Use of SRM confirmations for only Product type Services

In our current implementation the requirment is not to allow confirmations on product type material.  Is there any way we can restrict confirmation to only services.
Thanks

Hi,
You can take care of it manually by removing the check from 'confirmation required' check box.
Or, you can take the help of BBP_DOC_Change_BAdi.
regards,
Ranjan

Similar Messages

  • How to use BAPI function module for maintaing product type to material

    Hi,
    Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
    for maintaining the product type for the material using change number.
    Pts will be rewarded.
    Best Regards,
    Padhy

    Hi,
    Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
    for maintaining the product type for the material using change number.
    Pts will be rewarded.
    Best Regards,
    Padhy

  • DB-Table PO for time to confirm for each actvity type (operation)

    Hello All,
    I search the DB-Table for the time to confirm for each activity type (operation/production order).
    (CO03>operation details>qty/activities-->to confirm).
    I have found the following tables - but without success:
    AFRU
    AFVC
    AFVV
    PLPO
    I search not the standard vals (AFVV). Who can help me?
    Thanks & regards
    Sascha

    Sascha,
    Table AFVV has the details:
    Standard Values:
    VGE01     VGWRTEH     UNIT     3     0     Unit of measure for the standard value
    VGW01     VGWRT     QUAN     9     3     Standard value
    VGE02     VGWRTEH     UNIT     3     0     Unit of measure for the standard value
    VGW02     VGWRT     QUAN     9     3     Standard value
    VGE03     VGWRTEH     UNIT     3     0     Unit of measure for the standard value
    VGW03     VGWRT     QUAN     9     3     Standard value
    VGE04     VGWRTEH     UNIT     3     0     Unit of measure for the standard value
    VGW04     VGWRT     QUAN     9     3     Standard value
    VGE05     VGWRTEH     UNIT     3     0     Unit of measure for the standard value
    VGW05     VGWRT     QUAN     9     3     Standard value
    VGE06     VGWRTEH     UNIT     3     0     Unit of measure for the standard value
    VGW06     VGWRT     QUAN     9     3     Standard value
    For actual values confirmed:
    ILE01     CO_ISMNGEH     UNIT     3     0     Unit of measure for the activity to be confirmed
    ILE02     CO_ISMNGEH     UNIT     3     0     Unit of measure for the activity to be confirmed
    ILE03     CO_ISMNGEH     UNIT     3     0     Unit of measure for the activity to be confirmed
    ILE04     CO_ISMNGEH     UNIT     3     0     Unit of measure for the activity to be confirmed
    ILE05     CO_ISMNGEH     UNIT     3     0     Unit of measure for the activity to be confirmed
    ILE06     CO_ISMNGEH     UNIT     3     0     Unit of measure for the activity to be confirmed
    Hope this is useful.
    Regards
    Ram

  • CUCM 9.1 in VirtualBox - The hardware you are using is not supported for this product

    I'm trying to load CUCM licensed through my work onto an oracle VirtualBox running linux redhat, and its unpacking linux fine onto the vbox, and passes the hardware test on boot but when it goes to load I'm getting the error "The hardware you are using is not supported for this product."
    I have dedicated to the VM:
    4GB ram
    4 CPU's (tried 2 and 4)
    80GB Hard Drive
    What in the world could be jamming this up? Anyone else ever run this or know what the deal is?
    Any input is appreciated, thanks!

    We only support ESXi
    Sent from Cisco Technical Support iPad App

  • Capacity for only Production orders only.

    Hi
    I am checking capacity loads in CM01.
    In this t-code its considering my Planned orers also.
    I want to capacity load for production orders only.
    we dont want during planned orders stage.
    where can i check.. what are the settings i have to do for checking capacity for only production orders.
    Regards,
    srihari.M

    Srihari,
    This is a standard requirement.
    Planned orders in a non-repetitive environment typically are not dispatched nor confirmed.  They do not, therefore, become part of the 'Basic Load'.  The capacity requirements of planned orders are there mostly so you can view the capacity requirements in sum with the production order capacity requirements (CM01 and similar).  They do not 'consume' from total available capacity.  When performing a capacity check of a production order, it will not 'see' the capacity requirements of the undispatched planned orders.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/60/13e30b133a11d3bf550000e83235ee/frameset.htm
    Best Regards,
    DB49

  • DISALLOW PRODUCT TYPE SERVICES

    We have implemented SRM5.0 Extended Classic Scenario and only want to allow procurement of product type "material".
    How do I remove Product type "services" from the Shopping cart and purchase order create screen in order to only have product type "material" as a selectable option?

    Hi,
      Which screen do you want to change the radio button?While creating the SC,you can modify the Product search screen so as not to display the Services else to change the radio button display you may have to modify the screen templates.
    BR,
    Disha.
    Pls reward points for useful answers.

  • Add set type COMM_PR_SHTEXT to product type Service

    Hi anyone,
    I am trying to add the set type COMM_PR_SHTEXT into a category typed "Service".
    I am using the transaction COMM_HIERARCHY.
    The problem is when I try to adding the set type (COMM_PR_SHTEXT) doesn't appears it in the matchcode to be selected.
    Does anyone knows any solution ?
    Thanks in advance.
    Regards

    Hello,
    It is possible to add the settype to a single category within a Product Hierarchy per product type.
    Also, child categories will inherit this assignment by default.
    So, looks like settype COMM_PR_SHTEXT has already been assigned to a category within that
    hierarchy for that product type.
    You can check this out using table COMC_SETTYPE and COMM_CATFRGR.
    So, solution would be to remove the assignment of settype from other category within that hierarchy and re-assigning to the required category. But this is not allowed, if there already exists data for that category.
    Other option is try to create new category under the parent category to which that settype is already assigned, so that new category can inherit the settype.
    Best Regards,
    Shanthala.

  • Transfer material type DIEN in ECC system to CRM product type Service

    Hi Experts,
    I have a requirement to transfer material type DIEN in ECC system to CRM product type Service.
    How can we do this?

    Hi Viswanath,
       I dont think its possible to replicate material type DIEN from ECC to CRM Service Product.
       Service Products need to created in CRM, from here transfer to ERP. To transfer service product from CRM to ECC, you need to enable upload for Service Product in SPRO.
           Customer Relationship Management -->
                 Master Data -->
                        Products -->
                            Settings for Product Type -->
                                    Allow Upload for a Product Type.
       Now here select the check box for product type 02(service).
      To send product from CRM to ECC, open the product you need to send it to ECC in COMMPR01.
             Go To -> Transfer to ERP. Here give the ECCRFC Destination and mapping material type.
    //Bhanu

  • ECC dien material to CRM product type service

    Hi Experts,
    I have a requirement to transfer material type DIEN in ECC system  to CRM product type Service.
    How can we do this?

    Hi Viswanath,
       I dont think its possible to replicate material type DIEN from ECC to CRM Service Product.
       Service Products need to created in CRM, from here transfer to ERP. To transfer service product from CRM to ECC, you need to enable upload for Service Product in SPRO.
           Customer Relationship Management -->
                 Master Data -->
                        Products -->
                            Settings for Product Type -->
                                    Allow Upload for a Product Type.
       Now here select the check box for product type 02(service).
      To send product from CRM to ECC, open the product you need to send it to ECC in COMMPR01.
             Go To -> Transfer to ERP. Here give the ECCRFC Destination and mapping material type.
    //Bhanu

  • HT5616 How can you see a list of devices registered to use our apple ID for FaceTime and other services?

    Sometimes I will get a notification that x device is using my apple ID for FaceTime (or other services). Sometimes it is just generic Mac Book Pro. His can I see which devices are using my ID (and can you see more details than just the name)?

    I just started getting this message too.  Just started the last couple of days.  It doesn't give a time that it was used.  All it says that "appleid" was used to sign in to facetime on Macbook.  My Macbook is not named "Macbook."  It also doesn't correlate to times when computer is being used.

  • Restricting SRM confirmations to select PO types

    Hi all,
    We are on SRM 7 , ECS scenario.
    We have single SC type but have created different PO types in SRM , and used BADI to convert SC to different PO type , like consumable PO, service PO, etc, based on some logic.
    Now we want all the requisitioners to do the SRM confirmation only for service PO , not for consumable PO , and other PO. How can we achive this ?
    Rgds
    Sumendra

    Hi Sumendra,
    This can be easy.
    Pl implement BBP_DOC_CHECK_BADI, where you can throw an error if user selects PO from any other PO type.
    Best regards,
    Ramki

  • EDI Standard used in SRM-SUS for Purchaser - Vendor Document Exchange?

    Hi Forum,
    For exchange of electronic documents like ASN, PO, PO Response, Confirmations etc. between buyer and seller, which EDI standard is used in SRM-SUS?
    Say there are two different vendors one from North America using ANSI X 12 as EDI Standard and other from Europe using EDIFACT, how is the document exchange handled for these two different seller / edi standard in same SUS system?
    Thanks,
    Anubhav

    Hi,
    I am not sure what standard SAP uses, but it is not really relevant. At least not for the SUS scenarios. The IDOCs from ECC will be sent to the PI system which will convert them to XML format and send it to the SUS system. Since both PI and ECC system are from SAP, they will speak the same EDI standard for sure.
    For SUS we have two scenarios, SRM-SUS and MM-SUS. In SRM-SUS the PO is created in an SRM system locally and sent to SUS. All communication will take place between these two system via XML messages on both sides (of course a PI system is mandatory in this case as well).
    In the MM-SUS scenario the PO will be created in ECC and transferred to SUS. Depending on ECC release there are two different possibilities for this, either the ECC system sends EDI IDOCs or it sends XML messages directly. IDOCs will be mapped to XML by PI in all cases, as the SUS system will always receive and send XML messages only.
    regards
    Zoltan

  • Sales Order Unable to Use New Condition Tables for Tax Condition Type

    Dear All,
    I am currently working on SAP R/3 4.0. I have a new requirement for my tax where I need to create new condition tables other than the 4 standard SAP tables which are Customer/Material, Division/Customer, Departure Country/Destination Country, Domestic Taxes and Export Taxes. My new tables consists of Departure Country/Destination Country/Shipping Point/Tax Code. The requirement is that the tax code is based on the chosen destination country and shipping point. The problem I am facing now is that no matter what types of table I create or even I generate with reference to the standard table, the access sequence will only refer to the 4 standard SAP tables above. Even if I put my own table in the highest priority for the access sequence, the same thing happens. My sales order will only pick up date from the standard table.
    I wonder if anyone encountered the same problem as me.
    Kindly advise.
    Thank you.
    Regards,
    Yvonne

    Hi
    Yvonne
    I suggest fist check a simple thing ,whether u have successfully determined shipping point for each line item ,it is possible that just adding a line item will not trigger shipping point determination . So after u update the shipping point on line level u can rerun pricing and check agian if u r getting it .
    Secondly for tax purposes I suggest   Try to have Customer and material tax classification approach  this allows to u have long term flexibiliy and also reduces your maintenance activity . As if u change or add number of shipping points and business changes using the sequence of shipping point ,the logic of just using shipping point will not work.
    In Tax classification u cna add new condition table for each new tax category and use it in different access sequences.
    This information can be passed on to FI using Different Tax code for Different combination.
    I hope this helps
    Regards
    Mandar

  • What are the dimensions, material, colors, print method used to make the collateral box used as a cover for Apple products?

    Production management students are continuously working towards improving your survey experience. I've been assigned a project from my professor that requires me to identify: Materials, Color/Ink used to produce a product.
    What types of Materials are used in box for your product?
        iPhone 4 cover box                                                 iPhone 5s cover box                                        iPhone 6 cover box
    What colors were used for the dye stamps or to include text unto boxes?
    What Ink/paper was used on the boxes or paper?
    Startup tutorial paper                                              Apple sticker logo paper

    This is a user-to-user forum, so they won't answer you here.

  • How can I use srvctl command line for change "Failover type" and "F method"

    Hi all,
    I am using Oracle One Node (11.2.0.3), and I have a service:
    /u01/11.2.0/grid/bin/srvctl config service -d orcl
    Service name: orcldb
    Service is enabled
    Server pool: orcl
    Cardinality: 1
    Disconnect: false
    Service role: PRIMARY
    Management policy: AUTOMATIC
    DTP transaction: false
    AQ HA notifications: false
    Failover type: NONE
    Failover method: NONE
    TAF failover retries: 0
    TAF failover delay: 0
    Connection Load Balancing Goal: LONG
    Runtime Load Balancing Goal: NONE
    TAF policy specification: BASIC
    Edition:
    Preferred instances: orcl_1
    Available instances:
    I would like to change "Failover type" and "Failover method" to:
    Failover type: SELECT
    Failover method: BASIC
    How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
    Thanks in advance.
    Leonardo.

    user10674190 wrote:
    Hi all,
    I am using Oracle One Node (11.2.0.3), and I have a service:
    /u01/11.2.0/grid/bin/srvctl config service -d orcl
    Service name: orcldb
    Service is enabled
    Server pool: orcl
    Cardinality: 1
    Disconnect: false
    Service role: PRIMARY
    Management policy: AUTOMATIC
    DTP transaction: false
    AQ HA notifications: false
    Failover type: NONE
    Failover method: NONE
    TAF failover retries: 0
    TAF failover delay: 0
    Connection Load Balancing Goal: LONG
    Runtime Load Balancing Goal: NONE
    TAF policy specification: BASIC
    Edition:
    Preferred instances: orcl_1
    Available instances:
    I would like to change "Failover type" and "Failover method" to:
    Failover type: SELECT
    Failover method: BASIC
    How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
    Thanks in advance.
    Leonardo.srvctl modify service -d database_name -s orcldb -q TRUE -m BASIC -P BASIC -e SELECT -z 180 -w 5 -j LONG
    Also see
    11gR2(11.2) RAC TAF Configuration for Admin and Policy Managed Databases [ID 1312749.1]

Maybe you are looking for