Use of provider contracts is not active

When i create an invoice via the TA FPE1, after filled all the require datas , there would raise an error message Use of provider contracts is not active.
Do anyone knows what's wrong with it?
Thanks

Hi Keith,
Welcome to the SCN forums!
SAPLSKEY
You should first check your Abap dumps using tranaction code ST22, this usually provides more detail on the problem.
In this case I think it's trying to return a screen (or pop-up message) that can't be handled while activating the web service. The "SAPLSKEY" tells me that it might be licence related, do you have a valid developer's licence for Abap development work? If not apply for one (find out the procedure from other Abap developer's that you may work with) & check if that makes a difference while activating.
Regards, Trevor

Similar Messages

Data plan used if MiFi connected but not actively being used?

If computer is on overnight but not in use, meaning MiFi connected, with that use up my data plan? Or does it use up with "active" use only? I'm sharing internet with other people so I'm not sure my data plan is being used on purpose or just getting eaten up while we are all asleep? I'm already maxed with 3 weeks to go!!!

As long as you have devices connected to the MiFi there is always a risk that those devices will consume data behind the scenes without your knowledge. This is how network connected devices work, they are constantly "in use" while connected. Computers, smart phones and any kind of internet connected devices are constantly backing up content, looking for updates and talking to other network devices. It has nothing to do with your active participation and all internet communication is held against you on your data plan.
The only way to completely stop data usage is to turn off your MiFi when it is not needed. This is a common safe practice that you should start using when on a metered data plan. MiFis are not intended to be left on 24x7 anyways, frequent reboots will help ensure the device stays in proper working order and increase the longevity of its life.
Verizon does provide everyone with a data log. The data log will provide you with time stamps and the amounts that are consumed at those times. It should be easy to see when your biggest spikes of consumption are. Isolate what devices are online during those times and what may have been going on and you can start to build a picture of where the problem lies.
To truly see the network traffic in terms of specific applications, web services or devices you need to find and install network monitors. Network monitors come in a variety of applications so you need to find and build a monitoring system that fits your environment. Considering you have other people connected to your MiFi it would not be uncommon for each of you to install a separate monitor specific to those machines.
Let me know if you have any other questions.

Do webpages sitting on safari use data when safari is not active?

So if you have www.apple.com and www.iphone.com both open on safari for the Iphone4, if I hit the home button and go else where, never to open safari again, will those webpages still be using datatransfer from my data plan?

Hi,
After system copy, if the post processing acivities were not performed properly, few of the objects will get deactivated either in your quality or production system. Check these things and contact your basis whether they have taken care all the post processing activities of the system copy.
There could be several reasons like SID determination if the settings for Reporting are enabled.
Also check the job activation of DSO in SM37.
Regards,
KK.

Using iPhone as an iPod (not activated)

I am planning on selling my iPhone to a friend that doesn't have att. I am selling my iphone to get the new 3g iPhone. since my friend doesn't have att he was going to use it as an ipod after i remove my sim card. I'm wondering if he will be able to use it fully on iTunes.

He should be able to use it as a Touch but he will not be able to download updates.

Need to know why contracts(Service contracts) are not showing up in ra_interface_lines-all

Hi all,
We are running the service contracts main billing to get the contracts to ra_interface_lines_all table which are eligible for invoicing, but somehow some contracts are not showing up in ra_interface_lines_all table,
the reasons may be as follows:
1. Billing service flag set to no
2. Contract modifier > 30
3. Contract is not active or
4. Invoice interface is not set to current date.
These may be the reason for contracts not showing up in interface_lines_all, I need to write a query to state why these contracts are not coming into interface table using the above stated reasons. Can anyone help me out saying how can i write query for it?
Thanks,
Aparanjit

Hey Emilio,
I found a solution, that worked for me. Try reseting the sync services as stated in this document:
http://support.apple.com/kb/ts1627
Follow these steps:
Export your Calendar data - (you should end up with a .icbu-File) and make sure all Calendars are shown (I had one that was hidden - which later had all entries doubled)
Close Calendar
Export your Contacts (you should end up with a .abbu-File)
Close Contacts
Backup your iPhone
Close iTunes (just in case)
Open up Terminal and for Mounain Lion enter: /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsyn c.pl full
Open iTunes and sync your iPhone (go to the info-tab you should see blanks and not your Calendars - don't worry they will soon show up, as you activate the sync)
Pooh. Ok. Looks like a lot, but it actually is really simple. I only did so many steps, to really make sure, I would not loose any data.
In quick words: reset your sync services with the terminal and sync again.
I will also write that down for all times in my notebook.
Cheers

My daughter wants to remove herself from our plan and use a different cell provider. However, our contract is not yet up, what is the penalty for removing her early?

My daughter wants to remove herself from our plan and use a different cell provider. However, our contract is not yet up, what is the penalty for removing her early?

For contacts started before November 14, 2014, the ETF is $350 minus $10 per month of the contract term completed for smartphones. For other ddv6,it is $175 minus $5 per month of the contract term completed. You will need to call customer service at 1-800-922-0204 or *611 to find out the ETF amount for contracts started on and after November 14, 2014.

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

On my iPad I have a working icloud that I have complete access to, but on my iPhone it keeps asking me for the password for it, but I do not know it! And the email that I used is not activated anymore! How do I delete the icloud account on my phone?

On my iPad I have a working icloud that I have complete access to, but on my iPhone it keeps asking me for the password for it, but I do not know it! And the email that I used is not activated anymore! How do I delete the icloud account on my phone?

Hi Aurion23,
If you intend to keep using iCloud on your iPad, your best course of action would be to update your Apple ID/iCloud information so that you have a known password and it is associated with an active email address. You may find the following articles helpful:
iCloud: Change your iCloud password
http://support.apple.com/kb/ph2617
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Regards,
- Brenden

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid of this.

Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

Contract number not appearing in PO while converting PR into PO using ME21N

Hi SAP MM Experts,
We are having scenario as Demand PO  SOPRHub PO. We are creating demand PO for company code 1700 by setting massage type ZYT1 in that because of which SO got created through Idoc. In that SO, PR is updated. This is the Hub PR which is created automatically for hub plant 4511 & company code 4500. In this PR, on source of supply tab contract & vendor are appearing as required. When I am converting this PR in PO using ME21N the contract number is not fetching into PO though it is there in PR. This is the issue.
I know the source list (ME03) having multiple sources & contracts so that I need to follow 2 steps as:
1) We need to fix the vendor in source list
2) In change mode of PR we need to assign source manually by clicking on u2018Assign source of supplyu2019 button.
But avoiding these two steps, how can it possible to fetch contract number into PO from PR.
Any pointers in this case will be great help for me.
Thanks in advance.
Regards,
Sachin Patil

does the item in your contract have a different item category or accounting category than in your PR/PO?

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my query

You need to activate Photoshop.
Mylenium

Bridge will not now let me use camera raw, though I had been using it every day. It says that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Bridge will not now let me use camera raw, though I have been using it every day. It ways that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
How To Get Help Quickly

HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

How to automatically complete an SD Contract when not all quantity is used

Hi,
I have a situation where it often happens that not all the quantity in an SD Quantity Contract is used in Sales Orders. When this happens, currently the business users have to go into the Contract, and amend the quantity in order to complete it. I am looking for a way to configure SAP so that these Contracts will automatically move to Complete Status when a certain percentage of the quantity has been used.
I have tried Completion Rules B and C on a new Item Category (copied from KMN). When I select B the Contract is marked as complete after the first Sales Order is raised, regardless of the quantity. When I select C the Contract does not mark as complete. both times I set up a Contract for 100KG, then Ordered 98KG. I tried amending the under-delivery tolerances on the Customer Master and it had no effect.
I have searched the SD Forums, looked on SAP Support Marketplace, and tried Google - but I can't find anything that describes my situation. Can someone out there advise?
Thanks,
Val

Hi,
I don't think this can be achieved in SAP std.
You have to go for custom development in ABAP . You can achieve this through userexit MV45AFZZ. The code will be executed when saving the subsequent sales document i.e. Sales order. Once the said percentage is achieved this code will set the status of contract as referenced.
Hope this will help you.
Thanks and regards
Atul

Use of provider contracts is not active

Similar Messages

Maybe you are looking for