Or
Do i need to create two instances of the http Binding component for ServiceA and Service B and configure them to invoke the web services.?
Thanks in advance
vamsi

For a static service dependency situation, such as you describe, external service providers must be configured in the appropriate binding component, so that it a) knows about the provider, and b) can make the service available within the JBI environment. Those configuration data are held in a service unit, deployed to the binding component.
You'll only need one bindiing component; you'll probably create two separate service units for the binding component.

How to not use one organization unit without using tranfer org plan?

Dear all,
I want to stop using one organization unit but I don't want to reset Org Plan (Current-> Pass) so please help me how to reset valid date for one organization unit ?
Thanks for your supports.
Huyen Nguyen

Hi Huyen,
You will have to delimit the Org Unit to a New End Date...to disallow using of this Org Unit...
To do so, Run the TCode RE_RHGRENZ4
Enter the following values in the Report:
Plan Version - 01
Object Type - O
Object ID - XXXXXXXX
Reporting Period - All
New End Date - 31.12.2009
Infotype Selection - Leave it blank as it will delimit all the Infotypes that were maintained for this Org Unit...and will delimit to the new date..
Existing End Date - 31.12.9999
Checkmark the following:
Delete records with start date after delimit date
Lock Object
Display Delimited Objects
Good Luck !!!
Kumarpal Jain.

When i try to open logic x i get a message sayingLogic Pro X unexpectedly quit while trying to use the Audio Unit "Kontakt 4" by "Native Instruments". This plug-in may require an update. how can i fix that?

when i try to open logic x i get a message sayingLogic Pro X unexpectedly quit while trying to use the Audio Unit “Kontakt 4” by “Native Instruments”. This plug-in may require an update. how can i fix that?

Update the plugin or delete it.
Kontakt 4 is a 32 bit plugin, it won't run in Logic Pro X
You need Kontakt 5

Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting?

Error 'Handling unit was not blocked - action cancelled' for Packing

Hi Friends
I am trying to execute Functional Module HU_PACKING_AND_UNPACKING to Pack Sales Order Line Items in to HU.
But System is throwing unusual error Handling unit was not blocked - action cancelled
The Other SAP SDN thread advised to implement OSS Note 370195 , 331715.
The Input Code given in the Note 370195 SAP Developer can not find in our system.
SAP Note 331715 already implemented in our system.
Please help to resolve the issue for Packing Sales Order Line Items in to HU.
Thanks
SR

Refer OSS Note 370195 , 331715

My mother buy one ipod for me,and now she give to me. Can i replace an ipod for an iphone locked to use only of United States? I'm from Brazil and i go to United States(Orlando) in November to live there some time.can i change the ipod to iphone so you c

My mother buy one ipod for me,and now she give to me.
Can i replace an ipod for an iphone locked to use only of United States?
I'm from Brazil and i go to United States(Orlando) in November to live there some time.can i change the ipod to iphone so you can use in the United States.

No.
There are no trade ins at all.
You would ahve to buy a new iphone if you want one.

Is is safe to use a TENS unit while working on my iMac?

I use a TENS unit for back pain. Since it discharges electrical currents, I'm wondering if it's safe to use it while I'm on the computer. Thanks.

I have little or no knowledge on this subject but I see no one else is answering so...
Have you considered one of the downloadable VNC apps, such as "Chicken of the VNC"? There are others also.

Use of proportion units or product units was deactivated - CT04

Similar Messages

Maybe you are looking for