Use of Tcode : FRFT_TR

Hi,
What is the Use of Tcode : FRFT_TR
For what purpose, it can be use...
Regards,...

Hi Anil
This T.Code normally we are using it in Treasury management (Bank accounting)
FRFT_TR u2013 Payments to Business Partner Payment with Repetitive Code
By using this code  outgoing payments possible.
Rds,
Anil

Similar Messages

  • Use of tcode file

    what is the use of tcode file????
    what is platform independent file name????

    Platform Independent File path: The actual (Physical) file name/path is always dependent on hardware and OS of the system. Now In this transaction define a Logical name of a file and map it to your specific system specific actual path.
    Now in your coding you can use the logical name. When you use the same come in a different system you need not change the logical name to everywhere you have coded. The Logical name will be same, only in FILE transaction you will change the mapping of Logical File name to actual file path.
    Check the following Link :
    http://help.sap.com/saphelp_erp2005/helpdata/EN/8d/3e4edc462a11d189000000e8323d3a/frameset.htm
    Example:
    Suppose in your application server you created a file and give a logical name as AIRS_PATH. But when you want to access the file you need to know the actual physical path to it. That path may be ‘c:\temp\<FILENAME>’. Now in FILE transaction you mapped AIRS_PATH to c:\temp\<FILENAME>.
    So whenever you try to access AIRS_PATH, the system know that you want to access the c:\temp\<FILENAME>.
    Now may be you want to run your code in a different system and different hardwre. And the file is stored there in ‘c:\temp\temp1\<FILENAME>’ path. So then in that system you need to map AIRS_PATH with ‘c:\temp\temp1\<FILENAME’.
    Now while coding you are not actually familiar or bother the actual file path. You will do your coding based on AIRS_PATH. And that is same in all the system only the mapping need to change. Thus you can achieve the system independence.

  • What is the use of tcode lbwq

    Hi all,
    can u please explain me the use of tcode lbwq in lo-cockpit extractions.
    Thanks in advance.......

    Dear Rakesh,
    Whenever you are working with LO extraction , and if your  Update Mode for Delta is Queued Delta,then all the records that are being changed or created for a particular Application for a successful initialization ,sits in a Queue ( Extraction Queue or Outbound Queue ) in the form of LUW's . These needs to be transferred to the Delta Queue , as the Delta is always accepted by BW only if it passes through the Delta Queue ( RSA7) , for this we schedule a Backgrd job ,which we call as V3 Collective Update Run ,which transfers the records ( LUW's per Datasource ) from Outbound Queue to the Delta Queue .
    Hope it helps.
    Thanks,
    Krish
    *Assigning points is way of saying thanks in SDN

  • What is the use of TCode: OOSE

    Hi,
    Can i know what is the use of TCode: OOSE
    Where i can see a list of entries, let me know what is the use of these option.
    When we would be using it.
    Regards
    Rajesh

    Hi Rafiqh,
    Thanks for your quick response.
    What do you mean by switch, if you can provide me with some example it would be gr8.
    Appreciate your early response.
    Regards
    Rajesh

  • What is the use of Tcode: SM35

    Hi Experts,
    What is the use of Tcode: SM35
    If some one can brief me in detail it would be great help.
    Appreciate your early response.
    Regards
    Rajesh

    Hi Rajesh,
    SM35 is used to run Batch input sessions.
    These sessions can be created via LSMW or any batch-input ABAP program.
    To run a session, select the session and press "Process".
    You can either process foreground (as if you are entering the data), display errors only (runs in background as far as there is no error), background (you need to check the errors when the session is over).
    Regards,
    Dilek
    Edited by: Dilek Ersoz Adak on Dec 16, 2009 4:19 PM

  • What is the use of tcode mrrl

    Dear Experts,
    what is the use of tcode mrrl
    Pls give a solution...
    Kind Regards
    Sajid

    Hi Shaik
    When you want to do the automatic settlement.....using ERS
    you will use the MRRL transaction code to settle the invoice.... it will generate the credit note in background.
    In Automatic settlement you wont receive the Invoice from the vendor....
    REgards
    anand

  • What is the use of Tcode : FBE1  ?

    Hi,
    What is the use of Tcode : FBE1  ? with example please.
    Regards.

    Hi,
    FBE1 is used for creating payment advices. You can create payment advices for both vendor and customer. Generally this information you will receive from customers, based on that you can create payment advices. Once payment advices are created, you can use these payment advices when the actual payment information comes from bank statement. By the help of payment advices you can identify the open items based on that you can clear the items.
    Hope u understood.
    Regards
    Srikanth

  • What is the use of tcode mb1c

    hi
    what is the use of tcode mb1c
    pls reply
    thanks in advance

    Hi Ashok,
    The transaction MB1C is used to add the no. of stock to a material.In MIGO transaction you can post all or some of these stock of the material.

  • USE of Tcode SHD0

    Hi expert .
    i am working on Tcode  SHD0 . i m stuking on screen varient . and transaction varient . so let me know how could i use this  tcode in a proper way .
    Thanks
    chandra shekhar singh

    Dear,
    Follow step by step process for SHDO:
    Go to transaction SHD0. 
    Enter the transaction code MM01. Now click on button CREATE.
    Following information message would appear:
    Click Enter to proceed. 
    Now the MM01 transaction would appear. 
    Select the required Industry sector and Material Type and press ENTER. Following popup would appear: 
    Now make the modifications as shown below: 
    Click on u201CExit and Saveu201D. 
    Following popup would appear:
    Click Enter to proceed. Following screen would appear:
    Save your entries and go back to the main screen.
    Now enter the transaction variant name and click on Change button as shown below:
    Now click on Insert Row. 
    Enter the name of the screen variant created earlier or use F4 help to select the value:
    Now click on Goto à Create Variant Transaction 
    Enter the values as shown above. Click on Enter. The following SE93 transaction would appear: 
    The name of the Transaction Variant is automatically proposed. Save your entries. 
    Now go to Transaction ZMM01 and check your transaction variant:
    You can observe that the field Industry sector and Material type default to the value we have given earlier and are output enabled only.
    This i have copied from my Documents in which i have screen shots for the images also...Unfortunately it did not copied above.
    But still if you follow above instructions, it will work.
    Regards
    Utsav

  • Use of Tcode: UPX_MNTN and UPX_MNTN1

    Hi,
    Can anybody give me idea what is the use of Tcodes:  UPX_MNTN and UPX_MNTN1.
    It would be great help for me.
    will assign the points.
    thanks
    BPS

    Hi consult following as well:
    Layout missing in UPX_MNTN
    Also check the following threads for more information on how to use this transaction:
    SEM-BPS enhancement layout
    Enhanced Planning Layouts in BW-BPS possible?!?
    regards
    D

  • Using the tcode:S_ALR_87013611, no report data  for the cost center

    Hi,Friends.I need a help.
    In the tcode FB60,i entered the following data and then posted the vendor inovice sucessfully.
    data:
    ( Note: G/L acct:55020141 is also a primary cost element)
    In the tcode:S_ALR_87013611,I entered the following data and executed.
    but the result is:{Report contains no data. Check the selection log}.
    data: { Controlling Area: C999, Fiscal Year: 2010, From Period:1, To Period:12,Plan Version:0,
            Or value(s):2001}
    (Note: Cost center:2001 belongs to Controlling Area: C999) 
    please tell me how to do,so that using the tcode:S_ALR_87013611, I can see the report data  for
    the cost center 2001.
    sincerely                      WenYao Ma
    Edited by: wenyao ma on Mar 22, 2010 1:09 PM

    thank you,friends.
    I just solved it.
    Solution:
    1) Maintain Controlling Area
       path:spro>Controlling>Organization>Maintian Controlling Area>Maintain Controlling Area.   tcode:OKKP
    In the {Activate components/control indicators}cost center should be 'component active'
    2) Maintain Number Ranges for Controlling Documents
       path:spro>Controlling>Organization-->Maintain Number Ranges for Controlling Documents.   tcode:KANK
      Element { COIN CO Through-postings from FI} should be assigned to one group.

  • Appropriation down payment AuC using F110 tcode

    Hello, I have a problem to appropriate down payment for AuC using F110 tcode:
    We work with CJ20N> Project Builder> WBS Element> Network> activity> Purchase Requisition.
    With the transaction ME21N> creation of the Purchase Order with reference to the Purchase Requisition.
    With the purchase order placed, we are committed to the project equal to the value of the purchase order.
    With the F-47 created a request for "down payment" and the F-48 or F110 consolidated the "down payment " and does not change the value committed in the "WBS element ". That's right..
    The Value of the down payment is appropriate when the WBS element is filled in the field "WBS Element" (F-47 Tcode) and execute the F-48 tcode with reference to the doc's F-47.
    In F110 tcode (created as a reference to the doc's new F-47) do not have field to fill the WBS element, which carries an appropriation of the down payment to "Network Object" which is assigned to the Purchase Order.
    When the CJ88 is executed (if the F-48 is used), the costs of down payment is appropriate to the AUC correctly.
    If the CJ88 is performed (when the F110 is used) can not appropriate the value of down payment to the AUC.
    We need the same functionality as the F-48 T Code in F110 once the scenario where our clients do not want to use the F-48 but the F110 Tcode.
    Can anyone help me?
    Thanks for your attention.
    Vitti
    SAP Consultant IM_PS

    This is very much possible.
    But need some config. changes
    Please go to FBZP
    Select all company codes tab
    Select your Company code and double click it.
    Here under Vendor tab you have to enter all the special GL indicators whatever possible for your transactions.
    Now come to F110 screen, under free selection tab through document you can select special GL indicators.
    Here you have to give sp. GL indicator which you have used in your F-47 screen for your AUC accounts.
    A/C entry would be
    Vendor a/c Dr(GL-Down payment made to assets through Sp. GL Indicator)
    Bank a/c Cr
    Rgds
    Murali. N

  • Advantages of using OPPQ tcode

    Hi ,
    We use OPPQ tcode to maintain MRP parametes with respect to a specific plant and we also have individual tcodes to maintain MRP paramters - like "MRP Controllers, Planning Horizon,Floats,Rescheduling etc". Is there any specific reason/advantages to use OPPQ tcode to maintain MRP parameters instead of using individual tcodes to maintain MRP parameters?. Thanks in advance.

    Using OPPQ we can copy the MRP parameters of an existing plant to a newly created plant in one-go.
    If we know the parameters of an existing plant it makes sense to copy it directly through this txn instead of individual maintenance.Also any 'particular' data can be changed as per your requirement in the new plant easily.
    Apart from the above advantage the 'reference plant' option in OPPQ helps us in reduced data maintenance w.r.to 4 parameters namely Plg cycle/Plg calendar/ROC profile/Rounding profile.
    All we need is to create the data in reference plant which is then made available for the planning/new plant automatically.

  • Is possible work with boleto from SmartForm using the Tcode FBZP  ?

    HI,
    SAPScript bar code output in PDF format
    As a SAP does not intend to deliver this solution for SAPscript  because The report - RSTXPDFT4 does not work correct to bar code in the boletos (Brazil) when convert to PDF, we are going to change to Smart Form.
    The problem now.....Does someone know if is possible use this boleto from SmartForm using the Tcode FBZP ?
    Here in the customer there were a lot of problems about bar code (Critical) and in the past the Basis consultant had problems to import all Basis Support Packages and kernel patches in Release 4.6C.
    if someone can help me, I really apreciate.
    Since now....Thank you !!!!!!
    Best regards,

    Hello!
    SAP doesn´t have a SMARTFORM for boleto. We're sorry, but  you can´t put a barcode on a SMARTFORM for the boleto in the standard system.
    REgards,
    Renan Correa

  • How to handle the errors using RSRV tcode

    Hi all,
           Could any one give tell me how to handle the errors,(if possible give me some example errors)and correct the errors using RSRV tcode.
    Thanks & Regards,
    Aswini.

    Hello Aswini,
    For further details on RSRV go through the link:
    http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
    Hope it helps
    Cheers
    SRS

Maybe you are looking for