Use of Seqence in Tax setting

Hi experts
I want to assign different series number of documents for different location of a company like invoice from delhi location series should start form 100 and for mumbai series should start from 500. Can I use Sequence in Administration-Setup-Tax . It ask series number but does not work. Plz help me.

Hi Jitender,
Refer/study Administration/System Initialisation/Document Numbering.
Hope it helps
BR
Samir Gandhi
Edited by: Samir Gandhi on Dec 15, 2008 6:10 PM

Similar Messages

France/Germany Tax set up

Hi
What list of activity to do for france and germany tax set up(for FI,SD,MM).
Thanks in advance

Hello Sree,
The new taxes are work taxes and only need to be added to infotype 208
for employees that work in these counties.
This will work for you. IT0208 should have only NY, NY07 for an example.
Table T5UTZ and T5UTD are Delivery Class C tables, which means that SAP
only delivers the data in client 000 and it is up to the customer to
the data to the non-zero client if they desire.
You need to cassade the data from client 000 to the non-zero client.
To cascade these type of tables in your system, you can use transaction
SM30 to compare and adjust the entries as needed. Please reference the
the end of SAP Note No. 363453 - "DOC: TUB Transport, Consulting Note"
for how it is done with TUBS.
Regards,
Manny

Can I use a gmail account to set up my child's IPhone?

Can I use a gmail account to set up my child's iphone? He already has a gmail account I don't want to set up an icloud email address. My husband and I could use our gmail addresses.

You can use any email address that you like as an Apple ID - it doesn't have to be an icloud one.
My only suggestion would be to use an address that you know you will have access to for a long while - like the gmail one - so you don't have to worry about changing the Apple ID in the future.
~Lyssa

My daugther' iphone id under my wife's email and now all music and pictures are attached to that id. Wife now has an ipad and looking at using the existing id for set up? Would like to establish new id for daughter and not lose or share music/photos?

My daugther' iphone apple id is under my wife's email and now all music and pictures are attached to that id. My wife now has an ipad and I am looking at using the existing id during set up? Thus, I would like to establish new apple id for daughter, associated to her email account, however I do not want to lose or share her music/photos, nor share with my wife's id. Is this possible, or is it best just to establish a new id for my wife, and then change the email address associated with the existing apple id?

well if you establish a new apple id for your wife that would be best unless you email all of the existing photos to your email and then when you have established a new id then you log into your email on the new id and save all of your pics onto it by pressing on tthe pic for about 5-8 seconds then options will come up and you press the save to my album ..as for the music if you can copy and paste, through computer, the songs then awesome!

HT204053 I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

See https://discussions.apple.com/message/19218571#19218571.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

Can I use my Time Capsule to set up multiple networks, or just one?

Can I use my Time Capsule to set up multiple networks, or just one? We'd like to offer the internet to clients who are at our studio, but don't want them able to access all our computers, so a second network for them would be useful.

Two big IFs here.
Not all versions of the Time Capsule have Guest Networking capability, so it might be a good idea to verify that first. Can you provide the model number of your Time Capsule. it's on the bottom of the device.....starts with an "A" followed by four numbers.
Next, assuming that the Time Capsule has Guest Network capability, the next requirement would be to verify that your modem is compatible with the Time Capsule for that feature.
Basically, you need a simple modem.....not a modem/router or gateway device that is often furnished by Internet Service Providers. If you are not sure what you have, post back with the make and model number of your "modem" and we'll see if we can find some details ont he device.

Unable to Sync emails to car's HU over bluetooth. I am using iphone 5 and have set up a gmail account on it. Also, the basis notification settings mentioned on some site have been done.Can someone answer it?

Unable to Sync emails to car's HU over bluetooth. I am using iphone 5 and have set up a gmail account on it. Also, the basis notification settings mentioned on some site have been done.I tried doing the following still the email sync is not working.?
Here's the step by step:
1. Go to Settings --> Notifications --> Mail --> Select any of your email accounts
2. Notification Center: ON
3. Alert Style: Banners or Alerts (I've only tested it to work with Banners...)
4. Show Preview: ON
5. View in Lock Screen: ON

Hi uneleashurself and thanks for your answer.
Forgive my language but getting to talk to the Safaricom customer service is a real pain in the **bleep** - if you ever get to talk to them, that is.
I've never got an answer to my phone calls in three years and their customer assistans in the shops usually have no clue about whatever it is you're asking them.
I talked to a few of them in a couple of different Safaricom shops and they didn't know what I was talking about.
Still, I believe Safaricom is not the problem as other people I know who have a BlackBerry on Safaricom haven't experienced this problem.

Hi, I am using Indesign CS6, How to set the page size in Inches.

Hi, I am using Indesign CS6, How to set the page size in Inches.

All fields in InDesign can be entered in any measurement system. So, if you want to make an 8"x10" document and go to File>New Document and the window looks like this:
…you can type either 8 in or 8" into the Width field like this:
…and when you move to the next field, it will convert the eight inches into the equivalent number in the unit of measure that it is using at the moment, like this:
… (203.2 milimeters is the same as 8 inches). You can also enter a different measurement unit into other fields once the file is created, such as the width or height of a frame, or the position of an object in the X and Y coordinates.
If you would rather just work in inches instead of having to type the inches mark or abbreviation, go to InDesign>Preferences>General and select the Units & Increments tab. There you will see Ruler Units for Horizontal and Vertical at the top of the window. Set them to Inches and all of the fields will display in inches. If you do that to an open document, you will change the unit of measure for that document. If you do it while no documents are open, it will change the unit of measure for any new documents you create. To change the unit of measure for existing documents, you will have to open each and make the change.

How to use union statement with declare & set function?

Hi Experts,
i have small query about how to use union statement with declare & set function?
Example as below :
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]

You have to create stored procedure in SQL only .
Like u must have create for Crystal .
You can execute procedure in query manager but you have to enter parameter manually..
example
Exec @Test '20140101' '20140501'
Every time user has to enter it manually in yyyymmdd format in case of date parameters.
Example
Create Proc [@Test]
as begin
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between @Name and @Name2
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between
between @Name and @Name2
end

Using applescript how do I set the angle of a gradient

Using Applescript I need to set the angle of the gradient to 90 degrees. I've tried everything I can see in the scripting guide.
This is a sample of the script I'm using to set the gradient all I need to know is where and how to set the gradient to horizontal. Please forgive me as I'm a real newbie at this!!!
tell application "Adobe Illustrator"
    activate
    make new document
    set ellipseRect to {100, 100, 500, 500}
    set ellipseColor to {cyan:0.0, magenta:100.0, yellow:100.0, black:0.0}
    set myellipse to make new ellipse at beginning of current document with properties {bounds:ellipseRect, inscribed:true, reversed:false, stroke color:ellipseColor, fill color:ellipseColor}
    set Doc_Ref to the current document
    tell Doc_Ref
        if not (exists gradient "My Gradient") then
            set This_Gradient to make new gradient at end with properties ¬
                {name:"My Gradient", gradient type:linear}
            set properties of gradient stop 1 of This_Gradient to ¬
                {midpoint:50, ramp point:0.0, color:{cyan:0, magenta:50, yellow:100, black:0}}
            set properties of gradient stop 2 of This_Gradient to ¬
                {midpoint:50, ramp point:100.0, color:{cyan:10, magenta:100, yellow:100, black:0}}
        end if
        if exists path item 1 then
            set fill color of every path item to {gradient:gradient "My Gradient"}
        end if
    end tell
end tell

I think I the gradient angle property is broken, try rotating the object setting all the "change" properties to false, except changeFillGradients.
rotate
(angle
[,changePositions]
[,changeFillPatterns]
[,changeFillGradients]
[,changeStrokePattern]
[,rotateAbout])

WHAT IS TOTAL TAXES SET-OFF ?

Dear All ,
i m in display mode of a P.O here at item level in condition tab here JMOP =16% of 50,000 base price is 1,000INR & qty is 50, is 8,000inr , JEC1 is 2 % of 8,000 is 160.00inr , & 1% of 160 is 80.00inr , but here total taxes set off is calculated as 164.80, im not geting how this 164.80 is calculated , can ne one help me out.
sap11
Edited by: sap11 on Apr 9, 2008 12:09 PM

my [probl;em is solved as i was confuse actually this 164.80 for 1 qty is the total of JMOPJEC1JSEP & for 50 pcs it is 58,240 so i have divided 8240 by 50 hence the total set off for 1 pc is 164.80.
sap11

HT4157 Can I use iTunes gift cards to set up cellular data

Can I use iTunes gift cards to set up cellular data

No cellular data depends on The carrier, not Apple. Gift cards are only for iTunes and AppStore purchases and in app purchases.

Just got a used airport base station. Set it up and getting wif signal. when I try to hook up on a computer it asks for a security key. where can I locate key?

just got a used airport base station. Set it up and getting wif signal. when I try to hook up on a computer it asks for a security key. where can I locate key?

If you mean the hexidecimal equivalent of the alphanumeric password, then you can find this via the AirPort Utility, as follows:
AirPort Utility > Select the AirPort > Manual Setup
On the AirPort Utility's menubar select Base Station > Equivalent Network Password

How to use shared parameter on request set

Hi
I have a request set with two stages
First stage contains From Date and To date where i have named the shared parameter as StartSP and EndSP
i have to use these shared parameter in one of the query in next stage where my Type is SQL Statment and i have these two date fields From date and To date in next stage as well where i am able to retirve the values from previous stage
based on these values i need to get the name in next parameter where my Type is SQL Statment
select name from tablename where '02-MAR-09' > =start_Date and '29-MAR-09' <=end_Date
I have written SQL as
select name from tablename where StartSP > =start_Date and EndSP <=end_Date but it throws an error.
I need the values of 02-Mar-09 and 29-Mar-09 from StartSP and EndSP
Appreciate if any one has idea about this.

hi user;
please check:
http://download-west.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/repset04.htm
http://download-east.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/10gch609.htm
Also you can check this search:http://www.google.com.tr/search?hl=tr&source=hp&q=How+to+use+shared+parameter+on+request+set+&meta=&aq=f&oq=
Hope it helps
Regard
Helios

Use of Seqence in Tax setting

Similar Messages

Maybe you are looking for