Use of scheduler

This may seem very basic to some but I have the following questions about scheduling and recording.  Does the PC have to be running to record? When it starts recording, is everything suppose to open? I thought it would run in the background. If it's suppose to open should I just turn the volume all the way down?( I know now not to mute it.) and will this effect the volume in the playback? Is there a manual other than the MSI one? I've been looking over all the past posts and I anticipate I will have more questions as I try to work out each problem as it comes up.

Quote
Originally posted by Boo
I found that if I muted it, there was no audio on the playback.
That's odd.  I mute when I schedule an unattended recording session and the audio is still there when I watch later.  I also may mute and unmute when recording while using the computer for purposes and never noticed a problem.  I'm running Win2000sp2 with the newest version of MSIPVS downloaded from the MSI site and the beta drivers which I located through this message board.
What line are you recording your audio through?  Line-in, aux, mic?  I think I'm using line-in.  You might try a different audio input.
Good luck!

Similar Messages

  • Not able to schedule using KM scheduler

    I've created a new project with KM scheduler wizard and deployed the .par file in the client server machine.
    The code basically creates a text file.
    I scheduled this through portal(System Administration->System Configuration->Knowledge Management->Configuration->Content Management->Global Services->Scheduler Tasks),but file is not getting at the given location in the server at the scheduled time.
    When i tried to deploy the same in one of our local portal server machine then the file is getting created.
    I'm unable to understand this discrepancy.
    What could be the various reasons for the file not getting created.
    It is very urgent,quick response will be appreciated and awarded points
    Thanks and regards,
    Pradeep

    Thanks pradeep, the above problem got solved.
    I have one more issue,
    I want to send mail using KM scheduler.
    I'm able to send mail through standlone java application(i.e through command prompt) but when i deploy the same by creating a par file through webdynpro and schedule it through KM scheduler, the program does not send the mail and i get the following error in the default.trc file
    "javax.mail.MessagingException: Could not connect to SMTP host: <XXXXXXX>, port: 25;
      nested exception is:
         java.net.ConnectException: Connection refused: connect#"
    what could be reason for this discrepancy,eventhough it is the same program that is being executed
    It is really urgent , quick response will be appreciated and points will be awarded.
    Regards,
    Pradeep

  • How to create a standard order with using the Scheduling agreement.

    Hi All,
    Could any body tell me step by step process of creating a standard order using the Scheduling agreement reference.
    Thanks,
    srinivas.

    HI
    In Scheduling Agreements the subsquent process is not order it is actually delivery
    Scheduling Agreements contains Fixed Delivery dates and quantities and the same can be seen in schedule lines of the
    Scheduling Agreement which you have prepared
    The word fixed carries a lot of meaning here
    On the due date
    the system actually creates deliveries or it appears in the delivery due list
    You cant create order referring to scheduling agreement
    This is business logic and SAP logic too
    Scheduling Agreements means your order is sheduled for delivery
    Raja

  • DS Scheduling Error when using BOE scheduler

    Hello
    I am trying to schedule a DS job using BOE scheduler. I get the following error
    Server Input% not found or server may be down
    I am able to connect to the CMS within the admin console successfully. I can setup the schedule for a batch job using the BOE scheduler. When I select the 'activate' button and click 'Apply', I get this error.
    On the CMS side I can see a folder for DataServices created but the folder is empty.
    We are using BOE XI 3.1 FP 1.8 and BODI 12.1.1.2.E2 on Windows
    Can somebody provide some inputs on how to debug this issue  or is this a bug ?
    Thanks
    Dinesh

    Hi Manoj
    Thanks this was the issue causing the error
    Dinesh

  • Error while sending the data using input schedule

    Dear Friends,
    I am unable to send the data using input schedule due to following error is occur while sending the data.
    The Error Message : Member (H1) of dimension (ENTITY) is not a base member (parent or formula)
    Can anyone please help me to resolve the above error.
    Thanks and regards,
    MD.

    Hi,
    You are trying to send data to a parent/node, you can only send data in BPC to lowest-level children (base mamabers) of any dimension.
    "H1" is a parent in the entity dimension so you should try sending to a child.
    Tom.

  • Running a .cmd file at startup using Task Scheduler on Windows 2012 R2 server

    Hello,
    I've recently tried to get a simple .cmd file running at server startup on my Windows 2012 R2 server.
    The .cmd (test.cmd) file contains the following:
    C:
    cd C:\SomeFolder\
    call Some.exe file "Argument1" "Argument2"
    I've ensured that the local administrator user [someuser01] has full control of the C:\SomeFolder
    I've also ensured that someuser01 is part of Log on as Batch Job
    in Local Security Policy
    To try running it as startup, I tried using Task Scheduler.
    General Tab: I set the user (local administrator account [someuser01] ) and ticked the options
    Run whether logged on or not, Do not Store Password, Run with Highest Privileges
    Triggers: At System Startup, Ticked Enabled
    Actions: Start a Program. Program/Script: test.cmd, Add arguments: [Blank], Start in: C:\SomeFolder
    Conditions: Unticked all conditions
    Settings: Ticked only the following --> Allow task to be run on demand, If the running task does not end...force to stop
    Then I clicked OK and was prompted for someuser01's credentials.
    I then restarted the server.
    Upon logging in as administrator, I checked the task scheduler, and I found that the task did not run (Last Run Time: Never)
    I've been able to run it manually (click Run on the task in Task scheduler) without any problems.
    I just cannot get it to run at startup as I've instructed Task Scheduler to do.
    Any ideas on what might be causing this problem?
    Thanks.

    Hello Dave Patrick,
    I've also tried this approach and I came across this error after I try to enter someuser01's credentials:
    An error has occured for the task sometask01. Error message: The following error was reported: A specified logon session does not exist. It may already have been terminated..
    After doing some research, this new error is caused by a setting in Local Security:
    Local Security Policy --> Security Options --> Network Access: Do not allow storage of passwords and credentials for network authentication --> Enabled
    Unfortunately, I cannot disable this Security Policy due to our company's internal restrictions.
    Just to clarify, the reason that the task does not run at startup is because of a logon failure because the password was not stored for
    someuser01 ?
    However, I cannot allow storage of the password because of our our company's internal restrictions.
    Is there a possible workaround for this..?
    Thanks!

  • Using OBIEE Scheduler to export and save data in excel/pdf

    Hi
    Is it possible to use obiee scheduler and run particular reports and export the data into excel/pdf and save this file at given location on server.
    env: obiee 11g/linux OS
    Thanks for any ideas.

    Hi,
    Yes it is possible.
    As per my knowledge we don't have such option but we can do one way.
    Using IBOTS you can store specific report and specific time in specific location.
    Note : Using JS script.
    Are you going to implement this way send me your mails id will send you js script for doing this.
    Re: Auto SAVE to excel -- Please refer this thread.
    Create js file using the below script and add this js scrif in your ibot advanced tab.
    var FSO = new ActiveXObject("Scripting.FileSystemObject");
    var foldername = 'D:\IBOT'
    if (FSO.FolderExists(foldername))
    var fileName = foldername + "\\" +Parameter(1);
    var fooFile = FSO.CopyFile(Parameter(0), fileName, true);
    else
    FSO.CreateFolder(foldername);
    var fileName = foldername + "D:\IBOT" + Parameter(1);
    var fooFile = FSO.CopyFile(Parameter(0), fileName, true);
    Thanks,
    Satya

  • Parallel processing in background using Job scheduling...

    (Note: Please understand my question completely before redirecting me to parallel processing links in sdn. I hve gone through most of them.)
    Hi ABAP Gurus,
    I have read a bit till now about parallel processing. But I have a doubt.
    I am working on data transfer of around 5 million accounting records from lagacy to R/3 using Batch input recording.
    Now if these all records reside in one flat file and if I then process that flat file in my batch input program, I guess it will take days to do it. So my boss suggested
    to use parallel processing in SAP.
    Now, from the SDN threads, it seems that we have to create a Remote enabled function module for it and stuf....
    But I have a different idea. I thought to dividE these 5 million records in 10 flat files instead of just one and then to run the Custom BDC program with 10 instances which will process 10 flat files in background using Job scheduling.
    Can this be also called parallel processing ?
    Please let me know if this sounds wise to you guys...
    Regards,
    Tushar.

    Thanks for your reply...
    So what do you suggest how can I use Parallel procesisng for transferring 5 million records which is present in one flat file using custom BDC.?
    I am posting my custom BDC code for million record transfer as follows (This code is for creation of material master using BDC.)
    report ZMMI_MATERIAL_MASTER_TEST
          no standard page heading line-size 255.
    include bdcrecx1.
    parameters: dataset(132) lower case default
                                 '/tmp/testmatfile.txt'.
       DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
      If it is nessesary to change the data section use the rules:
      1.) Each definition of a field exists of two lines
      2.) The first line shows exactly the comment
          '* data element: ' followed with the data element
          which describes the field.
          If you don't have a data element use the
          comment without a data element name
      3.) The second line shows the fieldname of the
          structure, the fieldname must consist of
          a fieldname and optional the character '_' and
          three numbers and the field length in brackets
      4.) Each field must be type C.
    Generated data section with specific formatting - DO NOT CHANGE  ***
    data: begin of record,
    data element: MATNR
           MATNR_001(018),
    data element: MBRSH
           MBRSH_002(001),
    data element: MTART
           MTART_003(004),
    data element: XFELD
           KZSEL_01_004(001),
    data element: MAKTX
           MAKTX_005(040),
    data element: MEINS
           MEINS_006(003),
    data element: MATKL
           MATKL_007(009),
    data element: BISMT
           BISMT_008(018),
    data element: EXTWG
           EXTWG_009(018),
    data element: SPART
           SPART_010(002),
    data element: PRODH_D
           PRDHA_011(018),
    data element: MTPOS_MARA
           MTPOS_MARA_012(004),
         end of record.
    data: lw_record(200).
    End generated data section ***
    data: begin of t_data occurs 0,
          matnr(18),
          mbrsh(1),
          mtart(4),
          maktx(40),
          meins(3),
          matkl(9),
          bismt(18),
          extwg(18),
          spart(2),
          prdha(18),
          MTPOS_MARA(4),
        end of t_data.
    start-of-selection.
    perform open_dataset using dataset.
    perform open_group.
    do.
    *read dataset dataset into record.
    read dataset dataset into lw_record.
    if sy-subrc eq 0.
    clear t_data.
    split lw_record
       at ','
    into t_data-matnr
          t_data-mbrsh
          t_data-mtart
          t_data-maktx
          t_data-meins
          t_data-matkl
          t_data-bismt
          t_data-extwg
          t_data-spart
          t_data-prdha
          t_data-MTPOS_MARA.
    append t_data.
    else.
    exit.
    endif.
    enddo.
    loop at t_data.
    *if sy-subrc <> 0. exit. endif.
    perform bdc_dynpro      using 'SAPLMGMM' '0060'.
    perform bdc_field       using 'BDC_CURSOR'
                                 'RMMG1-MATNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                 '=AUSW'.
    perform bdc_field       using 'RMMG1-MATNR'
                                 t_data-MATNR.
    perform bdc_field       using 'RMMG1-MBRSH'
                                 t_data-MBRSH.
    perform bdc_field       using 'RMMG1-MTART'
                                 t_data-MTART.
    perform bdc_dynpro      using 'SAPLMGMM' '0070'.
    perform bdc_field       using 'BDC_CURSOR'
                                 'MSICHTAUSW-DYTXT(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                 '=ENTR'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                                 'X'.
    perform bdc_dynpro      using 'SAPLMGMM' '4004'.
    perform bdc_field       using 'BDC_OKCODE'
                                 '/00'.
    perform bdc_field       using 'MAKT-MAKTX'
                                 t_data-MAKTX.
    perform bdc_field       using 'BDC_CURSOR'
                                 'MARA-PRDHA'.
    perform bdc_field       using 'MARA-MEINS'
                                 t_data-MEINS.
    perform bdc_field       using 'MARA-MATKL'
                                 t_data-MATKL.
    perform bdc_field       using 'MARA-BISMT'
                                 t_data-BISMT.
    perform bdc_field       using 'MARA-EXTWG'
                                 t_data-EXTWG.
    perform bdc_field       using 'MARA-SPART'
                                 t_data-SPART.
    perform bdc_field       using 'MARA-PRDHA'
                                 t_data-PRDHA.
    perform bdc_field       using 'MARA-MTPOS_MARA'
                                 t_data-MTPOS_MARA.
    perform bdc_dynpro      using 'SAPLSPO1' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                 '=YES'.
    perform bdc_transaction using 'MM01'.
    endloop.
    *enddo.
    perform close_group.
    perform close_dataset using dataset.

  • What is the use of Schedule Tab in Oracle BI Publisher

    I am learning oracle bi publisher, here in the BI Publisher Enterprise screen , i got 3 tabs , 1) Reports 2) Schedules 3) Admin, here my Schedule tab is disabled..
    What is the use of Schedule Tab ?
    Edited by: joysaha123 on Mar 19, 2010 8:45 PM

    Dont you think, this has to be posted in BI Publisher forum ?
    If you had, this will get more visibility.
    Neway, let me answer.
    The reports can be scheduled for later, which can be monitored(download previously run report/re-run).

  • Cannot delete Package Link due to being "used in schedule"

    Hello all,
    I am trying to delete a Package Link in EPM's Data Manager and am getting the message that:
    "Package link {technical name of package link} is used in schedule"
    Is there a way to find what schedule this Package Link thinks it is a part of? We are not running this Link in a schedule to our knowledge.
    We are running EPM 10.0 SP14 Patch 2 .NET 4
    Thank You.

    Hi Alex,
    You can disable the schedule link from EPM Add-in menu Data Manager->View status->View schedule status-> Then you can right click on the schedule and select delete schedule.
    Best regards,
    Charlie

  • I am a small service company and we use the iphone 4 do you have a program we can use for scheduling one one computer that has all the schedules of our service techs so we can change appointments and track

    I run a small service company and we use the iphone 4, do you have a program we can use for scheduling from one or two computers that allows us to schedule service calls and track our service techs.
    A program we can enter each phone and have there schedule and current location available at all times.

    Search the iTunes App store or find a developer to create an app that meets your needs.

  • Run powershell script against exchange using task schedule

    I want to run this using task scheduler
    Get-MailboxStatistics -Server mailserver  | Select DisplayName, ItemCount, TotalItemSize | Sort-Object TotalItemSize -Descending | Export-CSV "\\pacetoputreport\report_$((Get-Date).ToString('MM-dd-yyyy')).csv"
    I know I have to run some variation of this to launch the exchange module
    C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto"
    How can I do this in Task Scheduler? I have tried numerous times using various combinations, but nothing seems to work.
    Thank you

    You need to put the first part where you call powershell.exe in the Program/script part of the task, but the rest of it is put into the arguments section. As explained here
    http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2013/Powershell/scheduling-exchange-powershell-task.html (which has versions for both 2010 and 2013, but since you list V14 in your filepath I assume you're using 2010) you'd need to
    set the arguments to :
    -version 2.0 -NonInteractive -WindowStyle Hidden -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; <Your Command>"

  • Configuration needed to set up a customer to use a scheduling agreement

    We need to set up a new customer to use a scheduling agreement .  We need to know what is the conifguration needed to do this. Is there config that has to be set up for the customer say in the customer master to allow this. Is there also config that needs to be set up in the plant or shipping point.

    Hi Frank,
    Please go through this.
    Spro --> img --> sales and distribution --> Basic Settings --> Partner Determination --> Set-up Partner Determination --> Set Up Partner Determination for Sales Document Header
    Select "Partner Determination Procedure" as "DS - Scheduling Agreement"
    Once selected, mantain appropriate settings in following (from Left-hand side)
    Partner Determination Procedure Assignment (Sales Doc --> Partner determination Procedure).
    Hope this helps you.
    Kanna.

  • Ejecution of an scenario using the scheduling of a scenar

    Hi Guys,
    I am runing some interfaces using there schedule of an agent. I have two variables that take value like START_DATE='20120401' and END_DATE='20120402' but I need
    that the value assigned to these variables can be set taking the function sysdate how can I do to give the value of these variables using an select or to date function?
    Thanks in advance.

    Hi Kesana,
    My variables are defined as numeric so when I try to change the value in the scheduling I can not enter the select word. How can I defined these variables?
    Thanks in advance.
    Edited by: ORV on Sep 10, 2012 4:33 PM

  • Load master data using input schedules

    Hi all,
    Does there exist a way to load and modify master data using input schedules?
    Regards,
    Nithya

    Hi Nithyapriya,
    Chiming in here to 2nd Joost's statement above.  As of BPC 5.1 version, it is not possible to update master data from an Input schedule.
    Whether that's possible in other products or with BPC 7.0 NW (currently in Ramp-up), is another story.  For now, the general answer is that it's not possible.
    This is a known area for improvement with BPC at this time, and we're sure to hear more about either integration with NetWeaver or some other methods of making things more dynamic, or with SSIS packages, etc.. in the future.
    Edited by: garrett tedeman on Sep 2, 2008 7:20 PM

  • Using Supplier Scheduling along with eCommerce; how does this fit into ASCP

    Hi,
    In Oracle 11i we are using Supplier Scheduling along with eCommerce to publish our MRP forecast via EDI 830/DELFOR. We use autoScheduling which requires MRP and in 11i we run MRP, so it all works well.
    Now we are moving to 12i and using ASCP (Advanced supply chain planning) and I understand that we do not need to run MRP any more. ASCP in conjunction with PS (Production Scheduling) will do the trick.
    Given this situation how can I use Supplier Scheduling / eCommerce to publish EDI 830/DELFOR?
    Appreciate any input in the right direction.
    Thanks!!!

    any body...some body...please help!!!

Maybe you are looking for