Use of scenario progression in THM80

Hi,
Can you advise the steps that need to be taken to use scenario progression with THM80 please? We have setup regression analysis calculation type and obtain results when running THM80. We now wish to use Scenarios with this regression calculation type.
We have used TV21 to define some scenarios and TV28 to setup a scenario progression. Also used JBR0 to setup market data shifts. The system will use the scenario we have setup in TV21. Hwoever we cannot get it to use the Shift.
Does THM80 support the use of Shifts? Can you provide some background info on how shifts are intended to be used with THM80, what is the purpose of using Shifts?
Thanks
Mik

Hi
If you have engaged in the exports sales process then you have to fill up the foreign trade customs data in billing header as well as item.
You may need to r=enter the details like
country of origin
mode of transport border
mode of transport domestic
customs of office
region of origin
commodity code
and some more fields
regards

Similar Messages

  • File to RFC with multiple records using BPM Scenario Error...!!!

    Hello Guru's,
      I have done the File to RFC with multiple records using BPM scenario as per the Materiel available in the sdn.sap. This involves BAPI (BAPI_MATERIEL_AVAILABILITY). I have done exactly the same what is their in the materiel. SXI_CACHE is also giving return value " 0 ". File is getting deleted from the source directory, but no file in target directory. SXMB_MONI is also showing no error (black Flag). BPM is also error free. Checked the interfaces also.
    Can any one tell me what mistake would i have done.
    Thanks in advance.

    Hi,
    There is one similar discussion I found,
    FTP TO RFC using BPM
    Thanks
    Swarup

  • Configuration Scenario for BPM Using Integration Scenario

    hi All,
    I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
    Hoe to Create Integration Scenario for BPM Scenario
    Integration Scenario in BPM  and few more.
    My IS looks like
    Sender App Component - Integration Process - Receiver App Component
    Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
    And when i click "Configurability Check" Button, i am getting below as status:
    Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
    Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
    getABSPayload and sendABSPayload are actions for Abstract interfaces.
    IS_POC_BPM is the Integration Process Name.
    Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
    Please help me in identifying if i am doing any thing wrong in creating this scenario.
    Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
    Thanks,
    Mayank
    Edited by: Mayank  Gupta on Apr 21, 2010 6:35 AM

    I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
    Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
    may be after looking the Integration scenarios you will get more idea
    Regards,
    Abhishek.

  • External requirement handling in SRM using classic scenario

    Hi Experts,
    We have a requirement in Classic scenario:
    PRs for MRO / indirect materials generated in PM / PS of ERP will be transferred to SRM using WF interface for approval process.
    Upon final approval in SRM, Follow-on document PO should be created in the back end.
    The SC in SRM should have the status u201CApprovedu201D & u2018Follow-on Documentu2019 created.
    My question is SRM standard will create a PO as follow-on doc after the SC is approved in SRM. How to control this creation of PO in SRM & only approval message should be transferred to back end ERP.
    Pls provide any suggestions or inputs on technical settings / adjustments to be carried out.
    Note that we cannot use PDP scenario as SRM will be used only for SC approval process.
    Tks.

    Thanks Muthu for the reply.
    The doc flow in the link above shows that after SC is approved, it will be available in sourcing cockpit for further processing (i.e. RFX, PO etc) in SRM. Our requirement should not be allowed to create PO in SRM and it should be allowed only in back end ECC.
    SRM is used to centralize the approval process where multiple back end systems are connected. (How ever, in future follow-on docs are also created in SRM).
    Current Target steps:
    1. Create PR from PM/PS in ECC (PR status will be "In release").
    2. Transfer PR to SRM and SC will be created (SC status will be "In approval").
    3. SC will be Approved / or Rejected in SRM. (PR status will be updated to Approved / or Rejected in ECC).
    4. If approved, follow-on doc PO (manual or automatic) will be created in ECC. (SC status will be updated to EX: "PO cretaed")
    When the SC is in the process of approval, user in ECC may add new items or make changes to PR from PM/PS. After these changes, the current approval WF for SC in SRM should be cancelled and new SC is created and so on...
    Sophisticated message synchronization is required between ECC & SRM.
    Is it possible to acheave the above solution (create PO only in back end system) using the steps mentioned in doc "5082a622-7310-2c10-1a9b-ef31dd69a770.pdf" with some modifications.
    Forgot to mention the following system details:
    ERP - ECC with EhP4 
    SRM - SRM 7.0
    Thanks,

  • Why do we use Integration Scenario in IR

    hi 2 all,
    i wanted to know why do we use Integration Scenarios and how to configure it ,i mean what are the steps for it
    Edited by: ujjwal kumar on Mar 11, 2008 11:19 AM

    Hi,
    The integration Scenario in IR will be useful for re-presenting the whole flow of the interface.
    If you do the itegration scenrio in Design time then you do not need to follow the stpes which is required in configuration like creating Aggrement,determination and all. you just need to import the scenario from integration repository that will avoid configure part.
    Usually during the audit time the auditor checks whether IS is designed or not? as that is the good practive to design ur scenario with IS.
    Companion Guide to Integration scenario
    /people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
    It will be good loaction to get all the information about whole interface.
    You could either create or transport the same Integration scenario in ID.
    With the use of Integration scenario you could model the whole interface with all minute details
    It comes under best practices. So if you create the IS it will be very easy for you to understand the and designe the business flow. Morevere becomes very easy while creating/configuring the Integration Directory, you just need to import the design objects form IR.
    If you will not create IS, there is no harm. So it all depends upon client and also you.
    Thanks
    Swarup
    Edited by: Swarup Sawant on Mar 11, 2008 11:28 AM

  • How do I track doc download progress using jQuery UI progress indicator?

    How do I track document download progress using jQuery UI progress indicator?
    I'm looking at downloading a zip file in response to the onclick event in a jQuery button. I'd like to show the download progress on the page.
    I'm working with users who may not be Web savvy and need to know something is happening. Also, they may be on lower bandwidth connnections, so even a small zip file could take time to download.

    Darn it, another senior moment.
    Here is the link http://www.ultramegatech.com/blog/2010/10/create-an-upload-progress-bar-with-php-and-jquer y/
    Gramps

  • Feature - use case scenario with different scopes

    Can we share few real-time use case scenarios when we can create SharePoint 2010 Feature with following scope levels:-
    1. Farm
    2. Web application
    3. Site collection
    4. Site
    I mean with real-time examples....

    Below are the examples which you can build based on different scopes.
    1. Farm(Farm-scope) - Web templates
    2. Web application (Webapplication-scope) - Timer Jobs
    3. Site collection (site-scope) - Content Types, web templates
    4. Site(web-scope)
    - Lists, Content Types
    You can build a Content Types by
    web scope or site scope, but it makes more sense in making them
    at site scope so that it can reusable. If you see the above examples web templates can be built either at FARM or site scope, you have to decide at which scope you need to develop based on your requirement.
    Check the below elements which can build at various scopes.
    http://msdn.microsoft.com/en-us/library/office/ms474383%28v=office.14%29.aspx
    I would suggest you to go through a list of features and their scopes available in SharePoint 2010 to get an idea when to try to build a new artifact
    https://social.technet.microsoft.com/wiki/contents/articles/7695.sharepoint-2010-list-of-features-id-displayname-and-scopes.aspx
    Hope this helps.
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • Missing components in BI Content, using preconfigured scenario.

    Hello experts,
    I'm trying to install the CO-PA analysis scenario using the preconfigured scenario document.
    At the step "1.4.7     Activating Business Content: InfoObject Catalogs" (0CHANOTASSIGNED) I reached an error message during the objects collection : "InfoObject 0XASUPPLIER is not available in version A".
    If I understand correctly, this infoobject is missing in the BI content ?!?
    (I look here for my error message and can't find it, I hope I don't miss any usefull subjects before posting)
    Thanks in advance for any help.
    Guillaume P.

    Unfortunately, I've already tried that and it doesn't work.
    (I drag and drop both infoobjects in "collected windows", and install but still get the same message concerning missing attributes for both).
    For information I also have  a "To many attributes selected for input help" error, with the following details :
    Characteristic 0XASUPPLIER: To many attributes selected for input help
    Message no. R7B201
    Diagnosis
    You have selected too many fields for the input help display. The search help has a length of 000954 characters at the moment. 995 characters are allowed.
    System Response
    Characteristic 0XASUPPLIER cannot be activated.
    Procedure
    Remove fields from the input help (set the input help sequence on the Attribute tab strip to zero), until the length is again smaller than 995 characters.
    All other needed objects are actively available, only the two problematics are missing.

  • SRM PPS using classic scenario

    Hi SRM Experts,
    I am exploring the possibility of implementing PPS in SRM 7 using the classic scenario.
    Please let me know if it is possible and how can it be achieved.
    Earlier threads mention that PPS is only available using extended classic.
    Thanks.
    Regards,
    Amish

    Hi Amish ,
    PSS scenario is not supported for classic scenario ,
    changes in procurement process of SRM  7.0
            - Stand alone and classic scenario not supported
            - Shopping cart renamed to Purchase Requisition
            - Shopping cart generate (pre)commitment in funds management
            - Contract can create Funds Reservation (Earmarked Funds) in Funds Management as a Guarantee
            - Goods Receipt and Invoice created in ERP
            - Mixed PO: PO with lines that works like contract lines, a PO can be created from these lines
            - PO created from contracts or mixed-PO is named call-off PO. Only is a new name, is a "normal" SRM      PO
            - Goods receipt possible in SRM only in "easy" cases
    Thanks& Regards
    Pradeep Kumar Dondeti

  • Error in PCR approval using JSP scenarios in ERP 2005

    Hi All,
       Due to the missing Adobe PCR scenarios for Request for Transfer, we are having to use the JSP PCRs.  I can create one, and route it to the senior manager for approval, but when they try to launch the form from the workitem, I get the following error:
    "Unable to perform action because the system returned an invalid URL"
    We've debugged the FM that provides the items for the UWL, and looked in lots of portal logs, but can't find what this invalid URL actually is!  Therefore, it's proving virtually impossible to find out what I need to change to correct it!
    In order to change to the JSP PCRs, I've changed the scenario config in QISRSCENARIO to specify "Entry Using JSP iView", I've specified an "Internet Link" (below the Additional Data button) of:
    http://<server>:<port>/irj/servlet/prt/portal/prtroot
    In the additional data, the Portal Component comes through as:
    com.sap.pct.hcm.pcr_specialpayment.default
    and I've defined a "Server" entry for Entry Using JSP iView of:
    http://<server>:<port>/irj/servlet/prt/portal/prtroot
    I've looked at SAP note number 646601.  I've configured SWFVISU to change task TS50...075 from Java WebDynpro to "iView", and specified:
    ID = com.sap.pct.hcm.isrdispatcher.default
    When registering the item types in the portal UWL config, this appears to pull through values as per the xml config file attached to 646601.
    Any ideas?
    I'd very much appreciate any help you can give!
    Many thanks,
    Russell.

    Hi Lewis,
       Yes, I did!  The problem is that the UWL iview launcher requires a fully qualified iview path (ROLES://portal_content/...).
    However, the isrdispatcher iview is a "master iview" from the EP5 days.  This means that it doesn't exist in the PCD as an iview that you can fully qualify!
    It does have a par file, however, so the solution is to create your own isrdispatcher iview, based on this par file.  Then you can enter the fully qualified location of your iview in the ID attribute in SWFVISU:
    ROLES://portal_content/.../my_isr_dispatcher
    Hope this helps!
    R

  • Consignment with 3rd pty and cost control using MTO scenario

    Hi ,
    I have a scenario where my client wants to do a consignment process but alos capture the material cost into WIP. Consignment needs to use own as well as third party materials. Allthe costs need be captured and kept in WIP till customer asks us to bill for the qty used by him.
    Is there any way this can be addressed using SAP std consignment process. We tried using RA Key for doing cost transfer to WIP and used the Make to Order scenario for outbound shipping , however this is not a foolproof process and has its own challenges as to Warehouse managment and consignment pick up and return process.
    Can anyone pl share any thought process?
    Thanks

    HI
    Solved by myself.
    The right transaction to use is CO88 and not KO8G used for CO and PM Orders.
    Claudio

  • Make task befor send mail. Use of "Show Progress" and Exception

    Hello,
    Could I handle Send Event of MailItem in a way that Outlook understand it.
    I want to do a long task before sending the mail. The user musn't be block. I wish Outlook display the task when user click on "Show progress" I have two choise actualy:
    - I cancel upload while my task ending.
    - I make a new thread were i do all the process and finally call the mailItem send method
    The first seems to work pretty well. But it need the user wait to the end of the process before send. As it didn't block the user to write read others mail it could be a solution.
    I prefered the second one who don't change the user experience. But i have many problem to do it :
    - How to apeared in "Show progress"
    - Exception raise when i send a (draft)mailItem show in preview pane.
    Thanks.

    That is how Outlook Object Model works. Prior to Outlook 2013, some things would work on secondary threads, but sometimes they would blow up in a really spectacular fashion. So in Outlook 2013 Microsoft made a decision to raise an exception immediately as
    soon as Outlook detects that one of its objects is used on a thread other than the primary Outlook thread.
    This applies to the COM addins only of course since when your code is running inside the outlook.exe process. If you are out-of-proc, all calls will be marshaled to the main Outlook thread anyway, which negates the whole purpose of using multiple threads
    to begin with.
    Only Extended MAPI (C++ or Delphi) can be safely used on a secondary thread. You can also use the
    RDO family of objects in
    Redemption - it wraps Extended MAPI and can be safely used on a secondary thread from any language. See also
    http://www.dimastr.com/redemption/faq.htm#Threads
    Dmitry Streblechenko (MVP)
    http://www.dimastr.com/redemption
    Redemption - what the Outlook
    Object Model should have been
    Version 5.5 is now available!

  • Some of the functionality has vanished since Dec when I use my class progress page. written in JavaScript.

    On my progress page students must change a default number in a dialog box. The box then asks for the new number.
    The correct number is input but results in an error message.
    This has worked seamlessly for many years with Firefox. IE has serious problems with the progress page so it cannot be saved and updated. I do not want my students to have to use two browsers.

    A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
    *http://forums.mozillazine.org/viewforum.php?f=25
    The helpers at that forum are more knowledgeable about web development issues.<br>
    You need to register at the MozillaZine forum site in order to post at that forum.

  • Using interlaced and progressive formats in FCP

    I am using Sony's HVR-Z1 camera with FCP and wanted to know if I can mix interlaced and progressive captures together. I want to buy the Sony HVR-V1U camera.

    it should be fine, just as you can mix PAL and NTSC, HD and SD etc ... ultimately, of course, it will conform to one or the other as per your sequence settings
    ... and, as you have the camera and you have FCP, why not just try it? post your results so that others may benefit from your findings
    cheers
    Andy

  • Video walkthrough online for Final Cut Pro X when approaching it from a Never Been Used Before scenario?

    Hi there
    I've used iMovie a few times and been quiet successful with it, but I was thinking of getting Final Cut Pro X as I want to do some more advanced video editing now (I really dont know the terms for what I want to be able to do are, but things like be able to stack say 10 different camera angles up on top of each other and decide which part of each one I want to use).
    My problem is that I cant find many videos online (youtube etc) if I were to approach it as if I've never used it before.
    Most of them go on about how things have changed from one version to the next and whats new in this edition.
    I dont want WHATS NEW though, I want WHAT IT CAN DO.
    So some kind of walkthrough (It can be an 90 minutewalk plus through for all I care) that shows off most of the things you can do with it.
    Any suggestions of ACTUAL links?
    Thanks in advance.

    What you described isn't really multi-cam editing.
    I think FCP X is idea for what you want because you can AUDITION as many clips as you want then you simply select this or that angle and play it through in the timeline - it's a fabulous feature in FCP X.
    I strongly recommend you watch some good (PROPER) tutorials on FCP X.
    I've tried a number of FCP X Tutorials and in my experience, Ripple Trainingis clearly the best.
    There is a small fee, but it's more than worth it.
    I just read your follow-up post.
    shippo_uk wrote:
    Does anyone already have the practise media and do they fancy popping it up online to share?
    No they don't - that is STEALING.
    Do you begrudge these people a living?
    (There's a word for people like you).
    Andy

Maybe you are looking for