Use of SE14 other than adjust

Hi Experts,
Can u tell me the exact use of the transaction SE14 other than the activate and adjust database
thank u all in advance

If you go to transaction SE14, at the top menu select "Help --> Application Help". This will give you the complete overview of the transaction.
- April King

Similar Messages

TS3297 iTunes puts up a message "The item you've requested is not currently available in the Hong Kong Store." I had not requested anything from the HK store at that point, and I have never used any store other than the HK one. How I can clear that messag

I've been running iTunes on WinXP for years with few problems. I have all my iTunes files on an external USB drive. I just bought a new PC running Win7, 64-bit.
I connected the external USB drive to the new PC and installed 64-bit iTunes on it. When iTunes started up, I pointed it at the iTunes directory in the external drive, using Edit > Preferences > Advanced > iTunes Media Folder Location. It showed a progress bar that it was updating the iTunes Library. I signed in and authorized the new machine. I have one spare authorization.
Then iTunes put up a message "The item you've requested is not currently available in the Hong Kong Store." I had not requested anything from the HK store at that point, and I have never used any store other than the HK one.
When I click OK, the iTunes Store page remains blank, apart from saying "iTunes Store" in the middle of the page.
I went to "View My Account" and pressed the Reset button to "Reset all warnings for buying and downloading items", but that doesn’t fix this particular warning. I also tried Edit > Preferences > Advanced > Reset Warnings and Rest Cache.
But still, every time I click the “App Store” button in the iTunes Store window, the message appears. If I click the Books, Podcasts or iTunesU buttons, these display normally. So I’m stuck with being unable to purchase apps, other than through my iPad and iPhone.
If I move the external drive back to the XP machine, the same thing happens. If I go to another PC - a notebook running Vista - everything is normal.
Any idea how I can clear that message?
Thanks for any help you can offer.

Further info on my question above.
I have tried re-validating my credit card, which apparently fixed it for some.
I have also tried uninstalling, re-downloading and installing again.
Neither of these steps fixed the problem.

Are there any other flash players that you can use on Safari other than Adobe

Are there any other flash players that you can use on Safari other than Adobe?

Not as far as I am aware.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS The latest version, 10.2.152.25 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Note that the latest Flash Player update only works on YouTube with Safari in 32 bit mode - until YouTube correct this.

Why do PDF's offset use decimal system other than Hex?

Hi,
I found PDF format's byte offset in xref table using decimal system other than hex ,so I feel it which is really special because many file format use hex offset,e.g. tiff,PE,etc.
so I want to know why PDF format's byte offset choose to use decimal system?
Thanks!

Not a known problem. And the "already launched" problem points to an issue with Reader.
Please submit some samples with a bug report for Reader to debug.
Here is what the issue looks like (click to zoom) :
On the left side is the PDF file opened with no other instances of Adobe Reader open. On the right side is what the exact same file looks like when opened after another instance of Reader (displaying another PDF file) was already open.
It's as if the font rendering engine was incapable of multi-threading. Like Reader can only render the font properly if the PDF file in question is the only one it's got in RAM.
Worth noting :
Opening a 2nd PDF file with distorted fonts does not affect the first open PDF. That one continues to display normally. Only every subsequent instance of Reader will have this issue.
Files were saved normally via Photoshop CS5, although this issue has been present for at least 2-3 versions if not more (only started saving PDF's around that time - it's quite possible this was ALWAYS an issue).
This is strictly a SCREEN RENDERING ISSUE. The PDF file prints to paper just fine with uncorrupted fonts no matter how it looks on-screen.
As mentioned earlier in the thread, this happens across multiple computers. Whether I create the PDF via Photoshop CS3 in WinXP or via Photoshop CS5 in Windows 7 on a completely different computer... it will have the same issues. Tried it at work, too -- miles away from home. Same issues. Graphic cards are also from different makes, and display the same issue.
This happens to every single font in the document, regardless of how common or obscure a font it is. In this case, it's Helvetica Neue.
Again, because this important : even if the fonts look distorted on-screen, they will print out on paper just fine. This is a screen rendering issue.
Default PDF settings, no layers, vector data non-rasterized.
Hope this helps.

What is the main use of domain other than providing technical attributes

frends let me know what is the main use of domain other than providing technical attributes

hi RajaReddy,
Domains are used to
1. specify fixed value ranges.
For eg: status type Char 1, can have fixed values stored in the domain level
as '1' - Active '2' - retired '3' - terminated '4'- temporary..etc

2. Conversion routines are attached at domain level

Conversion routine MATN1 (connected function modules are CONVERSION_EXIT_MATN1_INPUT
CONVERSION_EXIT_MATN1_OUTPUT), is attached for domain MATNR
3. Value table are atttached at domain level (if fixed value ranges are not mentioned)
for eg: value table mara is attached for Domain MATNR.

4. And most importantly, domains can be re-used for multiple data elements, in the same table.
Hope this helps,
Sajan Joseph.

MacBook Pro freezes when using any app other than the web browser.

My MacBook freezes when using any app other than the web browser. I can open up Google Chrome and use it all day with no problem, but if I minimize it and try to browse through photos in my picture folder or do anything that involves the Finder, the computer just freezes up and I get the rainbow wheel. If I put in a CD to play it, the computer freezes with the rainbow wheel. Any suggestions? I would like to use the mac for more things than the internet.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I need to use a drive other than C: to store my bookmarks how do I do this?

I use software called Deep Freeze that restores my C: drive to it's original state every time I reboot. I need to have my bookmarks stored on a drive other than C: else when I reboot any changes I've made will be lost. Is there a way to do this?

You can only do that if you create a new profile and locate that new profile on that other drive.
http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

What happens if i use a software other than itunes to transfer music?

Hello people,
Im new to apple and its softwares, tricks..etc.
So the question is i purchased some stuff from itunes i would like to have in phone and i also have loads of music in my pc that were taken from old cds etc...after my research i noticed there is a itune match or someting that can allow you do that with a 25$/year cost which i agree is not much and i might end up doing it but i don't find it right to NOT HAVE FULL control over my stuff...so is there anyway to be able to transfer these old songs into iphone without using itunes without any risk or problem?

iNoella wrote:
And out of curiousity what would be a good software to use instead of iTunes if i want to use anything other than iTunes?
Nothing.
There are a couple of programs that kinda work...

Smart tunnel used for access other than native application?

Dear all,
i have a question about smart tunnel. my situation is, i need to access to the server on certain IP address that using a port (example : port 5007) that is native for the application. that application is customized application just for my company.
Question is :
1. can i use smart tunnel to access the application for that particular port (ex : port 5007, 8476) ?
2. i have so many grup servers (other than group server A) with so many costumized application with native port . is there any other way for me to access to that IP without using smart tunnel? because this project requirement is
Clientless application access using application/Agent in user's PC, such as RDP, SSH & Native Application and ohers.
Group Server A
IP Port
10.194.24.99
5007, 80, 9593, 9594, 9595
10.194.22.99
82
192.9.1.99
23, 449, 8470, 8476, 9470, 9476, 992
My ASA is 9.1.3 and my ASDM is 7.1.3
Please kindly to help, any reponse i appreciated
source : http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/tunnel.pdf

See http://www.mozilla.org/projects/netlib/PortBanning.html
* http://kb.mozillazine.org/network.security.ports.banned.override

Using still frame other than in iMovie

I have a still frame I grabbed from a movie clip. How do I move it and or save it so that I can use it in other applications, i.e., to send as an attachment with email?

Are you using imovie 08? This advice only applies for iMovie 08
If so, position your cursor at the point in your video that you would like to capture. Then right-click and select add still frame to project. You should see this still frame in your project, probably at the end. (You may want to start a new project so you don't clutter up an existing project.
Now right-click on the still frame in the project. Select revel in finder. This will bring up a finder window with the jpeg file highlighted. That is the one you want.

Why can't you use PipedXputStream in other than threaded application

I have need for usage of these in a non-threaded application, however the Javadoc indicate this should not be done.
"Attempting to use both objects from a single thread is not recommended, as it may deadlock the thread."
As the Java community is composed of some brilliant people, I am curious as to why any limitation of this sort has not been fixed/addressed?
What is the root cause of these deadlock situations?
Thanks in advance.
Steve

899559 wrote:
I have need for usage of these in a non-threaded application, however the Javadoc indicate this should not be done.Because using streams in a single thread makes no sense, since you can just use method calls. And that avoids the situation were you could be trying to write more than the stream buffer can hold or trying to read more than you wrote to the stream.
data = getData();
outPipe.write(data);
data = inPipe.read();
doSomethingWith(data);
// is just a roundabout way of coding
doSomethingWith(getData());

WSUS Repair: Can I not use a drive other than C:?

I used the wizard to move the WSUS folders from the C: drive to the SBS2008's D: drive in order to recover C: drive disk space as so many others have had to do. Now ofcourse, the system says it no longer is installed as designed and updates to domain
computers no longer works.
There is a good TechNet article on how to "Repair Windows Server Update Services" but it assumes the WSUS directory must be created on C: which ofcourse is not what I want.
I appreciate there are SQL issues involved here, but if I simply specify D: as the partition to create the WSUS directory, substitute D:\WSUS in the wsussetup.exe parameters (from the section in that article headed 'To manually recover Windows Server
Update Services), will this work?
Thanks in advance
Jerome

Hi Jerome,
à
if I simply specify D: as the partition to create the WSUS directory, substitute D:\WSUS in the wsussetup.exe parameters (from the section in that article headed 'To manually
recover Windows Server Update Services), will this work?
I suggest that you should follow the step “create a directory called WSUS on the C: partition” to
repair WSUS as described in this TechNet article (Repair Windows Server Update Services). It will help us to avoid unexpected issues.
à
I used the wizard to move the WSUS folders from the C: drive to the SBS2008's D: drive in order to recover C: drive disk space as so many others have had to do.
After repairing WSUS, please refer to following article and check if help you to
move WSUS Content and Database Files to a Different Volume.
How
to Move WSUS Content and Database Files to a Different Volume
Meanwhile, please refer to following article and check if help you to recover disk space on C drive.
Recovering
Disk Space on the C: Drive in Small Business Server 2008
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

A "genius" at an Apple store told me to delete the photos from my documents folder and trash them and I would still be able to keep them in iPhoto. Now I cannot use the photos other than in the iPhoto file. Can this be undone?

How can I retreive deleted iPhotos which were deleted from the documents and trash files? I stupidly did this because a "genius" from Apple Store assured me that I would still have access to the photos.

Check iPhoto's Advanced preference pane to see if it's set to a referenced or managed library;
If it's set to a referenced library you photos are gone.
If that's the case they might be able to be recovered with a file recovery app like SubrosaSoft FileSalvage. It will run in demo mode so you can see if it can recover your photos before having to purchase it. Use the iMac as little as possible till them so as not to overwrite them.
If it's set to a managed library launch iPhoto with the Option+Command keys held down and rebuild the library's databse file.
What verson of iPhoto and system are you running?
OT

Having problems with Verizon iPhone 5 using excessive data. Verizon will not help can anyone give me advice? Have family plan never went over 8gb of data in 6 years, now avg 14 a month and are not using anything different other than having iPhone 5.

Switched to iPhone 5 on July 31st. Since then our data usage has doubled. Verizon will not help find out what the problem could be, they claim they are unaware of a problem. I told them to look on the customer support page and many have complained about the problem. Now on the apple site I see it may be an apple problem. Some one needs to fix this. Apple you want us to use your products, please do t make it cost us more money just to do what we did prior without problems. Prior phones were iPhone 4 and we never had issues and never went over 8 gb's for 4 phones. Now we are doing 14. Can anyone tell me what is going on. Getting ready to stop using cell phones all together.

Well you could Restore it from your backup and see if that helps. If it doesn't Restore it as new and manually add things back until the problem starts again.
I would also suggest trying a different SIM.
Without iOS 7 there is no way to isolate what is using the data.

Error message: Disc Burner is in use by application other than itunes

My burner was working fine a few days ago, yesterday I tried to burn a playlist from itunes and I got the error message in the subject of this post.
I checked to see if my burner was working...according to the system it is working properly. Also, I am able to burn and backup files and photos. For some reason I cannot burn music as a data file or music CD.
Any suggestions? I have a hp PC...how can I tell if my burner is indeed being tied up by another program or if my computer has a virus?

been having the same problem for months.
i can only burn cd's in itunes for a few minutes after rebooting my g5. nothing is physically wrong with my burner and there is NO other application using it as the Itunes error states...
anyone have any insight on this?

Use of SE14 other than adjust

Similar Messages

Maybe you are looking for