Use of see burger adapter replacing with File (FTP) adapter

Hi All,
My current scenario is file to proxy and want to replace file adapter with the see burger adapter.
Can any one expalin step by step procedure(after installation of see burger adapter in SDM) using sender see burger adapter with the port details?
For this do we need to write any adapter modules in integration directory?
Also pls give me clarification on 850 and 997 messages?
Regards,
Nani.

Hi,
Deploy the standard seeburger mapping provided by see burger on XI .Then you need to call that mapping in the adapter module which does the conversion from EDI to XML and XML to EDI. You need to call the BIC module in the communication channel configuration and configure the module parameters like
bic- destSourceMsg = MainDocument
bic- destTargetMsg = MainDocument
bic- mappingName-something like ....See_E2X_ANSIX12_850_V4010
Once if you are able to convert the edifile to xml, then the remaining proxy configuration will be same as just for normal scenarios.
>>For this do we need to write any adapter modules in integration directory
You can use the standard BIC module or you can very well write your own adapter module to convert EDI to xml and configure it in the communication channel.
>>>Also pls give me clarification on 850 and 997 messages
850 is purchaseorder EDI document and 997 is the functional acknowledgement
The links provided by Luis will really help you in understanding the basics. Also go through the below links
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10b17369-9522-2c10-84a6-d75d8a8ace22
Regarding EDI
Seeburger BIC Help!!
Regards,
Priyanka

Similar Messages

Dynamic file naming with File/FTP adapter

Hi all,
I have a requirement for writing files with names of the files based on a customer ID.... a dynamic name based on a value retrieved from the customer DB.
I have already tried using the dynamic file naming suggestion in the bpel dev guide, it does not work. I followed the instructions, the process fails to compile and throws "part" and "undefined variables" errors etc.
Has anyone succesfully used file/ftp adapter to write files with dynamic file names (using a varibale), not %SEQ% or %datetime% formats?
Thanks,
Hasan

You can create a header variable that will allow you to set the outbound file name inside the process. This variable is a message type. From the type chooser select:
Message Types
Partner Links
Outbound Partner Link
Outbound wsdl
Message Types
Imported WSDL
fileAdapterOutboundHeader.wsdl
OutboundHeader_msg
This variable will have a part filename.
Set this part to whatever you wish your file to be named.
Select the invoke to your outbound file/ftp partnerlink. Move to the adapters tab and select the header variable you created as the Input Header Variable.

Urgent: Conversion with File/FTP adapter

Hi Guru.
I've a problem:
I need to read a binary file (like an image) and convert it to a hex format.
How can I do it?
Have you some idea?
Thanks
Manuel

HI Manuel
Configuring the sender FILE adapter 
The sender file adapter is configured to pick the normal payload (file1.xml), which is specified in the File
access parameters, and the additional image file (file1.jpg) that is to be sent as an attachment is configured
under the Additional File(s) as shown in the screenshot below. The file type would still remain binary.
Since, by default, XI sends payload and attachments in XML format, we need to call two beans, namely the 
MessageTransformBean and the PayloadSwapBean to help us is transforming the content to jpeg format
and also change the file extension.
The PayloadSwapBean module is used to replace the application payload of the XI message that holds the
data with another payload which is appended to the message as an attachment. In our case, the payload
would be file1.xml whereas the attachment would be file1.jpg
The swap module is denoted in our scenario with the module key swap. It has two parameters from the
MIME header. They are
if want the step-via step doc mail me at my Primary Id at SDN
Thanks
Questions are welcome here!!
Also mark helpful answers by rewarding points 
Regards
Abhishek Agrahari

"Message Rejection Handler" for the file/ftp adapter using fault policy

Hi guys,
We are trying to implement "Message Rejection Handler" for the file/ftp adapter using following fault policy configuration.
Fault Policy:
`````````````
<?xml version='1.0' encoding='UTF-8'?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="2.0.1" id="ProcessNameGenericPolicy"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-rethrow-fault"/>
</retry>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
<faultPolicy version="2.0.1" id="ProcessNameHumanInterventionPolicy"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults"
name="medns:mediatorFault">
<condition>
<test>contains($fault.mediatorErrorCode, "TYPE_TRANSIENT")</test>
<action ref="ora-retry-with-intervention"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry-with-intervention"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>

</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry-with-intervention">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-human-intervention"/>
</retry>
</Action>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-rethrow-fault"/>
</retry>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
<faultPolicy version="2.0.1" id="RejectedMessages">
<Conditions> 
<faultName xmlns:rjm="http://schemas.oracle.com/sca/rejectedmessages" name="rjm:PartnerLinkName">

<condition>
<action ref="writeToFile"/> 
</condition>
</faultName>
</Conditions>
<Actions> 
<Action id="writeToFile">
<fileAction>
<location>Server/Loc/path</location>
<fileName>Rejected_AJBFile_%ID%_%TIMESTAMP%.xml</fileName>
</fileAction>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
Fault Binding:
``````````````
<?xml version='1.0' encoding='UTF-8'?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<composite faultPolicy="ProcessNameGenericPolicy"/>
<service faultPolicy="RejectedMessages">
<name>PartnerLinkName</name>
</service>
<reference faultPolicy="RejectedMessages">
<name>PartnerLinkName</name>
</reference>
</faultPolicyBindings>
We have SyncFileRead partner link.
The expectation is: when the message read by SyncFileRead partner link is rejected,
that rejected message should come to particular directory in the server.
Could you please help us fixing this.
TIA.

HI..
Have a look at this blog :
3) Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Description: The request requires user authentication
Possible Tips:
u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
u2022 If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
u2022 If the error is in Adapter Engine
u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
u2022 May be wrong password for user XIISUSER
u2022 May be wrong password for user XIAFUSER
u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Http* Errors in XI
Thanks,
Pooja

Using relative path for in file/ftp adapter

Hi All,
How to have a relative path for file/ ftp adapter's inbound/outbound operation?
Example: Consider $ORA_HOME = /home/oracle --> This environment variable can be different on different machines
i want to drop a file in to $ORA_HOME/folder1/folder2 (Or poll for a file).
<partnerLinkBinding name="FTP">
<property name="wsdlLocation">FTP.wsdl</property>
<property name="out_dir" type="LogicalDirectory">What do i write here???</property>
<property name="retryInterval">60</property>
</partnerLinkBinding>
if i cant configure this in partner link section or in activation agent sction, how else do i achieve this?
i am using 10.1.3.* version.
Thanks in advance.
Roshan.

You can achive it using the deployment scripts if the directory is changing on the basis of the environment
If you want to change at run time than you can use the jca properties to set using the variables at runtime.
Regards,
Ajay

Process TIFF file from FTP server using File/FTP adapter

Hi,
I have a requirement to process a scanned document TIFF file from a directory on an FTP server using the File/FTP adapter and process through XI into a Web Service via a receiver SOAP adapter.
My question is can the file/FTP adapter be used to process the TIFF file into XI from an FTP server ? Also, what settings need to be made on the file adapter to allow this file to be processed into XI ?
Thanks in advance
Colin

hi colin,
TIFF is type of image file, it can be converted to binary using java mapping
refer this pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
regards
Ramesh P

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599

In my SOA Composite, Can I use file/FTP adapter to get the EDI X12 850

Our requirement is to build a SOA Composite to dump all the details in a EDI X12 850 ( Purchase order ) document in to a database table. In my SOA Composite, Can I use file/FTP adapter to get the EDI X12 850 element details to map them to a base base columns.

Drop the File Adapter to the left lane of the composite i.e., Services lane...
Go to Step 2, give a meaningful name....
Step 3, select "define from operation and schema"
Step 4, select the operation type as "read"
Step 5, select physical path and give the folder path in the "Directory for incoming files" field.,
Step 6, select wildcards and give the expression depending on the file name it would be at run time...
Step 7, select the polling frequency as required....
Step 8, in the URL field, adjacent to that , select "browse for schema file" and select the XSD which you have exported from B2B Editor.
say next and finish, you will be good to go.
Hope this helps,
Thanks,
N

Using my macbook pro whole day with the power adapter , will it affect my battery? Please help

Using my macbook pro whole day with the power adapter , will it affect my battery? Please help

It doesn't affect the battery. You can use your MacBook Pro plugged in all the time without damaging the battery. You only have to be sure that you unplug it and run a battery cycle (drain the battery without letting the Mac turn off and charge it fully) at least once a month to keep the battery life.
If you want more information about your battery > http://www.apple.com/batteries/notebooks.html

Quality of service in Receiver file/ftp adapter (SAP PI 7.1)?

Hi,
    We are building an IDoc to File scenario in SAP PI 7.1, where a single incoming idoc will create three different output files. Also files must be created in target server in a specific order.
    Our first idea to ensure that files would be created following a specific order was that Message mapping (in Java) build target payload with all three files following expected sequence.
    In addition, receiver file/ftp adapter is setup with a dynamic variable to create each file with a different filename adding also timestamp.
    Testing the scenario, we see that three files are created in target server but when we sort them by creation date, it seems they don't follow always same sequence.
    Sometimes adapter creates File1, File2, File3; next time it created File2, File1, File3 and so on.
    Our problem is that files must be created always with a specific order and we cannot use BPM. Does anyone know if a receiver file/ftp adapter can be setup to create files following specific sequence (EOIO)?
    I know that sender file/ftp adapter can be setup with a quality of service, but I didn't find anything similar for Receiver file/ftp adapter.
    Suggestions will be welcome.
Kind Regards,
Aitor

Hi,
     First, thanks all of you for your quick answers. They were helpful because we learnt a new configuration setting.
     We tried your suggestions but they didn't really fix our problem.
     Finally interface has been re-designed and we will not have to apply this logic, so no issue from our side.
     However, let me continue with this topic in case that somebody else will have the same issue, then it will be able to review this thread.
     When adapter created the files in the target directory (windows server), files had the expected timestamp in each filename. However, if we sorted windows directory contents by "Date Creation", files were sorted different that timestamp shows in the filename.
     For example, adapter created following files:
File1_20090325-115117-169
File2_20090325-115117-174
File3_20090325-115117-180
     But when we sorted windows folder contents, files were sorted as follows:
File2_20090325-115117-174
File1_20090325-115117-169
File3_20090325-115117-180
     It seems that timestamp was pre-assigned by the adapter, but when adapter created the files, it did it with a temporary name and finally assigns the filename. If a file size was bigger than other, maybe it takes more time and windows creation date is higher.
     If so, it means that adapter is not following same instructions as itu2019s indicated in "maintain order at runtime" checkbox.
     Do you know if there is any way where we can push also the order in the adapter as we did in interface determination?
Regards,
Aitor

Sender File/FTP Adapter - Matching Input to Message Type

Hi,
I have a sender file/ftp adapter which is using content conversion to generate an XML document from the contents of a text file. This works fine and when I go into the SXI Monitor I can see the XML document I expect:
<ns:DN_360BalanceExtract xmlns:ns="http://xxx">
<ns:RN_360BalanceExtract xmlns:ns="http://xxx">
<BalanceRecord>
 <SerialNo>xx10000780</SerialNo>
 <RegNo>A1</RegNo>
 <LocationTicketIssued>ALBERT ROAD SOUTH</LocationTicketIssued>
 <DateOfOffence>2008-02-15</DateOfOffence>
 <TimeOfOffence>13:38</TimeOfOffence>
 <OffenceDescription>xxx</OffenceDescription>
 <CurrentStateOfCase>RE-OPENED; CLOSED IN ERROR</CurrentStateOfCase>
 <OutstandingBalance>70.00</OutstandingBalance>
 </BalanceRecord
<BalanceRecord>
 <SerialNo>xx90001245</SerialNo>
 <RegNo>S849KMR</RegNo>
 <LocationTicketIssued>ALBION PLACE</LocationTicketIssued>
 <DateOfOffence>2011-03-01</DateOfOffence>
 <TimeOfOffence>10:59</TimeOfOffence>
 <OffenceDescription>xxx1</OffenceDescription>
 <CurrentStateOfCase>xxx</CurrentStateOfCase>
 <OutstandingBalance>60.00</OutstandingBalance>
</BalanceRecord>
</ns:RN_360BalanceExtract>
</ns:DN_360BalanceExtract>
Having created the XML document from a text file I now wish to use the XML as input to a web service. This will of course involve mapping the XML document to a message in the inbound interface. Question is how do associate the XML generated with a Message Type in the outbound interface. Do I need to make sure the Document or Recordset names match that of a Message Type ?
Cheers,
PaulC.

Hi Paul
The content conversion will create a document like that if you insert DN_360BalanceExtract as Document name, "http://xxx" as namespace.
RN_360BalanceExtract will probably be your recordset, with its namespace.
More information about content conversion on sender file adapter:
http://help.sap.com/saphelp_nw04/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
I'm not sure what you mean by bound. If you mean that PI has to execute mapping you created for that DN_360BalanceExtract message type, you need to associate DN_360BalanceExtract to a message interface and then create all configuration objects and choose that message mapping when you create the interface determination object.
Regards,
Giuseppe

Configuring the Receiver File/FTP Adapter !!

Hi
I am trying to configure the Receiver file adapter using the J2SE adapter engine(Please note , NOT the J2EE adapter engine).I see a prerequisite for configuring as below
"The address (HTTP port and URL) where the adapter can be contacted from the Integration Engine".
What values are to be specified and how can they be validated ?
I could see an example given in the Docs saying below,
If i specify , say for example,
"XI.httpPort=1234 and
XI.httpService=/file/Receiver, the end point address of the file/FTP adapter in the Integration Engine must be specified as follows:
http://<fileadapterhost>:1234/file/Receiver"
Can anyone explain what exactly is this endpoint address and where should it be specified/referred to ?
Thanks
Saravana

Hi,
"http://<fileadapterhost>:1234/file/Receiver"
this adress refers to an end point with the end point type "xi-connectivity" in the integration directory (ID)which refers to the settings in the file adapter (httpPort=1234 and XI.httpService=/file/Receiver)
1. you specify these adress in the file adapter (outbound)
2. you refer to these adress in the ID (Receiver System End points)
every file adapter should have an own port, because you can not specify two identical ports in two fileadapters.
hope I could help you,
michele
Message was edited by: Michele Mangieri
Message was edited by: Michele Mangieri

Issues with Seeburger FTP adapter

Can one of you with Seeburger FTP adapter experience share some information on these issues I'm facing
1. Do I need to setup resource management in Seeburger workbench. If so, do I need to configure, resource, server and reservations. Do you have more information and what parameters I need here.
2. In the Seebuger FTP adapter, I have
Module Key - exit
Parameter Name - JNDIName
Paramter Valu - deployedAdapters/SeeXIFTP/shareable/SeeXIFTP
JNDIName, should I be replacing this with some other name. I'm trying to get Seeburger FTP to work and in the messaging monitor, I see the message as passed to Module Processor but it does go anywhere from there.
Can one you throw some light on this subject...what to expect from this definition.
Thank you for all your replies,
Parimala

I'm resending this since I did not have any luck with it the first time.
We also have an oss note waiting to be responded on this subject.
When I send messages using Seebuger FTP adapter, I see the following information in the SAP message monitor -
"Message entered module processor exit bean and will be transferred to JCA adapter".
But does not get to IBM VAN mailbox. How do I trace from this point onwards.
Should I use Seeburger monitoring tool for this? If so, I don't see anything in Seeburger monitoring (used all criteria).
Please let me know if you have any information on this subject.
Thanks,
Parimala

How to assign directory path of File/FTP adapter into a variable insideBPEL

Hi,
i need to get the directory path given to file/Ftp adapter (write/PUT) into a variable while invoking, which will be later used in some other BPEL service for processing.
i am able to get the directory path easily using "jca.file.filename/jca.ftp.filename" in case of invokin Read\GET adapter but am struggling to get these details while invoking a file/Ftp adapter (write/PUT).
kindly tell me is it possible to get these properties in case of file/Ftp adapter (write/PUT) !!!!
Thanks
Siva

These documents may be helpful in discovering the functionality/use of variables to capture some of the file adapter properties.
How to Manipulate SOA 11g Adapter Headers Using Oracle Mediator (Doc ID 1352248.1)
How to Create an Outbound File with the Same Name as the Inbound File with FTP/FILE Adapter (Doc ID 745587.1)
Hope it helps!
Amy

Error File FTP adapter

Hi,
 We need to connect to a VAN system to poll/post files. We have configured the file adapter in FTP mode, but when trying to post/poll for files, we are getting the following error:
2009-10-09 07:17:57 Error File processing failed with An error occurred while connecting to the FTP server '10.159.48.75:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Syntax errors in parameter. usage: %[recipient id]%[APRF] where either [recipient] or [APRF] can be omitted. (to change your current default SEND relationship). %% (places you in your 'HOME' TR). &['s'|'single'] ('get' command gets single file). &['m'|'multiple'] ('get' command gets multiple files). '. For details, contact your FTP server vendor.
2009-10-09 07:17:57 Error Adapter Framework caught exception: An error occurred while connecting to the FTP server '10.159.48.75:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Syntax errors in parameter. usage: %[recipient id]%[APRF] where either [recipient] or [APRF] can be omitted. (to change your current default SEND relationship). %% (places you in your 'HOME' TR). &['s'|'single'] ('get' command gets single file). &['m'|'multiple'] ('get' command gets multiple files). '. For details, contact your FTP server vendor.
2009-10-09 07:17:57 Error Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '10.159.48.75:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Syntax errors in parameter. usage: %[recipient id]%[APRF] where either [recipient] or [APRF] can be omitted. (to change your current default SEND relationship). %% (places you in your 'HOME' TR). &['s'|'single'] ('get' command gets single file). &['m'|'multiple'] ('get' command gets multiple files). '. For details, contact your FTP server vendor..
Can we directly connect to the VAN using FTP in PI, or do we need to do perform some other configuration.
Regards,
Shiladitya

Hi,
I think you need to use Seeburger's FTP adapter instead of normal FTP adapter.
Read this discussion for more information:
Re: Seeburger FTP Adapter And SAP PI 7.1
Regards,
Ravi Kanth Talagana

Use of see burger adapter replacing with File (FTP) adapter

Similar Messages

Maybe you are looking for